HH3C-DOT11-CFG-MIB

Object (OID)

Access

Syntax

Value range

Description

Implementation

hh3cDot11GlobalCountryCode (1.3.6.1.4.1.25506.2.75.4.1.1)

read-write

OCTET STRING

OCTET STRING(1..3)

Country code

As per the MIB.

Object (OID)

Access

Syntax

Value range

Description

Implementation

hh3cDot11StaKeepALiveTimerIntvl (1.3.6.1.4.1.25506.2.75.4.1.2)

read-write

Unsigned32

Standard MIB values.

Time interval for sending keep-alive messages between AP and clients. The default value is 0: Keep-alive function OFF

As per the MIB.

Object (OID)

Access

Syntax

Value range

Description

Implementation

hh3cDot11StaIdleTimerIntvl (1.3.6.1.4.1.25506.2.75.4.1.3)

read-write

INTEGER

normal(0), reboot(1)

Time interval between AP and terminal (in power-saving or wake-up) link idle

As per the MIB.

Object (OID)

Access

Syntax

Value range

Description

Implementation

hh3cDot11BroadcastProbeReply (1.3.6.1.4.1.25506.2.75.4.1.4)

read-write

TruthValue

true(1),

false(2)

Whether reply of broadcast probe message is enabled.

true: ON

false: OFF

As per the MIB.

Object (OID)

Access

Syntax

Value range

Description

Implementation

hh3cDot11APScanMode (1.3.6.1.4.1.25506.2.75.4.1.5)

read-write

INTEGER

active(1),

passive(2)

AP scanning mode.

The default value is passive(2).

As per the MIB.

Object (OID)

Access

Syntax

Value range

Description

Implementation

hh3cDot11ACCtrlTunnelSecSupport (1.3.6.1.4.1.25506.2.75.4.1.6)

read-write

Hh3cDot11TunnelSecSchemType

INTEGER{

cleartxt(1),

dtls(2),

ipsec(3)

}

Encryption mode supported by CAPWAP control tunnel

As per the MIB.

Object (OID)

Access

Syntax

Value range

Description

Implementation

hh3cDot11ACDataTunnelSecSupport (1.3.6.1.4.1.25506.2.75.4.1.7)

read-write

Hh3cDot11TunnelSecSchemType

INTEGER{

cleartxt(1),

dtls(2),

ipsec(3)

}

Encryption mode supported by the data channel. The default mode is cleartxt.

As per the MIB.

Object (OID)

Access

Syntax

Value range

Description

Implementation

hh3cDot11ACAutoAPSupport (1.3.6.1.4.1.25506.2.75.4.1.8)

read-write

TruthValue

true(1),

false(2)

Whether automatic AP is enabled:

true: ON

false: OFF

As per the MIB.

Object (OID)

Access

Syntax

Value range

Description

Implementation

hh3cDot11AutoAPName (1.3.6.1.4.1.25506.2.75.4.1.9)

read-write

OCTET STRING

OCTET STRING(0..127)

Name of the automatic AP to be hardened. This object does not support read operations.

As per the MIB.

Object (OID)

Access

Syntax

Value range

Description

Implementation

hh3cDot11PersistentName (1.3.6.1.4.1.25506.2.75.4.1.10)

read-write

OCTET STRING

OCTET STRING(0..127)

New name for the automatic AP to be hardened. This object does not support read operations.

As per the MIB.

Object (OID)

Access

Syntax

Value range

Description

Implementation

hh3cDot11IntfTrapThreshold (1.3.6.1.4.1.25506.2.75.4.1.11)

read-write

Integer32

Standard MIB values.

Threshold for interference alarm, if the signal strength of the device exceeds this threshold, relevant alarms will be sent.

As per the MIB.

Object (OID)

Access

Syntax

Value range

Description

Implementation

hh3cDot11MonitorInterval (1.3.6.1.4.1.25506.2.75.4.1.12)

read-write

Unsigned32

Unsigned32(0 | 5..15)

Monitoring time interval, in minutes. The default value is 0, the monitoring function will be changed to real-time mode.

As per the MIB.

Object (OID)

Access

Syntax

Value range

Description

Implementation

hh3cDot11SampleInterval (1.3.6.1.4.1.25506.2.75.4.1.13)

read-write

Unsigned32

Unsigned32(0 | 10..300)

Radio frequency statistical information sampling time interval, in seconds. The default value is 0

As per the MIB.

Object (OID)

Access

Syntax

Value range

Description

Implementation

hh3cDot11ChnlSwitChkInterval (1.3.6.1.4.1.25506.2.75.4.1.14)

read-write

Unsigned32

Unsigned32(8..180)

The time interval for channel switchover detection, in minutes. The default value is 8.

As per the MIB.

Object (OID)

Access

Syntax

Value range

Description

Implementation

hh3cDot11APUserUplimit (1.3.6.1.4.1.25506.2.75.4.1.15)

read-write

Unsigned32

Unsigned32(0..65535)

Maximum number of users allowed to access this AP.

As per the MIB.

Object (OID)

Access

Syntax

Value range

Description

Implementation

hh3cDot11APL2IsolateEnable (1.3.6.1.4.1.25506.2.75.4.1.16)

read-write

TruthValue

true(1),

false(2)

Whether Layer 2 isolation is enabled.

As per the MIB.

Object (OID)

Access

Syntax

Value range

Description

Implementation

hh3cDot11APBSSIDSupportNum (1.3.6.1.4.1.25506.2.75.4.1.17)

read-only

Integer32

Standard MIB values.

Maximum number of BSSIDs supported by the current AP.

As per the MIB.

Object (OID)

Access

Syntax

Value range

Description

Implementation

hh3cDot11APLastUpdateStatTime (1.3.6.1.4.1.25506.2.75.4.1.18)

read-only

DateAndTime

Standard MIB values.

Most recent date and time of statistical information update.

As per the MIB.

Object (OID)

Access

Syntax

Value range

Description

Implementation

hh3cDot11APDoSProtectEnable (1.3.6.1.4.1.25506.2.75.4.1.19)

read-write

TruthValue

true(1),

false(2)

Whether DOS protection is enabled.

As per the MIB.

Object (OID)

Access

Syntax

Value range

Description

Implementation

hh3cDot11MaxAPPerIf (1.3.6.1.4.1.25506.2.75.4.1.20)

read-write

Unsigned32

Unsigned32(0..65535)

Maximum number of APs that can be connected to the AC interface.

As per the MIB.

Object (OID)

Access

Syntax

Value range

Description

Implementation

hh3cDot11SampleTimeStamp (1.3.6.1.4.1.25506.2.75.4.1.21)

read-only

DateAndTime

Standard MIB values.

Start time of the current sampling cycle.

As per the MIB.

Object (OID)

Access

Syntax

Value range

Description

Implementation

hh3cDot11UplinkTrackId (1.3.6.1.4.1.25506.2.75.4.1.22)

read-write

Unsigned32

Standard MIB values.

AP track ID.

As per the MIB.

Object (OID)

Access

Syntax

Value range

Description

Implementation

hh3cDot11RtCollectSwitch (1.3.6.1.4.1.25506.2.75.4.1.23)

read-write

TruthValue

true(1),

false(2)

Enable or disable the real-time statistics function between AC and AP. If this value is set to true, hh3cDot11RtCollectIntvl will take effect; otherwise, hh3cDot11RglCollectIntvl will take effect.

As per the MIB.

Object (OID)

Access

Syntax

Value range

Description

Implementation

hh3cDot11RglCollectIntvl (1.3.6.1.4.1.25506.2.75.4.1.24)

read-write

Integer32

Standard MIB values.

Time interval for collecting statistical information periodically.

As per the MIB.

Object (OID)

Access

Syntax

Value range

Description

Implementation

hh3cDot11RtCollectIntvl (1.3.6.1.4.1.25506.2.75.4.1.25)

read-write

Integer32

Standard MIB values.

Time interval for real-time collection of statistical information.

As per the MIB.

Object (OID)

Access

Syntax

Value range

Description

Implementation

hh3cDot11AdjIntfTrapThreshold (1.3.6.1.4.1.25506.2.75.4.1.28)

read-write

Integer32

Standard MIB values.

The threshold for triggering neighboring interference alarms; if the signal strength of the device exceeds this value, the alarm will be sent.

As per the MIB.

Object (OID)

Access

Syntax

Value range

Description

Implementation

hh3cDot11AllAPMonitorMode (1.3.6.1.4.1.25506.2.75.4.1.29)

read-write

INTEGER

normal(1)

monitor(2)

hybrid(3)

AP operating mode.

As per the MIB.

Object (OID)

Access

Syntax

Value range

Description

Implementation

hh3cDot11GlobalApFmwUpdState (1.3.6.1.4.1.25506.2.75.4.1.30)

read-write

INTEGER

enable(1)

disable(2)

Whether the AP has the automatic version upgrade feature enabled.

As per the MIB.

Object (OID)

Access

Syntax

Value range

Description

Implementation

hh3cDot11ACNasIDCM (1.3.6.1.4.1.25506.2.75.4.1.31)

read-write

OCTET STRING

Standard MIB values.

Current NAS-ID of AC

As per the MIB.

