Object (OID)	Access	Syntax	Value range	Description	Implementation
ospfv3RouterId (1.3.6.1.2.1.191.1.1.1)	read-write	Ospfv3RouterIdTC	Unsigned32(1..'FFFFFFFF'h)	Unique identifier of a router in an AS.	Supports only the read operation.

ospfv3AdminStatus

Object (OID)	Access	Syntax	Value range	Description	Implementation
ospfv3AdminStatus (1.3.6.1.2.1.191.1.1.2)	read-write	Status	INTEGER{ enabled (1), disabled (2) }	Enabled indicates that a minimum of one interface is in up state. Disabled indicates that no interface is in up state.	Supports only the read operation.

Object (OID)

Access

Syntax

Value range

Description

Implementation

ospfv3AdminStatus (1.3.6.1.2.1.191.1.1.2)

read-write

Status

INTEGER{

enabled (1),

disabled (2)

}

Enabled indicates that a minimum of one interface is in up state. Disabled indicates that no interface is in up state.

Supports only the read operation.

ospfv3VersionNumber

Object (OID)	Access	Syntax	Value range	Description	Implementation
ospfv3VersionNumber (1.3.6.1.2.1.191.1.1.3)	read-only	INTEGER	version3 (3)	Version number (3).	As per the MIB.

ospfv3AreaBdrRtrStatus

Object (OID)	Access	Syntax	Value range	Description	Implementation
ospfv3AreaBdrRtrStatus (1.3.6.1.2.1.191.1.1.4)	read-only	TruthValue	true(1), false(2)	Whether the device is an ABR.	As per the MIB.

Object (OID)

Access

Syntax

Value range

Description

Implementation

ospfv3AreaBdrRtrStatus (1.3.6.1.2.1.191.1.1.4)

read-only

TruthValue

true(1),

false(2)

Whether the device is an ABR.

As per the MIB.

ospfv3ASBdrRtrStatus

Object (OID)	Access	Syntax	Value range	Description	Implementation
ospfv3ASBdrRtrStatus (1.3.6.1.2.1.191.1.1.5)	read-write	TruthValue	true(1), false(2)	Whether the device is an ASBR.	Supports only the read operation.

Object (OID)

Access

Syntax

Value range

Description

Implementation

ospfv3ASBdrRtrStatus (1.3.6.1.2.1.191.1.1.5)

read-write

TruthValue

true(1),

false(2)

Whether the device is an ASBR.

Supports only the read operation.

ospfv3AsScopeLsaCount

Object (OID)	Access	Syntax	Value range	Description	Implementation
ospfv3AsScopeLsaCount (1.3.6.1.2.1.191.1.1.6)	read-only	Gauge32	INTEGER(0..4294967295)	Number of AS external LSAs.	As per the MIB.

ospfv3AsScopeLsaCksumSum

Object (OID)	Access	Syntax	Value range	Description	Implementation
ospfv3AsScopeLsaCksumSum (1.3.6.1.2.1.191.1.1.7)	read-only	Unsigned32	Standard MIB values.	Sum of checksums in external LSAs.	As per the MIB.

ospfv3OriginateNewLsas

Object (OID)	Access	Syntax	Value range	Description	Implementation
ospfv3OriginateNewLsas (1.3.6.1.2.1.191.1.1.8)	read-only	Counter32	INTEGER(0..4294967295)	Number of new LSAs that have been originated. This number is incremented each time the device originates a new LSA.	As per the MIB.

ospfv3RxNewLsas

Object (OID)	Access	Syntax	Value range	Description	Implementation
ospfv3RxNewLsas (1.3.6.1.2.1.191.1.1.9)	read-only	Counter32	INTEGER(0..4294967295)	Number of newly received LSAs, excluding self-originated LSAs.	As per the MIB.

ospfv3ExtLsaCount

Object (OID)	Access	Syntax	Value range	Description	Implementation
ospfv3ExtLsaCount (1.3.6.1.2.1.191.1.1.10)	read-only	Gauge32	INTEGER(0..4294967295)	Number of Type-5 LSAs.	As per the MIB.

ospfv3ExtAreaLsdbLimit

Object (OID)	Access	Syntax	Value range	Description	Implementation
ospfv3ExtAreaLsdbLimit (1.3.6.1.2.1.191.1.1.11)	read-write	Integer32	Integer32(-1..'7FFFFFFF'h)	Maximum number of non-default ASEs in the LSDB. A value of -1 indicates no limit.	Supports only the read operation.

