Login
- Table of Contents
-
- H3C S7500 Series Command Manual(Release 3100 Series)-(V1.04)
- 00-1Cover
- 01-CLI Commands
- 02-Login Commands
- 03-Configuration File Management Commands
- 04-VLAN Commands
- 05-Extended VLAN Application Commands
- 06-IP Address-IP Performance-IPX Commands
- 07-GVRP Commands
- 08-QinQ Commands
- 09-Port Basic Configuration Commands
- 10-Link Aggregation Commands
- 11-Port Isolation Commands
- 12-Port Binding Commands
- 13-DLDP Commands
- 14-MAC Address Table Commands
- 15-MSTP Commands
- 16-Routing Protocol Commands
- 17-Multicast Commands
- 18-802.1x Commands
- 19-AAA-RADIUS-HWTACACS-EAD Commands
- 20-Traffic Accounting Commands
- 21-VRRP-HA Commands
- 22-ARP Commands
- 23-DHCP Commands
- 24-ACL Commands
- 25-QoS Commands
- 26-Mirroring Commands
- 27-Cluster Commands
- 28-PoE Commands
- 29-UDP-Helper Commands
- 30-SNMP-RMON Commands
- 31-NTP Commands
- 32-SSH Terminal Service Commands
- 33-File System Management Commands
- 34-FTP and TFTP Commands
- 35-Information Center Commands
- 36-DNS Commands
- 37-System Maintenance and Debugging Commands
- 38-HWPing Commands
- 39-RRPP Commands
- 40-NAT-Netstream-Policy Routing Commands
- 41-Telnet Protection Commands
- 42-Hardware-Dependent Software Configuration Commands
- 43-Appendix
- Related Documents
-
| Title | Size | Download |
|---|---|---|
| 43-Appendix | 89 KB |
Appendix A Command Index
The command index includes all the commands in the Command Manual, which are arranged alphabetically.
A B C D E F G H I J K L M N O P Q R S T U V W X Y Z
|
|
|
|
|
abr-summary |
Routing Protocol Commands |
3-1 |
|
access-limit |
AAA-RADIUS-HWTACACS-EAD Commands |
1-1 |
|
accounting enable |
Traffic Accounting Commands |
1-1 |
|
accounting optional |
AAA-RADIUS-HWTACACS-EAD Commands |
1-25 |
|
accounting-mode traffic |
Traffic Accounting Commands |
1-2 |
|
accounting-on enable |
AAA-RADIUS-HWTACACS-EAD Commands |
1-23 |
|
acl |
Login Commands |
2-1 |
|
acl |
ACL Commands |
1-1 |
|
acl mode |
ACL Commands |
1-2 |
|
acl order |
ACL Commands |
1-3 |
|
active region-configuration |
MSTP Commands |
1-1 |
|
add-member |
Cluster Commands |
1-14 |
|
address-check |
DHCP Commands |
2-1 |
|
address-check dhcp-relay |
DHCP Commands |
2-1 |
|
address-check no-matched |
DHCP Commands |
2-2 |
|
administrator-address |
Cluster Commands |
1-15 |
|
aggregate |
Routing Protocol Commands |
5-1 |
|
am user-bind |
Port Binding Commands |
1-2 |
|
am user-bind interface |
Port Binding Commands |
1-1 |
|
apply as-path |
Routing Protocol Commands |
6-1 |
|
apply community |
Routing Protocol Commands |
6-2 |
|
apply cost |
Routing Protocol Commands |
6-3 |
|
apply cost-type |
Routing Protocol Commands |
6-3 |
|
apply ip next-hop |
Routing Protocol Commands |
6-4 |
|
apply isis |
Routing Protocol Commands |
6-5 |
|
apply local-preference |
Routing Protocol Commands |
6-6 |
|
apply origin |
Routing Protocol Commands |
6-6 |
|
apply tag |
Routing Protocol Commands |
6-7 |
|
area |
Routing Protocol Commands |
3-2 |
|
area-authentication-mode |
Routing Protocol Commands |
4-1 |
|
arp check enable |
ARP Commands |
1-1 |
|
arp gratuitous-updating enable |
ARP Commands |
1-1 |
|
arp mac-arp-map limit |
ARP Commands |
1-2 |
|
arp max-dynamic-entry |
ARP Commands |
1-4 |
|
arp max-entry |
ARP Commands |
1-3 |
|
arp proxy enable |
ARP Commands |
1-4 |
|
arp proxy source-vlan enable |
ARP Commands |
1-5 |
|
arp source-suppression limit |
ARP Commands |
1-6 |
|
arp static |
ARP Commands |
1-7 |
|
arp timer aging |
ARP Commands |
1-8 |
|
arp timer gratuitous-updating |
ARP Commands |
1-8 |
|
asbr-summary |
Routing Protocol Commands |
3-3 |
|
ascii |
FTP and TFTP Commands |
1-4 |
|
attack-protection |
Telnet Protection Commands |
1-1 |
|
attack-protection disable-defaultroute |
Telnet Protection Commands |
1-2 |
|
attack-protection icmp |
Telnet Protection Commands |
1-2 |
|
attack-protection snmp |
Telnet Protection Commands |
1-3 |
|
attack-protection telnet |
Telnet Protection Commands |
1-4 |
|
attribute |
AAA-RADIUS-HWTACACS-EAD Commands |
1-2 |
|
authentication-mode |
Login Commands |
1-1 |
|
authentication-mode |
Routing Protocol Commands |
3-4 |
|
auto-build |
Cluster Commands |
1-16 |
|
auto-execute command |
Login Commands |
1-2 |
|
|
|
|
|
balance |
Routing Protocol Commands |
5-3 |
|
bgp |
Routing Protocol Commands |
5-3 |
|
binary |
FTP and TFTP Commands |
1-5 |
|
boot boot-loader |
System Maintenance and Debugging Commands |
3-1 |
|
boot boot-loader primary |
Hardware-Dependent Software Configuration Commands |
1-2 |
|
boot bootrom |
System Maintenance and Debugging Commands |
3-2 |
|
boot bootrom default |
System Maintenance and Debugging Commands |
3-2 |
|
boot bootrom default |
Hardware-Dependent Software Configuration Commands |
1-1 |
|
boot bootrom file-url |
Hardware-Dependent Software Configuration Commands |
1-1 |
|
bootrom-update security-check enable |
System Maintenance and Debugging Commands |
3-3 |
|
bridgemactocpu |
MAC Address Table Commands |
1-1 |
|
broadcast-suppression |
VLAN Commands |
1-1 |
|
broadcast-suppression |
Port Basic Configuration Commands |
1-1 |
|
bsr-policy |
Multicast Commands |
6-1 |
|
build |
Cluster Commands |
1-17 |
|
bye |
SSH Terminal Service Commands |
1-26 |
|
bye |
FTP and TFTP Commands |
1-5 |
|
|
|
|
|
c-bsr |
Multicast Commands |
6-2 |
|
cd |
SSH Terminal Service Commands |
1-27 |
|
cd |
File System Management Commands |
1-1 |
|
cd |
FTP and TFTP Commands |
1-6 |
|
cdup |
SSH Terminal Service Commands |
1-28 |
|
cdup |
FTP and TFTP Commands |
1-7 |
|
check region-configuration |
MSTP Commands |
1-2 |
|
checkzero |
Routing Protocol Commands |
2-1 |
|
clock datetime |
System Maintenance and Debugging Commands |
1-1 |
|
clock summer-time |
System Maintenance and Debugging Commands |
1-1 |
|
clock timezone |
System Maintenance and Debugging Commands |
1-3 |
|
close |
FTP and TFTP Commands |
1-8 |
|
cluster |
Cluster Commands |
1-18 |
|
cluster enable |
Cluster Commands |
1-19 |
|
cluster switch-to |
Cluster Commands |
1-20 |
|
command-privilege level |
CLI Commands |
1-1 |
|
compare-different-as-med |
Routing Protocol Commands |
5-4 |
|
confederation id |
Routing Protocol Commands |
5-5 |
|
confederation nonstandard |
Routing Protocol Commands |
5-6 |
|
confederation peer-as |
Routing Protocol Commands |
5-7 |
|
control-vlan |
RRPP Commands |
1-1 |
|
copy |
File System Management Commands |
1-2 |
|
copy configuration |
Port Basic Configuration Commands |
1-2 |
|
cost-style |
Routing Protocol Commands |
4-2 |
|
count |
HWPing Commands |
1-1 |
|
c-rp |
Multicast Commands |
6-3 |
|
crp-policy |
Multicast Commands |
6-4 |
|
cut connection |
AAA-RADIUS-HWTACACS-EAD Commands |
1-3 |
|
|
|
|
|
dampening |
Routing Protocol Commands |
5-7 |
|
databits |
Login Commands |
1-3 |
|
data-flow-format |
AAA-RADIUS-HWTACACS-EAD Commands |
1-26 |
|
data-flow-format |
AAA-RADIUS-HWTACACS-EAD Commands |
1-53 |
|
debugging |
FTP and TFTP Commands |
1-9 |
|
debugging |
System Maintenance and Debugging Commands |
1-10 |
|
debugging traffic-accounting event |
Traffic Accounting Commands |
1-2 |
|
default cost |
Routing Protocol Commands |
2-2 |
|
default cost |
Routing Protocol Commands |
3-5 |
|
default interval |
Routing Protocol Commands |
3-5 |
|
default limit |
Routing Protocol Commands |
3-6 |
|
default local-preference |
Routing Protocol Commands |
5-9 |
|
default med |
Routing Protocol Commands |
5-9 |
|
default tag |
Routing Protocol Commands |
3-7 |
|
default type |
Routing Protocol Commands |
3-8 |
|
default-cost |
Routing Protocol Commands |
3-8 |
|
default-route-advertise |
Routing Protocol Commands |
3-9 |
|
default-route-advertise |
Routing Protocol Commands |
4-3 |
|
delete |
SSH Terminal Service Commands |
1-28 |
|
delete |
File System Management Commands |
1-3 |
|
delete |
FTP and TFTP Commands |
1-9 |
|
delete static-routes all |
Routing Protocol Commands |
1-14 |
|
delete-member |
Cluster Commands |
1-21 |
|
description |
VLAN Commands |
1-2 |
|
description |
Port Basic Configuration Commands |
1-3 |
|
description |
Port Isolation Commands |
1-1 |
|
destination-ip |
HWPing Commands |
1-1 |
|
dhcp enable |
DHCP Commands |
1-1 |