Object (OID)

Access

Syntax

Value range

Description

Implementation

hh3cDot11ApRenameCurrentName (1.3.6.1.4.1.25506.2.75.4.1.39)

read-write

OCTET STRING

OCTET STRING(0..127)

Old name of the AP to be renamed. Read operations are not supported.

As per the MIB.

Object (OID)

Access

Syntax

Value range

Description

Implementation

hh3cDot11ApRenameNewName (1.3.6.1.4.1.25506.2.75.4.1.40)

read-write

OCTET STRING

OCTET STRING(0..127)

New name of the AP to be renamed. Read operations are not supported.

As per the MIB.

Object (OID)

Access

Syntax

Value range

Description

Implementation

hh3cDot11BackupACAdrssIP (1.3.6.1.4.1.25506.2.75.4.7.1)

read-write

InetAddress

OCTET STRING (0..255)

Backup AC IP address. If not configured, this value is 0.0.0.0

As per the MIB.

Object (OID)

Access

Syntax

Value range

Description

Implementation

hh3cDot11BackupACAdrssIPv6 (1.3.6.1.4.1.25506.2.75.4.7.2)

read-write

InetAddress

OCTET STRING (0..255)

Backup AC IPv6 address. If not configured, this value is 0::0

As per the MIB.

Object (OID)

Access

Syntax

Value range

Description

Implementation

hh3cDot11RadioPolicyName (1.3.6.1.4.1.25506.2.75.4.2.1.1.1)

not-accessible

OCTET STRING

OCTET STRING (0..127)

Name of the wireless policy

As per the MIB.

Object (OID)

Access

Syntax

Value range

Description

Implementation

hh3cDot11ServicePolicyID (1.3.6.1.4.1.25506.2.75.4.2.2.1.1)

not-accessible

Hh3cDot11ServicePolicyIDType

Standard MIB values.

Service policy ID

As per the MIB.

hh3cDot11SSIDName (1.3.6.1.4.1.25506.2.75.4.2.2.1.2)

read-create

Hh3cDot11SSIDStringType

Hh3cDot11SSIDStringType(1..32)

ESS. According to CLI, the value of the service policy name will be the SSID

As per the MIB.

hh3cDot11SSIDHidden (1.3.6.1.4.1.25506.2.75.4.2.2.1.3)

read-create

TruthValue

true(1),

false(2)

This attribute controls whether the SSID is published in the beacon frame. If true, the SSID will not be published in the beacon frame

As per the MIB.

hh3cDot11AuthenMode (1.3.6.1.4.1.25506.2.75.4.2.2.1.4)

read-create

Hh3cDot11AuthenType

none(1),

opensystem(2),

sharedkey(3),

all(4)

802.11 authentication mode

As per the MIB.

(Only supported by Comware 7-based products)

hh3cDot11SSIDEncryptionMode (1.3.6.1.4.1.25506.2.75.4.2.2.1.5)

read-create

Hh3cDot11SSIDEncryptModeType

cleartxt(1),

cipher(2),

ext(3)

Encryption mode for the ESS.

As per the MIB.

hh3cDot11WlanInfBindingType (1.3.6.1.4.1.25506.2.75.4.2.2.1.6)

read-create

OCTET STRING

Standard MIB values.

Which data forwarding interface the service policy will bind to

As per the MIB.

hh3cDot11WlanInfBindingID (1.3.6.1.4.1.25506.2.75.4.2.2.1.7)

read-create

Integer32

Standard MIB values.

The interface ID of the interface to which the ESS will bind. If this value is set to -1, the binding will be removed

As per the MIB.

hh3cDot11SrvPolicyRowStatus (1.3.6.1.4.1.25506.2.75.4.2.2.1.8)

read-create

RowStatus

active(1),

notInService(2),

notReady(3),

createAndGo(4),

createAndWait(5),

destroy(6)

Entry state.

As per the MIB.

hh3cDot11ClientMaxCount (1.3.6.1.4.1.25506.2.75.4.2.2.1.9)

read-create

Integer32

Integer32 (0..2147483647)

The maximum number of wireless clients supported by this service policy

As per the MIB.

hh3cDot11SPInCirMode (1.3.6.1.4.1.25506.2.75.4.2.2.1.10)

read-create

Hh3cDot11CirMode

static(1),

dynamic(2)

Inbound direction Committed Information Rate (CIR) mode. Only useful when the corresponding CIR is not 0. If the value of this node is changed, the corresponding CIR will be reset

As per the MIB.

hh3cDot11SPInCirValue (1.3.6.1.4.1.25506.2.75.4.2.2.1.11)

read-create

Integer32

Standard MIB values.

The CIR in the inbound direction of this service policy.

If this value is 0, the service policy should not apply flow control, and the corresponding CIR mode is meaningless

As per the MIB.

hh3cDot11SPOutCirMode (1.3.6.1.4.1.25506.2.75.4.2.2.1.12)

read-create

Hh3cDot11CirMode

static(1),

dynamic(2)

CIR (Committed Information Rate) outbound direction mode. Only useful when the corresponding CIR is not 0. If the value of this node is changed, the corresponding CIR will be reset

As per the MIB.

hh3cDot11SPOutCirValue (1.3.6.1.4.1.25506.2.75.4.2.2.1.13)

read-create

Integer32

Standard MIB values.

The CIR in the outbound direction of this service policy.

If this value is 0, flow control should not be applied to the service policy, and the corresponding CIR mode is meaningless

As per the MIB.

hh3cDot11WlanInfPVID (1.3.6.1.4.1.25506.2.75.4.2.2.1.14)

read-create

read-create

Standard MIB values.

VLAN ID of the SSID

As per the MIB.

hh3cDot11SPInCirStaticValue (1.3.6.1.4.1.25506.2.75.4.2.2.1.15)

read-create

Integer32

Standard MIB values.

CIR in the inbound direction under static CIR mode

As per the MIB.

hh3cDot11SPOutCirStaticValue (1.3.6.1.4.1.25506.2.75.4.2.2.1.16)

read-create

Integer32

Standard MIB values.

CIR in the outbound direction under static CIR mode

As per the MIB.

hh3cDot11SPIsolate (1.3.6.1.4.1.25506.2.75.4.2.2.1.17)

read-create

TruthValue

true(1),

false(2)

If true, wireless clients connected to this service policy are isolated

As per the MIB.

hh3cDot11WlanexAuthServerIP (1.3.6.1.4.1.25506.2.75.4.2.2.1.18)

read-create

IpAddress

Standard MIB values.

IP address of the Wlanex authentication server

As per the MIB.

hh3cDot11SPBeaconMeasEnable (1.3.6.1.4.1.25506.2.75.4.2.2.1.19)

read-create

TruthValue

true(1),

false(2)

Whether to enable beacon measurement

As per the MIB.

(Only supported by Comware 7-based products)

hh3cDot11SPBeaconMeasType (1.3.6.1.4.1.25506.2.75.4.2.2.1.20)

read-create

INTEGER

passive(1),

active(2),

beaconTable(3)

Work mode of beacon measurement type

As per the MIB.

hh3cDot11SPBeaconMeasInterval (1.3.6.1.4.1.25506.2.75.4.2.2.1.21)

read-create

Integer32

Integer32 (10..200)

Beacon measurement interval

As per the MIB.

hh3cDot11AuthenModeCM (1.3.6.1.4.1.25506.2.75.4.2.2.1.22)

read-create

INTEGER

opensystem(0),

sharedkey(1)

802.11 authentication mode

As per the MIB.

(Only supported by Comware 7-based products)

hh3cDot11SecIEStatusCM (1.3.6.1.4.1.25506.2.75.4.2.2.1.23)

read-create

INTEGER

none(0),

wpa(1),

wpa2(2),

wlanex(3)

Enable security information elements in beacons and probe response frames sent by the AP

As per the MIB.

hh3cDot11SecurityCiphersCM (1.3.6.1.4.1.25506.2.75.4.2.2.1.24)

read-create

INTEGER

none(0),

wep40(1),

wep104(2),

tkip(3),

aesccmp(4),

wpisms4(5)

Encryption methods supported by the WLAN system for encrypting data frames.

As per the MIB.

hh3cDot11SrvPolicyStatusCM (1.3.6.1.4.1.25506.2.75.4.2.2.1.25)

read-create

INTEGER

off(0),

on(1)

Status of the service policy

As per the MIB.

hh3cDot11SSIDHiddenCM (1.3.6.1.4.1.25506.2.75.4.2.2.1.26)

read-create

Hh3cDot11TruthValueCM

dot11false(0),

dot11true(1)

This attribute controls whether the SSID is published in the beacon frame. If it is dot11true, the SSID will not be published in the beacon frame

As per the MIB.

hh3cDot11SPIsolateCM (1.3.6.1.4.1.25506.2.75.4.2.2.1.27)

read-create

Hh3cDot11TruthValueCM

dot11false(0),

dot11true(1)

If dot11true, clients connected to this service policy are mutually isolated

As per the MIB.

hh3cDot11FwdVlanBitMapLow (1.3.6.1.4.1.25506.2.75.4.2.2.1.28)

read-create

OCTET STRING

OCTET STRING (0..256)

Each eight bits of this value represent a set of eight VLANs, with the first eight bits representing VLAN 1 to 8, the second eight bits representing VLAN 9 to 16, and so on. In each eight bits, the highest bit represents the highest numbered VLAN, and the lowest bit represents the lowest numbered VLAN. Therefore, each untagged VLAN on a hybrid port uses one bit of this node value. If the value of the bit is "1", the VLAN is untagged in the VLAN set; if the value of the VLAN bit is "0", the VLAN is not untagged

As per the MIB.

hh3cDot11FwdVlanBitMapHigh (1.3.6.1.4.1.25506.2.75.4.2.2.1.29)

read-create

OCTET STRING

OCTET STRING (0..256)

Each byte in this value specifies a group of eight VLANs, with the first byte specifying VLAN 1 to 8, the second byte specifying VLAN 9 to 16, and so on.

