Login
- Table of Contents
- Related Documents
-
| Title | Size | Download |
|---|---|---|
| 01-MPLS-FRR-FACILITY-STD-MIB | 82.10 KB |
MPLS-FRR-FACILITY-STD-MIB
About this MIB
Use this MIB to manage tunnels on the MPLS interfaces configured for FRR protection.
MIB file name
rfc6445-mpls-frr-facility-std.mib
Notifications
mplsFrrFacilityInitialBackupTunnelInvoked
Basic information
|
OID |
Event |
Type |
Severity |
Recovery notification |
Default status |
|
1.3.6.1.2.1.204.0.1 |
Interface failed and bypass tunnel took over. |
Error |
Major |
1.3.6.1.2.1.204.1.7.1.7 (mplsFrrFacilityDBNumProtectingTunnelOnIf) |
ON |
Notification triggers
Notification Triggers
System impact
OID
Event
Type
Severity
Recovery notification
Default status
1.3.6.1.2.1.204.0.1
Interface failed and bypass tunnel took over.
Error
Major
1.3.6.1.2.1.204.1.7.1.7
(mplsFrrFacilityDBNumProtectingTunnelOnIf)
ON
Description
This notification is generated when a bypass tunnel specified in mplsFrrConstraintsTable takes over the primary tunnel running over an interface also specified in the mplsFrrConstraintsTable.
【System impact】
Status control
ON
CLI: Use the snmp-agent trap enable te command.
OFF
CLI: Use the undo snmp-agent trap enable te command.
Object
|
OID (object name) |
Description |
Index |
Type |
Value range |
|
1.3.6.1.2.1.204.1.7.1.7 (mplsFrrFacilityDBNumProtectingTunnelOnIf) |
Number of bypass tunnels on an interface for protection. |
No |
Gauge32 |
Standard MIB values. |
|
1.3.6.1.2.1.204.1.7.1.8 (mplsFrrFacilityDBNumProtectedLspOnIf) |
Number of CRLSPs protected on the interface. |
No |
Gauge32 |
Standard MIB values. |
|
1.3.6.1.2.1.204.1.7.1.9 (mplsFrrFacilityDBNumProtectedTunnels) |
Number of tunnels protected on the interface. |
No |
Gauge32 |
Standard MIB values. |
|
1.3.6.1.2.1.204.1.7.1.10 (mplsFrrFacilityDBProtectingTunnelStatus) |
State of a bypass tunnel on the interface. |
No |
INTEGER |
active(1), ready(2) |
|
1.3.6.1.2.1.204.1.7.1.11 (mplsFrrFacilityDBProtectingTunnelResvBw) |
Amount of bandwidth reserved by a bypass tunnel on the interface. |
No |
Unsigned32 |
Standard MIB values. |
Recommended action
No action is required.
mplsFrrFacilityFinalTunnelRestored
Basic information
|
OID |
Event |
Type |
Severity |
Recovery notification |
Default status |
|
1.3.6.1.2.1.204.0.2 |
Interface recovered and primary tunnel recovered. |
Recovery |
Warning |
- |
ON |
Notification triggers
Notification Triggers
System impact
OID
Event
Type
Severity
Recovery notification
Default status
1.3.6.1.2.1.204.0.2
Interface recovered and primary tunnel recovered.
Recovery
Warning
-
ON
Description
This notification is generated when the primary tunnel that is being protected by a bypass tunnel as specified in the mplsFrrConstraintsTable restores normal operation.
【System impact】
Status control
ON
CLI: Use the snmp-agent trap enable te command.
OFF
CLI: Use the undo snmp-agent trap enable te command.
Object
|
OID (object name) |
Description |
Index |
Type |
Value range |
|
1.3.6.1.2.1.204.1.7.1.7 (mplsFrrFacilityDBNumProtectingTunnelOnIf) |
Number of bypass tunnels for FRR facility backup. |
No |
Unsigned32 |
Standard MIB values. |
|
1.3.6.1.2.1.204.1.7.1.8 (mplsFrrFacilityDBNumProtectedLspOnIf) |
Number of LSPs protected by FRR facility backup. |
No |
Unsigned32 |
Standard MIB values. |
|
1.3.6.1.2.1.204.1.7.1.9 (mplsFrrFacilityDBNumProtectedTunnels) |
Number of tunnels protected by FRR facility backup. |
No |
Unsigned32 |
Standard MIB values. |
|
1.3.6.1.2.1.204.1.7.1.10 (mplsFrrFacilityDBProtectingTunnelStatus) |
State of a bypass tunnel for FRR facility backup. |
No |
Integer32 |
active(1), ready(2) |
|
1.3.6.1.2.1.204.1.7.1.11 (mplsFrrFacilityDBProtectingTunnelResvBw) |
Amount of bandwidth reserved by the bypass tunnel for FRR facility backup. |
No |
Unsigned32 |
Standard MIB values. |
Recommended action
No action is required.