|
dhcp relay information enable |
DHCP Commands |
2-3 |
|
dhcp relay information strategy |
DHCP Commands |
2-4 |
|
dhcp select global |
DHCP Commands |
1-1 |
|
dhcp select interface |
DHCP Commands |
1-2 |
|
dhcp server detect |
DHCP Commands |
1-3 |
|
dhcp server dns-list |
DHCP Commands |
1-4 |
|
dhcp server domain-name |
DHCP Commands |
1-5 |
|
dhcp server expired |
DHCP Commands |
1-6 |
|
dhcp server forbidden-ip |
DHCP Commands |
1-7 |
|
dhcp server ip-pool |
DHCP Commands |
1-8 |
|
dhcp server nbns-list |
DHCP Commands |
1-9 |
|
dhcp server netbios-type |
DHCP Commands |
1-10 |
|
dhcp server option |
DHCP Commands |
1-11 |
|
dhcp server ping |
DHCP Commands |
1-12 |
|
dhcp server static-bind |
DHCP Commands |
1-13 |
|
dhcp-security static |
DHCP Commands |
2-4 |
|
dhcp-server |
Extended VLAN Application Commands |
3-1 |
|
dhcp-server |
DHCP Commands |
2-5 |
|
dhcp-server ip |
DHCP Commands |
2-6 |
|
dhcp-snooping |
DHCP Commands |
3-1 |
|
dhcp-snooping information enable |
DHCP Commands |
3-2 |
|
dhcp-snooping trust |
DHCP Commands |
3-1 |
|
dir |
SSH Terminal Service Commands |
1-29 |
|
dir |
File System Management Commands |
1-4 |
|
dir |
FTP and TFTP Commands |
1-10 |
|
disconnect |
FTP and TFTP Commands |
1-12 |
|
display acl config |
ACL Commands |
1-4 |
|
display acl config statistics |
ACL Commands |
1-5 |
|
display acl mode |
ACL Commands |
1-5 |
|
display acl order |
ACL Commands |
1-6 |
|
display acl remaining entry |
ACL Commands |
1-6 |
|
display acl running-packet-filter |
ACL Commands |
1-8 |
|
display am user-bind |
Port Binding Commands |
1-3 |
|
display arp |
ARP Commands |
1-9 |
|
display arp | |
ARP Commands |
1-10 |
|
display arp attack-list |
ARP Commands |
1-11 |
|
display arp entry-limit |
ARP Commands |
1-12 |
|
display arp interface |
ARP Commands |
1-13 |
|
display arp proxy |
ARP Commands |
1-13 |
|
display arp slot |
ARP Commands |
1-14 |
|
display arp source-suppression |
ARP Commands |
1-14 |
|
display arp timer aging |
ARP Commands |
1-15 |
|
display arp vlan |
ARP Commands |
1-15 |
|
display bgp group |
Routing Protocol Commands |
5-10 |
|
display bgp network |
Routing Protocol Commands |
5-11 |
|
display bgp paths |
Routing Protocol Commands |
5-12 |
|
display bgp peer |
Routing Protocol Commands |
5-13 |
|
display bgp routing-table |
Routing Protocol Commands |
5-14 |
|
display bgp routing-table as-path-acl |
Routing Protocol Commands |
5-16 |
|
display bgp routing-table cidr |
Routing Protocol Commands |
5-17 |
|
display bgp routing-table community |
Routing Protocol Commands |
5-18 |
|
display bgp routing-table community-list |
Routing Protocol Commands |
5-19 |
|
display bgp routing-table dampened |
Routing Protocol Commands |
5-20 |
|
display bgp routing-table different-origin-as |
Routing Protocol Commands |
5-21 |
|
display bgp routing-table flap-info |
Routing Protocol Commands |
5-22 |
|
display bgp routing-table peer |
Routing Protocol Commands |
5-24 |
|
display bgp routing-table regular-expression |
Routing Protocol Commands |
5-25 |
|
display bgp routing-table statistic |
Routing Protocol Commands |
5-25 |
|
display boot-loader |
System Maintenance and Debugging Commands |
3-3 |
|
display brief interface |
Port Basic Configuration Commands |
1-4 |
|
display channel |
Information Center Commands |
1-1 |
|
display clock |
System Maintenance and Debugging Commands |
1-7 |
|
display cluster |
Cluster Commands |
1-21 |
|
display cluster candidates |
Cluster Commands |
1-23 |
|
display cluster members |
Cluster Commands |
1-24 |
|
display connection |
AAA-RADIUS-HWTACACS-EAD Commands |
1-4 |
|
display cpu |
System Maintenance and Debugging Commands |
3-4 |
|
display current-configuration |
Configuration File Management Commands |
1-1 |
|
display debugging |
System Maintenance and Debugging Commands |
1-7 |
|
display device |
System Maintenance and Debugging Commands |
3-5 |
|
display dhcp server conflict |
DHCP Commands |
1-14 |
|
display dhcp server expired |
DHCP Commands |
1-15 |
|
display dhcp server free-ip |
DHCP Commands |
1-16 |
|
display dhcp server ip-in-use |
DHCP Commands |
1-17 |
|
display dhcp server statistics |
DHCP Commands |
1-18 |
|
display dhcp server tree |
DHCP Commands |
1-20 |
|
display dhcp-security |
DHCP Commands |
2-7 |
|
display dhcp-server |
DHCP Commands |
2-7 |
|
display dhcp-server interface |
DHCP Commands |
2-9 |
|
display dhcp-snooping |
DHCP Commands |
3-3 |
|
display dhcp-snooping count |
DHCP Commands |
3-4 |
|
display dhcp-snooping trust |
DHCP Commands |
3-4 |
|
display dhcp-snooping vlan |
DHCP Commands |
3-5 |
|
display diagnostic-information |
System Maintenance and Debugging Commands |
1-11 |
|
display dldp |
DLDP Commands |
1-1 |
|
display dns domain |
DNS Commands |
1-1 |
|
display dns dynamic-host |
DNS Commands |
1-1 |
|
display dns server |
DNS Commands |
1-2 |
|
display domain |
AAA-RADIUS-HWTACACS-EAD Commands |
1-5 |
|
display dot1x |
802.1x Commands |
1-1 |
|
display environment |
System Maintenance and Debugging Commands |
3-6 |
|
display fan |
System Maintenance and Debugging Commands |
3-6 |
|
display fib |
IP Address-IP Performance-IPX Commands |
2-1 |
|
display ftp-server |
FTP and TFTP Commands |
1-1 |
|
display ftp-user |
FTP and TFTP Commands |
1-2 |
|
display garp statistics |
GVRP Commands |
1-1 |
|
display garp timer |
GVRP Commands |
1-2 |
|
display gmrp statistics |
Multicast Commands |
1-1 |
|
display gmrp status |
Multicast Commands |
1-2 |
|
display gvrp statistics |
GVRP Commands |
1-6 |
|
display gvrp status |
GVRP Commands |
1-7 |
|
display habp |
802.1x Commands |
2-1 |
|
display habp table |
802.1x Commands |
2-2 |
|
display habp traffic |
802.1x Commands |
2-2 |
|
display history-command |
CLI Commands |
1-2 |
|
display hwping |
HWPing Commands |
1-2 |
|
display hwtacacs |
AAA-RADIUS-HWTACACS-EAD Commands |
1-54 |
|
display icmp statistics |
IP Address-IP Performance-IPX Commands |
2-3 |
|
display igmp group |
Multicast Commands |
5-1 |
|
display igmp interface |
Multicast Commands |
5-2 |
|
display igmp-snooping configuration |
Multicast Commands |
2-1 |
|
display igmp-snooping group |
Multicast Commands |
2-2 |
|
display igmp-snooping statistics |
Multicast Commands |
2-3 |
|
display info-center |
Information Center Commands |
1-1 |
|
display interface |
Port Basic Configuration Commands |
1-5 |
|
display interface Vlan-interface |
VLAN Commands |
1-3 |
|
display ip host |
DNS Commands |
1-3 |
|
display ip interface |
IP Address-IP Performance-IPX Commands |
1-1 |
|
display ip ip-prefix |
Routing Protocol Commands |
6-8 |
|
display ip netstream cache |
NAT-Netstream-Policy Routing Commands |
2-1 |
|
display ip netstream export |
NAT-Netstream-Policy Routing Commands |
2-2 |
|
display ip routing-table |
Routing Protocol Commands |
1-1 |
|
display ip routing-table acl |
Routing Protocol Commands |
1-2 |
|
display ip routing-table ip-address |
Routing Protocol Commands |
1-5 |
|
display ip routing-table ip-address1 ip-address2 |
Routing Protocol Commands |
1-7 |
|
display ip routing-table ip-prefix |
Routing Protocol Commands |
1-8 |
|
display ip routing-table protocol |
Routing Protocol Commands |
1-9 |
|
display ip routing-table radix |
Routing Protocol Commands |
1-11 |
|
display ip routing-table statistics |
Routing Protocol Commands |
1-12 |
|
display ip routing-table verbose |
Routing Protocol Commands |
1-13 |
|
display ip socket |
IP Address-IP Performance-IPX Commands |
2-4 |
|
display ip statistics |
IP Address-IP Performance-IPX Commands |
2-6 |
|
display ip userlog export |
NAT-Netstream-Policy Routing Commands |
1-21 |
|
display ipx interface |
IP Address-IP Performance-IPX Commands |
3-1 |
|
display ipx routing-table |
IP Address-IP Performance-IPX Commands |
3-3 |
|
display ipx service-table |
IP Address-IP Performance-IPX Commands |
3-5 |
|
display ipx statistics |
IP Address-IP Performance-IPX Commands |
3-7 |
|
display isis brief |
Routing Protocol Commands |
4-4 |
|
display isis interface |
Routing Protocol Commands |
4-5 |
|
display isis lsdb |
Routing Protocol Commands |
4-6 |
|
display isis mesh-group |
Routing Protocol Commands |
4-6 |
|
display isis peer |
