Object (OID)	Access	Syntax	Value range	Description	Implementation
dot1qNextFreeLocalVlanIndex (1.3.6.1.2.1.17.7.1.4.4)	read-only	Integer32	Integer32 (0\|4096..2147483647)	The next available value for dot1qVlanIndex of a local VLAN entry in dot1qVlanStaticTable.	Not supported

dot1qConstraintSetDefault

Object (OID)	Access	Syntax	Value range	Description	Implementation
dot1qConstraintSetDefault (1.3.6.1.2.1.17.7.1.4.9)	read-write	Integer32	Integer32 (0..65535)	The identity of the constraint set to which a VLAN belongs, if there is not an explicit entry for that VLAN in dot1qLearningConstraintsTable.	Not supported

dot1qConstraintTypeDefault

Object (OID)

Access

Syntax

Value range

Description

Implementation

dot1qConstraintTypeDefault (1.3.6.1.2.1.17.7.1.4.10)

read-write

INTEGER

independent(1)

shared(2)

The type of constraint set to which a VLAN belongs.

Supports only the read operation.

dot1qVlanVersionNumber

Object (OID)	Access	Syntax	Value range	Description	Implementation
dot1qVlanVersionNumber (1.3.6.1.2.1.17.7.1.1.1)	read-only	INTEGER	version1(1)	The version number of IEEE 802.1Q that this device supports.	As per the MIB.

dot1qMaxVlanId

Object (OID)	Access	Syntax	Value range	Description	Implementation
dot1qMaxVlanId (1.3.6.1.2.1.17.7.1.1.2)	read-only	VlanId	Standard MIB values.	The maximum IEEE 802.1Q VLAN ID that this device supports.	As per the MIB.

dot1qMaxSupportedVlans

Object (OID)	Access	Syntax	Value range	Description	Implementation
dot1qMaxSupportedVlans (1.3.6.1.2.1.17.7.1.1.3)	read-only	Unsigned32	Standard MIB values.	The maximum number of IEEE 802.1Q VLANs that this device supports.	As per the MIB.

dot1qNumVlans

Object (OID)	Access	Syntax	Value range	Description	Implementation
dot1qNumVlans (1.3.6.1.2.1.17.7.1.1.4)	read-only	Unsigned32	Standard MIB values.	The current number of IEEE 802.1Q VLANs that are configured in this device.	As per the MIB.

dot1qGvrpStatus

Object (OID)

Access

Syntax

Value range

Description

Implementation

dot1qGvrpStatus (1.3.6.1.2.1.17.7.1.1.5)

read-write

EnabledStatus

enabled(1)

disabled(2)

The administrative status requested by management for GVRP:

· enable(1)—GVRP should be enabled on this device, on all ports for which it has not been specifically disabled.

· disable(2)—GVRP is disabled on all ports.

Not supported

Tabular objects

dot1qFdbTable

About this table

Use this table to display configuration and control information for each filtering database currently operating on this device.

Support for operations

Create	Edit/Modify	Delete	Read
Not supported	Not supported	Not supported	Supported

Columns

The table index is dot1qFdbId.

Object (OID)

Access

Syntax

Value range

Description

Implementation

dot1qFdbId

(1.3.6.1.2.1.17.7.1.2.1.1.1)

not-accessible

Unsigned32

Standard MIB values.

The identity of this filtering database.

As per the MIB.

dot1qFdbDynamicCount

(1.3.6.1.2.1.17.7.1.2.1.1.2)

read-only

Counter32

Standard MIB values.

The current number of dynamic entries in this filtering database.

As per the MIB.

dot1qTpFdbTable

About this table

Use this table to display information about unicast entries for which the device has forwarding and/or filtering information.

Support for operations

Create	Edit/Modify	Delete	Read
Not supported	Not supported	Not supported	Supported

Columns

The table indexes are dot1qFdbId and dot1qTpFdbAddress.