In each eight bits, the highest bit represents the highest numbered VLAN, and the lowest bit represents the lowest numbered VLAN. Therefore, each untagged VLAN on a hybrid port uses one bit of this node value. If the value of the bit is "1", the VLAN is untagged in the VLAN set; if the value of the VLAN bit is "0", the VLAN is not untagged

As per the MIB.

hh3cDot11ServicePolicyName (1.3.6.1.4.1.25506.2.75.4.2.2.1.30)

read-create

OCTET STRING

Standard MIB values.

Name of each service policy

As per the MIB.

hh3cDot11SecurityModeCM (1.3.6.1.4.1.25506.2.75.4.2.2.1.31)

read-write

INTEGER

none(0),

psk(1),

radius(2),

wlanex(3)

Determine the security mode of the WLAN port.

As per the MIB.

hh3cDot11SPInCbsValue (1.3.6.1.4.1.25506.2.75.4.2.2.1.32)

read-create

Integer32

Standard MIB values.

CBS in the inbound direction of this service policy. When this value is 0, CBS is automatically calculated based on CIR

As per the MIB.

hh3cDot11SPOutCbsValue (1.3.6.1.4.1.25506.2.75.4.2.2.1.33)

read-create

Integer32

Standard MIB values.

CBS in the outbound direction of this service policy. When this value is 0, CBS is automatically calculated based on CIR

As per the MIB.

hh3cDot11WlanInfCustomerPVID (1.3.6.1.4.1.25506.2.75.4.2.2.1.34)

read-create

Integer32

Standard MIB values.

Customer PVID

As per the MIB.

(Only supported by Comware 7-based products)

Object (OID)

Access

Syntax

Value range

Description

Implementation

hh3cDot11ServicePolicyExtID (1.3.6.1.4.1.25506.2.75.4.2.3.1.1)

not-accessible

Hh3cDot11ServicePolicyIDType

Standard MIB values.

Service policy ID

As per the MIB.

hh3cDot11SecIEStatus (1.3.6.1.4.1.25506.2.75.4.2.3.1.2)

read-create

Hh3cDot11SecIEStatusType

none(1),

rsn(2),

wpa(3),

all(4),

ext(5)

Enables the security information elements in the beacons and probe response frames sent by the AP

As per the MIB.

hh3cDot11SecurityCiphers (1.3.6.1.4.1.25506.2.75.4.2.3.1.3)

read-create

Integer32

Standard MIB values.

WLAN system Supported encryption methods for encrypting data frames.

As per the MIB.

hh3cDot11CipherKeyIndex (1.3.6.1.4.1.25506.2.75.4.2.3.1.4)

read-create

Integer32

Standard MIB values.

The key index of the password key for the data packet. Configuration takes effect when the value of hh3cDot11SecurityCiphers is wep40 or wep104.

As per the MIB.

hh3cDot11CipherKey (1.3.6.1.4.1.25506.2.75.4.2.3.1.5)

read-create

OCTET STRING

Standard MIB values.

The encryption key for the data packet. Configuration takes effect when the value of hh3cDot11SecurityCiphers is wep40 or wep104.

As per the MIB.

hh3cDot11SrvPolicyExtRowStatus (1.3.6.1.4.1.25506.2.75.4.2.3.1.6)

read-create

RowStatus

active(1),

notInService(2),

notReady(3),

createAndGo(4),

createAndWait(5),

destroy(6)

Entry state.

As per the MIB.

hh3cDot11CipherKeyType (1.3.6.1.4.1.25506.2.75.4.2.3.1.7)

read-create

INTEGER

char(1),

hex(2)

The password key type of hh3cDot11CipherKey

As per the MIB.

hh3cDot11AkmMode (1.3.6.1.4.1.25506.2.75.4.2.3.1.8)

read-create

INTEGER

none(0),

dot1x(1),

psk(2)

Authentication and key management methods

As per the MIB.

hh3cDot11PskKey (1.3.6.1.4.1.25506.2.75.4.2.3.1.9)

read-create

OCTET STRING

Standard MIB values.

Pre-shared key. Takes effect when the value of "hh3cDot11AkmMode" is "psk"

As per the MIB.

Object (OID)

Access

Syntax

Value range

Description

Implementation

hh3cDot11RPAPSerialID (1.3.6.1.4.1.25506.2.75.4.2.4.1.1)

not-accessible

OCTET STRING

OCTET STRING(0..127)

Serial number of the AP.

As per the MIB.

hh3cDot11RPRadioID (1.3.6.1.4.1.25506.2.75.4.2.4.1.2)

not-accessible

Hh3cDot11RadioScopeType

Integer32

Standard MIB values.

Radio ID.

As per the MIB.

hh3cDot11RPBeaconInterval (1.3.6.1.4.1.25506.2.75.4.2.4.1.3)

read-write

Integer32

Standard MIB values.

Interval of beacon management frames for this AP radio

As per the MIB.

hh3cDot11RPDtimInterval (1.3.6.1.4.1.25506.2.75.4.2.4.1.4)

read-write

Integer32

Standard MIB values.

Number of beacon intervals the AP radio beacon transmission should occur as indicated in the TIM with DTIM count field set to 0. This value is transmitted in the DTIM period field of the beacon frame.

As per the MIB.

(Only supported by Comware 7-based products)

hh3cDot11RPRtsThreshold (1.3.6.1.4.1.25506.2.75.4.2.4.1.5)

read-write

Integer32

Standard MIB values.

The current minimum size (in bytes) of MAC protocol data units (MPDUs) for this AP radio, below which the request to send/clear to send (RTS/CTS) handshake will not be executed

As per the MIB.

hh3cDot11RPFragThreshold (1.3.6.1.4.1.25506.2.75.4.2.4.1.6)

read-write

Integer32

Standard MIB values.

The minimum size (in bytes) of MPDUs that can be transmitted to the PHY for this AP radio. If the size of the MSDU exceeds this value after adding MAC header and trailer, the MSDU should be fragmented

As per the MIB.

hh3cDot11RPShortRetryThreshold (1.3.6.1.4.1.25506.2.75.4.2.4.1.7)

read-write

Integer32

Standard MIB values.

The maximum number of attempts for frames with a transmission length less than or equal to hh3cDot11RTSThreshold on this AP radio before indicating a failure condition

As per the MIB.

hh3cDot11RPLongRetryThreshold (1.3.6.1.4.1.25506.2.75.4.2.4.1.8)

read-write

Integer32

Standard MIB values.

The maximum number of attempts for frames with a transmission length greater than hh3cDot11RTSThreshold on this AP radio before indicating a failure condition

As per the MIB.

hh3cDot11RPClientMaxCount (1.3.6.1.4.1.25506.2.75.4.2.4.1.9)

read-write

Integer32

Integer32(0..2147483647)

The maximum number of supported radio policies for this AP radio

As per the MIB.

hh3cDot11RPBeaconIntervalCM (1.3.6.1.4.1.25506.2.75.4.2.4.1.10)

read-write

Integer32

Standard MIB values.

The interval of beacons for this AP radio

As per the MIB.

Object (OID)

Access

Syntax

Value range

Description

Implementation

hh3cDot11SecurityServicePolicyID (1.3.6.1.4.1.25506.2.75.4.2.5.1.1)

not-accessible

Hh3cDot11ServicePolicyIDType

Standard MIB values.

ID of each service policy

As per the MIB.

(Only supported by Comware 9-based products)

Object (OID)

Access

Syntax

Value range

Description

Implementation

hh3cDot11SPEnable (1.3.6.1.4.1.25506.2.75.4.2.6.1.1)

read-write

INTEGER

enable(1),

disable(2)

Whether the service policy is enabled

As per the MIB.

Object (OID)

Access

Syntax

Value range

Description

Implementation

hh3cDot11SrvL2AuthenID (1.3.6.1.4.1.25506.2.75.4.2.7.1.1)

not-accessible

Hh3cDot11ServicePolicyIDType

Standard MIB values.

Service template ID.

As per the MIB.

hh3cDot11L2AuthenMode (1.3.6.1.4.1.25506.2.75.4.2.7.1.2)

read-write

INTEGER

bypass(1),

macAuthentication(2),

macThenDot1xAuthentication(3),

dot1xAuthentication(4),

dot1xThenMacAuthentication(5),

ouiThenDot1x(6),

macAndDot1x(7)

Service template authentication method.

