l Verify that the system already operates in IPv4/IPv6 dual-stack mode before displaying the information about IPv6 routing. For dual-stack mode configuration, see the part covering dual-stack in the IPv6 Configuration module.

1.1 Routing Overview Commands

1.1.1 display ip routing-table

Syntax

display ip routing-table [ verbose | | { begin | exclude | include } regular-expression ]

View

Any view

Parameter

verbose: Displays detailed routing table information, including that for inactive routes. With this argument absent, the command displays only summary information about active routes.

|: Uses a regular expression to filter output information.

begin: Displays routing table entries starting from the one specified by the regular expression.

include: Displays routing table entries specified by the regular expression.

exclude: Displays routing table entries other than those specified by the regular expression.

regular-expression: Regular expression, a string of 1 to 256 characters.

Table 1-1 Special characters for regular expressions

Character	Meaning	Remarks
_	Underscore, functions similarly as a wildcard and matches one of the following: (^\|$\|[,(){}]) or a space, the beginning of a string, the end of a string.	If it is not the first character in a regular expression, it can appear as many times as the command line length permits. If it is the first character in a regular expression, it can be followed with up to four underscores. If it appears intermittently in a regular expression, only the first group takes effect.
(	Left parenthesis, represents a stack push operation in a program.	It is not recommended to use this character in a regular expression.
.	Full stop, a wildcard that matches any character, including a space.	—
*	Asterisk, indicates that the character(s) to its left can appear 0 or more times.	zo* matches z and zoo.
+	Plus, indicates that the character(s) to its left can appear one or more times.	zo+ matches zo and zoo, but not z.

Description

Use the display ip routing-table command to display brief information about active routes in the routing table.

Use the display ip routing-table verbose command to display detailed information about all routes in the routing table.

Example

# Display brief information about active routes in the routing table.

<Sysname> display ip routing-table

Routing Tables: Public

Destinations : 4 Routes : 4

Destination/Mask Proto Pre Cost NextHop Interface

127.0.0.0/8 Direct 0 0 127.0.0.1 InLoop0

127.0.0.1/32 Direct 0 0 127.0.0.1 InLoop0

192.168.0.0/16 Direct 0 0 192.168.0.52 Vlan1

192.168.0.52/32 Direct 0 0 127.0.0.1 InLoop0

Table 1-2 Description on the fields of the display ip routing-table command

Field	Description
Destinations	Number of destination addresses
Routes	Number of routes
Destination/Mask	Destination address/mask length
Proto	Protocol that presents the route
Pre	Priority of the route
Cost	Cost of the route
Nexthop	Address of the next hop on the route
Interface	Outbound interface for packets to be forwarded along the route

# Display detailed information about all routes in the routing table.

<Sysname> display ip routing-table verbose

Routing Table : Public

Destinations : 5 Routes : 5

Destination: 0.0.0.0/0

Protocol: Static Process ID: 0

Preference: 60 Cost: 0

NextHop: 192.168.3.1 Interface:

RelyNextHop: 0.0.0.0 Neighbour: 0.0.0.0

Tunnel ID: 0x0 Label: NULL

State: Inactive Adv WaitQ Age: 1d19h58m11s

Tag: 0

Destination: 127.0.0.0/8

Protocol: Direct Process ID: 0

Preference: 0 Cost: 0

NextHop: 127.0.0.1 Interface: InLoopBack0

RelyNextHop: 0.0.0.0 Neighbour: 0.0.0.0

Tunnel ID: 0x0 Label: NULL

State: Active NoAdv Age: 1d19h58m14s

Tag: 0

Destination: 127.0.0.1/32

Protocol: Direct Process ID: 0

Preference: 0 Cost: 0

NextHop: 127.0.0.1 Interface: InLoopBack0

RelyNextHop: 0.0.0.0 Neighbour: 0.0.0.0

Tunnel ID: 0x0 Label: NULL

State: Active NoAdv Age: 1d19h58m14s

Tag: 0

Destination: 192.168.0.0/24

Protocol: Direct Process ID: 0

Preference: 0 Cost: 0

NextHop: 192.168.0.52 Interface: Vlan-interface1

RelyNextHop: 0.0.0.0 Neighbour: 0.0.0.0

Tunnel ID: 0x0 Label: NULL

State: Active Adv Age: 1d19h58m10s

Tag: 0

Destination: 192.168.0.52/32

Protocol: Direct Process ID: 0

Preference: 0 Cost: 0

NextHop: 127.0.0.1 Interface: InLoopBack0

RelyNextHop: 0.0.0.0 Neighbour: 0.0.0.0

Tunnel ID: 0x0 Label: NULL

State: Active NoAdv Age: 1d19h58m13s

Tag: 0

Displayed first are statistics for the whole routing table, followed by detailed description of each route (in sequence).