Object (OID)	Access	Syntax	Value range	Description	Implementation
dot1qTpFdbAddress (1.3.6.1.2.1.17.7.1.2.2.1.1)	not-accessible	MacAddress	Standard MIB values.	A unicast MAC address for which the device has forwarding and/or filtering information.	As per the MIB.
dot1qTpFdbPort (1.3.6.1.2.1.17.7.1.2.2.1.2)	read-only	Integer32	Integer32 (0..65535)	The port number of the port on which a frame having a source address equal to the value of the corresponding instance of dot1qTpFdbAddress has been seen. A value of 0 indicates that the port number has not been learned but that the device does have some forwarding/filtering information about this address.	As per the MIB.
dot1qTpFdbStatus (1.3.6.1.2.1.17.7.1.2.2.1.3)	read-only	INTEGER	other(1) invalid(2) learned(3) self(4) mgmt(5)	The status of this entry.	Manually added dynamic MAC address entries are counted as learned MAC address entries.

dot1qTpGroupTable

About this table

Use this table to obtain filtering information for VLANs configured into the bridge by (local or network) management, or learned dynamically.

Support for operations

Create	Edit/Modify	Delete	Read
Not supported	Not supported	Not supported	Supported

Columns

The table indexes are dot1qVlanIndex and dot1qTpGroupAddress.

Object (OID)	Access	Syntax	Value range	Description	Implementation
dot1qTpGroupAddress (1.3.6.1.2.1.17.7.1.2.3.1.1)	not-accessible	MacAddress	Standard MIB values.	The destination group MAC address in a frame to which this entry's filtering information applies.	As per the MIB.
dot1qTpGroupEgressPorts (1.3.6.1.2.1.17.7.1.2.3.1.2)	read-only	PortList	Standard MIB values.	The complete set of ports, in this VLAN, to which frames destined for this Group MAC address are currently being explicitly forwarded.	As per the MIB.
dot1qTpGroupLearnt (1.3.6.1.2.1.17.7.1.2.3.1.3)	read-only	PortList	Standard MIB values.	The subset of ports in dot1qTpGroupEgressPorts that were learned by GMRP or some other dynamic mechanism, in this filtering database.	As per the MIB.

dot1qForwardAllTable

About this table

Use this table to obtain forwarding information for each VLAN, specifying the set of ports to which forwarding of all multicasts applies.

Support for operations

Create	Edit/Modify	Delete	Read
Not supported	Not supported	Not supported	Not supported

Columns

The table index is dot1qVlanIndex.

Object (OID)	Access	Syntax	Value range	Description	Implementation
dot1qForwardAllPorts (1.3.6.1.2.1.17.7.1.2.4.1.1)	read-only	PortList	Standard MIB values.	The complete set of ports in this VLAN to which all multicast group-addressed frames are to be forwarded. This includes ports for which this need has been determined dynamically by GMRP, or configured statically by management.	Not supported
dot1qForwardAllStaticPorts (1.3.6.1.2.1.17.7.1.2.4.1.2)	read-write	PortList	Standard MIB values.	The set of ports configured by management in this VLAN to which all multicast group-addressed frames are to be forwarded.	Not supported
dot1qForwardAllForbiddenPorts (1.3.6.1.2.1.17.7.1.2.4.1.3)	read-write	PortList	Standard MIB values.	The set of ports configured by management in this VLAN for which the Service Requirement attribute Forward All Multicast Groups may not be dynamically registered by GMRP.	Not supported

Use this table to obtain forwarding information for each VLAN, specifying the set of ports to which forwarding of multicast group-addressed frames for which no more specific forwarding information applies.

Support for operations

Create	Edit/Modify	Delete	Read
Not supported	Not supported	Not supported	Not supported

Columns

The table index is dot1qVlanIndex.

Object (OID)	Access	Syntax	Value range	Description	Implementation
dot1qForwardUnregisteredPorts (1.3.6.1.2.1.17.7.1.2.5.1.1)	read-only	PortList	Standard MIB values.	The complete set of ports in this VLAN to which multicast group-addressed frames for which there is no more specific forwarding information will be forwarded. This includes ports for which this need has been determined dynamically by GMRP, or configured statically by management.	Not supported
dot1qForwardUnregisteredStaticPorts (1.3.6.1.2.1.17.7.1.2.5.1.2)	read-write	PortList	Standard MIB values.	The set of ports configured by management, in this VLAN, to which multicast group-addressed frames for which there is no more specific forwarding information.	Not supported
dot1qForwardUnregisteredForbiddenPorts (1.3.6.1.2.1.17.7.1.2.5.1.3)	read-write	PortList	Standard MIB values.	The set of ports configured by management in this VLAN for which the Service Requirement attribute Forward Unregistered Multicast Groups may not be dynamically registered by GMRP.	Not supported

dot1qStaticUnicastTable

About this table

Use this table to obtain filtering information for unicast MAC addresses for each filtering database.