ospfv3ExitOverflowInterval

Object (OID)	Access	Syntax	Value range	Description	Implementation
ospfv3ExitOverflowInterval (1.3.6.1.2.1.191.1.1.12)	read-write	Unsigned32	Standard MIB values.	Time that the router takes to leave the OverflowState. 0 indicates the router does not leave the OverflowState until it is restarted.	Supports only the read operation.

ospfv3DemandExtensions

Object (OID)	Access	Syntax	Value range	Description	Implementation
ospfv3DemandExtensions (1.3.6.1.2.1.191.1.1.13)	read-write	TruthValue	true(1), false(2)	Support for demand routing.	Supports only the read operation.

Object (OID)

Access

Syntax

Value range

Description

Implementation

ospfv3DemandExtensions (1.3.6.1.2.1.191.1.1.13)

read-write

TruthValue

true(1),

false(2)

Support for demand routing.

Supports only the read operation.

ospfv3ReferenceBandwidth

Object (OID)	Access	Syntax	Value range	Description	Implementation
ospfv3ReferenceBandwidth (1.3.6.1.2.1.191.1.1.14)	read-write	Unsigned32	Standard MIB values.	Reference bandwidth in Kbps for calculating the interface cost.	When the value is divided by 1000, the decimal number will be ignored.

ospfv3RestartSupport

Object (OID)	Access	Syntax	Value range	Description	Implementation
ospfv3RestartSupport (1.3.6.1.2.1.191.1.1.15)	read-write	INTEGER	none(1), plannedOnly(2), plannedAndUnplanned(3)	Support for GR.	If the value changes from 1 to 2 or 3, IETF GR is supported. If the value changes between 2 and 3, the original GR type remains unchanged.

Object (OID)

Access

Syntax

Value range

Description

Implementation

ospfv3RestartSupport (1.3.6.1.2.1.191.1.1.15)

read-write

INTEGER

none(1), plannedOnly(2), plannedAndUnplanned(3)

Support for GR.

If the value changes from 1 to 2 or 3, IETF GR is supported.

If the value changes between 2 and 3, the original GR type remains unchanged.

ospfv3RestartInterval

Object (OID)	Access	Syntax	Value range	Description	Implementation
ospfv3RestartInterval (1.3.6.1.2.1.191.1.1.16)	read-write	Ospfv3UpToRefreshIntervalTC	Unsigned32 (40..1800)	GR timeout timer.	Value range: 40 to 1800.

ospfv3RestartStrictLsaChecking

Object (OID)	Access	Syntax	Value range	Description	Implementation
ospfv3RestartStrictLsaChecking (1.3.6.1.2.1.191.1.1.17)	read-write	TruthValue	true(1), false(2)	Whether the strict LSA checking capability is enabled for GR.	Default: false(2).

Object (OID)

Access

Syntax

Value range

Description

Implementation

ospfv3RestartStrictLsaChecking (1.3.6.1.2.1.191.1.1.17)

read-write

TruthValue

true(1),

false(2)

Whether the strict LSA checking capability is enabled for GR.

Default: false(2).

ospfv3RestartStatus

Object (OID)	Access	Syntax	Value range	Description	Implementation
ospfv3RestartStatus (1.3.6.1.2.1.191.1.1.18)	read-only	INTEGER	notRestarting(1), plannedRestart(2), unplannedRestart(3)	Graceful restart state.	As per the MIB.

ospfv3RestartAge

Object (OID)	Access	Syntax	Value range	Description	Implementation
ospfv3RestartAge (1.3.6.1.2.1.191.1.1.19)	read-only	Ospfv3UpToRefreshIntervalTC	Unsigned32 (1..1800)	Remaining time for the current graceful restart.	As per the MIB.

ospfv3RestartExitReason

Object (OID)	Access	Syntax	Value range	Description	Implementation
ospfv3RestartExitReason (1.3.6.1.2.1.191.1.1.20)	read-only	INTEGER	none(1), inProgress(2), completed(3) timedOut(4), topologyChanged(5)	GR exit reason.	As per the MIB.

ospfv3NotificationEnable

Object (OID)	Access	Syntax	Value range	Description	Implementation
ospfv3NotificationEnable (1.3.6.1.2.1.191.1.1.21)	read-write	TruthValue	true(1), false(2)	Whether OSPFv3 notification is enabled.	If the value of this object is true(1), all OSPFv3 notifications are enabled.