Table 1-3 Description on the fields of the display ip routing-table verbose command

Field	Description
Destination	Destination address/mask length
Protocol	Protocol that presents the route
Process ID	Process ID
Preference	Priority of the route
Cost	Cost of the route
NextHop	Address of the next hop on the route
Interface	Outbound interface for packets to be forwarded along the route
RelyNextHop	The next hop address obtained through routing stack.
Neighbour	Neighboring address determined by Routing Protocol
Tunnel ID	Tunnel ID
Label	Label
State	Status of the route, which could be Active, Inactive, Adv, or NoAdv.
Age	Time that the route has been in the routing table, in the sequence of hour, minute, and second from left to right.
Tag	Route tag

1.1.2 display ip routing-table acl

Syntax

display ip routing-table acl acl-number [ verbose ]

View

Any view

Parameter

acl-number: Basic ACL number, in the range of 2000 to 2999.

verbose: Displays detailed routing table information, including that for inactive routes. With this argument absent, the command displays only brief information about active routes.

Description

Use the display ip routing-table acl command to display information about routes permitted by a specified basic ACL.

This command is intended for the follow-up display of routing policies.

& Note:

If the specified ACL does not exit or it has no rules configured, the entire routing table is displayed.

Example

# Define basic ACL 2000 and set the route filtering rules.

<Sysname > system-view

[Sysname] acl number 2000

[Sysname-acl-basic-2000] rule permit source 10.1.0.0 0.0.255.255

[Sysname-acl-basic-2000] quit

# Display brief information about active routes permitted by basic ACL 2000.

[Sysname] display ip routing-table acl 2000

Routes Matched by Access list : 2000

Summary Count : 3

Destination/Mask Proto Pre Cost NextHop Interface

10.1.1.0/24 Direct 0 0 10.1.1.2 Vlan1

10.1.1.2/32 Direct 0 0 127.0.0.1 InLoop0

10.1.2.1/32 Direct 0 0 127.0.0.1 InLoop0

For detailed description of the above output, see Table 1-2.

# Display detailed information about both active and inactive routes permitted by basic ACL 2000.

[Sysname] display ip routing-table acl 2000 verbose

Routes Matched by Access list : 2000

Summary Count : 3

Destination: 10.1.1.0/24

Protocol: Direct Process ID: 0

Preference: 0 Cost: 0

NextHop: 10.1.1.2 Interface: Vlan-interface1

RelyNextHop: 0.0.0.0 Neighbour: 0.0.0.0

Tunnel ID: 0x0 Label: NULL

State: Active Adv Age: 02h13m21s

Tag: 0

Destination: 10.1.1.2/32

Protocol: Direct Process ID: 0

Preference: 0 Cost: 0

NextHop: 127.0.0.1 Interface: InLoopBack0

RelyNextHop: 0.0.0.0 Neighbour: 0.0.0.0

Tunnel ID: 0x0 Label: NULL

State: Active NoAdv Age: 02h13m21s

Tag: 0

Destination: 10.1.2.1/32

Protocol: Direct Process ID: 0

Preference: 0 Cost: 0

NextHop: 127.0.0.1 Interface: InLoopBack0

RelyNextHop: 0.0.0.0 Neighbour: 0.0.0.0

Tunnel ID: 0x0 Label: NULL

State: Active Adv Age: 00h03m13s

Tag: 0

For detailed description of the above output, see Table 1-3.