As per the MIB.

hh3cDot11L2IntrusProtectEnable (1.3.6.1.4.1.25506.2.75.4.2.7.1.3)

read-write

TruthValue

true(1),

false(2)

Enabling status of the intrusion prevention feature for the service template.

As per the MIB.

(Only supported by Comware 7-based products)

hh3cDot11L2IntrusProtectOpt (1.3.6.1.4.1.25506.2.75.4.2.7.1.4)

read-write

INTEGER

blockMACTemporarily(1),

stopServiceTemporarily(2),

stopService(3)

Action to take upon intrusion detection.

As per the MIB.

(Only supported by Comware 7-based products)

hh3cDot11TempServiceStopTimer (1.3.6.1.4.1.25506.2.75.4.2.7.1.5)

read-write

Integer32

Integer32 (10..300)

Duration of service suspension.

As per the MIB.

(Only supported by Comware 7-based products)

hh3cDot11TempBlockMACTimer (1.3.6.1.4.1.25506.2.75.4.2.7.1.6)

read-write

Integer32

Integer32 (60..300)

Duration of user MAC address blockout.

As per the MIB.

(Only supported by Comware 7-based products)

hh3cDot11L2IgnoreAuthorization (1.3.6.1.4.1.25506.2.75.4.2.7.1.7)

read-write

TruthValue

true(1),

false(2)

Ignore all authorization information set on the server

As per the MIB.

hh3cDot11L2FailVLAN (1.3.6.1.4.1.25506.2.75.4.2.7.1.8)

read-write

Integer32

Integer32(0..4094)

VLAN authentication failed. 0 indicates not configured

As per the MIB.

hh3cDot11L2CriticalVLAN (1.3.6.1.4.1.25506.2.75.4.2.7.1.9)

read-write

Integer32

Integer32(0..4094)

VLAN for server unavailable. 0 indicates not configured

As per the MIB.

hh3cDot11L2AuthorFailOffline (1.3.6.1.4.1.25506.2.75.4.2.7.1.10)

read-write

TruthValue

true(1),

false(2)

User will be logged out if authorization fails

As per the MIB.

hh3cDot11L2AccountFailOffline (1.3.6.1.4.1.25506.2.75.4.2.7.1.11)

read-write

TruthValue

true(1),

false(2)

User will be logged out if accounting fails

As per the MIB.

(Only supported by Comware 7-based products)

hh3cDot11Dot1xHSEnable (1.3.6.1.4.1.25506.2.75.4.2.7.1.12)

read-write

TruthValue

true(1),

false(2)

Enable 802.1X handshake function

As per the MIB.

hh3cDot11Dot1xSecureHSEnable (1.3.6.1.4.1.25506.2.75.4.2.7.1.13)

read-write

TruthValue

true(1),

false(2)

Enable secure 802.1X handshake

As per the MIB.

hh3cDot11Dot1xReauthenEnable (1.3.6.1.4.1.25506.2.75.4.2.7.1.14)

read-write

TruthValue

true(1),

false(2)

Enable 802.1X reauthentication

As per the MIB.

hh3cDot11Dot1xMandatoryDomain (1.3.6.1.4.1.25506.2.75.4.2.7.1.15)

read-write

OCTET STRING

Standard MIB values.

User's 802.1X authentication domain

As per the MIB.

hh3cDot11Dot1xMaxUserCount ()

read-write

Integer32

Standard MIB values.

Maximum 802.1X users supported by BSSSupported bound to business template

As per the MIB.

hh3cDot11MACAuthenDomain (1.3.6.1.4.1.25506.2.75.4.2.7.1.17)

read-write

OCTET STRING

Standard MIB values.

MAC authentication domain for users in service template

As per the MIB.

hh3cDot11MACAuthenMaxUserCount (1.3.6.1.4.1.25506.2.75.4.2.7.1.18)

read-write

Integer32

Standard MIB values.

Maximum MAC authentication users supported by BSS bound to this service template

As per the MIB.

Object (OID)

Access

Syntax

Value range

Description

Implementation

hh3cDot11APTemplateName (1.3.6.1.4.1.25506.2.75.4.3.1.1.1)

not-accessible

OCTET STRING

OCTET STRING (0..127)

AP template name.

As per the MIB.

hh3cDot11APSerialID (1.3.6.1.4.1.25506.2.75.4.3.1.1.2)

read-create

OCTET STRING

Standard MIB values.

Serial number of the AP.

As per the MIB.

hh3cDot11TemplateAPModelAlias (1.3.6.1.4.1.25506.2.75.4.3.1.1.3)

read-create

OCTET STRING

Standard MIB values.

AP model name.

As per the MIB.

hh3cDot11Description (1.3.6.1.4.1.25506.2.75.4.3.1.1.4)

read-create

OCTET STRING

Standard MIB values.

Detailed information about AP, administrators can record the location, owner, or other information of the AP. If this value is set to empty, the description information will be removed.

As per the MIB.

hh3cDot11APWorkMode (1.3.6.1.4.1.25506.2.75.4.3.1.1.5)

read-create

INTEGER

normal(1)

monitor(2)

hybrid(3)

AP operating mode.

normal: provides wireless service

monitor: monitors and detects attacks

hybrid: provides wireless service and detects attacks

As per the MIB.

hh3cDot11APTemplateRowStatus (1.3.6.1.4.1.25506.2.75.4.3.1.1.6)

read-create

RowStatus

INTEGER {

active(1),

notInService(2),

notReady(3),

createAndGo(4),

createAndWait(5),

destroy(6)

}

AP template line status

As per the MIB.

hh3cDot11APName

(1.3.6.1.4.1.25506.2.75.4.3.1.1.7)

read-create

OCTET STRING

Standard MIB values.

AP name.

As per the MIB.

hh3cDot11StatisInterv

(1.3.6.1.4.1.25506.2.75.4.3.1.1.8)

read-create

Integer32

Standard MIB values.

Radio frequency statistics time interval

As per the MIB.

hh3cDot11APBroadcastProbeReply

(1.3.6.1.4.1.25506.2.75.4.3.1.1.9)

read-create

TruthValue

true(1),

false(2)

Whether the AP enables response to broadcast probe messages

As per the MIB.

hh3cDot11StaIdleTimerInterv (1.3.6.1.4.1.25506.2.75.4.3.1.1.10)

read-create

Integer32

Standard MIB values.

Idle link time interval between AP and STA (power saving or wake-up)

As per the MIB.

hh3cDot11StaKeepAliveTimerInterv (1.3.6.1.4.1.25506.2.75.4.3.1.1.11)

read-create

Integer32

Standard MIB values.

Link keep-alive time interval between AP and STA, in seconds

As per the MIB.

hh3cDot11APCir (1.3.6.1.4.1.25506.2.75.4.3.1.1.12)

read-create

Integer32

Standard MIB values.

CIR between the AP and AC.

As per the MIB.

Only supported by by Comware 7-based products.

hh3cDot11APCbs (1.3.6.1.4.1.25506.2.75.4.3.1.1.13)

read-create

Integer32

Standard MIB values.

CBS between the AP and AC.

As per the MIB.

Only supported by by Comware 7-based products.

hh3cDot11APPriorityLevel (1.3.6.1.4.1.25506.2.75.4.3.1.1.14)

read-create

Integer32

Integer32(0..7)

Priority of AP connection. The default value is 4

As per the MIB.

hh3cDot11APElementID (1.3.6.1.4.1.25506.2.75.4.3.1.1.15)

read-only

Integer32

Standard MIB values.

AP ID.

As per the MIB.

hh3cDot11APDevDetectEnable (1.3.6.1.4.1.25506.2.75.4.3.1.1.16)

read-create

TruthValue

true(1),

false(2)

Whether to enable device detection. With this feature enabled, the AP will provide wireless services and device detection at the same time

As per the MIB.

Only supported by by Comware 7-based products.

hh3cDot11APGetIPMethod (1.3.6.1.4.1.25506.2.75.4.3.1.1.17)

read-create

INTEGER

dhcpAlloc(1)

static(2)

Method for obtaining the IP address of AP.

As per the MIB.

hh3cDot11StatisIntervMode (1.3.6.1.4.1.25506.2.75.4.3.1.1.18)

read-create

INTEGER

normal(1)

realtime(2)

Statistics interval method.

normal: statistics interval between 10s - 240s

realtime: statistics interval between 0s - 5s

As per the MIB.

hh3cDot11ApTrapEnabled

(1.3.6.1.4.1.25506.2.75.4.3.1.1.19)

read-create

TruthValue

true(1),

false(2)

Whether alarm is enabled

As per the MIB.

hh3cDot11ApFmwUpdState (1.3.6.1.4.1.25506.2.75.4.3.1.1.20)

read-create

INTEGER

enable(1)

disable(2)

inherit(3)

AP version auto-upgrade switch status.

enable: auto-upgrade enabled

disable: auto-upgrade not enabled

inherit: inherit group configuration

As per the MIB.

hh3cDot11StatisIntervModeCM (1.3.6.1.4.1.25506.2.75.4.3.1.1.21)

read-create

INTEGER

off(0)

on(1)

Statistics information interval status

off: statistics interval between 10s - 240s

on: statistics interval between 0s - 5s

As per the MIB.

hh3cDot11ApNasIDCM (1.3.6.1.4.1.25506.2.75.4.3.1.1.22)

read-create

OCTET STRING

Standard MIB values.

