05-Web configuration examples (AC+fit AP)

HomeSupportDoc SetsDoc PackagesH3C Wireless Products All-in-One-6W10005-Web configuration examples (AC+fit AP)
Table of Contents
Related Documents
40-Radio-Based Session-Mode Load Balancing Configuration Example

 

H3C Access Controllers

Comware 7 Radio-Based Session-Mode Load Balancing

Configuration Example

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Copyright © 2022 New H3C Technologies Co., Ltd. All rights reserved.

No part of this manual may be reproduced or transmitted in any form or by any means without prior written consent of New H3C Technologies Co., Ltd.

Except for the trademarks of New H3C Technologies Co., Ltd., any trademarks that may be mentioned in this document are the property of their respective owners.

The information in this document is subject to change without notice.



Overview

The following information provides an example for configuring radio-based session-mode load balancing.

Prerequisites

The following information applies to Comware 7-based access controllers. Procedures and information in the examples might be slightly different depending on the software or hardware version of the H3C access controllers.

The configuration examples were created and verified in a lab environment, and all the devices were started with the factory default configuration. When you are working on a live network, make sure you understand the potential impact of every command on your network.

The following information is provided based on the assumption that you have basic knowledge of radio-based session-mode load balancing.

Example: Configuring radio-based session-mode load balancing

Network configuration

As shown in Figure 1, AP 1 and AP 2 are managed by the AC and the clients can discover the APs. Client 1 associates with AP 1, and Client 2 through Client 4 associate with AP 2.

Configure the AC to perform radio load balancing on radios of AP 1 and AP 2 when the following conditions are met:

·     The number of sessions on a radio of an AP reaches 3.

·     The session gap between the radio and the radio that has the fewest sessions reaches 2.

Figure 1 Network diagram

 

Procedures

Configuring basic features on the AC

Configure AP access, wireless service, and radio settings. (Details not shown.)

Configuring load balancing

1.     Click the Network View tab at the bottom of the page.

2.     From the navigation pane, select Wireless Configuration > Radio Management.

3.     Click the Load Balancing tab and click the More button  in the Global settings area.

a.     On the page that opens, select on and Session.

b.     Enter 3 and 2 in the Session threshold and Session gap threshold fields, respectively.

Use the default values in the Max denials and RSSI threshold fields.

c.     Click Apply.

Figure 2 Configuring load balancing

 

Verifying the configuration

1.     Configure Client 5 to access the WLAN in the nearby area of AP 2.

2.     Click the Network View tab at the bottom of the page.

3.     From the navigation pane, select Monitoring > Clients.

4.     Verify that the number of clients associated with AP 1 has increased by 1.

Related documentation

H3C Access Controllers Web-Based Configuration Guide

  • Cloud & AI
  • InterConnect
  • Intelligent Computing
  • Security
  • SMB Products
  • Intelligent Terminal Products
  • Product Support Services
  • Technical Service Solutions
All Services
  • Resource Center
  • Policy
  • Online Help
All Support
  • Become a Partner
  • Partner Resources
  • Partner Business Management
All Partners
  • Profile
  • News & Events
  • Online Exhibition Center
  • Contact Us
All About Us
新华三官网