Support for operations

Create	Edit/Modify	Delete	Read
Not supported	Not supported	Not supported	Not supported

Columns

The table indexes are dot1qFdbId, dot1qStaticUnicastAddress, and dot1qStaticUnicastReceivePort.

Object (OID)	Access	Syntax	Value range	Description	Implementation
dot1qStaticUnicastAddress (1.3.6.1.2.1.17.7.1.3.1.1.1)	not-accessible	MacAddress	Standard MIB values.	The destination MAC address in a frame to which this entry's filtering information applies.	Not supported
dot1qStaticUnicastReceivePort (1.3.6.1.2.1.17.7.1.3.1.1.2)	not-accessible	Integer32	Integer32 (0..65535)	The port number of the port from which a frame must be received in order for this entry's filtering information to apply. A value of 0 indicates that this entry applies on all ports of the device for which there is no other applicable entry.	Not supported
dot1qStaticUnicastAllowedToGoTo (1.3.6.1.2.1.17.7.1.3.1.1.3)	read-write	PortList	Standard MIB values.	The set of ports for which a frame with a specific unicast address will be flooded in the event that it has not been learned.	Not supported
dot1qStaticUnicastStatus (1.3.6.1.2.1.17.7.1.3.1.1.4)	read-write	INTEGER	other(1) invalid(2) permanent(3) deleteOnReset(4) deleteOnTimeout(5)	Status of this entry.	Not supported

dot1qStaticMulticastTable

About this table

Use this table to obtain filtering information for multicast and broadcast MAC addresses for each VLAN.

Support for operations

Create	Edit/Modify	Delete	Read
Not supported	Not supported	Not supported	Not supported

Columns

The table indexes are dot1qVlanIndex, dot1qStaticMulticastAddress, and dot1qStaticMulticastReceivePort.

Object (OID)	Access	Syntax	Value range	Description	Implementation
dot1qStaticMulticastAddress (1.3.6.1.2.1.17.7.1.3.2.1.1)	not-accessible	MacAddress	Standard MIB values.	The destination MAC address in a frame to which this entry's filtering information applies.	Not supported
dot1qStaticMulticastReceivePort (1.3.6.1.2.1.17.7.1.3.2.1.2)	not-accessible	Integer32	Integer32 (0..65535)	The port number of the port from which a frame must be received in order for this entry's filtering information to apply. A value of 0 indicates that this entry applies on all ports of the device for which there is no other applicable entry.	Not supported
dot1qStaticMulticastStaticEgressPorts (1.3.6.1.2.1.17.7.1.3.2.1.3)	read-write	PortList	Standard MIB values.	The set of ports to which frames received from a specific port and destined for a specific multicast or broadcast MAC address must be forwarded.	Not supported
dot1qStaticMulticastForbiddenEgressPorts (1.3.6.1.2.1.17.7.1.3.2.1.4)	read-write	PortList	Standard MIB values.	The set of ports to which frames received from a specific port and destined for a specific multicast or broadcast MAC address must not be forwarded.	Not supported
dot1qStaticMulticastStatus (1.3.6.1.2.1.17.7.1.3.2.1.5)	read-write	INTEGER	other(1) invalid(2) permanent(3) deleteOnReset(4) deleteOnTimeout(5)	Status of this entry.	Not supported

dot1qVlanCurrentTable

About this table

Use this table to obtain current configuration information for each VLAN currently configured into the device.

Support for operations

Create	Edit/Modify	Delete	Read
Not supported	Not supported	Not supported	Supported

Columns

The table indexes are dot1qVlanTimeMark and dot1qVlanIndex.