NAS-ID for the current service policy of each specified radio frequency of AP

As per the MIB.

hh3cDot11ApCoveragetype (1.3.6.1.4.1.25506.2.75.4.3.1.1.23)

read-create

INTEGER

school(1)

traffic(2)

shopping(3)

company(4)

AP coverage type.

school: school

traffic: traffic

shopping: shopping mall

company: office place

As per the MIB.

hh3cDot11APControlAddressState (1.3.6.1.4.1.25506.2.75.4.3.1.1.24)

read-create

INTEGER

enable(1)

disable(2)

Enabling status of AC rediscovery.

As per the MIB.

This table is supported only by Comware 7-based products and is not supported by Comware 9-based products.

hh3cDot11APControlAddressIPv4 (1.3.6.1.4.1.25506.2.75.4.3.1.1.25)

read-write

IpAddress

Standard MIB values.

AC IP address for AC rediscovery.

As per the MIB.

This table is supported only by Comware 7-based products and is not supported by Comware 9-based products.

hh3cDot11APControlAddressIPv6 (1.3.6.1.4.1.25506.2.75.4.3.1.1.26)

read-create

OCTET STRING

Standard MIB values.

AC IPv6 address for AC rediscovery.

As per the MIB.

This table is supported only by Comware 7-based products and is not supported by Comware 9-based products.

hh3cDot11APLocalACName (1.3.6.1.4.1.25506.2.75.4.3.1.1.27)

read-only

OCTET STRING

Standard MIB values.

Name of the local AC that manages the AP.

As per the MIB.

This table is supported only by Comware 7-based products and is not supported by Comware 9-based products.

hh3cDot11APEchoInterval (1.3.6.1.4.1.25506.2.75.4.3.1.1.28)

read-create

Integer32

Standard MIB values.

AP keep-alive time interval

As per the MIB.

hh3cDot11APProvisionAPIPv4 (1.3.6.1.4.1.25506.2.75.4.3.1.1.29)

read-write

IpAddress

Standard MIB values.

Preprovisioned AP IPv4 address.

As per the MIB.

Only supported by Comware 7-based products.

hh3cDot11APProvisionIPv4Mask

(1.3.6.1.4.1.25506.2.75.4.3.1.1.30)

read-create

Integer32

Integer32(1..31)

Mask of the preprovisioned AP IPv4 address.

As per the MIB.

Only supported by Comware 7-based products.

hh3cDot11APProvisionAPIPv6 (1.3.6.1.4.1.25506.2.75.4.3.1.1.31)

read-create

OCTET STRING

Standard MIB values.

Preprovisioned AP IPv6 address.

As per the MIB.

Only supported by Comware 7-based products.

hh3cDot11APProvisionIPv6PrefixLen (1.3.6.1.4.1.25506.2.75.4.3.1.1.32)

read-create

Integer32

Integer32(1..128)

Prefix length of the preprovisioned AP IPv6 address.

As per the MIB.

Only supported by Comware 7-based products.

hh3cDot11APProvisionACIPv4 (1.3.6.1.4.1.25506.2.75.4.3.1.1.33)

read-write

IpAddress

Standard MIB values.

Preprovisioned AC IPv4 address.

As per the MIB.

Only supported by Comware 7-based products.

hh3cDot11APProvisionACIpv6 (1.3.6.1.4.1.25506.2.75.4.3.1.1.34)

read-create

OCTET STRING

Standard MIB values.

Preprovisioned AC IPv6 address.

As per the MIB.

Only supported by Comware 7-based products.

hh3cDot11APProvisionGateWayIPV4 (1.3.6.1.4.1.25506.2.75.4.3.1.1.35)

read-write

IpAddress

Standard MIB values.

Preprovisioned gateway IPv4 address.

As per the MIB.

Only supported by Comware 7-based products.

hh3cDot11APProvisionGateWayIPV6 (1.3.6.1.4.1.25506.2.75.4.3.1.1.36)

read-create

OCTET STRING

Standard MIB values.

Preprovisioned gateway IPv6 address.

As per the MIB.

Only supported by Comware 7-based products.

hh3cDot11APMapConfigFileName (1.3.6.1.4.1.25506.2.75.4.3.1.1.37)

read-create

OCTET STRING

Standard MIB values.

MapConfig configuration file name

As per the MIB.

Object (OID)

Access

Syntax

Value range

Description

Implementation

hh3cDot11APTemplateNameCfg (1.3.6.1.4.1.25506.2.75.4.3.2.1.1)

not-accessible

OCTET STRING

OCTET STRING (0..127)

AP template name

As per the MIB.

hh3cDot11CfgRadioID (1.3.6.1.4.1.25506.2.75.4.3.2.1.2)

not-accessible

Hh3cDot11RadioScopeType

Integer32

Standard MIB values.

Radio ID.

As per the MIB.

hh3cDot11CfgRadioPolicyName (1.3.6.1.4.1.25506.2.75.4.3.2.1.3)

read-write

OCTET STRING

Standard MIB values.

The name of the radio policy of this AP

As per the MIB.

hh3cDot11CfgRadioType (1.3.6.1.4.1.25506.2.75.4.3.2.1.4)

read-write

Hh3cDot11RadioType

dot11a(1),

dot11b(2),

dot11g(4),

dot11n(8),

dot11gn(16),

dot11an(32),

dot11ac(64),

dot11gac(128),

dot11ax(256),

dot11gax(512)

The 802.11 radio type used by this AP

As per the MIB.

hh3cDot11CfgChannel (1.3.6.1.4.1.25506.2.75.4.3.2.1.5)

read-write

Hh3cDot11ChannelScopeType

Integer32

Standard MIB values.

The channel allocated for this AP's radio

As per the MIB.

hh3cDot11CfgMaxTxPowerLevel (1.3.6.1.4.1.25506.2.75.4.3.2.1.6)

read-write

Hh3cDot11TxPwrLevelScopeType

Integer32

Standard MIB values.

The maximum transmission power range of this AP's radio

As per the MIB.

hh3cDot11PreambleLen (1.3.6.1.4.1.25506.2.75.4.3.2.1.7)

read-write

Hh3cDot11PreambleType

long (1),

short (2)

The short preamble type (long/short) used by this AP's radio for 802.11 MAC frames. When hh3cDot11CfgRadioType is dot11b, dot11g, or dot11gn, the value of hh3cDot11PreambleLen will be effective. Otherwise, its value will be invalid.

As per the MIB.

hh3cDot11CfgRadioStatus (1.3.6.1.4.1.25506.2.75.4.3.2.1.8)

read-write

TruthValue

true(1),

false(2)

The management status (ON/OFF) of this AP's radio

As per the MIB.

hh3cDot11CfgRdElementID (1.3.6.1.4.1.25506.2.75.4.3.2.1.9)

read-only

Unsigned32

Standard MIB values.

The element ID of this AP's radio, which includes two parts, the highest 24 bits are APID, and the lowest 8 bits are radio ID

As per the MIB.

hh3cDot11CfgWorkMode (1.3.6.1.4.1.25506.2.75.4.3.2.1.10)

read-write

Hh3cDot11WorkMode

normal (1),

monitor (2),

hybrid (3)

The operating mode of this AP's radio

As per the MIB.

hh3cDot11CfgPwrAttValue (1.3.6.1.4.1.25506.2.75.4.3.2.1.11)

read-write

Integer32

Standard MIB values.

The power attenuation value of this AP's radio

As per the MIB.

hh3cDot11RadioTxArithmetic (1.3.6.1.4.1.25506.2.75.4.3.2.1.12)

read-write

INTEGER

quality(1),

bandwidth(2)

The transmission algorithm of this AP's radio, supported values are:

quality - prioritize quality during transmission

bandwidth - prioritize bandwidth during transmission

As per the MIB.

hh3cDot11CfgChannelLockStat (1.3.6.1.4.1.25506.2.75.4.3.2.1.13)

read-write

INTEGER

unlocked (1),

locked (2)

The lockout status of this AP's radio channel

As per the MIB.

hh3cDot11CfgPowerLockStat (1.3.6.1.4.1.25506.2.75.4.3.2.1.14)

read-write

INTEGER

unlocked (1),

locked (2)

The lockout status of this AP's radio power consumption

As per the MIB.

hh3cDot11CfgLBRdGroupId (1.3.6.1.4.1.25506.2.75.4.3.2.1.15)

read- write

Unsigned32

Standard MIB values.

The load balancing group ID assigned for this AP's radio

As per the MIB.

hh3cDot11CfgRRMSDRdGroupId (1.3.6.1.4.1.25506.2.75.4.3.2.1.16)

read- write

Unsigned32

Standard MIB values.