Routing Protocol Commands |
4-7 |
|
display isis route |
Routing Protocol Commands |
4-8 |
|
display isis spf-log |
Routing Protocol Commands |
4-9 |
|
display isolate port |
Port Isolation Commands |
1-1 |
|
display isolate-user-vlan |
Extended VLAN Application Commands |
2-1 |
|
display lacp system-id |
Link Aggregation Commands |
1-1 |
|
display link-aggregation interface |
Link Aggregation Commands |
1-1 |
|
display link-aggregation summary |
Link Aggregation Commands |
1-3 |
|
display link-aggregation verbose |
Link Aggregation Commands |
1-4 |
|
display local-server statistics |
AAA-RADIUS-HWTACACS-EAD Commands |
1-27 |
|
display local-user |
AAA-RADIUS-HWTACACS-EAD Commands |
1-7 |
|
display logbuffer |
Information Center Commands |
1-3 |
|
display logbuffer summary |
Information Center Commands |
1-5 |
|
display loopback-detection |
Port Basic Configuration Commands |
1-8 |
|
display mac-address |
MAC Address Table Commands |
1-2 |
|
display mac-address aging-time |
MAC Address Table Commands |
1-2 |
|
display mac-address multicast |
Multicast Commands |
4-1 |
|
display memory |
Routing Protocol Commands |
7-1 |
|
display memory |
System Maintenance and Debugging Commands |
3-7 |
|
display memory limit |
Routing Protocol Commands |
7-2 |
|
display mirroring-group |
Mirroring Commands |
1-1 |
|
display mpm forwarding-table |
Multicast Commands |
3-1 |
|
display mpm group |
Multicast Commands |
3-2 |
|
display multicast forwarding-table |
Multicast Commands |
3-4 |
|
display multicast routing-table |
Multicast Commands |
3-5 |
|
display multicast-source-deny |
Multicast Commands |
3-7 |
|
display multicast-vlan |
Multicast Commands |
2-4 |
|
display nat address-group |
NAT-Netstream-Policy Routing Commands |
1-1 |
|
display nat aging-time |
NAT-Netstream-Policy Routing Commands |
1-1 |
|
display nat all |
NAT-Netstream-Policy Routing Commands |
1-2 |
|
display nat blacklist |
NAT-Netstream-Policy Routing Commands |
1-3 |
|
display nat outbound |
NAT-Netstream-Policy Routing Commands |
1-4 |
|
display nat server |
NAT-Netstream-Policy Routing Commands |
1-5 |
|
display nat statistics |
NAT-Netstream-Policy Routing Commands |
1-6 |
|
display ndp |
Cluster Commands |
1-1 |
|
display ntdp |
Cluster Commands |
1-6 |
|
display ntdp device-list |
Cluster Commands |
1-7 |
|
display ntp-service sessions |
NTP Commands |
1-1 |
|
display ntp-service status |
NTP Commands |
1-2 |
|
display ntp-service trace |
NTP Commands |
1-3 |
|
display ospf abr-asbr |
Routing Protocol Commands |
3-10 |
|
display ospf asbr-summary |
Routing Protocol Commands |
3-11 |
|
display ospf brief |
Routing Protocol Commands |
3-13 |
|
display ospf cumulative |
Routing Protocol Commands |
3-14 |
|
display ospf error |
Routing Protocol Commands |
3-16 |
|
display ospf interface |
Routing Protocol Commands |
3-19 |
|
display ospf lsdb |
Routing Protocol Commands |
3-20 |
|
display ospf nexthop |
Routing Protocol Commands |
3-23 |
|
display ospf peer |
Routing Protocol Commands |
3-24 |
|
display ospf request-queue |
Routing Protocol Commands |
3-26 |
|
display ospf retrans-queue |
Routing Protocol Commands |
3-27 |
|
display ospf routing |
Routing Protocol Commands |
3-28 |
|
display ospf vlink |
Routing Protocol Commands |
3-29 |
|
display pim bsr-info |
Multicast Commands |
6-5 |
|
display pim interface |
Multicast Commands |
6-6 |
|
display pim neighbor |
Multicast Commands |
6-7 |
|
display pim routing-table |
Multicast Commands |
6-8 |
|
display pim rp-info |
Multicast Commands |
6-10 |
|
display poe interface |
PoE Commands |
1-1 |
|
display poe interface power |
PoE Commands |
1-3 |
|
display poe powersupply |
PoE Commands |
1-5 |
|
display poe pse |
PoE Commands |
1-6 |
|
display poe-power ac-input state |
PoE Commands |
2-1 |
|
display poe-power alarm |
PoE Commands |
2-2 |
|
display poe-power dc-output state |
PoE Commands |
2-3 |
|
display poe-power dc-output value |
PoE Commands |
2-4 |
|
display poe-power switch state |
PoE Commands |
2-5 |
|
display port |
Port Basic Configuration Commands |
1-9 |
|
display port vlan-vpn |
QinQ Commands |
1-1 |
|
display power |
System Maintenance and Debugging Commands |
3-8 |
|
display priority-trust |
QoS Commands |
1-1 |
|
display protocol-vlan interface |
VLAN Commands |
1-14 |
|
display protocol-vlan slot |
VLAN Commands |
1-15 |
|
display protocol-vlan vlan |
VLAN Commands |
1-16 |
|
display qos cos-local-precedence-map |
QoS Commands |
1-2 |
|
display qos-interface all |
QoS Commands |
1-2 |
|
display qos-interface line-rate |
QoS Commands |
1-3 |
|
display qos-interface mirrored-to |
Mirroring Commands |
1-2 |
|
display qos-interface queue-scheduler |
QoS Commands |
1-4 |
|
display qos-interface traffic-bandwidth |
QoS Commands |
1-5 |
|
display qos-interface traffic-limit |
QoS Commands |
1-6 |
|
display qos-interface traffic-priority |
QoS Commands |
1-7 |
|
display qos-interface traffic-red |
QoS Commands |
1-7 |
|
display qos-interface traffic-redirect |
QoS Commands |
1-8 |
|
display qos-interface traffic-remark-vlanid |
QoS Commands |
1-8 |
|
display qos-interface traffic-statistic |
QoS Commands |
1-9 |
|
display qos-vlan traffic-redirect |
NAT-Netstream-Policy Routing Commands |
3-1 |
|
display radius |
AAA-RADIUS-HWTACACS-EAD Commands |
1-27 |
|
display radius statistics |
AAA-RADIUS-HWTACACS-EAD Commands |
1-29 |
|
display rip |
Routing Protocol Commands |
2-2 |
|
display rip routing |
Routing Protocol Commands |
2-3 |
|
display rmon alarm |
SNMP-RMON Commands |
2-1 |
|
display rmon event |
SNMP-RMON Commands |
2-2 |
|
display rmon eventlog |
SNMP-RMON Commands |
2-3 |
|
display rmon history |
SNMP-RMON Commands |
2-4 |
|
display rmon prialarm |
SNMP-RMON Commands |
2-6 |
|
display rmon statistics |
SNMP-RMON Commands |
2-7 |
|
display route-policy |
Routing Protocol Commands |
6-9 |
|
display rrpp brief |
RRPP Commands |
1-2 |
|
display rrpp statistics |
RRPP Commands |
1-3 |
|
display rrpp verbose |
RRPP Commands |
1-4 |
|
display rsa local-key-pair public |
SSH Terminal Service Commands |
1-1 |
|
display rsa peer-public-key |
SSH Terminal Service Commands |
1-2 |
|
display saved-configuration |
Configuration File Management Commands |
1-6 |
|
display schedule reboot |
System Maintenance and Debugging Commands |
3-9 |
|
display snmp-agent |
SNMP-RMON Commands |
1-1 |
|
display snmp-agent community |
SNMP-RMON Commands |
1-1 |
|
display snmp-agent group |
SNMP-RMON Commands |
1-2 |
|
display snmp-agent mib-view |
SNMP-RMON Commands |
1-3 |
|
display snmp-agent statistics |
SNMP-RMON Commands |
1-5 |
|
display snmp-agent sys-info |
SNMP-RMON Commands |
1-6 |
|
display snmp-agent usm-user |
SNMP-RMON Commands |
1-7 |
|
display ssh server |
SSH Terminal Service Commands |
1-3 |
|
display ssh server-info |
SSH Terminal Service Commands |
1-18 |
|
display ssh user-information |
SSH Terminal Service Commands |
1-5 |
|
display startup |
Configuration File Management Commands |
1-9 |
|
display stop-accounting-buffer |
AAA-RADIUS-HWTACACS-EAD Commands |
1-30 |
|
display stop-accounting-buffer |
AAA-RADIUS-HWTACACS-EAD Commands |
1-55 |
|
display stp |
MSTP Commands |
1-3 |
|
display stp region-configuration |
MSTP Commands |
1-5 |
|
display supervision-module information |
PoE Commands |
2-5 |
|
display supervlan |
Extended VLAN Application Commands |
3-1 |
|
display switchover state |
VRRP-HA Commands |
2-1 |
|
display tcp statistics |
IP Address-IP Performance-IPX Commands |
2-7 |
|
display tcp status |
IP Address-IP Performance-IPX Commands |
2-10 |
|
display this |
Configuration File Management Commands |
1-8 |
|
display time-range |
ACL Commands |
1-8 |
|
display traffic-accounting accounting-slot |
Traffic Accounting Commands |
1-3 |
|
display traffic-accounting statistics |
Traffic Accounting Commands |
1-4 |
|
display traffic-accounting traffic-group |
Traffic Accounting Commands |
1-4 |
|
display transceiver-information interface |
Port Basic Configuration Commands |
1-9 |
|
display trapbuffer |
Information Center Commands |
1-5 |
|
display udp statistics |
IP Address-IP Performance-IPX Commands |
2-11 |
|
display udp-helper server |
UDP-Helper Commands |
1-1 |
|