Object (OID)

Access

Syntax

Value range

Description

Implementation

ospfv3NotificationEnable (1.3.6.1.2.1.191.1.1.21)

read-write

TruthValue

true(1),

false(2)

Whether OSPFv3 notification is enabled.

If the value of this object is true(1), all OSPFv3 notifications are enabled.

ospfv3StubRouterSupport

Object (OID)	Access	Syntax	Value range	Description	Implementation
ospfv3StubRouterSupport (1.3.6.1.2.1.191.1.1.22)	read-only	TruthValue	true(1), false(2)	Support for stub router.	As per the MIB.

Object (OID)

Access

Syntax

Value range

Description

Implementation

ospfv3StubRouterSupport (1.3.6.1.2.1.191.1.1.22)

read-only

TruthValue

true(1),

false(2)

Support for stub router.

As per the MIB.

ospfv3StubRouterAdvertisement

Object (OID)	Access	Syntax	Value range	Description	Implementation
ospfv3StubRouterAdvertisement (1.3.6.1.2.1.191.1.1.23)	read-write	INTEGER	doNotAdvertise(1), advertise(2)	Whether to advertise stub router LSAs.	As per the MIB.

ospfv3DiscontinuityTime

Object (OID)	Access	Syntax	Value range	Description	Implementation
ospfv3DiscontinuityTime (1.3.6.1.2.1.191.1.1.24)	read-only	TimeStamp	TimeTicks	Most recent system startup time.	As per the MIB.

ospfv3RestartTime

Object (OID)	Access	Syntax	Value range	Description	Implementation
ospfv3RestartTime (1.3.6.1.2.1.191.1.1.25)	read-only	TimeStamp	TimeTicks	Time when the most recent GR occurred.	As per the MIB.

Tabular objects

ospfv3AreaTable

About this table

This table contains parameter and statistics information about each area on the device.

Support for operations

Create	Edit/Modify	Delete	Read
Not supported	Supported	Not supported	Supported

Columns

The table index is ospfv3AreaId.

Object (OID)	Access	Syntax	Value range	Description	Implementation
ospfv3AreaId (1.3.6.1.2.1.191.1.2.1.1)	not-accessible	Ospfv3AreaIdTC	Unsigned32 (0..'FFFFFFFF'h)	Area ID, a 32-bit integer that uniquely identifies an area.	As per the MIB.
ospfv3AreaImportAsExtern (1.3.6.1.2.1.191.1.2.1.2)	read-create	INTEGER	importExternal(1), importNoExternal(2), importNssa(3)	Area type, stub, NSSA, or common area.	Supports only the read operation.
ospfv3AreaSpfRuns (1.3.6.1.2.1.191.1.2.1.3)	read-only	Counter32	INTEGER(0..4294967295)	Time of route calculations in the area.	As per the MIB.
ospfv3AreaBdrRtrCount (1.3.6.1.2.1.191.1.2.1.4)	read-only	Gauge32	INTEGER(0..4294967295)	Number of reachable ABRs in the area.	As per the MIB.
ospfv3AreaAsBdrRtrCount (1.3.6.1.2.1.191.1.2.1.5)	read-only	Gauge32	INTEGER(0..4294967295)	Number of reachable ASBRs in the area.	As per the MIB.
ospfv3AreaScopeLsaCount (1.3.6.1.2.1.191.1.2.1.6)	read-only	Gauge32	INTEGER(0..4294967295)	Number of LSAs in the LSDB of the area.	As per the MIB.
ospfv3AreaScopeLsaCksumSum (1.3.6.1.2.1.191.1.2.1.7)	read-only	Unsigned32	Standard MIB values.	Sum of the checksums of the LSAs in the area.	As per the MIB.
ospfv3AreaSummary (1.3.6.1.2.1.191.1.2.1.8)	read-create	INTEGER	noAreaSummary(1), sendAreaSummary(2)	Whether to send summary LSAs to stub and NSSA areas.	Supports read and write operations.
ospfv3AreaRowStatus (1.3.6.1.2.1.191.1.2.1.9)	read-create	RowStatus	active(1), notInService(2), notReady(3), createAndGo(4), createAndWait(5), destroy(6)	Area state.	Supports only the read operation.
ospfv3AreaStubMetric (1.3.6.1.2.1.191.1.2.1.10)	read-create	BigMetric	Integer32(0..16777215)	Cost of the default route advertised to a stub or NSSA area.	Supports read and write operations. Default: 1. Value range: 0 to 16777214.
ospfv3AreaNssaTranslatorRole (1.3.6.1.2.1.191.1.2.1.11)	read-create	INTEGER	always(1), candidate(2)	Ability of the NSSA ABR to translate Type-7 LSAs into Type-5 LSAs.	Supports read and write operations.
ospfv3AreaNssaTranslatorState (1.3.6.1.2.1.191.1.2.1.12)	read-only	INTEGER	enabled(1), elected(2), disabled(3)	State for the NSSA ABR to become capable of translating Type-7 LSAs into Type-5 LSAs.	As per the MIB.
ospfv3AreaNssaTranslatorStabInterval (1.3.6.1.2.1.191.1.2.1.13)	read-create	Unsigned32	Standard MIB values.	Time period during which the elected translator continues to perform translation after determining that its services are no longer required.	Supports read and write operations. Default: 0. Value range: 0 to 900.
ospfv3AreaNssaTranslatorEvents (1.3.6.1.2.1.191.1.2.1.14)	read-only	Counter32	INTEGER(0..4294967295)	Number of role changes.	As per the MIB.
ospfv3AreaStubMetricType (1.3.6.1.2.1.191.1.2.1.15)	read-create	INTEGER	ospfv3Metric(1), ableCost(2), mparable(3)	Cost type of the default route advertised to a stub or NSSA area.	Supports only the read operation.
ospfv3AreaTEEnabled (1.3.6.1.2.1.191.1.2.1.16)	read-create	TruthValue	true(1), false(2)	Whether TE is enabled.	Supports only the read operation.

