01-OAP单板命令
本章节下载: 01-OAP单板命令 (71.17 KB)
【命令】
oap connect slot slot-number
【视图】
用户视图
【缺省级别】
1:监控级
【参数】
slot slot-number:OAP单板所在的槽位号。
【描述】
oap connect命令用来从设备侧重定向到OAP单板。
按快捷键<Ctrl+k>可以从OAP单板的操作系统返回到设备命令行操作界面。
【举例】
# 从设备侧重定向到3号槽位的OAP单板。
<Sysname> oap connect slot 3
Press CTRL+K to quit.
Connected to OAP!
【命令】
oap reboot slot slot-number
【视图】
用户视图
【缺省级别】
2:系统级
【参数】
slot slot-number:OAP单板所在的槽位号。
【描述】
oap reboot命令用来配置重启OAP单板。
【举例】
# 复位3号槽位的OAP单板系统。
<Sysname> oap reboot slot 3
This command will recover the OAP from shutdown or other failed state.
Warning: This command may lose the data on the hard disk if the OAP is not being shut down!
Continue? [Y/N]:y
Reboot OAP by command.
不同款型规格的资料略有差异, 详细信息请向具体销售和400咨询。H3C保留在没有任何通知或提示的情况下对资料内容进行修改的权利!