12-EtoPPP和EtoFR命令
本章节下载: 12-EtoPPP和EtoFR命令 (110.69 KB)
【命令】
display etoppp translate [ interface interface-type interface-number ] [ | { begin | exclude | include } regular-expression ]
【视图】
任意视图
【缺省级别】
1:监控级
【参数】
interface interface-type interface-number:显示指定接口对应的EtoPPP转换表的信息。interface-type interface-number为接口类型和接口编号。
|:使用正则表达式对显示信息进行过滤。有关正则表达式的详细介绍,请参见“基础配置指导”中的“CLI”。
begin:从包含指定正则表达式的行开始显示。
exclude:只显示不包含指定正则表达式的行。
include:只显示包含指定正则表达式的行。
regular-expression:表示正则表达式,为1~256个字符的字符串,区分大小写。
【描述】
display etoppp translate命令用来显示EtoPPP转换表的信息和报文转换统计信息。
如果不指定接口,将显示所有接口对应的EtoPPP转换表的信息和报文转换统计信息。
【举例】
# 显示接口Ethernet1/1对应的EtoPPP转换表的信息和报文转换统计信息。
<Sysname> display etoppp translate interface ethernet 1/1
EtoPPP translate entry:
Ethernet 1/1, Status: Active
(CE) IP Address: 192.168.1.1, MAC Address: 00e0-fc00-0001
Serial 2/0, Status: Active
(PE) IP Address: 192.168.1.2
Ethernet 1/1 to Serial 2/0 translate statistics:
Translate IP packets: 100
Drop IP packets: 1
Drop Non-IP packets: 0
Serial 2/0 to Ethernet 1/1 translate statistics:
Translate IP packets: 200
Drop IP packets: 0
Drop Non-IP packets: 0
表1-1 display etoppp translate命令显示信息描述表
字段 |
描述 |
EtoPPP translate entry |
EtoPPP转换表 |
Ethernet 1/1 |
加入EtoPPP转换表的Ethernet接口名 |
Status |
Ethernet接口链路状态 |
(CE) IP Address |
和Etherent接口相连的设备的IP地址 |
MAC Address |
和Ethernet接口相连的设备的MAC地址 |
Serial 2/0 |
加入EtoPPP转换表的PPP接口名 |
Status |
接口(封装PPP协议)链路状态 |
(PE) IP Address |
和接口(封装PPP协议)相连的设备的IP地址 |
Ethernet 1/1 to Serial 2/0 translate statistics |
从Ethernet接口到封装PPP协议接口转换的报文统计 |
Translate IP packets |
转换成功的IP报文统计 |
Drop IP packets |
转换失败的IP报文统计 |
Drop Non-IP packets |
丢弃的非IP报文统计 |
Serial 2/0 to Ethernet 1/1 translate statistics |
从接口(封装PPP协议)到Ethernet接口转换的报文统计 |
Translate IP packets |
转换成功的IP报文统计 |
Drop IP packets |
转换失败的IP报文统计 |
Drop Non-IP packets |
丢弃的非IP报文统计 |
【命令】
etoppp translate interface interface-type1 interface-number1 interface-type2 interface-number2 ip-address ip-address1 ip-address2
undo etoppp translate interface interface-type1 interface-number1
【视图】
系统视图
【缺省级别】
2:系统级
【参数】
interface interface-type1 interface-number1:接口类型和接口编号。
interface-type2 interface-number2:接口类型和接口编号。
ip-address ip-address1:与设备的接口interface-type1 interface-number1相连的对端的IP地址。
ip-address2:与设备的接口interface-type2 interface-number2相连的对端的IP地址,和ip-address1应该在同一网段。
【描述】
etoppp translate命令用来在指定的两个接口间建立一条报文转换的通道。undo etoppp translate命令用来取消两个接口间建立的报文转换的通道。
缺省情况下,没有建立报文转换的通道。
相关配置可参考命令display etoppp translate。
【举例】
# 创建从Ethernet1/1到Serial2/0的EtoPPP映射。
<Sysname> system-view
[Sysname] etoppp translate interface ethernet 1/1 serial 2/0 ip-address 1.1.1.1 1.1.1.2
【命令】
reset etoppp translate [ interface interface-type interface-number ]
【视图】
用户视图
【缺省级别】
1:监控级
【参数】
interface interface-type interface-number:接口类型和接口编号。
【描述】
reset etoppp translate命令用来清除EtoPPP的报文转换统计信息。
不指定接口时,将清除EtoPPP转换表中所有接口EtoPPP的报文转换统计信息。
相关配置可参考命令display etoppp translate。
【举例】
# 清除接口Ethernet1/1的EtoPPP的报文转换统计信息。
<Sysname> reset etoppp translate interface ethernet 1/1
【命令】