display uplink monitor |
System Maintenance and Debugging Commands |
3-9 |
|
display user-interface |
Login Commands |
1-3 |
|
display users |
Login Commands |
1-5 |
|
display users |
System Maintenance and Debugging Commands |
1-8 |
|
display version |
System Maintenance and Debugging Commands |
1-9 |
|
display vlan |
VLAN Commands |
1-4 |
|
display vlan |
Extended VLAN Application Commands |
1-3 |
|
display voice vlan oui |
Extended VLAN Application Commands |
1-1 |
|
display voice vlan status |
Extended VLAN Application Commands |
1-1 |
|
display vrrp |
VRRP-HA Commands |
1-1 |
|
dldp |
DLDP Commands |
1-2 |
|
dldp authentication-mode |
DLDP Commands |
1-3 |
|
dldp delaydown-timer |
DLDP Commands |
1-7 |
|
dldp interval |
DLDP Commands |
1-4 |
|
dldp reset |
DLDP Commands |
1-5 |
|
dldp unidirectional-shutdown |
DLDP Commands |
1-6 |
|
dldp work-mode |
DLDP Commands |
1-7 |
|
dns domain |
DNS Commands |
1-4 |
|
dns resolve |
DNS Commands |
1-5 |
|
dns server |
DNS Commands |
1-6 |
|
dns-list |
DHCP Commands |
1-22 |
|
domain |
AAA-RADIUS-HWTACACS-EAD Commands |
1-9 |
|
domain-authentication-mode |
Routing Protocol Commands |
4-10 |
|
domain-name |
DHCP Commands |
1-23 |
|
dot1x |
802.1x Commands |
1-4 |
|
dot1x authentication-method |
802.1x Commands |
1-6 |
|
dot1x dhcp-launch |
802.1x Commands |
1-7 |
|
dot1x guest-vlan |
802.1x Commands |
1-7 |
|
dot1x max-user |
802.1x Commands |
1-9 |
|
dot1x port-control |
802.1x Commands |
1-10 |
|
dot1x port-method |
802.1x Commands |
1-11 |
|
dot1x quiet-period |
802.1x Commands |
1-12 |
|
dot1x re-authenticate |
802.1x Commands |
1-13 |
|
dot1x retry |
802.1x Commands |
1-14 |
|
dot1x retry-version-max |
802.1x Commands |
1-14 |
|
dot1x supp-proxy-check |
802.1x Commands |
1-15 |
|
dot1x timer |
802.1x Commands |
1-17 |
|
dot1x version-check |
802.1x Commands |
1-19 |
|
duplex |
Port Basic Configuration Commands |
1-10 |
|
|
|
|
|
enable |
NAT-Netstream-Policy Routing Commands |
2-3 |
|
enable snmp trap updown |
SNMP-RMON Commands |
1-8 |
|
execute |
File System Management Commands |
1-5 |
|
exit |
SSH Terminal Service Commands |
1-30 |
|
expired |
DHCP Commands |
1-23 |
|
|
|
|
|
file prompt |
File System Management Commands |
1-6 |
|
filter-policy export |
Routing Protocol Commands |
2-5 |
|
filter-policy export |
Routing Protocol Commands |
3-30 |
|
filter-policy export |
Routing Protocol Commands |
4-11 |
|
filter-policy export |
Routing Protocol Commands |
5-26 |
|
filter-policy import |
Routing Protocol Commands |
2-6 |
|
filter-policy import |
Routing Protocol Commands |
3-31 |
|
filter-policy import |
Routing Protocol Commands |
4-12 |
|
filter-policy import |
Routing Protocol Commands |
5-27 |
|
fixdisk |
File System Management Commands |
1-7 |
|
flow interval |
Port Basic Configuration Commands |
1-13 |
|
flow-control |
Login Commands |
1-6 |
|
flow-control |
Port Basic Configuration Commands |
1-11 |
|
flow-control enable |
Port Basic Configuration Commands |
1-12 |
|
format |
File System Management Commands |
1-7 |
|
free user-interface |
Login Commands |
1-7 |
|
frequency |
HWPing Commands |
1-5 |
|
ftp |
FTP and TFTP Commands |
1-12 |
|
ftp cluster |
Cluster Commands |
1-27 |
|
ftp server enable |
FTP and TFTP Commands |
1-2 |
|
ftp timeout |
FTP and TFTP Commands |
1-3 |
|
ftp-server |
Cluster Commands |
1-28 |
|
|
|
|
|
garp timer |
GVRP Commands |
1-2 |
|
garp timer leaveall |
GVRP Commands |
1-4 |
|
gateway-list |
DHCP Commands |
1-24 |
|
get |
SSH Terminal Service Commands |
1-30 |
|
get |
FTP and TFTP Commands |
1-13 |
|
gmrp |
Multicast Commands |
1-2 |
|
gratuitous-arp-learning enable |
ARP Commands |
1-16 |
|
group |
Routing Protocol Commands |
5-28 |
|
gvrp |
GVRP Commands |
1-7 |
|
gvrp registration |
GVRP Commands |
1-8 |
|
|
|
|
|
habp enable |
802.1x Commands |
2-3 |
|
habp server vlan |
802.1x Commands |
2-4 |
|
habp timer |
802.1x Commands |
2-5 |
|
hardspeedup |
Port Basic Configuration Commands |
1-13 |
|
header |
Login Commands |
1-8 |
|
help |
SSH Terminal Service Commands |
1-31 |
|
history-command max-size |
Login Commands |
1-10 |
|
holdtime |
Cluster Commands |
1-28 |
|
host-route |
Routing Protocol Commands |
2-7 |
|
hwping |
HWPing Commands |
1-6 |
|
hwping-agent enable |
HWPing Commands |
1-7 |
|
hwtacacs nas-ip |
AAA-RADIUS-HWTACACS-EAD Commands |
1-56 |
|
hwtacacs scheme |
AAA-RADIUS-HWTACACS-EAD Commands |
1-57 |
|
|
|
|
|
idle-cut |
AAA-RADIUS-HWTACACS-EAD Commands |
1-10 |
|
idle-timeout |
Login Commands |
1-11 |
|
if-match { acl | ip-prefix } |
Routing Protocol Commands |
6-10 |
|
if-match as-path |
Routing Protocol Commands |
6-10 |
|
if-match community |
Routing Protocol Commands |
6-11 |
|
if-match cost |
Routing Protocol Commands |
6-12 |
|
if-match interface |
Routing Protocol Commands |
6-13 |
|
if-match ip next-hop |
Routing Protocol Commands |
6-14 |
|
if-match tag |
Routing Protocol Commands |
6-15 |
|
igmp enable |
Multicast Commands |
5-3 |
|
igmp group-limit |
Multicast Commands |
5-4 |
|
igmp group-policy |
Multicast Commands |
5-5 |
|
igmp group-policy vlan |
Multicast Commands |
5-6 |
|
igmp host-join port |
Multicast Commands |
5-7 |
|
igmp host-join vlan |
Multicast Commands |
5-8 |
|
igmp lastmember-queryinterval |
Multicast Commands |
5-9 |
|
igmp max-response-time |
Multicast Commands |
5-10 |
|
igmp proxy |
Multicast Commands |
5-11 |
|
igmp report-aggregation |
Multicast Commands |
5-12 |
|
igmp robust-count |
Multicast Commands |
5-13 |
|
igmp timer other-querier-present |
Multicast Commands |
5-14 |
|
igmp timer query |
Multicast Commands |
5-15 |
|
igmp version |
Multicast Commands |
5-16 |
|
igmp-snooping |
Multicast Commands |
2-4 |
|
igmp-snooping fast-leave |
Multicast Commands |
2-5 |
|
igmp-snooping group-limit |
Multicast Commands |
2-6 |
|
igmp-snooping group-policy |
Multicast Commands |
2-7 |
|
igmp-snooping host-aging-time |
Multicast Commands |
2-9 |
|
igmp-snooping max-response-time |
Multicast Commands |
2-10 |
|
igmp-snooping report-aggregation |
Multicast Commands |
2-10 |
|
igmp-snooping router-aging-time |
Multicast Commands |
2-11 |
|
ignore-lsp-checksum-error |
Routing Protocol Commands |
4-13 |
|
import-route |
Routing Protocol Commands |
2-8 |
|
import-route |
Routing Protocol Commands |
3-32 |
|
import-route |
Routing Protocol Commands |
4-14 |
|
import-route |
Routing Protocol Commands |
5-29 |
|
import-route isis level-2 into level-1 |
Routing Protocol Commands |
4-15 |
|
inboundcar |
QoS Commands |
1-10 |
|
info-center channel |
Information Center Commands |
1-6 |
|
info-center console channel |
Information Center Commands |
1-7 |
|
info-center enable |
Information Center Commands |
1-8 |
|
info-center logbuffer |
Information Center Commands |
1-9 |
|
info-center loghost |
Information Center Commands |
1-10 |
|
info-center loghost source |
Information Center Commands |
1-11 |
|
info-center monitor channel |
Information Center Commands |
1-12 |
|
info-center snmp channel |
Information Center Commands |
1-12 |
|
info-center source |
Information Center Commands |
1-13 |
|
info-center timestamp |
Information Center Commands |
1-19 |
|
info-center trapbuffer |
Information Center Commands |
1-20 |
|
instance |
MSTP Commands |
1-6 |
|
interface |
Port Basic Configuration Commands |
1-14 |
|
interface Vlan-interface |
VLAN Commands |
1-6 |
|
ip |
IP Address-IP Performance-IPX Commands |
2-12 |
|
ip address |
IP Address-IP Performance-IPX Commands |
1-3 |
|
ip address |
Cluster Commands |
1-29 |
|
ip as-path-acl |
Routing Protocol Commands |
6-15 |
|
ip community-list |
Routing Protocol Commands |
6-16 |
|
ip forward-broadcast |
IP Address-IP Performance-IPX Commands |
2-13 |
|
ip host |
DNS Commands |
1-6 |
|
ip ip-prefix |
Routing Protocol Commands |
6-17 |
|
ip netstream aggregation |
NAT-Netstream-Policy Routing Commands |
2-4 |
|
ip netstream export dscp |
NAT-Netstream-Policy Routing Commands |
2-5 |
|
ip netstream export host |
NAT-Netstream-Policy Routing Commands |
2-6 |
|
ip netstream export source |
NAT-Netstream-Policy Routing Commands |
2-7 |
|
ip netstream export version |
NAT-Netstream-Policy Routing Commands |
2-7 |
|
ip netstream inbound source |