1.1.3 display ip routing-table ip-address

Syntax

display ip routing-table ip-address [ mask-length | mask ] [ longer-match ] [ verbose ]

View

Any view

Parameter

ip-address: Destination IP address, in dotted decimal format.

mask-length: IP address mask length.

mask: IP address mask in dotted decimal format.

longer-match: Displays the route with the longer mask.

verbose: Displays detailed routing table information, including that for inactive routes. With this argument absent, the command displays only summary information about active routes.

Description

Use the display ip routing-table ip-address command to display information about routes to a specified destination address.

Executing the command with different parameters yields different output:

l display ip routing-table ip-address

The system ANDs the input destination IP address with the subnet mask in each route entry; and ANDs the destination IP address in each route entry with its corresponding subnet mask.

If the two operations yield the same result for an entry and this entry is active, it is displayed.

l display ip routing-table ip-address mask

The system ANDs the input destination IP address with the input subnet mask; and ANDs the destination IP address in each route entry with the input subnet mask.

If the two operations yield the same result for an entry and the entry is active with a subnet mask less than or equal to the input subnet mask, the entry is displayed.

Only route entries that exactly match the input destination address and mask are displayed.

l display ip routing-table ip-address longer-match

The system ANDs the input destination IP address with the subnet mask in each route entry; and ANDs the destination IP address in each route entry with its corresponding subnet mask.

If the two operations yield the same result for multiple entries that are active, the one with longest mask length is displayed.

l display ip routing-table ip-address mask longer-match

The system ANDs the input destination IP address with the input subnet mask; and ANDs the destination IP address in each route entry with the input subnet mask.

If the two operations yield the same result for multiple entries with a mask less than or equal to the input subnet mask, the one that is active with longest mask length is displayed.

Example

# Display brief information about active routes in the routing table..

<Sysname> display ip routing-table

Routing Tables: Public

Destinations : 13 Routes : 13

Destination/Mask Proto Pre Cost NextHop Interface

10.1.2.0/24 Static 60 0 0.0.0.0 NULL0

10.1.2.16/28 Static 60 0 0.0.0.0 NULL0

10.1.2.32/28 Static 60 0 0.0.0.0 NULL0

10.1.3.0/24 Static 60 0 0.0.0.0 NULL0

10.1.4.0/24 Static 60 0 0.0.0.0 NULL0

127.0.0.0/8 Direct 0 0 127.0.0.1 InLoop0

127.0.0.1/32 Direct 0 0 127.0.0.1 InLoop0

192.168.0.0/24 Direct 0 0 192.168.0.52 Vlan1

192.168.0.52/32 Direct 0 0 127.0.0.1 InLoop0

192.168.100.1/32 Direct 0 0 127.0.0.1 InLoop0

192.168.200.0/24 Static 60 0 192.168.0.36 Vlan1

192.168.220.0/24 Static 60 0 192.168.0.236 Vlan1

192.168.220.0/28 Static 60 0 192.168.0.25 Vlan1

# Display route entries for the destination IP address 192.168.0.220.

<Sysname> display ip routing-table 192.168.220.0

Routing Table : Public

Summary Count : 2

Destination/Mask Proto Pre Cost NextHop Interface

192.168.220.0/24 Static 60 0 192.168.0.236 Vlan1

192.168.220.0/28 Static 60 0 192.168.0.25 Vlan1

For detailed description about the output, see Table 1-2.

# Display route entries by specifying a destination IP address and the longer-match keyword.

<Sysname> display ip routing-table 192.168.220.0 longer-match

Routing Table : Public

Summary Count : 1

Destination/Mask Proto Pre Cost NextHop Interface

192.168.220.0/28 Static 60 0 192.168.0.25 Vlan1

# Display route entries by specifying a destination IP address and mask.

<Sysname> display ip routing-table 192.168.220.0 32

Routing Table : Public

Summary Count : 2

Destination/Mask Proto Pre Cost NextHop Interface

192.168.220.0/24 Static 60 0 192.168.0.236 Vlan1

192.168.220.0/28 Static 60 0 192.168.0.25 Vlan1

# Display route entries by specifying a destination IP address and mask and the longer-match keyword.

<Sysname> display ip routing-table 192.168.220.0 32 longer-match

Routing Table : Public

Summary Count : 1

Destination/Mask Proto Pre Cost NextHop Interface

192.168.220.0/28 Static 60 0 192.168.0.25 Vlan1

For detailed description of the above output, see Table 1-3.