ospfv3AsLsdbTable (not supported)

About this table

This table contains information about LSDB information of an AS.

Support for operations

Create	Edit/Modify	Delete	Read
Not supported	Not supported	Not supported	Supported

Columns

The table indexes are ospfv3AsLsdbType, ospfv3AsLsdbRouterId, and ospfv3AsLsdbLsid.

Object (OID)	Access	Syntax	Value range	Description	Implementation
ospfv3AsLsdbType (1.3.6.1.2.1.191.1.3.1.1)	not-accessible	Unsigned32	Unsigned32(0..'FFFFFFFF'h)	LSA type.	As per the MIB.
ospfv3AsLsdbRouterId (1.3.6.1.2.1.191.1.3.1.2)	not-accessible	Ospfv3RouterIdTC	Unsigned32(1..'FFFFFFFF'h)	Router ID of the device that generates the LSA.	As per the MIB.
ospfv3AsLsdbLsid (1.3.6.1.2.1.191.1.3.1.3)	not-accessible	Ospfv3LsIdTC	Unsigned32 (1..'FFFFFFFF'h)	LS ID.	As per the MIB.
ospfv3AsLsdbSequence (1.3.6.1.2.1.191.1.3.1.4)	read-only	Ospfv3LsaSequenceTC	Integer32	LSA sequence number.	As per the MIB.
ospfv3AsLsdbAge (1.3.6.1.2.1.191.1.3.1.5)	read-only	Ospfv3LsaAgeTC	Unsigned32 (0..3600)	LSA age.	As per the MIB.
ospfv3AsLsdbChecksum (1.3.6.1.2.1.191.1.3.1.6)	read-only	Integer32	Standard MIB values.	Checksum.	As per the MIB.
ospfv3AsLsdbAdvertisement (1.3.6.1.2.1.191.1.3.1.7)	read-only	OCTET STRING	OCTET STRING(1..65535)	LSA information, including the header.	As per the MIB.
ospfv3AsLsdbTypeKnown (1.3.6.1.2.1.191.1.3.1.8)	read-only	TruthValue	true(1), false(2)	Whether the LSA type is unknown.	As per the MIB.

ospfv3AreaLsdbTable

About this table

This table contains information about LSDB information of an area.

Support for operations

Create	Edit/Modify	Delete	Read
Not supported	Not supported	Not supported	Supported

Columns

The table indexes are ospfv3AreaLsdbAreaId, ospfv3AreaLsdbType, ospfv3AreaLsdbRouterId, and ospfv3AreaLsdbLsid.