NAT-Netstream-Policy Routing Commands |
2-8 |
|
ip netstream outbound source |
NAT-Netstream-Policy Routing Commands |
2-9 |
|
ip netstream template refresh |
NAT-Netstream-Policy Routing Commands |
2-10 |
|
ip netstream template timeout |
NAT-Netstream-Policy Routing Commands |
2-10 |
|
ip netstream timeout active |
NAT-Netstream-Policy Routing Commands |
2-11 |
|
ip netstream timeout inactive |
NAT-Netstream-Policy Routing Commands |
2-12 |
|
ip route-static |
Routing Protocol Commands |
1-15 |
|
ip route-static default-preference |
Routing Protocol Commands |
1-16 |
|
ip userlog nat active-time |
NAT-Netstream-Policy Routing Commands |
1-23 |
|
ip userlog nat export host |
NAT-Netstream-Policy Routing Commands |
1-23 |
|
ip userlog nat export source-ip |
NAT-Netstream-Policy Routing Commands |
1-24 |
|
ip userlog nat export version |
NAT-Netstream-Policy Routing Commands |
1-25 |
|
ip userlog nat mode flow-begin |
NAT-Netstream-Policy Routing Commands |
1-26 |
|
ip userlog nat slot |
NAT-Netstream-Policy Routing Commands |
1-22 |
|
ip-pool |
Cluster Commands |
1-30 |
|
ipx enable |
IP Address-IP Performance-IPX Commands |
3-9 |
|
ipx encapsulation |
IP Address-IP Performance-IPX Commands |
3-10 |
|
ipx netbios-propagation |
IP Address-IP Performance-IPX Commands |
3-10 |
|
ipx network |
IP Address-IP Performance-IPX Commands |
3-11 |
|
ipx rip import-route static |
IP Address-IP Performance-IPX Commands |
3-12 |
|
ipx rip mtu |
IP Address-IP Performance-IPX Commands |
3-12 |
|
ipx rip multiplier |
IP Address-IP Performance-IPX Commands |
3-13 |
|
ipx rip timer update |
IP Address-IP Performance-IPX Commands |
3-14 |
|
ipx route load-balance-path |
IP Address-IP Performance-IPX Commands |
3-14 |
|
ipx route max-reserve-path |
IP Address-IP Performance-IPX Commands |
3-15 |
|
ipx route-static |
IP Address-IP Performance-IPX Commands |
3-16 |
|
ipx sap disable |
IP Address-IP Performance-IPX Commands |
3-17 |
|
ipx sap gns-disable-reply |
IP Address-IP Performance-IPX Commands |
3-17 |
|
ipx sap gns-load-balance |
IP Address-IP Performance-IPX Commands |
3-18 |
|
ipx sap max-reserve-servers |
IP Address-IP Performance-IPX Commands |
3-19 |
|
ipx sap mtu |
IP Address-IP Performance-IPX Commands |
3-19 |
|
ipx sap multiplier |
IP Address-IP Performance-IPX Commands |
3-20 |
|
ipx sap timer update |
IP Address-IP Performance-IPX Commands |
3-21 |
|
ipx service |
IP Address-IP Performance-IPX Commands |
3-21 |
|
ipx split-horizon |
IP Address-IP Performance-IPX Commands |
3-23 |
|
ipx tick |
IP Address-IP Performance-IPX Commands |
3-23 |
|
ipx update-change-only |
IP Address-IP Performance-IPX Commands |
3-24 |
|
isis |
Routing Protocol Commands |
4-16 |
|
isis authentication-mode |
Routing Protocol Commands |
4-17 |
|
isis circuit-level |
Routing Protocol Commands |
4-18 |
|
isis cost |
Routing Protocol Commands |
4-19 |
|
isis dis-priority |
Routing Protocol Commands |
4-20 |
|
isis enable |
Routing Protocol Commands |
4-20 |
|
isis mesh-group |
Routing Protocol Commands |
4-21 |
|
isis timer csnp |
Routing Protocol Commands |
4-22 |
|
isis timer hello |
Routing Protocol Commands |
4-23 |
|
isis timer holding-multiplier |
Routing Protocol Commands |
4-24 |
|
isis timer lsp |
Routing Protocol Commands |
4-25 |
|
isis timer retransmit |
Routing Protocol Commands |
4-26 |
|
is-level |
Routing Protocol Commands |
4-26 |
|
isolate-user-vlan |
Extended VLAN Application Commands |
2-2 |
|
isolate-user-vlan enable |
Extended VLAN Application Commands |
2-3 |
|
|
|
|
|
jumboframe enable |
Port Basic Configuration Commands |
1-15 |
|
|
|
|
|
key |
AAA-RADIUS-HWTACACS-EAD Commands |
1-32 |
|
key |
AAA-RADIUS-HWTACACS-EAD Commands |
1-58 |
|
|
|
|
|
lacp enable |
Link Aggregation Commands |
1-6 |
|
lacp port-priority |
Link Aggregation Commands |
1-6 |
|
lacp system-priority |
Link Aggregation Commands |
1-7 |
|
language-mode |
System Maintenance and Debugging Commands |
1-4 |
|
lcd |
FTP and TFTP Commands |
1-14 |
|
level |
AAA-RADIUS-HWTACACS-EAD Commands |
1-11 |
|
line-rate |
QoS Commands |
1-11 |
|
link-aggregation |
Link Aggregation Commands |
1-7 |
|
link-aggregation group description |
Link Aggregation Commands |
1-8 |
|
link-aggregation group mode |
Link Aggregation Commands |
1-9 |
|
loadsharing enable |
System Maintenance and Debugging Commands |
3-10 |
|
local-server |
AAA-RADIUS-HWTACACS-EAD Commands |
1-33 |
|
local-user |
AAA-RADIUS-HWTACACS-EAD Commands |
1-12 |
|
local-user password-display-mode |
AAA-RADIUS-HWTACACS-EAD Commands |
1-13 |
|
lock |
Login Commands |
1-12 |
|
logging-host |
Cluster Commands |
1-31 |
|
log-peer-change |
Routing Protocol Commands |
4-27 |
|
loopback-detection enable |
Port Basic Configuration Commands |
1-16 |
|
loopback-detection interval-time |
Port Basic Configuration Commands |
1-17 |
|
ls |
SSH Terminal Service Commands |
1-31 |
|
ls |
FTP and TFTP Commands |
1-15 |
|
|
|
|
|
mac-address |
MAC Address Table Commands |
1-4 |
|
mac-address learning synchronization |
MAC Address Table Commands |
1-6 |
|
mac-address mac-learning disable |
MAC Address Table Commands |
1-6 |
|
mac-address max-mac-count |
MAC Address Table Commands |
1-7 |
|
mac-address multicast interface |
Multicast Commands |
4-1 |
|
mac-address timer |
MAC Address Table Commands |
1-8 |
|
md5-compatible |
Routing Protocol Commands |
4-28 |
|
mdi |
Port Basic Configuration Commands |
1-17 |
|
memory { safety | limit }* |
Routing Protocol Commands |
7-5 |
|
memory auto-establish disable |
Routing Protocol Commands |
7-3 |
|
memory auto-establish enable |
Routing Protocol Commands |
7-4 |
|
messenger |
AAA-RADIUS-HWTACACS-EAD Commands |
1-14 |
|
mirrored-to |
Mirroring Commands |
1-3 |
|
mirroring-group |
Mirroring Commands |
1-6 |
|
mirroring-group (only for Recovery) |
Mirroring Commands |
1-6 |
|
mirroring-group mirroring-port |
Mirroring Commands |
1-7 |
|
mirroring-group monitor-port |
Mirroring Commands |
1-8 |
|
mirroring-group reflector-port |
Mirroring Commands |
1-9 |
|
mirroring-group remote-probe vlan |
Mirroring Commands |
1-10 |
|
mkdir |
SSH Terminal Service Commands |
1-32 |
|
mkdir |
File System Management Commands |
1-8 |
|
mkdir |
FTP and TFTP Commands |
1-16 |
|
modem |
Login Commands |
1-12 |
|
modem auto-answer |
Login Commands |
1-13 |
|
modem timer answer |
Login Commands |
1-14 |
|
monitor inner-channel |
Hardware-Dependent Software Configuration Commands |
1-3 |
|
monitor inner-channel |
Hardware-Dependent Software Configuration Commands |
1-4 |
|
monitor slot |
Hardware-Dependent Software Configuration Commands |
1-5 |
|
more |
File System Management Commands |
1-8 |
|
move |
File System Management Commands |
1-9 |
|
multicast route-limit |
Multicast Commands |
3-8 |
|
multicast routing-enable |
Multicast Commands |
3-9 |
|
multicast static-router-port |
Multicast Commands |
3-9 |
|
multicast static-router-port vlan |
Multicast Commands |
3-10 |
|
multicast wrongif-holdtime |
Multicast Commands |
3-11 |
|
multicast-source-deny |
Multicast Commands |
3-12 |
|
multicast-suppression |
Port Basic Configuration Commands |
1-18 |
|
multicast-vlan enable |
Multicast Commands |
2-12 |
|
multicast-vlan subvlan |
Multicast Commands |
2-13 |
|
|
|
|
|
name |
VLAN Commands |
1-6 |
|
name |
AAA-RADIUS-HWTACACS-EAD Commands |
1-15 |
|
nas-ip |
AAA-RADIUS-HWTACACS-EAD Commands |
1-34 |
|
nas-ip |
AAA-RADIUS-HWTACACS-EAD Commands |
1-59 |
|
nat address-group |
NAT-Netstream-Policy Routing Commands |
1-6 |
|
nat aging-time |
NAT-Netstream-Policy Routing Commands |
1-7 |
|
nat blacklist limit amount |
NAT-Netstream-Policy Routing Commands |
1-10 |
|
nat blacklist limit rate |
NAT-Netstream-Policy Routing Commands |
1-11 |
|
nat blacklist limit rate source |
NAT-Netstream-Policy Routing Commands |
1-13 |
|
nat blacklist mode |
NAT-Netstream-Policy Routing Commands |
1-8 |
|
nat blacklist start |
NAT-Netstream-Policy Routing Commands |
1-8 |
|
nat ftp server |
NAT-Netstream-Policy Routing Commands |
1-20 |
|
nat outbound |
NAT-Netstream-Policy Routing Commands |
1-14 |
|
nat server |
NAT-Netstream-Policy Routing Commands |
1-16 |
|
nbns-list |
DHCP Commands |
1-25 |
|
ndp enable |
Cluster Commands |
