MPLS-FRR-GENERAL-STD-MIB

Object (OID)

Access

Syntax

Value range

Description

Implementation

mplsFrrGeneralProtectionMethod (1.3.6.1.2.1.202.1.1)

read-write

INTEGER

unknown(1)

oneToOneBackup(2)

facilityBackup(3)

FRR protection method supported by the device.

Supports only the read operation.

Supports only facilityBackup(3).

Object (OID)

Access

Syntax

Value range

Description

Implementation

mplsFrrGeneralIngressTunnelInstances (1.3.6.1.2.1.204.1.2)

read-only

Counter32

Counter32

(0..4294967295)

Number of tunnel instances for detour LSPs and bypass tunnels on the ingress LSR.

Supports displaying only the number of bypass tunnels.

Create

Edit/Modify

Delete

Read

Before the create operation, make sure the bypass tunnel identified by mplsFrrGeneralConstraintsTunnelIndex already exists.

The value for mplsFrrGeneralConstraintsTunnelInstance must be 0.

The mplsFrrGeneralConstraintsBandwidth object indicates the bandwidth reserved for a bypass tunnel, and it supports only CT0. If you do not specify this object, the default value 0 is used, indicating that the bypass tunnel provides bandwidth protection in best effort mode. For a bypass tunnel to provide guaranteed bandwidth protection, you must specify a specific bandwidth value for this object.

Not supported

Supported

The mplsFrrGeneralConstraintsBandwidth object displays no CT information or displays CT0 bandwidth. For other CTs, this object displays 0.

mplsFrrGeneralConstraintsIfIndexOrZero (1.3.6.1.2.1.202.1.3.1.1)

not-accessible

Integer32

Integer32

(0..2147483647)

Index of an interface to be protected by an FRR bypass tunnel.

As per the MIB.

mplsFrrGeneralConstraintsTunnelIndex (1.3.6.1.2.1.202.1.3.1.2)

not-accessible

MplsTunnelIndex

Gauge

(0..65535)

Index of the bypass tunnel.

As per the MIB.

mplsFrrGeneralConstraintsTunnelInstance (1.3.6.1.2.1.202.1.3.1.3)

not-accessible

MplsTunnelInstanceIndex

Gauge

(0..65535)

ID of a protected tunnel instance.

Supports only 0 for a set operation.

mplsFrrGeneralConstraintsProtectionType (1.3.6.1.2.1.202.1.3.1.4)

read-create

Integer32

linkProtection(1)

nodeProtection(2)

Protection method.

Supports only the read operation.

Supports only nodeProtection(2).

mplsFrrGeneralConstraintsSetupPrio (1.3.6.1.2.1.202.1.3.1.5)

read-create

Unsigned32

Unsigned32

(0..7)

Bypass tunnel setup priority.

Supports only the read operation.

mplsFrrGeneralConstraintsHoldingPrio (1.3.6.1.2.1.202.1.3.1.6)

read-create

Unsigned32

Unsigned32

(0..7)

Bypass tunnel holding priority.

Supports only the read operation.

mplsFrrGeneralConstraintsInclAnyAffinity (1.3.6.1.2.1.202.1.3.1.7)

read-create

Unsigned32

Unsigned32

(0..65535)

The include-any constraint for the bypass tunnel.

Supports only the read operation.

mplsFrrGeneralConstraintsInclAllAffinity (1.3.6.1.2.1.202.1.3.1.8)

read-create

Unsigned32

Unsigned32

(0..65535)

The include-all constraint for the bypass tunnel.

Supports only the read operation.

mplsFrrGeneralConstraintsExclAnyAffinity (1.3.6.1.2.1.202.1.3.1.9)

read-create

Unsigned32

Unsigned32(0..2147483647)

The exclude-any constraint for the bypass tunnel.

Supports only the read operation.

mplsFrrGeneralConstraintsHopLimit (1.3.6.1.2.1.202.1.3.1.10)

read-create

Unsigned32

Unsigned32

(0..255)

Maximum number of hops that the bypass tunnel can traverse.

Not supported.

The value is always 255.

mplsFrrGeneralConstraintsBandwidth (1.3.6.1.2.1.202.1.3.1.11)

read-create

Unsigned32

Unsigned32

(0..2147483647)

Bandwidth reserved for the bypass tunnel to provide bandwidth protection.

Supports only CT0 bandwidth.

mplsFrrGeneralConstraintsStorageType (1.3.6.1.2.1.202.1.3.1.12)

read-create

Integer32

other(1),
volatile(2),
nonVolatile(3),
permanent(4),
readOnly(5)}

Storage type.

Not supported.

The value is always nonvolatile(3).

mplsFrrGeneralConstraintsRowStatus (1.3.6.1.2.1.202.1.3.1.13)

read-create

Integer32

active(1),
notInService(2),
notReady(3),
createAndGo(4),
createAndWait(5),
destroy(6)

Row status.

Supports only active(1), createAndGo(4), and destroy(6).

Create

Edit/Modify

Delete

Read

Not supported

Not supported

Not supported

Supported

Object (OID)

Access

Syntax

Value range

Description

Implementation

mplsFrrGeneralTunnelARHopSessionAttributeFlags (1.3.6.1.2.1.202.1.4.1.1)

read-only

BITS

arHopSessionAttrFlagsUnsupported(0)

localProtectionDesired(1)

labelRecordingDesired(2)

sestyleDesired(3)

bandwidthProtectionDesired(4)

nodeProtectionDesired(5)

Values for the SESSION_ATTRIBUTE flags.

As per the MIB.

mplsFrrGeneralTunnelARHopRROSubObjectFlags (1.3.6.1.2.1.202.1.4.1.2)

read-only

BITS

arHopRROSubObjectFlagsUnsupported(0)

localProtectionAvailable(1)

localProtectionInUse(2)

bandwidthProtection(3)

nodeProtection(4)

Flags that are currently in use by the associated Record Route Object (RRO)

sub-object.

As per the MIB.