Object (OID)	Access	Syntax	Value range	Description	Implementation
ospfv3AreaLsdbAreaId (1.3.6.1.2.1.191.1.4.1.1)	not-accessible	Ospfv3AreaIdTC	Unsigned32 (0..'FFFFFFFF'h)	Area from which the LSA was received.	As per the MIB.
ospfv3AreaLsdbType (1.3.6.1.2.1.191.1.4.1.2)	not-accessible	Unsigned32	Unsigned32(0..'FFFFFFFF'h)	LSA type.	As per the MIB.
ospfv3AreaLsdbRouterId (1.3.6.1.2.1.191.1.4.1.3)	not-accessible	Ospfv3RouterIdTC	Unsigned32(1..'FFFFFFFF'h)	Router ID of the device that generates the LSA.	As per the MIB.
ospfv3AreaLsdbLsid (1.3.6.1.2.1.191.1.4.1.4)	not-accessible	Ospfv3LsIdTC	Unsigned32 (1..'FFFFFFFF'h)	LS ID.	As per the MIB.
ospfv3AreaLsdbSequence (1.3.6.1.2.1.191.1.4.1.5)	read-only	Ospfv3LsaSequenceTC	Integer32	LSA sequence number.	As per the MIB.
ospfv3AreaLsdbAge (1.3.6.1.2.1.191.1.4.1.6)	read-only	Ospfv3LsaAgeTC	Unsigned32 (0..3600)	LSA age.	As per the MIB.
ospfv3AreaLsdbChecksum (1.3.6.1.2.1.191.1.4.1.7)	read-only	Integer32	Standard MIB values.	Checksum.	As per the MIB.
ospfv3AreaLsdbAdvertisement (1.3.6.1.2.1.191.1.4.1.8)	read-only	OCTET STRING	OCTET STRING(1..65535)	LSA information, including the header.	As per the MIB.
ospfv3AreaLsdbTypeKnown (1.3.6.1.2.1.191.1.4.1.9)	read-only	TruthValue	true(1), false(2)	Whether the LSA type is unknown.	As per the MIB.

ospfv3LinkLsdbTable

About this table

This table contains link-scope LSDB information.

Support for operations

Create	Edit/Modify	Delete	Read
Not supported	Not supported	Not supported	Supported

Columns

The table indexes are ospfv3LinkLsdbIfIndex, ospfv3LinkLsdbIfInstId, ospfv3LinkLsdbType, ospfv3LinkLsdbRouterId, and ospfv3LinkLsdbLsid.

Object (OID)	Access	Syntax	Value range	Description	Implementation
ospfv3LinkLsdbIfIndex (1.3.6.1.2.1.191.1.5.1.1)	not-accessible	InterfaceIndex	Integer32(1..2147483647)	Interface index.	As per the MIB.
ospfv3LinkLsdbIfInstId (1.3.6.1.2.1.191.1.5.1.2)	not-accessible	Ospfv3IfInstIdTC	Unsigned32(0..255)	Instance ID.	As per the MIB.
ospfv3LinkLsdbType (1.3.6.1.2.1.191.1.5.1.3)	not-accessible	Unsigned32	Unsigned32(0..'FFFFFFFF'h)	LSA type.	As per the MIB.
ospfv3LinkLsdbRouterId (1.3.6.1.2.1.191.1.5.1.4)	not-accessible	Ospfv3RouterIdTC	Unsigned32(1..'FFFFFFFF'h)	Router ID of the device that generates the LSA.	As per the MIB.
ospfv3LinkLsdbLsid (1.3.6.1.2.1.191.1.5.1.5)	not-accessible	Ospfv3LsIdTC	Unsigned32 (1..'FFFFFFFF'h)	LS ID.	As per the MIB.
ospfv3LinkLsdbSequence (1.3.6.1.2.1.191.1.5.1.6)	read-only	Ospfv3LsaSequenceTC	Integer32	LSA sequence number.	As per the MIB.
ospfv3LinkLsdbAge (1.3.6.1.2.1.191.1.5.1.7)	read-only	Ospfv3LsaAgeTC	Unsigned32 (0..3600)	LSA age.	As per the MIB.
ospfv3LinkLsdbChecksum (1.3.6.1.2.1.191.1.5.1.8)	read-only	Integer32	Standard MIB values.	Checksum.	As per the MIB.
ospfv3LinkLsdbAdvertisement (1.3.6.1.2.1.191.1.5.1.9)	read-only	OCTET STRING	OCTET STRING(1..65535)	LSA information, including the header.	As per the MIB.
ospfv3LinkLsdbTypeKnown (1.3.6.1.2.1.191.1.5.1.10)	read-only	TruthValue	true(1), false(2)	Whether the LSA type is unknown.	As per the MIB.

ospfv3HostTable

About this table

This table contains host route information (not supported in the current software version).