1-3 |
|
ndp timer aging |
Cluster Commands |
1-4 |
|
ndp timer hello |
Cluster Commands |
1-5 |
|
netbios-type |
DHCP Commands |
1-26 |
|
network |
Routing Protocol Commands |
2-9 |
|
network |
Routing Protocol Commands |
3-34 |
|
network |
Routing Protocol Commands |
5-30 |
|
network |
Traffic Accounting Commands |
1-5 |
|
network |
DHCP Commands |
1-27 |
|
network-entity |
Routing Protocol Commands |
4-29 |
|
nssa |
Routing Protocol Commands |
3-35 |
|
ntdp enable |
Cluster Commands |
1-9 |
|
ntdp explore |
Cluster Commands |
1-10 |
|
ntdp hop |
Cluster Commands |
1-11 |
|
ntdp timer |
Cluster Commands |
1-12 |
|
ntdp timer hop-delay |
Cluster Commands |
1-13 |
|
ntdp timer port-delay |
Cluster Commands |
1-13 |
|
ntp-service access |
NTP Commands |
1-4 |
|
ntp-service authentication enable |
NTP Commands |
1-5 |
|
ntp-service authentication-keyid |
NTP Commands |
1-5 |
|
ntp-service broadcast-client |
NTP Commands |
1-6 |
|
ntp-service broadcast-server |
NTP Commands |
1-7 |
|
ntp-service disable |
NTP Commands |
1-8 |
|
ntp-service in-interface disable |
NTP Commands |
1-8 |
|
ntp-service max-dynamic-sessions |
NTP Commands |
1-9 |
|
ntp-service multicast-client |
NTP Commands |
1-10 |
|
ntp-service multicast-server |
NTP Commands |
1-10 |
|
ntp-service refclock-master |
NTP Commands |
1-11 |
|
ntp-service reliable authentication-keyid |
NTP Commands |
1-12 |
|
ntp-service source-interface |
NTP Commands |
1-13 |
|
ntp-service unicast-peer |
NTP Commands |
1-14 |
|
ntp-service unicast-server |
NTP Commands |
1-15 |
|
|
|
|
|
open |
FTP and TFTP Commands |
1-17 |
|
option |
DHCP Commands |
1-27 |
|
ospf |
Routing Protocol Commands |
3-36 |
|
ospf authentication-mode |
Routing Protocol Commands |
3-37 |
|
ospf cost |
Routing Protocol Commands |
3-38 |
|
ospf dr-priority |
Routing Protocol Commands |
3-38 |
|
ospf mib-binding |
Routing Protocol Commands |
3-39 |
|
ospf mtu-enable |
Routing Protocol Commands |
3-40 |
|
ospf network-type |
Routing Protocol Commands |
3-40 |
|
ospf timer dead |
Routing Protocol Commands |
3-42 |
|
ospf timer hello |
Routing Protocol Commands |
3-43 |
|
ospf timer poll |
Routing Protocol Commands |
3-43 |
|
ospf timer retransmit |
Routing Protocol Commands |
3-44 |
|
ospf trans-delay |
Routing Protocol Commands |
3-45 |
|
|
|
|
|
packet-filter |
ACL Commands |
1-10 |
|
parity |
Login Commands |
1-14 |
|
passive |
FTP and TFTP Commands |
1-18 |
|
password |
AAA-RADIUS-HWTACACS-EAD Commands |
1-15 |
|
pause-protection |
System Maintenance and Debugging Commands |
3-11 |
|
peer |
Routing Protocol Commands |
2-10 |
|
peer |
Routing Protocol Commands |
3-45 |
|
peer advertise-community |
Routing Protocol Commands |
5-30 |
|
peer allow-as-loop |
Routing Protocol Commands |
5-31 |
|
peer as-number |
Routing Protocol Commands |
5-32 |
|
peer as-path-acl export |
Routing Protocol Commands |
5-32 |
|
peer as-path-acl import |
Routing Protocol Commands |
5-33 |
|
peer connect-interface |
Routing Protocol Commands |
5-34 |
|
peer default-route-advertise |
Routing Protocol Commands |
5-35 |
|
peer description |
Routing Protocol Commands |
5-35 |
|
peer ebgp-max-hop |
Routing Protocol Commands |
5-36 |
|
peer enable |
Routing Protocol Commands |
5-37 |
|
peer filter-policy export |
Routing Protocol Commands |
5-38 |
|
peer filter-policy import |
Routing Protocol Commands |
5-39 |
|
peer group |
Routing Protocol Commands |
5-39 |
|
peer ip-prefix export |
Routing Protocol Commands |
5-40 |
|
peer ip-prefix import |
Routing Protocol Commands |
5-41 |
|
peer next-hop-local |
Routing Protocol Commands |
5-42 |
|
peer password |
Routing Protocol Commands |
5-42 |
|
peer public-as-only |
Routing Protocol Commands |
5-43 |
|
peer reflect-client |
Routing Protocol Commands |
5-44 |
|
peer route-policy export |
Routing Protocol Commands |
5-45 |
|
peer route-policy import |
Routing Protocol Commands |
5-46 |
|
peer route-update-interval |
Routing Protocol Commands |
5-46 |
|
peer timer |
Routing Protocol Commands |
5-47 |
|
peer-public-key end |
SSH Terminal Service Commands |
1-5 |
|
pim |
Multicast Commands |
6-11 |
|
pim bsr-boundary |
Multicast Commands |
6-11 |
|
pim dm |
Multicast Commands |
6-12 |
|
pim neighbor-limit |
Multicast Commands |
6-13 |
|
pim neighbor-policy |
Multicast Commands |
6-14 |
|
pim sm |
Multicast Commands |
6-14 |
|
pim timer hello |
Multicast Commands |
6-15 |
|
ping |
System Maintenance and Debugging Commands |
2-1 |
|
poe enable |
PoE Commands |
1-7 |
|
poe enable slot |
PoE Commands |
1-8 |
|
poe legacy enable slot |
PoE Commands |
1-9 |
|
poe max-power |
PoE Commands |
1-10 |
|
poe max-power slot |
PoE Commands |
1-10 |
|
poe mode |
PoE Commands |
1-11 |
|
poe power max-value |
PoE Commands |
1-12 |
|
poe power-management |
PoE Commands |
1-12 |
|
poe priority |
PoE Commands |
1-13 |
|
poe upgrade |
PoE Commands |
1-14 |
|
poe-power input-thresh lower |
PoE Commands |
2-7 |
|
poe-power input-thresh upper |
PoE Commands |
2-7 |
|
poe-power output-thresh lower |
PoE Commands |
2-8 |
|
poe-power output-thresh upper |
PoE Commands |
2-9 |
|
port |
VLAN Commands |
1-9 |
|
port |
Port Isolation Commands |
1-2 |
|
port access vlan |
VLAN Commands |
1-10 |
|
port hybrid protocol-vlan vlan |
VLAN Commands |
1-17 |
|
port hybrid pvid vlan |
VLAN Commands |
1-10 |
|
port hybrid vlan |
VLAN Commands |
1-11 |
|
port isolate group |
Port Isolation Commands |
1-3 |
|
port link-aggregation group |
Link Aggregation Commands |
1-10 |
|
port link-type |
VLAN Commands |
1-12 |
|
port trunk permit vlan |
VLAN Commands |
1-13 |
|
port trunk pvid vlan |
VLAN Commands |
1-14 |
|
port-isolate group |
Port Isolation Commands |
1-4 |
|
preference |
Routing Protocol Commands |
2-11 |
|
preference |
Routing Protocol Commands |
3-46 |
|
preference |
Routing Protocol Commands |
4-30 |
|
preference |
Routing Protocol Commands |
5-48 |
|
primary accounting |
AAA-RADIUS-HWTACACS-EAD Commands |
1-35 |
|
primary accounting |
AAA-RADIUS-HWTACACS-EAD Commands |
1-60 |
|
primary authentication |
AAA-RADIUS-HWTACACS-EAD Commands |
1-36 |
|
primary authentication |
AAA-RADIUS-HWTACACS-EAD Commands |
1-60 |
|
primary authorization |
AAA-RADIUS-HWTACACS-EAD Commands |
1-61 |
|
priority |
QoS Commands |
1-12 |
|
priority trust |
QoS Commands |
1-12 |
|
protocol inbound |
Login Commands |
1-15 |
|
protocol inbound |
SSH Terminal Service Commands |
1-6 |
|
protocol multicast-mac enable |
Routing Protocol Commands |
3-47 |
|
protocol-vlan |
VLAN Commands |
1-19 |
|
protocol-vlan vlan slot |
VLAN Commands |
1-18 |
|
public-key-code begin |
SSH Terminal Service Commands |
1-7 |
|
public-key-code begin |
SSH Terminal Service Commands |
1-19 |
|
public-key-code end |
SSH Terminal Service Commands |
1-8 |
|
public-key-code end |
SSH Terminal Service Commands |
1-20 |
|
put |
SSH Terminal Service Commands |
1-33 |
|
put |
FTP and TFTP Commands |
1-19 |
|
pwd |
SSH Terminal Service Commands |
1-33 |
|
pwd |
File System Management Commands |
1-10 |
|
pwd |
FTP and TFTP Commands |
1-20 |
|
|
|
|
|
qe monitor |
System Maintenance and Debugging Commands |
3-12 |
|
qe monitor errpkt |
System Maintenance and Debugging Commands |
3-12 |
|
qe monitor errpkt check-time |
System Maintenance and Debugging Commands |
3-13 |
|
qe monitor overflow-threshold |
System Maintenance and Debugging Commands |
3-14 |
|
qos |
QoS Commands |
1-14 |
|
qos cos-local-precedence-map |
QoS Commands |
1-16 |
|
queue-scheduler |
QoS Commands |
1-18 |
|
quit |
SSH Terminal Service Commands |
1-20 |
|
quit |
SSH Terminal Service Commands |
1-34 |
|
quit |
FTP and TFTP Commands |
1-20 |
|
quit |
System Maintenance and Debugging Commands |
1-4 |
|
|
|
|
|
radius nas-ip |
AAA-RADIUS-HWTACACS-EAD Commands |
1-37 |
|
radius scheme |
AAA-RADIUS-HWTACACS-EAD Commands |
1-38 |
|
radius-scheme |
AAA-RADIUS-HWTACACS-EAD Commands |
1-16 |
|
raw-vlan-id inbound |
QinQ Commands |
2-1 |
|
rdram |
System Maintenance and Debugging Commands |
3-14 |
|
reboot |
System Maintenance and Debugging Commands |
3-15 |
|
reboot member |
Cluster Commands |
1-32 |
|
reflect between-clients |
Routing Protocol Commands |
5-49 |
|
reflector cluster-id |
Routing Protocol Commands |