The RRN autonomous group ID assigned for this AP's radio

As per the MIB.

hh3cDot11CfgRadioType2 (1.3.6.1.4.1.25506.2.75.4.3.2.1.17)

read-write

Hh3cDot11RadioType2

dot11a(1),

dot11b(2),

dot11g(4),

dot11an(8),

dot11gn(16),

dot11ac(32),

dot11gac(64),

dot11ax(128),

dot11gax(256)

The 802.11 radio type used by this AP's radio

As per the MIB.

hh3cDot11CfgIDSEnable (1.3.6.1.4.1.25506.2.75.4.3.2.1.18)

read-write

TruthValue

true(1),

false(2)

Whether intrusion detection is enabled for this AP's radio

As per the MIB.

hh3cDot11CfgSaEnable

(1.3.6.1.4.1.25506.2.75.4.3.2.1.19)

read-write

TruthValue

true(1),

false(2)

Whether frequency spectrum analysis is enabled

As per the MIB.

hh3cDot11CfgSaCltRtFFTData

(1.3.6.1.4.1.25506.2.75.4.3.2.1.20)

read-write

TruthValue

true(1),

false(2)

Whether real-time FFT data is collected

As per the MIB.

hh3cDot11CfgSaBand

(1.3.6.1.4.1.25506.2.75.4.3.2.1.21)

read-write

INTEGER

dot11g(1), dot11aLower(2), dot11aMiddle(3), dot11aUpper(4)

The channel used for real-time FFT data collection

As per the MIB.

hh3cDot11CfgSaRptDevType

(1.3.6.1.4.1.25506.2.75.4.3.2.1.22)

read-write

BITS

microwave(0), microwaveInverter(1),

 bluetooth(2), fixedFreqOthers(3), fixedFreqCordlessPhone(4), fixedFreqVideo(5),

fixedFreqAudio(6),

freqHopperOthers(7), freqHopperCordlessBase(8), freqHopperCordlessNetwork(9), freqHopperXbox(10), genericInterferer(11),

freqHopperCordlessNetwork5g(12)

The reported device type

As per the MIB.

hh3cDot11CfgSaTrapDevEnable

(1.3.6.1.4.1.25506.2.75.4.3.2.1.23)

read-write

TruthValue

true(1),

false(2)

Whether ONtrap is enabled

As per the MIB.

hh3cDot11CfgSaTrapDevType

(1.3.6.1.4.1.25506.2.75.4.3.2.1.24)

read-write

BITS

microwave(0), microwaveInverter(1),

 bluetooth(2), fixedFreqOthers(3), fixedFreqCordlessPhone(4), fixedFreqVideo(5),

fixedFreqAudio(6),

freqHopperOthers(7), freqHopperCordlessBase(8), freqHopperCordlessNetwork(9), freqHopperXbox(10), genericInterferer(11),

freqHopperCordlessNetwork5g(12)

The device type for ONtrap

As per the MIB.

hh3cDot11CfgSaTrapAQEnable

(1.3.6.1.4.1.25506.2.75.4.3.2.1.25)

read-write

TruthValue

true(1),

false(2)

Whether ON channel quality trap is enabled

As per the MIB.

hh3cDot11CfgSaTrapAQThreshold

(1.3.6.1.4.1.25506.2.75.4.3.2.1.26)

read-write

Integer32

Integer32(1..100)

The channel quality threshold

As per the MIB.

hh3cDot11CfgSaDrivenRRMEnable

(1.3.6.1.4.1.25506.2.75.4.3.2.1.27)

read-write

TruthValue

true(1),

false(2)

Whether RRM is enabled when the AP detects a certain level of interference

As per the MIB.

hh3cDot11CfgSaDrivenRRMSnt

(1.3.6.1.4.1.25506.2.75.4.3.2.1.28)

read-write

INTEGER

low(1),

medium(2),

high(3)

The threshold to trigger RRM

As per the MIB.

hh3cDot11CfgSPInCirMode (1.3.6.1.4.1.25506.2.75.4.3.2.1.29)

read-create

Hh3cDot11CirMode

static(1),

dynamic(2)

The committed information rate (CIR) mode specified for the inbound direction of this AP's radio. This object is only useful if the corresponding CIR has a non-zero value. If the value of this object is changed, the corresponding CIL will be reset

As per the MIB.

hh3cDot11CfgSPInCirValue (1.3.6.1.4.1.25506.2.75.4.3.2.1.30)

read- create

Integer32

Standard MIB values.

The CIR mode for the inbound direction of the service policy for this AP's radio. If the value is 0, flow control is not applied to the service policy, and the corresponding CIR mode is meaningless

As per the MIB.

hh3cDot11CfgSPOutCirMode (1.3.6.1.4.1.25506.2.75.4.3.2.1.31)

read-create

Hh3cDot11CirMode

static(1),

dynamic(2)

The committed information rate (CIR) mode specified for the outbound direction of this AP's radio. This object is only useful if the corresponding CIR has a non-zero value. If the value of this object is changed, the corresponding CIL will be reset

As per the MIB.

hh3cDot11CfgSPOutCirValue (1.3.6.1.4.1.25506.2.75.4.3.2.1.32)

read- create

Integer32

Standard MIB values.

The CIR mode for the outbound direction of the service policy for this AP's radio. If the value is 0, flow control is not applied to the service policy, and the corresponding CIR mode is meaningless

As per the MIB.

Object (OID)

Access

Syntax

Value range

Description

Implementation

hh3cDot11CfgServicePolicyID (1.3.6.1.4.1.25506.2.75.4.3.3.1.1)

not-accessible

Hh3cDot11ServicePolicyIDType

Standard MIB values.

ID of each service policy used by AP

As per the MIB.

hh3cDot11SrvSetRowStatus (1.3.6.1.4.1.25506.2.75.4.3.3.1.2)

read-create

RowStatus

active(1),

notInService(2),

notReady(3),

createAndGo(4),

createAndWait(5),

destroy(6)

Entry state.

As per the MIB.

hh3cDot11ServiceSetVlanId (1.3.6.1.4.1.25506.2.75.4.3.3.1.3)

read-create

Integer32

Integer32(0..4094)

Vlan ID of BSS generated when business policy is bound to Radio

As per the MIB.

hh3cDot11ServiceSetVlanGroup (1.3.6.1.4.1.25506.2.75.4.3.3.1.4)

read-create

OCTET STRING

OCTET STRING (0..31)

VLAN group of BSS generated when business policy is bound to radio frequency (RF)

As per the MIB.

Object (OID)

Access

Syntax

Value range

Description

Implementation

hh3cDot11APSysNetID (1.3.6.1.4.1.25506.2.75.4.3.4.1.1)

read-write

OCTET STRING

OCTET STRING(0..127)

The system network ID of this AP

As per the MIB.

hh3cDot11APCpuUsageThreshold (1.3.6.1.4.1.25506.2.75.4.3.4.1.2)

read-write

Integer32

Integer32(0..100)

The CPU usage threshold of this AP

As per the MIB.

hh3cDot11APMemUsageThreshold (1.3.6.1.4.1.25506.2.75.4.3.4.1.3)

read-write

Integer32

Integer32(0..100)

The memory usage threshold of this AP

As per the MIB.

Object (OID)

Access

Syntax

Value range

Description

Implementation

hh3cDot11APSsidNumLimit (1.3.6.1.4.1.25506.2.75.4.3.5.1.1)

read-write

Integer32

Integer32(0..65535)

The upper limit of the service template bound to this AP, with all APs sharing this upper limit for radio frequency. Default value 0: no upper limit for the service template bound to this AP

As per the MIB.

hh3cDot11APUserCntLimit (1.3.6.1.4.1.25506.2.75.4.3.5.1.2)

read-write

Integer32

Integer32(0..65535)

The upper limit of users accessing this AP, with all BSSs bound to the AP sharing this upper limit. Default value 0: no upper limit for users accessing this AP

As per the MIB.

hh3cDot11APUserThreshold (1.3.6.1.4.1.25506.2.75.4.3.5.1.3)

read-write

Integer32

Integer32(0..65535)

The user threshold for accessing this AP, with all BSSs bound to the AP sharing this threshold. If the user counter overflows, an alarm will be sent. Default value 0: no user threshold for accessing this AP

As per the MIB.

Object (OID)

Access

Syntax

Value range

Description

Implementation

hh3cDot11APSetIfIndex (1.3.6.1.4.1.25506.2.75.4.3.6.1.1)

not-accessible

Integer32

Standard MIB values.

Index of this AP interface

As per the MIB.

hh3cDot11APIfAlias (1.3.6.1.4.1.25506.2.75.4.3.6.1.2)

read-write

DisplayString

OCTET STRING

Standard MIB values.

Alias of the interface specified by this AP

As per the MIB.

Object (OID)

Access

Syntax

Value range

Description

Implementation

hh3cDot11RCAPSerialID (1.3.6.1.4.1.25506.2.75.4.3.8.1.1)

not-accessible

OCTET STRING

OCTET STRING(0..127)

Serial number of the AP.

As per the MIB.

hh3cDot11RCRadioID (1.3.6.1.4.1.25506.2.75.4.3.8.1.2)

not-accessible

Hh3cDot11RadioScopeType

Integer32

Standard MIB values.

Radio ID.

As per the MIB.

hh3cDot11RCRadioType (1.3.6.1.4.1.25506.2.75.4.3.8.1.3)

read-write

Hh3cDot11RadioType

dot11a(1),

dot11b(2),

dot11g(4),

dot11n(8),

dot11gn(16),

dot11an(32),

dot11ac(64),

dot11gac(128),

dot11ax(256),

dot11gax(512)

The radio frequency type used by this AP

As per the MIB.

hh3cDot11RCChannel (1.3.6.1.4.1.25506.2.75.4.3.8.1.4)

read-write

Hh3cDot11ChannelScopeType

Integer32

Standard MIB values.