1.1.4 display ip routing-table ip-address1 ip-address2

Syntax

display ip routing-table ip-address1 { mask-length1 | mask1 } ip-address2 { mask-length2 | mask2 } [ verbose ]

View

Any view

Parameter

ip-address1, ip-address2: Destination IP address, in dotted decimal notation. ip-address1/mask1 and ip-address2/mask2 combine to determine an address range. The system ANDs ip-address1 with mask1 for the starting address of the address range and ANDs ip-address2 with mask2 for the ending address of the address range.

mask1, mask2: IP address mask, address length in dotted decimal notation or expressed as an integer.

mask-length1 mask-length2: IP address mask length.

verbose: Displays detailed routing table information, including that for both active and inactive routes. With this argument absent, the command displays summary information about active routes only.

Description

Use the display ip routing-table ip-address1 ip-address2 command to display information about the routes to the specified range of destination addresses.

Example

# Display information about the routes to the destination addresses ranging from 10.1.4.0 to 200.0.0.0.

<Sysname> display ip routing-table 10.1.4.0 28 200.0.0.0 24

Routing Table : Public

Destination/Mask Proto Pre Cost NextHop Interface

10.1.4.0/24 Static 60 0 0.0.0.0 NULL0

127.0.0.0/8 Direct 0 0 127.0.0.1 InLoop0

127.0.0.1/32 Direct 0 0 127.0.0.1 InLoop0

192.168.0.0/24 Direct 0 0 192.168.0.52 Vlan1

192.168.0.52/32 Direct 0 0 127.0.0.1 InLoop0

192.168.100.1/32 Direct 0 0 127.0.0.1 InLoop0

192.168.200.0/24 Static 60 0 192.168.0.36 Vlan1

For detailed description of the above output, see Table 1-2.

1.1.5 display ip routing-table ip-prefix

Syntax

display ip routing-table ip-prefix ip-prefix-name [ verbose ]

View

Any view

Parameter

ip-prefix-name: IP Prefix list name, a string of 1 to 19 characters.

verbose: Displays detailed routing table information, including that for inactive routes. With this argument absent, the command displays only brief information about active routes.

Description

Use the display ip routing-table ip-prefix command to display information about routes permitted by a specified prefix list.

This command is intended for the follow-up display of routing policies. If the specified prefix list is not configured, detailed information about all routes (with the verbose keyword) or brief information about all active routes (without the verbose keyword) is displayed.

Example

# Configure a prefix list named abc, permitting routes with a prefix of 192.168.0.0 and a mask length between 16 and 32.

<Sysname> system-view

[Sysname] ip ip-prefix abc permit 192.168.0.0 16 less-equal 32

# Display brief information about active routes permitted by the prefix list abc.

<Sysname> display ip routing-table ip-prefix abc

Routes Matched by Prefix list : abc

Summary Count : 3

Destination/Mask Proto Pre Cost NextHop Interface

192.168.0.0/16 Direct 0 0 192.168.0.52 Vlan1

192.168.0.52/32 Direct 0 0 127.0.0.1 InLoop0

192.168.100.1/32 Direct 0 0 127.0.0.1 InLoop0

For detailed description of the above output, see Table 1-2.

# Display detailed information about both active and inactive routes permitted by IP prefix list abc.

<Sysname> display ip routing-table ip-prefix abc verbose

Routes Matched by Prefix list abc :

Summary Count : 3

Destination: 192.168.0.0/16

Protocol: Direct Process ID: 0

Preference: 0 Cost: 0

NextHop: 192.168.0.52 Interface: Vlan-interface1

RelyNextHop: 0.0.0.0 Neighbour: 0.0.0.0

Tunnel ID: 0x0 Label: NULL

State: Active Adv Age: 02h24m34s

Tag: 0

Destination: 192.168.0.52/32

Protocol: Direct Process ID: 0

Preference: 0 Cost: 0

NextHop: 127.0.0.1 Interface: InLoopBack0

RelyNextHop: 0.0.0.0 Neighbour: 0.0.0.0

Tunnel ID: 0x0 Label: NULL

State: Active NoAdv Age: 02h24m34s

Tag: 0

Destination: 192.168.100.1/32

Protocol: Direct Process ID: 0

Preference: 0 Cost: 0

NextHop: 127.0.0.1 Interface: InLoopBack0

RelyNextHop: 0.0.0.0 Neighbour: 0.0.0.0

Tunnel ID: 0x0 Label: NULL

State: Active Adv Age: 00h14m26s

Tag: 0

For detailed description of the above output, see Table 1-3.