display etofr translate [ interface interface-type interface-number ] [ | { begin | exclude | include } regular-expression ]
【视图】
任意视图
【缺省级别】
1:监控级
【参数】
interface interface-type interface-number:显示指定接口对应的EtoFR转换表的信息。interface-type interface-number为接口类型和接口编号。
|:使用正则表达式对显示信息进行过滤。有关正则表达式的详细介绍,请参见“基础配置指导”中的“CLI”。
begin:从包含指定正则表达式的行开始显示。
exclude:只显示不包含指定正则表达式的行。
include:只显示包含指定正则表达式的行。
regular-expression:表示正则表达式,为1~256个字符的字符串,区分大小写。
【描述】
display etofr translate命令用来显示EtoFR转换表的信息和报文转换统计信息。
如果不指定接口,将显示所有接口对应的EtoFR转换表的信息和报文转换统计信息。
【举例】
# 显示接口Ethernet1/1对应的EtoFR转换表的信息和报文转换统计信息。
<Sysname> display etofr translate interface ethernet 1/1
EtoFR translate entry:
Ethernet 1/1.1 , Vid: 20, Status: Active
(CE) IP Address: 192.168.1.1, MAC Address: 00e0-fc00-0001
Serial 2/0, DLCI: 20, Status: Active,
(PE) IP Address: 192.168.1.2
Ethernet 1/1.1 to Serial 2/0 translate statistics:
Translate IP packets: 100
Drop IP packets: 1
Drop Non-IP packets: 0
Serial 2/0 to Ethernet 1/1.1 translate statistics:
Translate IP packets: 200
Drop IP packets: 0
Drop Non-IP packets: 0
表1-2 display etofr translate命令显示信息描述表
字段 |
描述 |
EtoFR translate entry |
EtoFR转换表 |
Ethernet 1/1.1 |
加入EtoFR的Ethernet接口名 |
Vid |
Ethernet子接口对应的VLAN ID |
Status |
Ethernet子接口链路状态 |
(CE) IP Address |
和Etherent接口相连的设备的IP地址 |
MAC Address |
和Ethernet接口相连的接口的MAC地址 |
Serial 2/0 |
加入EtoFR的FR接口名 |
DLCI |
加入EtoFR的FR接口上的虚电路 |
Status |
FR接口链路状态 |
(PE) IP Address |
和FR接口相连的设备的IP地址 |
Ethernet 1/1.1 to Serial 2/0 translate statistics |
从Ethernet接口到FR接口转换的报文统计 |
Translate IP packets |
转换成功的IP报文统计 |
Drop IP packets |
转换失败的IP报文统计 |
Drop Non-IP packets |
丢弃的非IP报文统计 |
Serial 2/0 to Ethernet 1/1.1 translate statistics |
从FR接口到Ethernet接口转换的报文统计 |
Translate IP packets |
转换成功的IP报文统计 |
Drop IP packets |
转换失败的IP报文统计 |
Drop Non-IP packets |
丢弃的非IP报文统计 |
【命令】
etofr translate interface interface-type1 interface-number1 interface-type2 interface-number2 dlci dlci-number ip-address ip-address1 ip-address2
undo etofr translate interface-type1 interface-number1
【视图】
系统视图
【缺省级别】
2:系统级
【参数】
interface interface-type1 interface-number1:接口类型和接口编号。
interface-type2 interface-number2:接口类型和接口编号。
dlci dlci-number:为帧中继接口分配的虚电路号,取值范围为16~1007。
ip-address ip-address1:与设备的接口interface-type1 interface-number1相连的对端的IP地址。
ip-address2:与设备的接口interface-type2 interface-number2相连的对端的IP地址,和ip-address1应该在同一网段。
【描述】
etofr translate命令用来在指定的两个接口间建立一条报文转换的通道。undo etofr translate命令用来取消两个接口间建立的报文转换的通道。
缺省情况下,没有建立报文转换的通道。
相关配置可参考命令display etofr translate。
【举例】
# 创建从Ethernet1/1到Serial2/0的EtoFR映射。
<Sysname> system-view
[Sysname] etofr translate interface ethernet 1/1 serial 2/0 dlci 30 ip-address 10.1.1.1 10.1.1.10
【命令】
reset etofr translate [ interface interface-type interface-number ]
【视图】
用户视图
【缺省级别】
1:监控级
【参数】
interface interface-type interface-number:接口类型和接口编号。
【描述】
reset etofr translate命令用来清除EtoFR的报文转换统计信息。
不指定接口时,将清除EtoFR转换表中所有接口的EtoFR的报文转换统计信息。
相关配置可参考命令display etofr translate。
【举例】
# 清除接口Ethernet1/1的EtoFR的报文转换统计信息。
<Sysname> reset etofr translate interface ethernet 1/1
不同款型规格的资料略有差异, 详细信息请向具体销售和400咨询。H3C保留在没有任何通知或提示的情况下对资料内容进行修改的权利!