Object (OID)	Access	Syntax	Value range	Description	Implementation
dot1qVlanTimeMark (1.3.6.1.2.1.17.7.1.4.2.1.1)	not-accessible	TimeFilter	Standard MIB values.	A time filter for this entry.	As per the MIB.
dot1qVlanIndex (1.3.6.1.2.1.17.7.1.4.2.1.2)	not-accessible	VlanIndex	Standard MIB values.	The VLAN-ID or other identifier referring to this VLAN.	As per the MIB.
dot1qVlanFdbId (1.3.6.1.2.1.17.7.1.4.2.1.3)	read-only	Unsigned32	Standard MIB values.	The filtering database used by this VLAN.	As per the MIB.
dot1qVlanCurrentEgressPorts (1.3.6.1.2.1.17.7.1.4.2.1.4)	read-only	PortList	Standard MIB values.	The set of ports that are transmitting traffic for this VLAN as either tagged or untagged frames.	As per the MIB.
dot1qVlanCurrentUntaggedPorts (1.3.6.1.2.1.17.7.1.4.2.1.5)	read-only	PortList	Standard MIB values.	The set of ports that are transmitting traffic for this VLAN as untagged frames.	As per the MIB.
dot1qVlanStatus (1.3.6.1.2.1.17.7.1.4.2.1.6)	read-only	INTEGER	other(1) permanent(2) dynamicGvrp(3)	Status of this VLAN.	As per the MIB.
dot1qVlanCreationTime (1.3.6.1.2.1.17.7.1.4.2.1.7)	read-only	TimeTicks	Standard MIB values.	Time when this VLAN was created.	As per the MIB.

dot1qVlanStaticTable

About this table

Use this table to obtain static configuration information for each VLAN configured into the device.

Support for operations

Create	Edit/Modify	Delete	Read
Supported	Not supported	Not supported	Supported

Columns

The table index is dot1qVlanIndex.

Object (OID)	Access	Syntax	Value range	Description	Implementation
dot1qVlanStaticName (1.3.6.1.2.1.17.7.1.4.3.1.1)	read-create	SnmpAdminString	OCTET STRING (0..32)	VLAN name.	If the name string is too long or empty, a default name in the vlan VLAN ID format applies.
dot1qVlanStaticEgressPorts (1.3.6.1.2.1.17.7.1.4.3.1.2)	read-create	PortList	Standard MIB values.	The set of ports that are permanently assigned to the egress list for this VLAN by management.	As per the MIB.
dot1qVlanForbiddenEgressPorts (1.3.6.1.2.1.17.7.1.4.3.1.3)	read-create	PortList	Standard MIB values.	The set of ports that are prohibited by management from being included in the egress list for this VLAN.	Not supported
dot1qVlanStaticUntaggedPorts (1.3.6.1.2.1.17.7.1.4.3.1.4)	read-create	PortList	Standard MIB values.	The set of ports that should transmit egress packets for this VLAN as untagged.	As per the MIB.
dot1qVlanStaticRowStatus (1.3.6.1.2.1.17.7.1.4.3.1.5)	read-create	RowStatus	Standard MIB values.	Status of this VLAN.	Supports only active(1), createAndgo(4) and destroy(6). You cannot delete the default VLAN.

dot1qPortVlanTable

About this table

Use this table to obtain per-port control and status information for VLAN configuration in the device.

Support for operations

Create	Edit/Modify	Delete	Read
Not supported	Supported	Not supported	Supported

Columns

The table index is ifIndex.

Object (OID)	Access	Syntax	Value range	Description	Implementation
dot1qPvid (1.3.6.1.2.1.17.7.1.4.5.1.1)	read-write	VlanIndex	Standard MIB values.	The PVID, the VLAN ID assigned to untagged frames received on this port.	Does not support the write operation on an access port.
dot1qPortAcceptableFrameTypes (1.3.6.1.2.1.17.7.1.4.5.1.2)	read-write	INTEGER	admitAll(1) admitOnlyVlanTagged(2)	Packet types that this port can receive: · admitOnlyVlanTagged(2)—Drop untagged packets. · admitAll(1)—Accept untagged packets and assign them the PVID.	Supports only the read operation.
dot1qPortIngressFiltering (1.3.6.1.2.1.17.7.1.4.5.1.3)	read-write	TruthValue	true(1), false(2)	When this is true(1), the device will discard incoming frames for VLANs that do not include this port in its member set. When false(2), the port will accept all incoming frames.	Supports only the read operation.
dot1qPortGvrpStatus (1.3.6.1.2.1.17.7.1.4.5.1.4)	read-write	EnabledStatus	enabled(1), disabled(2)	The state of GVRP operation on this port: · enabled(1)—GVRP is enabled. · disabled(2)—GVRP is disabled. This port drops any incoming GVRP frames.	Not supported
dot1qPortGvrpFailedRegistrations (1.3.6.1.2.1.17.7.1.4.5.1.5)	read-only	Counter32	Standard MIB values.	The total number of failed GVRP registrations, for any reason, on this port.	Not supported
dot1qPortGvrpLastPduOrigin (1.3.6.1.2.1.17.7.1.4.5.1.6)	read-only	MacAddress	Standard MIB values.	The source MAC address of the last GVRP message received on this port.	Not supported
dot1qPortRestrictedVlanRegistration (1.3.6.1.2.1.17.7.1.4.5.1.7)	read-write	TruthValue	true(1), false(2)	The state of restricted vlan registration on this port. If the value of this object is true(1), then creation of a new dynamic VLAN entry is permitted only if there is a static vlan registration entry for the VLAN concerned, in which the registrar administrative control value for this port is normal registration.	Not supported