1.1.6 display ip routing-table protocol

Syntax

display ip routing-table protocol protocol [ inactive | verbose ]

View

Any view

Parameter

protocol: Routing protocol. It can be BGP, DIRECT, ISIS, OSPF, RIP, or STATIC.

inactive: Displays information about only inactive routes. With this argument absent, the command displays information about both active and inactive routes.

verbose: Displays detailed routing table information. With this argument absent, the command displays brief routing table information.

Description

Use the display ip routing-table protocol command to display routing information of a specified routing protocol.

Example

# Display brief information about direct routes.

<Sysname> display ip routing-table protocol direct

Public Routing Table : Direct

Summary Count : 5

Direct Routing table Status : < Active>

Summary Count : 5

Destination/Mask Proto Pre Cost NextHop Interface

127.0.0.0/8 Direct 0 0 127.0.0.1 InLoop0

127.0.0.1/32 Direct 0 0 127.0.0.1 InLoop0

192.168.0.0/24 Direct 0 0 192.168.0.52 Vlan1

192.168.0.52/32 Direct 0 0 127.0.0.1 InLoop0

192.168.100.1/32 Direct 0 0 127.0.0.1 InLoop0

Direct Routing table Status : < Inactive>

Summary Count : 0

# Display summary information about static routes.

<Sysname> display ip routing-table protocol static

Public Routing Table : Static

Summary Count : 2

Static Routing table Status : < Active>

Summary Count : 1

Destination/Mask Proto Pre Cost NextHop Interface

192.168.200.0/24 Static 60 0 192.168.0.36 Vlan1

Static Routing table Status : < Inactive>

Summary Count : 1

Destination/Mask Proto Pre Cost NextHop Interface

192.168.120.0/24 Static 60 0 192.168.2.1

For detailed description of the above output, see Table 1-2.

1.1.7 display ip routing-table statistics

Syntax

display ip routing-table statistics

View

Any view

Parameter

None

Description

Use the display ip routing-table statistics command to display statistics about the public network routing table.

Example

# Display statistics about the routes in the routing table.

<Sysname> display ip routing-table statistics

Proto route active added deleted freed

DIRECT 4 4 4 0 0

STATIC 1 1 1 0 0

RIP 0 0 0 0 0

OSPF 0 0 0 0 0

IS-IS 0 0 0 0 0

BGP 0 0 0 0 0

Total 5 5 5 0 0

Table 1-4 Description on the fields of display ip routing-table statistics

Field	Description
Proto	Origin of the routes. Possible values include O_ASE for OSPF_ASE routes, O_NSSA for OSPF NSSA, and AGGRE for aggregated routes.
route	Number of routes from the origin
active	Number of active routes from the origin
added	Number of routes added into the routing table since the router starts up or the last routing table reset operation
deleted	Number of routes marked as deleted, which will be freed after a period.
freed	Number of routes that got freed, that is, got removed permanently
Total	Sums for the numerical items above

1.1.8 display ipv6 routing-table

Syntax

display ipv6 routing-table

View

Any view

Parameter

None

Description

Use the display ipv6 routing-table command to display brief routing table information, including destination IP address and prefix, protocol type, priority, metric, next hop and outbound interface.

The command displays only active routes, namely, the brief information about the current optimal routes.