5-49 |
|
refresh bgp |
Routing Protocol Commands |
5-50 |
|
region-name |
MSTP Commands |
1-7 |
|
register-policy |
Multicast Commands |
6-16 |
|
remotehelp |
FTP and TFTP Commands |
1-21 |
|
remote-probe vlan |
Mirroring Commands |
1-10 |
|
remove |
SSH Terminal Service Commands |
1-34 |
|
rename |
SSH Terminal Service Commands |
1-35 |
|
rename |
File System Management Commands |
1-11 |
|
reset |
Routing Protocol Commands |
2-12 |
|
reset acl counter |
ACL Commands |
1-12 |
|
reset arp |
ARP Commands |
1-17 |
|
reset arp attack-list |
ARP Commands |
1-17 |
|
reset bgp |
Routing Protocol Commands |
5-51 |
|
reset bgp dampening |
Routing Protocol Commands |
5-52 |
|
reset bgp flap-info |
Routing Protocol Commands |
5-52 |
|
reset bgp group |
Routing Protocol Commands |
5-53 |
|
reset counters interface |
Port Basic Configuration Commands |
1-20 |
|
reset dhcp server conflict |
DHCP Commands |
1-28 |
|
reset dhcp server ip-in-use |
DHCP Commands |
1-29 |
|
reset dhcp server statistics |
DHCP Commands |
1-30 |
|
reset dhcp-server |
DHCP Commands |
2-10 |
|
reset dhcp-snooping |
DHCP Commands |
3-5 |
|
reset dns dynamic-host |
DNS Commands |
1-7 |
|
reset dot1x statistics |
802.1x Commands |
1-20 |
|
reset garp statistics |
GVRP Commands |
1-5 |
|
reset hwtacacs statistics |
AAA-RADIUS-HWTACACS-EAD Commands |
1-62 |
|
reset igmp group |
Multicast Commands |
5-16 |
|
reset igmp-snooping statistics |
Multicast Commands |
2-14 |
|
reset ip netstream statistics |
NAT-Netstream-Policy Routing Commands |
2-13 |
|
reset ip statistics |
IP Address-IP Performance-IPX Commands |
2-13 |
|
reset ipx routing-table statistics protocol |
IP Address-IP Performance-IPX Commands |
3-24 |
|
reset ipx statistics |
IP Address-IP Performance-IPX Commands |
3-25 |
|
reset isis all |
Routing Protocol Commands |
4-30 |
|
reset isis peer |
Routing Protocol Commands |
4-31 |
|
reset lacp statistics |
Link Aggregation Commands |
1-10 |
|
reset logbuffer |
Information Center Commands |
1-21 |
|
reset multicast forwarding-table |
Multicast Commands |
3-13 |
|
reset multicast routing-table |
Multicast Commands |
3-14 |
|
reset nat |
NAT-Netstream-Policy Routing Commands |
1-19 |
|
reset ndp statistics |
Cluster Commands |
1-6 |
|
reset ospf |
Routing Protocol Commands |
3-48 |
|
reset pim neighbor |
Multicast Commands |
6-17 |
|
reset pim routing-table |
Multicast Commands |
6-17 |
|
reset radius statistics |
AAA-RADIUS-HWTACACS-EAD Commands |
1-39 |
|
reset recycle-bin |
File System Management Commands |
1-12 |
|
reset rrpp statistics |
RRPP Commands |
1-6 |
|
reset saved-configuration |
Configuration File Management Commands |
1-10 |
|
reset stop-accounting-buffer |
AAA-RADIUS-HWTACACS-EAD Commands |
1-39 |
|
reset stop-accounting-buffer |
AAA-RADIUS-HWTACACS-EAD Commands |
1-63 |
|
reset stp |
MSTP Commands |
1-7 |
|
reset tcp statistics |
IP Address-IP Performance-IPX Commands |
2-14 |
|
reset traffic-statistic |
QoS Commands |
1-19 |
|
reset trapbuffer |
Information Center Commands |
1-21 |
|
reset udp statistics |
IP Address-IP Performance-IPX Commands |
2-14 |
|
reset udp-helper packet |
UDP-Helper Commands |
1-1 |
|
reset vrrp statistics |
VRRP-HA Commands |
1-3 |
|
retry |
AAA-RADIUS-HWTACACS-EAD Commands |
1-41 |
|
retry realtime-accounting |
AAA-RADIUS-HWTACACS-EAD Commands |
1-42 |
|
retry stop-accounting |
AAA-RADIUS-HWTACACS-EAD Commands |
1-43 |
|
retry stop-accounting |
AAA-RADIUS-HWTACACS-EAD Commands |
1-64 |
|
return |
System Maintenance and Debugging Commands |
1-5 |
|
revision-level |
MSTP Commands |
1-8 |
|
ring |
RRPP Commands |
1-6 |
|
ring enable |
RRPP Commands |
1-9 |
|
rip |
Routing Protocol Commands |
2-12 |
|
rip authentication-mode |
Routing Protocol Commands |
2-13 |
|
rip input |
Routing Protocol Commands |
2-14 |
|
rip metricin |
Routing Protocol Commands |
2-15 |
|
rip metricout |
Routing Protocol Commands |
2-16 |
|
rip output |
Routing Protocol Commands |
2-17 |
|
rip split-horizon |
Routing Protocol Commands |
2-17 |
|
rip version |
Routing Protocol Commands |
2-18 |
|
rip work |
Routing Protocol Commands |
2-19 |
|
rmdir |
SSH Terminal Service Commands |
1-35 |
|
rmdir |
File System Management Commands |
1-13 |
|
rmdir |
FTP and TFTP Commands |
1-22 |
|
rmon alarm |
SNMP-RMON Commands |
2-9 |
|
rmon event |
SNMP-RMON Commands |
2-11 |
|
rmon history |
SNMP-RMON Commands |
2-12 |
|
rmon prialarm |
SNMP-RMON Commands |
2-13 |
|
rmon statistics |
SNMP-RMON Commands |
2-15 |
|
route-policy |
Routing Protocol Commands |
6-18 |
|
router id |
Routing Protocol Commands |
3-49 |
|
router id |
Routing Protocol Commands |
5-53 |
|
rrpp domain |
RRPP Commands |
1-10 |
|
rrpp enable |
RRPP Commands |
1-11 |
|
rsa local-key-pair create |
SSH Terminal Service Commands |
1-9 |
|
rsa local-key-pair destroy |
SSH Terminal Service Commands |
1-10 |
|
rsa peer-public-key |
SSH Terminal Service Commands |
1-11 |
|
rsa peer-public-key |
SSH Terminal Service Commands |
1-21 |
|
rule (Advanced ACL) |
ACL Commands |
1-15 |
|
rule (Basic ACL) |
ACL Commands |
1-13 |
|
rule (Layer 2 ACL) |
ACL Commands |
1-21 |
|
rule (user-defined ACL) |
ACL Commands |
1-24 |
|
|
|
|
|
save |
Configuration File Management Commands |
1-11 |
|
schedule reboot at |
System Maintenance and Debugging Commands |
3-15 |
|
schedule reboot delay |
System Maintenance and Debugging Commands |
3-17 |
|
scheme |
AAA-RADIUS-HWTACACS-EAD Commands |
1-17 |
|
screen-length |
Login Commands |
1-16 |
|
secondary accounting |
AAA-RADIUS-HWTACACS-EAD Commands |
1-44 |
|
secondary accounting |
AAA-RADIUS-HWTACACS-EAD Commands |
1-65 |
|
secondary authentication |
AAA-RADIUS-HWTACACS-EAD Commands |
1-45 |
|
secondary authentication |
AAA-RADIUS-HWTACACS-EAD Commands |
1-65 |
|
secondary authorization |
AAA-RADIUS-HWTACACS-EAD Commands |
1-66 |
|
security-policy-server |
AAA-RADIUS-HWTACACS-EAD Commands |
2-1 |
|
self-service-url |
AAA-RADIUS-HWTACACS-EAD Commands |
1-18 |
|
send |
Login Commands |
1-16 |
|
server-type |
AAA-RADIUS-HWTACACS-EAD Commands |
1-45 |
|
service-type |
Login Commands |
1-17 |
|
service-type |
AAA-RADIUS-HWTACACS-EAD Commands |
1-19 |
|
set authentication password |
Login Commands |
1-19 |
|
set inlink |
Hardware-Dependent Software Configuration Commands |
1-2 |
|
set-overload |
Routing Protocol Commands |
4-31 |
|
sftp |
SSH Terminal Service Commands |
1-36 |
|
sftp server enable |
SSH Terminal Service Commands |
1-25 |
|
shell |
Login Commands |
1-20 |
|
shutdown |
VLAN Commands |
1-7 |
|
shutdown |
Port Basic Configuration Commands |
1-20 |
|
silent-interface |
Routing Protocol Commands |
3-49 |
|
silent-interface |
Routing Protocol Commands |
4-32 |
|
slave auto-update config |
VRRP-HA Commands |
2-1 |
|
slave restart |
VRRP-HA Commands |
2-2 |
|
slave switchover |
VRRP-HA Commands |
2-2 |
|
slave update configuration |
VRRP-HA Commands |
2-3 |
|
snmp-agent |
SNMP-RMON Commands |
1-9 |
|
snmp-agent community |
Login Commands |
2-1 |
|
snmp-agent community |
SNMP-RMON Commands |
1-10 |
|
snmp-agent group |
Login Commands |
2-2 |
|
snmp-agent group |
SNMP-RMON Commands |
1-11 |
|
snmp-agent local-engineid |
SNMP-RMON Commands |
1-12 |
|
snmp-agent mib-view |
SNMP-RMON Commands |
1-12 |
|
snmp-agent packet max-size |
SNMP-RMON Commands |
1-13 |
|
snmp-agent sys-info |
SNMP-RMON Commands |
1-14 |
|
snmp-agent target-host |
SNMP-RMON Commands |
1-15 |
|
snmp-agent trap enable |
SNMP-RMON Commands |
1-16 |
|
snmp-agent trap enable ospf |
Routing Protocol Commands |
3-50 |
|
snmp-agent trap life |
SNMP-RMON Commands |
1-18 |
|
snmp-agent trap queue-size |
SNMP-RMON Commands |
1-18 |
|
snmp-agent trap source |
SNMP-RMON Commands |
1-19 |
|
snmp-agent usm-user |
Login Commands |
2-4 |
|
snmp-agent usm-user |
SNMP-RMON Commands |
1-20 |
|
snmp-host |
Cluster Commands |
1-32 |
|
source-policy |
Multicast Commands |
6-19 |
|
speed |
Login Commands |
1-21 |
|
speed |
Port Basic Configuration Commands |
1-21 |
|
speedup |
Port Basic Configuration Commands |
1-22 |
|
spf-delay-interval |
Routing Protocol Commands |
4-33 |
|
spf-schedule-interval |
Routing Protocol Commands |
3-51 |
|
spf-slice-size |
Routing Protocol Commands |
4-34 |
