H3C S3600 Command Manual-Release 1602(V1.02)

HomeSupportSwitchesH3C S3600 Switch SeriesReference GuidesCommand ReferencesH3C S3600 Command Manual-Release 1602(V1.02)
00-1Cover
Title Size Download
00-1Cover 75.1 KB

 

 

 

 

H3C S3600 Series Ethernet Switches

Command Manual

 

 

 

Hangzhou H3C Technologies Co., Ltd.

http://www.h3c.com

 

Manual Version: 20090618-C-1.02

Product Version: Release 1602

 


 

Copyright © 2007-2009, Hangzhou H3C Technologies Co., Ltd. and its licensors

 

All Rights Reserved

No part of this manual may be reproduced or transmitted in any form or by any means without prior written consent of Hangzhou H3C Technologies Co., Ltd.

Trademarks

H3C, Adobe Systems, Aolynk, , H3Care, , TOP G, , IRF, NetPilot, Neocean, NeoVTL, SecPro, SecPoint, SecEngine, SecPath, Comware, Secware, Storware, NQA, VVG, V2G, VnG, PSPT, XGbus, N-Bus, TiGem, InnoVision and HUASAN are trademarks of Hangzhou H3C Technologies Co., Ltd.

All other trademarks that may be mentioned in this manual are the property of their respective owners.

Notice

The information in this document is subject to change without notice. Every effort has been made in the preparation of this document to ensure accuracy of the contents, but all statements, information, and recommendations in this document do not constitute the warranty of any kind, express or implied.

Technical Support

service@h3c.com

http://www.h3c.com


About This Manual

Organization

H3C S3600 Series Ethernet Switches Command Manual-Release 1602 is organized as follows:

Part

Contents

1 CLI

Introduces the commands used for switching between the command levels and command level setting.

2 Login

Introduces the commands used for logging into the Ethernet switch.

3 Configuration File Management

Introduces the commands used for configuration file management.

4 VLAN

Introduces the commands used for configuring VLAN.

5 IP Address and Performance

Introduces the commands used for IP address configuration and IP performance configuration.

6 Voice VLAN

Introduces the commands used for voice VLAN configuration.

7 GVRP

Introduces the commands used for GVRP configuration.

8 Port Basic Configuration

Introduces the commands used for basic port configuration.

9 Link Aggregation

Introduces the commands used for link aggregation.

10 Port Isolation

Introduces the commands used for port isolation.

11 Port Security-Port Binding

Introduces the commands used for port security configuration and port binding.

12 DLDP

Introduces the commands used for DLDP configuration.

13 MAC Address Table  Management

Introduces the commands used for MAC address forwarding table management.

14 Auto Detect

Introduces the commands used for auto detect configuration.

15 MSTP

Introduces the STP-related commands.

16 Routing Protocol

Introduces the commands used for routing protocol configuration.

17 Multicast

Introduces the commands used for multicast configuration.

18 802.1x and System Guard

Introduces the commands used for 802.1x and System Guard configuration.

19 AAA

Introduces the commands used for AAA, RADIUS, HWTACACS, and EAD configuration.

20 Web Authentication

Introduces the commands used for Web Authentication configuration.

21 MAC Address Authentication

Introduces the commands used for MAC address authentication configuration.

22 VRRP

Introduces the commands used for VRRP configuration.

23 ARP

Introduces the ARP-related commands.

24 DHCP

Introduces the commands used for DHCP server, DHCP relay, and DHCP-snooping configuration.

25 ACL

Introduces the ACL-related commands.

26 QoS-QoS Profile

Introduces the commands used for QoS and QoS profile configuration.

27 Web Cache Redirection

Introduces the commands used for Web cache redirection configuration.

28 Mirroring

Introduces the commands used for port mirroring.

29 IRF Fabric

Introduces the commands used for IRF fabric configuration.

30 Cluster

Introduces the commands used for cluster management.

31 PoE-PoE Profile

Introduces the commands used for PoE and PoE profile configuration.

32 UDP Helper

Introduces the commands used for UDP Helper configuration.

33 SNMP-RMON

Introduces the commands used for SNMP and RMON configuration.

34 NTP

Introduces the NTP-related commands.

35 SSH

Introduces the commands used for SSH configuration.

36 File System Management

Introduces the commands used for file system management.

37 FTP–SFTP-TFTP

Introduces the related commands of FTP, SFTP and TFTP.

38 Information Center

Introduces the commands used for information center configuration.

39 System Maintenance and Debugging

Introduces the commands used for system maintenance and debugging.

40 VLAN-VPN

Introduces the commands used for VLAN VPN configuration.

41 HWPing

Introduces the commands used for HWPing configuration.

42 IPv6 Management

Introduces the commands used for IPv6 Management configuration.

43 DNS

Introduces the commands used for DNS configuration.

44 Smart Link-Monitor Link

Introduces the commands used for Smart Link and Monitor Link configuration.

45 Access Management

Introduces the commands used for Access Management configuration

46 Appendix

Lists all the commands described in this command manual in an alphabetic order. The parts and pages where the commands are described are also given.

 

Conventions

The manual uses the following conventions:

Command conventions

Convention

Description

Boldface

The keywords of a command line are in Boldface.

italic

Command arguments are in italic.

[ ]

Items (keywords or arguments) in square brackets [ ] are optional.

{ x | y | ... }

Alternative items are grouped in braces and separated by vertical bars. One is selected.

[ x | y | ... ]

Optional alternative items are grouped in square brackets and separated by vertical bars. One or none is selected.

{ x | y | ... } *

Alternative items are grouped in braces and separated by vertical bars. A minimum of one or a maximum of all can be selected.

[ x | y | ... ] *

Optional alternative items are grouped in square brackets and separated by vertical bars. Many or none can be selected.

&<1-n>

The argument(s) before the ampersand (&) sign can be entered 1 to n times.

#

A line starting with the # sign is comments.

 

Symbols

Convention

Description

Means reader be extremely careful. Improper operation may cause bodily injury.

Means reader be careful. Improper operation may cause data loss or damage to equipment.

Means a complementary description.

 

Related Documentation

In addition to this manual, each H3C S3600 Series Ethernet Switches documentation set includes the following:

Manual

Description

H3C S3600 Series Ethernet Switches  Operation Manual-Release 1602

It is used for assisting the users in data configurations and typical applications.

H3C S3600 Series Ethernet Switches  Installation Manual

It provides information for the system installation.

 

Obtaining Documentation

You can access the most up-to-date H3C product documentation on the World Wide Web at this URL: http://www.h3c.com.

The following are the columns from which you can obtain different categories of product documentation:

[Products & Solutions]: Provides information about products and technologies, as well as solutions.

[Technical Support & Document > Technical Documents]: Provides several categories of product documentation, such as installation, configuration, and maintenance.

[Technical Support & Document > Software Download]: Provides the documentation released with the software version.

Documentation Feedback

You can e-mail your comments about product documentation to info@h3c.com.

We appreciate your comments.

  • Cloud & AI
  • InterConnect
  • Intelligent Computing
  • Security
  • SMB Products
  • Intelligent Terminal Products
  • Product Support Services
  • Technical Service Solutions
All Services
  • Resource Center
  • Policy
  • Online Help
All Support
  • Become a Partner
  • Partner Resources
  • Partner Business Management
All Partners
  • Profile
  • News & Events
  • Online Exhibition Center
  • Contact Us
All About Us
新华三官网