Example

# Display brief routing table information

<Sysname> display ipv6 routing-table

Routing Table :

Destinations : 5 Routes : 5

Destination: ::1/128 Protocol : Direct

NextHop : ::1 Preference: 0

Interface : InLoop0 Cost : 0

Destination: 1::/64 Protocol : Static

NextHop : 10::2 Preference: 60

Interface : Vlan1 Cost : 0

Destination: 10::/64 Protocol : Direct

NextHop : 10::1 Preference: 0

Interface : Vlan1 Cost : 0

Destination: 10::1/128 Protocol : Direct

NextHop : ::1 Preference: 0

Interface : InLoop0 Cost : 0

Destination: FE80::/10 Protocol : Direct

NextHop : :: Preference: 0

Interface : NULL0 Cost : 0

Table 1-5 Description on the fields of the display ipv6 routing-table command

Field	Description
Destinations	Number of destination addresses
Routes	Number of routes
Destination	Destination IPv6 address
NextHop	Next hop
Preference	Routing preference
Interface	Outbound interface
Protocol	Routing protocol of the route
Cost	Routing cost

1.1.9 display ipv6 routing-table acl

Syntax

display ipv6 routing-table acl acl6-number [ verbose ]

View

Any view

Parameter

acl6-number: Basic IPv6 ACL number, in the range 2000 to 2999.

verbose: Displays both active and inactive verbose routing information permitted by the ACL. Without this keyword, only brief active routing information is displayed.

Description

Use the display ipv6 routing-table acl command to display routing information permitted by the IPv6 ACL.

Note that all the routing information will be displayed if the specified IPv6 ACL does not exist or no rule is defined in that ACL.

Example

# Display brief routing information permitted by ACL 2000.

<Sysname> display ipv6 routing-table acl 2000

Routes Matched by Access list 2000 :

Summary Count : 4

Destination: ::1/128 Protocol : Direct

NextHop : ::1 Preference: 0

Interface : InLoop0 Cost : 0

Destination: 3009::/64 Protocol : Direct

NextHop : 3009::1235 Preference: 0

Interface : Vlan1 Cost : 0

Destination: 3009::1235/128 Protocol : Direct

NextHop : ::1 Preference: 0

Interface : InLoop0 Cost : 0

Destination: FE80::/10 Protocol : Direct

NextHop : :: Preference: 0

Interface : NULL0 Cost : 0

Refer to Table 1-5 for description about the above output.

1.1.10 display ipv6 routing-table ipv6-address

Syntax

display ipv6 routing-table ipv6-address prefix-length [ longer-match ] [ verbose ]

View

Any view

Parameter

ipv6-address: Destination IPv6 address.

prefix-length: Prefix length, in the range 0 to 128.

longer-match: Displays routes matching the specified prefix.

verbose: Displays both active and inactive verbose routing information. Without this keyword, only brief active routing information is displayed.

Description

Use the display ipv6 routing-table ipv6-address command to display routing information about the specified destination IPv6 address.

Example

# Display brief information about the route matching the specified destination IPv6 address.

<Sysname> display ipv6 routing-table 10::1 64

Routing Table :

Summary Count : 1

Destination: 10::/64 Protocol : Direct

NextHop : 10::1 Preference: 0

Interface : Vlan1 Cost : 0

# Display brief information about routes with destinations falling into the specified destination.

<Sysname> display ipv6 routing-table 10::1 64 longer-match

Routing Table :

Summary Count : 2

Destination: 10::/64 Protocol : Direct

NextHop : 10::1 Preference: 0

Interface : Vlan1 Cost : 0

Destination: 10::1/128 Protocol : Direct

NextHop : ::1 Preference: 0

Interface : InLoop0 Cost : 0

Refer to Table 1-5 for description about the above output.

1.1.11 display ipv6 routing-table ipv6-address1 ipv6-address2

Syntax

display ipv6 routing-table ipv6-address1 prefix-length1 ipv6-address2 prefix-length2 [ verbose ]

View

Any view

Parameter

ipv6-address1/ipv6-address2: An IPv6 address range from IPv6 address1 to IPv6 address2.

prefix-length1/prefix-length2: Prefix length, in the range 0 to 128.

verbose: Displays both active and inactive verbose routing information. Without this keyword, only brief active routing information is displayed.

Description

Use the display ipv6 routing-table ipv6-address1 ipv6-address2 command to display routes with destinations falling into the specified IPv6 address range.

