Login
- Table of Contents
-
- 06-Network
- 01-VRF
- 02-Interface
- 03-Interface pairs
- 04-Interface collaboration
- 05-4G
- 06-Security zones
- 07-VLAN
- 08-MAC
- 09-DNS
- 10-ARP
- 11-ND
- 12-GRE
- 13-IPsec
- 14-ADVPN
- 15-L2TP
- 16-SSL VPN
- 17-Routing table
- 18-Static routing
- 19-Policy-based routing
- 20-OSPF
- 21-BGP
- 22-RIP
- 23-IP multicast routing
- 24-PIM
- 25-IGMP
- 26-DHCP
- 27-HTTP
- 28-SSH
- 29-NTP
- 30-FTP
- 31-Telnet
- 32-MAC authentication
- 33-MAC address whitelist
- 34-MAC access silent MAC info
- 35-MAC access advanced settings
- 36-IP authentication
- 37-IPv4 whitelist
- 38-IPv6 whitelist
- 39-Wireless
- Related Documents
-
| Title | Size | Download |
|---|---|---|
| 38-IPv6 whitelist | 21.50 KB |
IPv6 whitelist
This help contains the following topics:
· Configure the IPv6 whitelist
Introduction
The IPv6 whitelist is used during the IP authentication. When the IPv6 address of a user is on the IPv6 whitelist, the user can directly pass authentication without being authenticated by the authentication server.
Configure the IPv6 whitelist
1. Click the Network tab.
2. In the navigation pane, select Security Access > IP Access > IPv6 Whitelist.
3. Click Create. The Create IPv6 Whitelist page opens.
4. Add an IPv6 whitelist user to the IPv6 whitelist.
Table 1 IPv6 whitelist user configuration items
|
Item |
Description |
|
Interface |
Select a device interface through the whitelist user accesses the network. |
|
IPv6 address |
Configure the IPv6 address of the whitelist user. |
|
ISP domain |
Configure the ISP domain used by the whitelist user. The authentication server must be set to none for the ISP domain. |
|
Description |
Configure the description of the whitelist user. |
5. Click OK.