The channel allocated for this AP's radio frequency

As per the MIB.

hh3cDot11RCPreambleLen (1.3.6.1.4.1.25506.2.75.4.3.8.1.5)

read-write

Hh3cDot11PreambleType

long (1),

short (2)

The short preamble type used by this AP's radio frequency for 802.11 MAC frames (long/short). When hh3cDot11CfgRadioType is dot11b, dot11g, or dot11gn, the value of hh3cDot11PreambleLen will be valid. Otherwise, its value will be invalid.

As per the MIB.

hh3cDot11RCPwrAttValue (1.3.6.1.4.1.25506.2.75.4.3.8.1.6)

read-write

Integer32

Standard MIB values.

The power attenuation value of this AP's radio frequency

As per the MIB.

hh3cDot11RCApPowerLevel (1.3.6.1.4.1.25506.2.75.4.3.8.1.7)

read-write

Hh3cDot11TxPwrLevelScopeType

Integer32

Standard MIB values.

The maximum transmission power range of this AP's radio frequency

As per the MIB.

hh3cDot11RCDynamicChlState (1.3.6.1.4.1.25506.2.75.4.3.8.1.8)

read-write

TruthValue

true(1),

false(2)

Enable/disable dynamic channel selection for this AP's radio frequency

As per the MIB.

hh3cDot11RCDynamicPowerState (1.3.6.1.4.1.25506.2.75.4.3.8.1.9)

read-write

TruthValue

true(1),

false(2)

Enable/disable dynamic power selection for this AP's radio frequency

As per the MIB.

hh3cDot11RCRadioStatus (1.3.6.1.4.1.25506.2.75.4.3.8.1.10)

read-write

TruthValue

true(1),

false(2)

Enable/disable radio frequency management status for this AP's radio frequency

As per the MIB.

hh3cDot11RCRadioRate (1.3.6.1.4.1.25506.2.75.4.3.8.1.11)

read-write

OCTET STRING

OCTET STRING(0..255)

The data transfer rate that can be set for this AP's radio frequency, in the format of 1, 2, 5.5... For 802.11n wireless radios, the format can be MCS X. The data transfer rate between AP and STA must comply with the configured rate. (Note: For 802.11n wireless radios, the first value will be considered as the mandatory rate, and the second value will be considered as the supported rate. If more than two rates are configured, the configuration will not take effect. If only one rate is configured, it will be considered as the mandatory rate by default.)

As per the MIB.

hh3cDot11RCPwrAdjustStepLength (1.3.6.1.4.1.25506.2.75.4.3.8.1.12)

read-only

Integer32

Standard MIB values.

The step size for power adjustment of this AP's radio frequency

As per the MIB.

hh3cDot11RCRadioType2 (1.3.6.1.4.1.25506.2.75.4.3.8.1.13)

read-write

Hh3cDot11RadioType2

dot11a(1),

dot11b(2),

dot11g(4),

dot11an(8),

dot11gn(16),

dot11ac(32),

dot11gac(64),

dot11ax(128),

dot11gax(256)

The radio frequency type used by this AP

As per the MIB.

hh3cDot11RCPreambleLenCM (1.3.6.1.4.1.25506.2.75.4.3.8.1.14)

read-write

INTEGER

long (1),

short (2)

The short preamble type used by this AP's radio frequency for 802.11 MAC frames (long/short). When hh3cDot11CfgRadioType is dot11b, dot11g, or dot11gn, the value of hh3cDot11PreambleLen will be valid. Otherwise, its value will be invalid.

As per the MIB.

hh3cDot11RCDynamicChlStateCM (1.3.6.1.4.1.25506.2.75.4.3.8.1.15)

read-write

INTEGER

off (0),

on (1)

Enable/disable dynamic channel selection for this AP's radio frequency

As per the MIB.

hh3cDot11RCRadioStatusCM (1.3.6.1.4.1.25506.2.75.4.3.8.1.16)

read-write

INTEGER

up (1),

down (2),

testing (3)

The radio frequency management status (enable/disable) for this AP's radio frequency

As per the MIB.

hh3cDot11RCRadioRateCM (1.3.6.1.4.1.25506.2.75.4.3.8.1.17)

read-write

OCTET STRING

OCTET STRING(0..255)

The data transfer rate that can be set for this AP's radio frequency, in the format of 1, 2, 5.5... For 802.11n wireless radios, the format can be MCS X. The data transfer rate between AP and STA must comply with the configured rate. (Note: For 802.11n wireless radios, the first value will be considered as the mandatory rate, and the second value will be considered as the supported rate. If more than two rates are configured, the configuration will not take effect. If only one rate is configured, it will be considered as the mandatory rate by default.)

As per the MIB.

hh3cDot11RCDynamicPowerStateCM (1.3.6.1.4.1.25506.2.75.4.3.8.1.18)

read-write

Hh3cDot11TruthValueCM

dot11false (0),

dot11true (1)

Enable/disable dynamic power selection for this AP's radio frequency band

As per the MIB.

hh3cDot11RCRssiThresholdCM (1.3.6.1.4.1.25506.2.75.4.3.8.1.19)

read-write

Integer32

Standard MIB values.

The minimum value of RSSI for this AP's radio frequency band, clients with RSSI lower than this value will be rejected for association.

As per the MIB.

hh3cDot11RCDynamicChlStateSelfDecisiveCM (1.3.6.1.4.1.25506.2.75.4.3.8.1.20)

read-write

Hh3cDot11TruthValueCM

dot11false (0),

dot11true (1)

Enable/disable automatic dynamic channel selection for this AP's radio frequency band

As per the MIB.

hh3cDot11RCDynamicPowerStateSelfDecisiveCM (1.3.6.1.4.1.25506.2.75.4.3.8.1.21)

read-write

Hh3cDot11TruthValueCM

dot11false (0),

dot11true (1)

Enable/disable automatic dynamic power selection for this AP's radio frequency band

As per the MIB.

Object (OID)

Access

Syntax

Value range

Description

Implementation

hh3cDot11APServiceVlanSerialID (1.3.6.1.4.1.25506.2.75.4.3.7.1.1)

not-accessible

OCTET STRING

Standard MIB values.

Serial number of the AP.

As per the MIB.

hh3cDot11APServiceVlanSPID (1.3.6.1.4.1.25506.2.75.4.3.7.1.2)

not-accessible

Hh3cDot11ServicePolicyIDType

Standard MIB values.

The ID of each service policy used by this node AP

As per the MIB.

hh3cDot11APServiceVlanId (1.3.6.1.4.1.25506.2.75.4.3.7.1.3)

read-create

Integer32

Integer32(0..4094)

The VLAN ID of the BSS generated when binding the business policy of this node with radio frequency (RF)

As per the MIB.

hh3cDot11APServiceVlanRowStatus (1.3.6.1.4.1.25506.2.75.4.3.7.1.4)

read-create

RowStatus

active(1),

notInService(2),

notReady(3),

createAndGo(4),

createAndWait(5),

destroy(6)

Entry state.

As per the MIB.

Object (OID)

Access

Syntax

Value range

Description

Implementation

hh3cDot11RadioSSIDSerialID (1.3.6.1.4.1.25506.2.75.4.3.9.1.1)

not-accessible

Hh3cDot11ObjectIDType

Hh3cDot11ObjectIDType(0..127)

Serial number of the AP.

As per the MIB.

hh3cDot11RadioSSIDRadioID (1.3.6.1.4.1.25506.2.75.4.3.9.1.2)

not-accessible

Hh3cDot11RadioScopeType

Standard MIB values.

This object represents each wireless radio frequency

As per the MIB.

hh3cDot11RadioSSIDWLANID (1.3.6.1.4.1.25506.2.75.4.3.9.1.3)

not-accessible

Integer32

Standard MIB values.

WLAN ID of the BSSID

As per the MIB.

hh3cDot11RadioSSIDIndex (1.3.6.1.4.1.25506.2.75.4.3.9.1.4)

read-create

Hh3cDot11ServicePolicyIDType

Standard MIB values.

The ID of each service policy used by this object's radio

As per the MIB.

hh3cDot11RadioBSSID (1.3.6.1.4.1.25506.2.75.4.3.9.1.5)

read-only

MacAddress

MacAddress(6)

As a MAC address format, used to identify the BSS

As per the MIB.

hh3cDot11RadioSSIDRowStatus (1.3.6.1.4.1.25506.2.75.4.3.9.1.6)

read-create

RowStatus

active(1),

notInService(2),

notReady(3),

createAndGo(4),

createAndWait(5),

destroy(6)

RowStatus.

As per the MIB.

Object (OID)

Access

Syntax

Value range

Description

Implementation

hh3cDot11SIDAPSerialID (1.3.6.1.4.1.25506.2.75.4.3.10.1.1)

not-accessible

OCTET STRING

Standard MIB values.

Serial number of the AP.

