Contents

Appendix A  FRUs and compatibility matrixes· 1

MPUs· 1

Switching fabric modules· 1

Service modules· 1

Interface modules and interface subcards· 2

Interface switch modules· 3

Air filters· 4

Transceiver modules· 4

Power supplies· 4

Power cords· 4

DC power cord· 4

AC power cord· 4

HVDC power cord· 5

 

Appendix A  FRUs and compatibility matrixes

For compatibility between the gateway and the cards and transceiver modules, see the release notes.

MPUs

MPU is the core of the control management plane for the gateway. You can install one MPU, or two MPUs in 1+1 redundancy for the gateway. Table 1 shows the MPUs available for the M9000 gateway series.

Table 1 MPU and gateway compatibility

MPU model	Applicable gateways
NSQ1SUPB0	M9006/M9010/M9010-GM/M9014
NSQM1SUPD0	M9016-V

 

For more information about the MPUs, see the card manuals that come with the MPUs..

Switching fabric modules

The switching fabric modules are the core of the switching plane of the gateway. Table 2 describes the compatibility matrix between the M9000 gateways and switching fabric module models.

Table 2 Switching fabric module and gateway compatibility

Switching fabric module model	Applicable gateways
NSQ1FAB04B0	M9006
NSQ1FAB08D0	M9010 M9010-GM M9016-V (supported in R9153P34 and later versions)
NSQ1FAB12D0	M9014
NSQM1FAB08E0	M9016-V

 

Service modules

The gateway supports SC service modules, FG service modules, and security situation intelligent computer node modules. The services modules available for the gateway are described in Table 3, Table 4, and Table 5.

Table 3 SC service module and gateway compatibility

SC service module model	Description	Applicable gateways
NSQM1GMDSCA1	Network data encryption module	M9010-GM
NSQ1FWCEA0	Firewall module	M9006/M9010/M9014

 

Table 4 FG service module and gateway compatibility

FG service module model	Description	Applicable gateways
NSQM1FWEFGA0	Firewall module	M9006/M9010/M9014/M9016-V
NSQM1FWDFGB0	Firewall module
NSQM1FWDFG0	Firewall module
NSQM1FWDFGA1	Firewall module	M9006/M9010/M9014
NSQM1FWDFGB1	Firewall module
NSQM1FWDFGC1	Firewall module
NSQM1FWDFGC0	Firewall module
NSQM1FWDFGD1	Firewall module
NSQM1NATDFGA0	NAT module
NSQM1NATDFGB0	NAT module
NSQM1ADEDFGA0	Application delivery engine
NSQM1AFC2000GDFGA0	Anomaly flow cleaner module

 

Table 5 Compatibility between other service modules and the gateway

Service module model	Description	Applicable gateways
NSQM1SSICASK1	Security situation intelligent computer node module	M9006/M9010/M9014
NSQM1AIASKA1	Security engine module

 

For more information about the service modules, see the card manuals that come with the service modules.

Interface modules and interface subcards

The interface modules available for the gateway are described in Table 6.

Table 6 Interface module and gateway compatibility

Interface module model	Applicable gateways
NSQ1TGS8EA0	M9006/M9010/M9010-GM/M9014
NSQ1GT48EA0
NSQ1GP24TXEA0
NSQ1TGX4EA0
NSQ1GP48EB0
NSQ1TGS32SF0	M9006/M9010/M9010-GM/M9014/M9016-V
NSQ1QGS4SF0
NSQ1CGC2SE0
NSQM1TGS32QSSG0
NSQM1CGQ6SH0
NSQM1CGQ4TG24SHA0	M9006/M9010/M9014/M9016-V

 

The interface subcards are installed in the slots of interface switch modules. Table 7 describes the compatibility between interface switch modules and interface subcards.

Table 7 Compatibility matrix between interface switch modules and interface subcards

Interface subcard model	Applicable interface switch modules
NSQM2TG16GP40	NSQM1MBFEA0
NSQM1CGQ20
NSQM2QG2TG8GP40
NSQM2QG2GP40
NSQM2TG8GP40
NSQM2QG4GP40

 

For more information about the interface modules and interface subcards, see the card manuals that come with the interface modules and interface subcards.

Interface switch modules

An interface switch module provides two subslots for installing interface subcards. Table 8 describes the compatibility between interface switch modules and interface subcards.

Table 8 Compatibility matrix between interface switch modules and subcards

Interface switch module	Number of slots	Available subcards	Applicable gateways
NSQM1MBFEA0	2	·     NSQM2TG16GP40 ·     NSQM1CGQ20 (supported only in slot 2) ·     NSQM2QG2TG8GP40 ·     NSQM2QG2GP40 ·     NSQM2TG8GP40 ·     NSQM2QG4GP40	M9006/M9010/M9010-GM/M9014/M9016-V

 

Air filters

	CAUTION: Clean air filters periodically (at least once every three months) to guarantee adequate ventilation and avoid over-temperature.

 

To prevent dusts from entering the chassis, you can configure air filters for the gateway as needed and install the air filters at the air inlet vents.

The gateway air filters include the M9006 air filter, the M9010 air filter, the M9010-GM air filter, the M9014 air filter, and the M9016-V air filter. Order air filters compatible with your gateway.

Transceiver modules

The gateway supports multiple types of transceiver modules. For the transceiver modules available for the ports on a card, see the card manuals.

Power supplies

The power supplies available for the gateway are described in Table 9.

Table 9 Power supply and gateway compatibility

Power supply model	Applicable gateways
PSR2500-12A-A	M9006/M9010/M9010-GM/M9014/M9016-V
PSR2400-12D-A
PSR2500B-12AHD-F	M9016-V

 

Power cords

DC power cord

DC power cords are used for connecting the DC power supplies to the external DC power supply system.

Table 10 DC power cord specifications

DC power cord	Cable length	Cross-sectional area	Description
0404A0E1	3 m (9.84 ft)	13 mm2(0.02 in2)	Used on the NSQM1DC2400 power supply
0404A0E2	15 m (49.21 ft)	13 mm2(0.02 in2)

 

AC power cord

AC power cords are used for connecting the AC power supplies to the external AC power supply system.

·     Select AC power cords according to the power of the power supply.

·     The connector type varies by country or region. Select a compliant connector type as needed.

·     For the connector types of different countries or regions, see H3C Power Cords & Cables.

Table 11 AC power cord specifications

AC power cord	Cable length	Cross-sectional area	Description
04043396	3 m (9.84 ft)	3*1.5 mm2 (0.002 in2)	Used on the NSQM1AC2500 power supply

 

HVDC power cord

The M9016-V gateway supports the PSR2500B-12AHD-F power supply. Table 12 describes the available power cords for the power supply.

Table 12 HVDC power cord specifications

HVDC power cord	Cable length	Cross-sectional area	Cable type	Description
0404A0RL	3 m (9.84 ft)	3*1.5 mm2 (0.002 in2)	HVDC power cord	Used for HVDC or AC power supply
0404A0RP	3 m (9.84 ft)	3*1.5 mm2 (0.002 in2)	PDU AC power cord	Used for AC power supply
0404A0RQ	3 m (9.84 ft)	3*1.5 mm2 (0.002 in2)	AC power cord	Used for AC power supply