|
ssh authentication-type default |
SSH Terminal Service Commands |
1-11 |
|
ssh client assign rsa-key |
SSH Terminal Service Commands |
1-22 |
|
ssh client first-time enable |
SSH Terminal Service Commands |
1-22 |
|
ssh server authentication-retries |
SSH Terminal Service Commands |
1-12 |
|
ssh server compatible-ssh1x enable |
SSH Terminal Service Commands |
1-13 |
|
ssh server rekey-interval |
SSH Terminal Service Commands |
1-14 |
|
ssh server timeout |
SSH Terminal Service Commands |
1-15 |
|
ssh user |
SSH Terminal Service Commands |
1-15 |
|
ssh user assign rsa-key |
SSH Terminal Service Commands |
1-16 |
|
ssh user authentication-type |
SSH Terminal Service Commands |
1-17 |
|
ssh user service-type |
SSH Terminal Service Commands |
1-26 |
|
ssh2 |
SSH Terminal Service Commands |
1-23 |
|
startup saved-configuration |
Configuration File Management Commands |
1-12 |
|
state |
AAA-RADIUS-HWTACACS-EAD Commands |
1-20 |
|
state |
AAA-RADIUS-HWTACACS-EAD Commands |
1-46 |
|
static-bind ip-address |
DHCP Commands |
1-30 |
|
static-bind mac-address |
DHCP Commands |
1-31 |
|
static-rp |
Multicast Commands |
6-20 |
|
stop-accounting-buffer enable |
AAA-RADIUS-HWTACACS-EAD Commands |
1-47 |
|
stop-accounting-buffer enable |
AAA-RADIUS-HWTACACS-EAD Commands |
1-67 |
|
stopbits |
Login Commands |
1-21 |
|
stp |
MSTP Commands |
1-9 |
|
stp bpdu-protection |
MSTP Commands |
1-10 |
|
stp bridge-diameter |
MSTP Commands |
1-11 |
|
stp config-digest-snooping |
MSTP Commands |
1-12 |
|
stp cost |
MSTP Commands |
1-13 |
|
stp edged-port |
MSTP Commands |
1-14 |
|
stp interface |
MSTP Commands |
1-15 |
|
stp interface config-digest-snooping |
MSTP Commands |
1-16 |
|
stp interface cost |
MSTP Commands |
1-18 |
|
stp interface edged-port |
MSTP Commands |
1-19 |
|
stp interface loop-protection |
MSTP Commands |
1-20 |
|
stp interface mcheck |
MSTP Commands |
1-21 |
|
stp interface no-agreement-check |
MSTP Commands |
1-22 |
|
stp interface point-to-point |
MSTP Commands |
1-23 |
|
stp interface port priority |
MSTP Commands |
1-24 |
|
stp interface root-protection |
MSTP Commands |
1-25 |
|
stp interface transmit-limit |
MSTP Commands |
1-27 |
|
stp loop-protection |
MSTP Commands |
1-27 |
|
stp max-hops |
MSTP Commands |
1-28 |
|
stp mcheck |
MSTP Commands |
1-29 |
|
stp mode |
MSTP Commands |
1-30 |
|
stp no-agreement-check |
MSTP Commands |
1-31 |
|
stp pathcost-standard |
MSTP Commands |
1-32 |
|
stp point-to-point |
MSTP Commands |
1-34 |
|
stp port priority |
MSTP Commands |
1-35 |
|
stp priority |
MSTP Commands |
1-36 |
|
stp region-configuration |
MSTP Commands |
1-37 |
|
stp root primary |
MSTP Commands |
1-38 |
|
stp root secondary |
MSTP Commands |
1-39 |
|
stp root-protection |
MSTP Commands |
1-40 |
|
stp tc-protection |
MSTP Commands |
1-41 |
|
stp timer forward-delay |
MSTP Commands |
1-42 |
|
stp timer hello |
MSTP Commands |
1-43 |
|
stp timer max-age |
MSTP Commands |
1-44 |
|
stp timer-factor |
MSTP Commands |
1-45 |
|
stp transmit-limit |
MSTP Commands |
1-46 |
|
stub |
Routing Protocol Commands |
3-52 |
|
subvlan |
Extended VLAN Application Commands |
3-3 |
|
summary |
Routing Protocol Commands |
2-20 |
|
summary |
Routing Protocol Commands |
4-34 |
|
summary |
Routing Protocol Commands |
5-54 |
|
super |
CLI Commands |
1-2 |
|
super password |
CLI Commands |
1-3 |
|
supervlan |
Extended VLAN Application Commands |
3-4 |
|
sysname |
Login Commands |
1-22 |
|
sysname |
System Maintenance and Debugging Commands |
1-5 |
|
system-view |
System Maintenance and Debugging Commands |
1-6 |
|
|
|
|
|
tcp timer fin-timeout |
IP Address-IP Performance-IPX Commands |
2-15 |
|
tcp timer syn-timeout |
IP Address-IP Performance-IPX Commands |
2-15 |
|
tcp window |
IP Address-IP Performance-IPX Commands |
2-16 |
|
telnet |
Login Commands |
1-23 |
|
temperature-limit |
System Maintenance and Debugging Commands |
3-18 |
|
terminal debugging |
Information Center Commands |
1-21 |
|
terminal debugging |
System Maintenance and Debugging Commands |
1-12 |
|
terminal logging |
Information Center Commands |
1-22 |
|
terminal monitor |
Information Center Commands |
1-23 |
|
terminal trapping |
Information Center Commands |
1-23 |
|
test-enable |
HWPing Commands |
1-8 |
|
test-type |
HWPing Commands |
1-7 |
|
tftp get |
Cluster Commands |
1-33 |
|
tftp get |
FTP and TFTP Commands |
1-25 |
|
tftp put |
Cluster Commands |
1-34 |
|
tftp put |
FTP and TFTP Commands |
1-25 |
|
tftp-server |
Cluster Commands |
1-35 |
|
tftp-server acl |
FTP and TFTP Commands |
1-26 |
|
timeout |
HWPing Commands |
1-8 |
|
timer |
Routing Protocol Commands |
5-54 |
|
timer |
AAA-RADIUS-HWTACACS-EAD Commands |
1-48 |
|
timer |
Cluster Commands |
1-35 |
|
timer |
RRPP Commands |
1-11 |
|
timer lsp-max-age |
Routing Protocol Commands |
4-35 |
|
timer lsp-refresh |
Routing Protocol Commands |
4-36 |
|
timer quiet |
AAA-RADIUS-HWTACACS-EAD Commands |
1-49 |
|
timer quiet |
AAA-RADIUS-HWTACACS-EAD Commands |
1-68 |
|
timer realtime-accounting |
AAA-RADIUS-HWTACACS-EAD Commands |
1-50 |
|
timer realtime-accounting |
AAA-RADIUS-HWTACACS-EAD Commands |
1-69 |
|
timer response-timeout |
AAA-RADIUS-HWTACACS-EAD Commands |
1-51 |
|
timer response-timeout |
AAA-RADIUS-HWTACACS-EAD Commands |
1-70 |
|
timer spf |
Routing Protocol Commands |
4-37 |
|
time-range |
ACL Commands |
1-26 |
|
timers |
Routing Protocol Commands |
2-21 |
|
tracert |
System Maintenance and Debugging Commands |
2-3 |
|
traffic-accounting accounting-slot |
Traffic Accounting Commands |
1-6 |
|
traffic-accounting traffic-group |
Traffic Accounting Commands |
1-7 |
|
traffic-bandwidth |
QoS Commands |
1-22 |
|
traffic-group |
Traffic Accounting Commands |
1-8 |
|
traffic-limit |
QoS Commands |
1-24 |
|
traffic-priority |
QoS Commands |
1-26 |
|
traffic-red |
QoS Commands |
1-30 |
|
traffic-redirect |
QoS Commands |
1-31 |
|
traffic-redirect inbound ip-group |
NAT-Netstream-Policy Routing Commands |
3-2 |
|
traffic-redirect outbound ip-group |
NAT-Netstream-Policy Routing Commands |
3-4 |
|
traffic-remark-vlanid |
QoS Commands |
1-33 |
|
traffic-share-across-interface |
Routing Protocol Commands |
2-22 |
|
traffic-slot |
Traffic Accounting Commands |
1-8 |
|
traffic-statistic |
QoS Commands |
1-36 |
|
|
|
|
|
udp-helper enable |
UDP-Helper Commands |
1-2 |
|
udp-helper port |
UDP-Helper Commands |
1-2 |
|
udp-helper server |
UDP-Helper Commands |
1-4 |
|
umount |
File System Management Commands |
1-14 |
|
undelete |
File System Management Commands |
1-14 |
|
undo synchronization |
Routing Protocol Commands |
5-55 |
|
uplink monitor |
System Maintenance and Debugging Commands |
3-19 |
|
user |
FTP and TFTP Commands |
1-23 |
|
user privilege level |
Login Commands |
1-24 |
|
user-interface |
Login Commands |
1-24 |
|
user-name-format |
AAA-RADIUS-HWTACACS-EAD Commands |
1-52 |
|
user-name-format |
AAA-RADIUS-HWTACACS-EAD Commands |
1-71 |
|
|
|
|
|
verbose |
FTP and TFTP Commands |
1-24 |
|
virtual-cable-test |
Port Basic Configuration Commands |
1-22 |
|
vlan |
VLAN Commands |
1-8 |
|
vlan-assignment-mode |
AAA-RADIUS-HWTACACS-EAD Commands |
1-21 |
|
vlan-mapping modulo |
MSTP Commands |
1-46 |
|
vlan-vpn enable |
QinQ Commands |
1-1 |
|
vlan-vpn tunnel |
MSTP Commands |
1-47 |
|
vlan-vpn vid |
QinQ Commands |
2-2 |
|
vlink-peer |
Routing Protocol Commands |
3-52 |
|
voice vlan |
Extended VLAN Application Commands |
1-4 |
|
voice vlan aging |
Extended VLAN Application Commands |
1-5 |
|
voice vlan enable |
Extended VLAN Application Commands |
1-5 |
|
voice vlan mac-address |
Extended VLAN Application Commands |
1-6 |
|
voice vlan mode |
Extended VLAN Application Commands |
1-7 |
|
voice vlan security enable |
Extended VLAN Application Commands |
1-8 |
|
vrrp authentication-mode |
VRRP-HA Commands |
1-3 |
|
vrrp method |
VRRP-HA Commands |
1-4 |
|
vrrp ping-enable |
VRRP-HA Commands |
1-5 |
|
vrrp vrid preempt-mode |
VRRP-HA Commands |
1-6 |
|
vrrp vrid priority |
VRRP-HA Commands |
1-7 |
|
vrrp vrid timer advertise |
VRRP-HA Commands |
1-8 |
|
vrrp vrid track |
VRRP-HA Commands |
1-9 |
|
vrrp vrid virtual-ip |
VRRP-HA Commands |
1-10 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
