05-Web configuration examples (AC+fit AP)

HomeSupportDoc SetsDoc PackagesH3C Wireless Products All-in-One-6W10005-Web configuration examples (AC+fit AP)
Table of Contents
Related Documents
38-Radio Management Configuration Example
Title Size Download
38-Radio Management Configuration Example 114.54 KB

 

H3C Access Controllers

Comware 7 Radio Management

Configuration Example

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Copyright © 2022 New H3C Technologies Co., Ltd. All rights reserved.

No part of this manual may be reproduced or transmitted in any form or by any means without prior written consent of New H3C Technologies Co., Ltd.

Except for the trademarks of New H3C Technologies Co., Ltd., any trademarks that may be mentioned in this document are the property of their respective owners.

The information in this document is subject to change without notice.



Overview

The following information provides an example for configuring radio management.

Prerequisites

The following information applies to Comware 7-based access controllers. Procedures and information in the examples might be slightly different depending on the software or hardware version of the H3C access controllers.

The configuration examples were created and verified in a lab environment, and all the devices were started with the factory default configuration. When you are working on a live network, make sure you understand the potential impact of every command on your network.

The following information is provided based on the assumption that you have basic knowledge of radio management.

Example: Configuring radio management

Network configuration

As shown in Figure 1, create a manual AP and set the radio mode, working channel, and maximum transmit power to 802.11gn, channel 11, and 19 dBm, respectively.

Figure 1 Network diagram

 

Procedures

1.     Click the Network View tab at the bottom of the page.

2.     From the navigation pane, select Wireless Configuration > Radio Management.

3.     Click the More icon  in the upper right corner of the Radios for all APs area.

4.     Click the Edit icon  for radio 2.4GHz(2) of AP ap1 and configure the radio as follows:

¡     Set the radio mode to 802.11n(2.4GHz).

¡     Set the working channel to 11.

¡     Set the maximum power to 19 dBm.

¡     Select On from the Status field.

Figure 2 Configuring basic radio settings

 

Verifying the configuration

1.     Click the Network View tab at the bottom of the page.

2.     From the navigation pane, select Wireless Configuration > Radio Management.

3.     Verify that the radio is configured correctly.

Figure 3 Verifying the configuration

 

Related documentation

H3C Access Controllers Web-Based Configuration Guide

  • Cloud & AI
  • InterConnect
  • Intelligent Computing
  • Security
  • SMB Products
  • Intelligent Terminal Products
  • Product Support Services
  • Technical Service Solutions
All Services
  • Resource Center
  • Policy
  • Online Help
All Support
  • Become a Partner
  • Partner Resources
  • Partner Business Management
All Partners
  • Profile
  • News & Events
  • Online Exhibition Center
  • Contact Us
All About Us
新华三官网