dot1qPortVlanStatisticsTable

About this table

Use this table to obtain per-port, per-VLAN statistics for traffic received. Separate objects are provided for both the most-significant and least-significant bits of statistics counters for ports that are associated with this transparent bridge. The most-significant bit objects are only required on high-capacity interfaces, as defined in the conformance clauses for these objects. This mechanism is provided as a way to read 64-bit counters for agents that support only SNMPv1.

Support for operations

Create	Edit/Modify	Delete	Read
Not supported	Not supported	Not supported	Not supported

Columns

The table indexes are dot1dBasePort and dot1qVlanIndex.

Object (OID)	Access	Syntax	Value range	Description	Implementation
dot1qTpVlanPortInFrames (1.3.6.1.2.1.17.7.1.4.6.1.1)	read-only	Counter32	Standard MIB values.	The number of valid frames received by this port from its segment that were classified as belonging to this VLAN.	Not supported
dot1qTpVlanPortOutFrames (1.3.6.1.2.1.17.7.1.4.6.1.2)	read-only	Counter32	Standard MIB values.	The number of valid frames transmitted by this port to its segment from the local forwarding process for this VLAN.	Not supported
dot1qTpVlanPortInDiscards (1.3.6.1.2.1.17.7.1.4.6.1.3)	read-only	Counter32	Standard MIB values.	The number of valid frames received by this port from its segment that were classified as belonging to this VLAN and that were discarded due to VLAN-related reasons.	Not supported
dot1qTpVlanPortInOverflowFrames (1.3.6.1.2.1.17.7.1.4.6.1.4)	read-only	Counter32	Standard MIB values.	The number of times the associated dot1qTpVlanPortInFrames counter has overflowed.	Not supported
dot1qTpVlanPortOutOverflowFrames (1.3.6.1.2.1.17.7.1.4.6.1.5)	read-only	Counter32	Standard MIB values.	The number of times the associated dot1qTpVlanPortOutFrames counter has overflowed.	Not supported
dot1qTpVlanPortInOverflowDiscards (1.3.6.1.2.1.17.7.1.4.6.1.6)	read-only	Counter32	Standard MIB values.	The number of times the associated dot1qTpVlanPortInDiscards counter has overflowed.	Not supported

dot1qPortVlanHCStatisticsTable

About this table

Use this table to obtain per-port, per-VLAN statistics for traffic on high-capacity interfaces.

Support for operations

Create	Edit/Modify	Delete	Read
Not supported	Not supported	Not supported	Not supported

Columns

The table indexes are dot1dBasePort and dot1qVlanIndex.

Object (OID)	Access	Syntax	Value range	Description	Implementation
dot1qTpVlanPortHCInFrames (1.3.6.1.2.1.17.7.1.4.7.1.1)	read-only	Counter64	Standard MIB values.	The number of valid frames received by this port from its segment that were classified as belonging to this VLAN.	Not supported
dot1qTpVlanPortHCOutFrames (1.3.6.1.2.1.17.7.1.4.7.1.2)	read-only	Counter64	Standard MIB values.	The number of valid frames transmitted by this port to its segment from the local forwarding process for this VLAN.	Not supported
dot1qTpVlanPortHCInDiscards (1.3.6.1.2.1.17.7.1.4.7.1.3)	read-only	Counter64	Standard MIB values.	The number of valid frames received by this port from its segment that were classified as belonging to this VLAN and that were discarded due to VLAN-related reasons.	Not supported

dot1qLearningConstraintsTable

About this table

Use this table to obtain learning constraints for sets of shared and independent VLANs.

Support for operations

Create	Edit/Modify	Delete	Read
Not supported	Not supported	Not supported	Not supported

Columns

The table indexes are dot1qConstraintVlan and dot1qConstraintSet.