As per the MIB.

hh3cDot11SIDAPWorkMode (1.3.6.1.4.1.25506.2.75.4.3.10.1.2)

read-create

INTEGER

normal(1)

monitor(2)

hybrid(3)

AP working mode.

normal: provides wireless services

monitor: detects and probes attacks

hybrid: provides wireless services and detects attacks

As per the MIB.

hh3cDot11SIDAPGetIPMethod (1.3.6.1.4.1.25506.2.75.4.3.10.1.3)

read-create

INTEGER

dhcpAlloc(1)

static(2)

AP acquisition of IP address.

As per the MIB.

hh3cDot11SIDAPTemplateName (1.3.6.1.4.1.25506.2.75.4.3.10.1.4)

read-create

OCTET STRING

Standard MIB values.

AP template name.

As per the MIB.

hh3cDot11SIDModelAlias (1.3.6.1.4.1.25506.2.75.4.3.10.1.5)

read-create

OCTET STRING

Standard MIB values.

AP model name.

As per the MIB.

hh3cDot11SIDAPDescription (1.3.6.1.4.1.25506.2.75.4.3.10.1.6)

read-create

OCTET STRING

Standard MIB values.

Detailed information of the AP, administrators can record the AP's location, owner, or other information. If this value is set to empty, the description information will be removed.

As per the MIB.

hh3cDot11SIDRowStatus (1.3.6.1.4.1.25506.2.75.4.3.10.1.7)

read-create

RowStatus

INTEGER {

active(1),

notInService(2),

notReady(3),

createAndGo(4),

createAndWait(5),

destroy(6)

}

Serial number of the AP. Table row status

As per the MIB.

hh3cDot11SIDAPName (1.3.6.1.4.1.25506.2.75.4.3.10.1.8)

read-create

OCTET STRING

Standard MIB values.

AP name.

As per the MIB.

hh3cDot11SIDStatisInterv (1.3.6.1.4.1.25506.2.75.4.3.10.1.9)

read-create

Integer32

Standard MIB values.

Radio frequency statistics time interval

As per the MIB.

hh3cDot11SIDAPBroadcastProbeReply (1.3.6.1.4.1.25506.2.75.4.3.10.1.10)

read-create

TruthValue

true(1),

false(2)

Whether the AP enables responding to broadcast probe messages

As per the MIB.

hh3cDot11SIDAPStaIdleTimerInterv (1.3.6.1.4.1.25506.2.75.4.3.10.1.11)

read-create

Integer32

Standard MIB values.

Idle link interval between AP and STA (power saving or wake-up)

As per the MIB.

hh3cDot11SIDStaKeepAliveTimerInterv (1.3.6.1.4.1.25506.2.75.4.3.10.1.12)

read-create

Integer32

Standard MIB values.

Link keep-alive interval between AP and STA, in seconds

As per the MIB.

hh3cDot11SIDAPCir (1.3.6.1.4.1.25506.2.75.4.3.10.1.13)

read-create

Integer32

Standard MIB values.

Transmission rate between AP and AC

As per the MIB.

hh3cDot11SIDAPCbs (1.3.6.1.4.1.25506.2.75.4.3.10.1.14)

read-create

Integer32

Standard MIB values.

Congestion byte count between AP and AC

As per the MIB.

hh3cDot11SIDAPPriorityLevel (1.3.6.1.4.1.25506.2.75.4.3.10.1.15)

read-create

Integer32

Integer32(0..7)

Priority of AP connection, the default value is 4

As per the MIB.

hh3cDot11SIDAPElementID (1.3.6.1.4.1.25506.2.75.4.3.10.1.16)

read-only

Integer32

Standard MIB values.

APID

As per the MIB.

hh3cDot11SIDAPDevDetectEnable (1.3.6.1.4.1.25506.2.75.4.3.10.1.17)

read-create

TruthValue

true(1),

false(2)

Whether to enable device detection. With this feature enabled, the AP provides wireless services and device detection at the same time

As per the MIB.

Only supported by Comware 7-based products.

hh3cDot11SIDAPStatisIntervMode (1.3.6.1.4.1.25506.2.75.4.3.10.1.18)

read-create

INTEGER

normal(1)

realtime(2)

Statistical interval mode.

normal: statistical interval between 10s – 240s

realtime: statistical interval between 0s – 5s

As per the MIB.

hh3cDot11SIDAPWorkModeCM

(1.3.6.1.4.1.25506.2.75.4.3.10.1.19)

read-create

INTEGER

normal(0),

monitor(1), semimonitor(2)

AP working mode, default is normal

As per the MIB.

hh3cDot11SIDEchoInterval (1.3.6.1.4.1.25506.2.75.4.3.10.1.20)

read-create

Integer32

Standard MIB values.

Heartbeat keep-alive message interval

As per the MIB.

Object (OID)

Access

Syntax

Value range

Description

Implementation

hh3cDot11CfgSTVLANID (1.3.6.1.4.1.25506.2.75.4.3.11.1.1)

read-create

Integer32

Integer32(0..4094)

Current service policy bound to VLAN

As per the MIB.

hh3cDot11CfgSTNASPortID (1.3.6.1.4.1.25506.2.75.4.3.11.1.2)

read-only

OCTET STRING

OCTET STRING(0..127)

NAS port ID of the current service policy for each specific wireless radio frequency (RF) of the AP

As per the MIB.

hh3cDot11CfgServiceSetRowStatus (1.3.6.1.4.1.25506.2.75.4.3.11.1.3)

read-create

RowStatus

active(1),

notInService(2),

notReady(3),

createAndGo(4),

createAndWait(5),

destroy(6)

Entry state.

As per the MIB.

hh3cDot11CfgSTNASID (1.3.6.1.4.1.25506.2.75.4.3.11.1.4)

read-only

OCTET STRING

OCTET STRING (0..127)

NAS ID of the current service policy for each specific wireless radio frequency (RF) of the AP

As per the MIB.

Object (OID)

Access

Syntax

Value range

Description

Implementation

hh3cDot11RadioIntfBindSvcPlcyID (1.3.6.1.4.1.25506.2.75.4.4.2.1.1)

not-accessible

Hh3cDot11ServicePolicyIDType

Standard MIB values.

Each service policy's ID

As per the MIB.

hh3cDot11RadioIntfBindIfIdx (1.3.6.1.4.1.25506.2.75.4.4.2.1.2)

read-create

Unsigned32

Standard MIB values.

is bound to the Ifindex of the wireless radio frequency interface

As per the MIB.

hh3cDot11RadioIntfBindRowStatus (1.3.6.1.4.1.25506.2.75.4.4.2.1.3)

read-create

RowStatus

active(1),

notInService(2),

notReady(3),

createAndGo(4),

createAndWati(5),

destroy(6)

Entry state.

As per the MIB.

Object (OID)

Access

Syntax

Value range

Description

Implementation

hh3cDot11WlanEssRowStatus (1.3.6.1.4.1.25506.2.75.4.6.1.1.3)

read-create

RowStatus

active(1),

notInService(2),

notReady(3),

createAndGo(4),

createAndWait(5),

destroy(6)

WLAN ESS interface row status

As per the MIB.

Only supported by Comware 9-based products.

Object (OID)

Access

Syntax

Value range

Description

Implementation

hh3cDot11WlanBssIfNumber (1.3.6.1.4.1.25506.2.75.4.6.2.1.1)

not-accessible

Integer32

Standard MIB values.

WLAN BSS interface number

As per the MIB.

Only supported by Comware 9-based products.

Object (OID)

Access

Syntax

Value range

Description

Implementation

hh3cDot11PortSecurityMode (1.3.6.1.4.1.25506.2.75.4.6.4.1.1)

read-write

INTEGER

noRestrictions(1),

userLoginSecureExt(2),

psk(3),

macAddressAndPsk(4),

userLoginSecureExtOrPsk(5),

ext(6)

Security mode of the WLAN port.

As per the MIB.

Only supported by Comware 9-based products.

Object (OID)

Access

Syntax

Value range

Description

Implementation

hh3cDot11nRadioCfgIndex (1.3.6.1.4.1.25506.2.75.4.8.1.1.1)

not-accessible

Hh3cDot11RadioElementIndex

Unsigned32

Standard MIB values.

This AP radio index. It consists of two parts: the lowest 8 bits radio frequency ID, middle 8 APID, and the highest 8 bits reserve.

As per the MIB.

hh3cDot11nAMpduEnable (1.3.6.1.4.1.25506.2.75.4.8.1.1.2)

read-write

TruthValue

true(1),

false(2)

Whether A-MPDU function is enabled for this AP radio frequency

As per the MIB.

hh3cDot11nAMsduEnable (1.3.6.1.4.1.25506.2.75.4.8.1.1.3)

read-write

TruthValue

true(1),

false(2)

Whether A-MSDU function is enabled for this AP radio

As per the MIB.

hh3cDot11nClientDot11nOnly (1.3.6.1.4.1.25506.2.75.4.8.1.1.4)

read-write

TruthValue

true(1),

false(2)

If the radio type of this AP is 802.11an or 802.11gn, only negotiation for 11n mode is allowed for clients; if the radio frequency type is 802.11ac, negotiation for both 11n and 11ac modes is allowed for clients

As per the MIB.