Example

# Display routes with destinations falling into the IPv6 address range.

<Sysname> display ipv6 routing-table 3:: 32 4:4:: 64

Routing Table :

Summary Count : 3

Destination: 3::/32 Protocol : Static

NextHop : :: Preference: 60

Interface : NULL0 Cost : 0

Destination: 4::/64 Protocol : Static

NextHop : :: Preference: 60

Interface : NULL0 Cost : 0

Destination: 4:4::/64 Protocol : Static

NextHop : :: Preference: 60

Interface : NULL0 Cost : 0

Refer to Table 1-5 for description about the above output.

1.1.12 display ipv6 routing-table ipv6-prefix

Syntax

display ipv6 routing-table ipv6-prefix ipv6-prefix-name [ verbose ]

View

Any view

Parameter

ipv6-prefix-name: Name of the IPv6 prefix list, in the range 1 to 19 characters.

verbose: Displays both active and inactive verbose routing information. Without this keyword, only brief active routing information is displayed.

Description

Use the display ipv6 routing-table ipv6-prefix command to display routes permitted by the IPv6 prefix list.

Example

# Display brief active routing information permitted by the IPv6 prefix list abc.

<Sysname> display ipv6 routing-table ipv6-prefix abc

Routes Matched by Prefix list abc :

Summary Count : 1

Destination: 100::/64 Protocol : Static

NextHop : :: Preference: 60

Interface : NULL0 Cost : 0

Refer to Table 1-5 for description about the above output.

1.1.13 display ipv6 routing-table protocol

Syntax

display ipv6 routing-table protocol protocol [ inactive | verbose ]

View

Any view

Parameter

protocol: Displays routes of a routing protocol, which can be bgp4+, isisv6, ospfv3, direct, ripng and static.

inactive: Displays only inactive routes. Without the keyword, all active and inactive routes are displayed.

verbose: Displays both active and inactive verbose routing information. Without this keyword, only brief active routing information is displayed.

Description

Use the display ipv6 routing-table protocol command to display routes of a specified routing protocol.

Example

# Display brief information about all direct routes.

<Sysname> display ipv6 routing-table protocol direct

Direct Routing Table :

Summary Count : 4

Direct Routing Table's Status : < Active >

Summary Count : 4

Destination: ::1/128 Protocol : Direct

NextHop : ::1 Preference: 0

Interface : InLoop0 Cost : 0

Destination: 3009::/64 Protocol : Direct

NextHop : 3009::1235 Preference: 0

Interface : Vlan1 Cost : 0

Destination: 3009::1235/128 Protocol : Direct

NextHop : ::1 Preference: 0

Interface : InLoop0 Cost : 0

Destination: FE80::/10 Protocol : Direct

NextHop : :: Preference: 0

Interface : NULL0 Cost : 0

Direct Routing Table's Status : < Inactive >

Summary Count : 0

Refer to Table 1-5 for description about the above output.

1.1.14 display ipv6 routing-table statistics

Syntax

display ipv6 routing-table statistics

View

Any view

Parameter

None

Description

Use the display ipv6 routing-table statistics command to display routing statistics, including total route number, added route number and deleted route number.

Example

# Display routing statistics.

<Sysname> display ipv6 routing-table statistics

Protocol route active added deleted freed

DIRECT 6 6 8 2 2

STATIC 3 1 3 0 0

RIPng 0 0 0 0 0

OSPFv3 0 0 0 0 0

IS-ISv6 0 0 0 0 0

BGP4+ 0 0 0 0 0

Total 9 7 11 2 2

Table 1-6 Description on the fields of the display ipv6 routing-table statistics command

Field	Description
Protocol	Routing protocol
route	Route number of the protocol
active	Active route number
added	Routes added after the last startup of the router
deleted	Deleted routes, which will be released after a specified time
freed	Released (totally removed from the routing table) route number
Total	Total route number

1.1.15 display ipv6 routing-table verbose

Syntax

display ipv6 routing-table verbose

View

Any view

Parameter

None

Description

Use the display ipv6 routing-table verbose command to display detailed information about all active and inactive routes, including the statistics of the entire routing table and information for each route.