Object (OID)	Access	Syntax	Value range	Description	Implementation
dot1qConstraintVlan (1.3.6.1.2.1.17.7.1.4.8.1.1)	not-accessible	VlanIndex	Standard MIB values.	The index of the row in this table for the VLAN constrained by this entry.	Not supported
dot1qConstraintSet (1.3.6.1.2.1.17.7.1.4.8.1.2)	not-accessible	Integer32	Integer32 (0..65535)	The identity of the constraint set to which dot1qConstraintVlan belongs.	Not supported
dot1qConstraintType (1.3.6.1.2.1.17.7.1.4.8.1.3)	read-create	INTEGER	independent(1), shared(2)	The type of constraint this entry defines: · independent(1)—The VLAN uses a filtering database independent from all other VLANs in the same set. · shared(2)—The VLAN shares the same filtering database as all other VLANs in the same set.	Not supported
dot1qConstraintStatus (1.3.6.1.2.1.17.7.1.4.8.1.4)	read-create	RowStatus	Standard MIB values.	Status of this row.	Not supported

dot1vProtocolGroupTable

About this table

Use this table to obtain mappings from protocol templates to protocol group identifiers used for port-and-protocol-based VLAN classification.

Support for operations

Create	Edit/Modify	Delete	Read
Not supported	Not supported	Not supported	Not supported

Columns

The table indexes are dot1vProtocolTemplateFrameType and dot1vProtocolTemplateProtocolValue.

Object (OID)	Access	Syntax	Value range	Description	Implementation
dot1vProtocolTemplateFrameType (1.3.6.1.2.1.17.7.1.5.1.1.1)	not-accessible	INTEGER	ethernet(1) rfc1042(2) snap8021H(3) snapOther(4) llcOther(5)	Data-link encapsulation format.	Not supported
dot1vProtocolTemplateProtocolValue (1.3.6.1.2.1.17.7.1.5.1.1.2)	not-accessible	OCTET STRING	OCTET STRING SIZE (2 \| 5)	The identification of the protocol above the data-link layer in a protocol template.	Not supported
dot1vProtocolGroupId (1.3.6.1.2.1.17.7.1.5.1.1.3)	read-create	Integer32	Integer32 (0..2147483647)	A group of protocols that are associated together when assigning a VID to a frame.	Not supported
dot1vProtocolGroupRowStatus (1.3.6.1.2.1.17.7.1.5.1.1.4)	read-create	RowStatus	Standard MIB values.	Status of this row.	Not supported

dot1vProtocolPortTable

About this table

Use this table to obtain VID sets used for port-and-protocol-based VLAN classification.

Support for operations

Create	Edit/Modify	Delete	Read
Not supported	Not supported	Not supported	Not supported

Columns

The table indexes are dot1dBasePort and dot1vProtocolPortGroupId.

Object (OID)	Access	Syntax	Value range	Description	Implementation
dot1vProtocolPortGroupId (1.3.6.1.2.1.17.7.1.5.2.1.1)	not-accessible	Integer32	Integer32 (1..2147483647)	A group of protocols in the protocol group database.	Not supported
dot1vProtocolPortGroupVid (1.3.6.1.2.1.17.7.1.5.2.1.2)	read-create	Integer32	Integer32 (1..4094)	The VID associated with a group of protocols for each port.	Not supported
dot1vProtocolPortRowStatus (1.3.6.1.2.1.17.7.1.5.2.1.3)	read-create	RowStatus	Standard MIB values.	Status of this row.	Not supported

05-Layer 2 - LAN Switching

About this table

Support for operations

Columns

About this table

Support for operations

Columns

About this table

Support for operations

Columns

About this table

Support for operations

Columns

About this table

Support for operations

Columns

About this table

Support for operations

Columns

About this table

Support for operations

Columns

About this table

Support for operations

Columns

About this table

Support for operations

Columns

About this table

Support for operations

Columns

About this table

Support for operations

Columns

About this table

Support for operations

Columns

About this table

Support for operations

Columns

About this table

Support for operations

Columns

About this table

Support for operations

Columns

Intelligent Terminal Products

Product Support Services

Technical Service Solutions

Resource Center

Policy

Online Help

Become a Partner

Partner Policy & Program

Global Learning

Partner Sales Resources

Service Business

News & Events

Contact Us