Example

# Display detailed information about all active and inactive routes.

<Sysname> display ipv6 routing-table verbose

Routing Table :

Destinations : 1 Routes : 1

Destination : ::1 PrefixLength : 128

NextHop : ::1 Preference : 0

RelayNextHop : :: Tag : 0H

Neighbour : :: ProcessID : 0

Interface : InLoopBack0 Protocol : Direct

State : Active NoAdv Cost : 0

Tunnel ID : 0x0 Label : NULL

Age : 17073sec

Table 1-7 Description on the fields of the display ipv6 routing-table verbose command

Field	Description
Destination	Destination IPv6 address
PrefixLength	Prefix length of the address
Nexthop	Next hop
Preference	Routing preference
RelayNextHop	Relay next hop
Tag	Tag of the route
Neighbour	Neighbor address
ProcessID	Process ID
Interface	Outbound interface
Protocol	Routing protocol
State	State of the route, Active, Inactive, Adv (advertised), or NoAdv (not advertised)
Cost	Cost of the route
Tunnel ID	Tunnel ID
Label	Label
Age	Time that has elapsed since the route was generated

1.1.16 reset ip routing-table statistics protocol

Syntax

reset ip routing-table statistics protocol { all | protocol }

View

User view

Parameter

all: All protocols.

protocol: Routing protocol. It can be BGP, ISIS, OSPF, DIRECT, RIP, or STATIC.

Description

Use the reset ip routing-table statistics protocol command to clear routing statistics for the routing table.

Example

# You can use the display ip routing-table statistics command to display the routing statistics before configure the reset ip routing-table statistics protocol command.

<Sysname>display ip routing-table statistics

Proto route active added deleted freed

DIRECT 4 4 4 0 0

STATIC 0 0 0 0 0

RIP 0 0 0 0 0

OSPF 0 0 0 0 0

IS-IS 0 0 0 0 0

BGP 0 0 0 0 0

Total 4 4 4 0 0

# Clear all routing statistics in the routing table.

<Sysname> reset ip routing-table statistics protocol all

# After running the reset ip routing-table statistics protocol command, all the statistics for routing table have been cleared.

<Sysname> display ip routing-table statistics

Proto route active added deleted freed

DIRECT 4 4 0 0 0

STATIC 0 0 0 0 0

RIP 0 0 0 0 0

OSPF 0 0 0 0 0

IS-IS 0 0 0 0 0

BGP 0 0 0 0 0

Total 4 4 0 0 0

1.1.17 reset ipv6 routing-table statistics protocol

Syntax

reset ipv6 routing-table statistics protocol { all | protocol }

View

User view

Parameter

all: Clears all route statistics in the routing table.

protocol: Clears route statistics of a specified protocol, bgp4+,isisv6,ospfv3,direct, ripng, or static.

Description

Use the reset ipv6 routing-table statistics protocol command to clear the routing table statistics.

Example

# You can use the display ipv6 routing-table statistics command to display the routing statistics before configure the reset ipv6 routing-table statistics protocol command.

<Sysname> display ipv6 routing-table statistics

Protocol route active added deleted freed

DIRECT 6 6 8 2 2

STATIC 3 1 3 0 0

RIPng 0 0 0 0 0

OSPFv3 0 0 0 0 0

IS-ISv6 0 0 0 0 0

BGP4+ 0 0 0 0 0

Total 9 7 11 2 2

# Clear all routing statistics in the routing table.

<Sysname> reset ipv6 routing-table statistics protocol all

# After running the reset ipv6 routing-table statistics protocol command, all the statistics for routing table have been cleared.

<Sysname> display ipv6 routing-table statistics

Protocol route active added deleted freed

DIRECT 6 6 0 0 0

STATIC 3 1 0 0 0

RIPng 0 0 0 0 0

OSPFv3 0 0 0 0 0

IS-ISv6 0 0 0 0 0

BGP4+ 0 0 0 0 0

Total 9 7 0 0 0

H3C S3610[S5510] Series Ethernet Switches Command Manual-Release 0001-(V1.02)

1.1.4 display ip routing-table ip-address1 ip-address2

1.1.10 display ipv6 routing-table ipv6-address

1.1.16 reset ip routing-table statistics protocol

1.1.17 reset ipv6 routing-table statistics protocol

Intelligent Terminal Products

Product Support Services

Technical Service Solutions

Resource Center

Policy

Online Help

Become a Partner

Partner Policy & Program

Global Learning

Partner Sales Resources

Service Business

News & Events

Contact Us