Support for operations

Create	Edit/Modify	Delete	Read
Supported	Supported	Supported	Supported

Columns

The table indexes are ospfv3HostAddressType and ospfv3HostAddress.

Object (OID)	Access	Syntax	Value range	Description	Implementation
ospfv3HostAddressType (1.3.6.1.2.1.191.1.6.1.)	not-accessible	InetAddressType	unknown(0), ipv4(1), ipv6(2), ipv4z(3), ipv6z(4), dns(16)	Host route address type.	Not supported
ospfv3HostAddress (1.3.6.1.2.1.191.1.6.2.)	not-accessible	InetAddress	OCTET STRING(0..255)	Host route address.	Not supported
ospfv3HostMetric (1.3.6.1.2.1.191.1.6.3.)	read-create	Metric	Integer32(0..'FFFF'h)	Host route cost.	Not supported
ospfv3HostRowStatus( 1.3.6.1.2.1.191.1.6.4.)	read-create	RowStatus	active(1), notInService(2), notReady(3), createAndGo(4), createAndWait(5), destroy(6)	Row status.	Not supported
ospfv3HostAreaID (1.3.6.1.2.1.191.1.6.5.)	read-create	Ospfv3AreaIdTC	Unsigned32 (0..'FFFFFFFF'h)	ID of the area to which the host route belongs.	Not supported

ospfv3IfTable

About this table

This table contains OSPFv3 interface information.

Support for operations

Create	Edit/Modify	Delete	Read
Not supported	Supported	Not supported	Supported

Columns

The table indexes are ospfv3IfIndex and ospfv3IfInstId.

Object (OID)	Access	Syntax	Value range	Description	Implementation
ospfv3IfIndex (1.3.6.1.2.1.191.1.7.1.1)	not-accessible	InterfaceIndex	Integer32(1..2147483647)	Interface index.	As per the MIB.
ospfv3IfInstId (1.3.6.1.2.1.191.1.7.1.2)	not-accessible	Ospfv3IfInstIdTC	Unsigned32(0..255)	Interface instance ID.	As per the MIB.
ospfv3IfAreaId (1.3.6.1.2.1.191.1.7.1.3)	read-create	Ospfv3AreaIdTC	Unsigned32 (0..'FFFFFFFF'h)	Area ID.	Supports only the read operation.
ospfv3IfType (1.3.6.1.2.1.191.1.7.1.4)	read-create	INTEGER	broadcast(1), nbma(2), pointToPoint(3), pointToMultipoint(5)	Interface type.	Supports read and write operations. Loopback interfaces do not support the write operation.
ospfv3IfAdminStatus (1.3.6.1.2.1.191.1.7.1.5)	read-create	Status	INTEGER{ enabled (1), disabled (2) }	Administrative state of the interface.	Supports only the read operation.
ospfv3IfRtrPriority (1.3.6.1.2.1.191.1.7.1.6)	read-create	DesignatedRouterPriority	Integer32(0..'FF'h)	DR priority of the interface.	Supports read and write operations. Loopback interfaces do not support the write operation.
ospfv3IfTransitDelay (1.3.6.1.2.1.191.1.7.1.7)	read-create	Ospfv3UpToRefreshIntervalTC	Unsigned32 (1..1800)	LSA transmission delay.	Supports read and write operations. Loopback interfaces do not support the write operation. Value range: 1 to 1800.
ospfv3IfRetransInterval (1.3.6.1.2.1.191.1.7.1.8)	read-create	Ospfv3UpToRefreshIntervalTC	Unsigned32 (1..1800)	Retransmission interval of the interface.	Supports read and write operations. Loopback interfaces do not support the write operation. Value range: 1 to 1800.
ospfv3IfHelloInterval (1.3.6.1.2.1.191.1.7.1.9)	read-create	HelloRange	Integer32(1..'FFFF'h)	Hello interval of the interface.	Supports read and write operations. Loopback interfaces do not support the write operation.
ospfv3IfRtrDeadInterval (1.3.6.1.2.1.191.1.7.1.10)	read-create	Ospfv3DeadIntervalRangeTC	Integer32(1..'FFFF'h)	Dead interval.	Supports read and write operations. Loopback interfaces do not support the write operation. When the value of ospfv3IfRtrDeadInterval is larger than 65535, this object returns 65535.
ospfv3IfPollInterval (1.3.6.1.2.1.191.1.7.1.11)	read-create	Unsigned32	Standard MIB values.	Poll interval.	Supports read and write operations. Value range: 1 to 65535. Loopback interfaces do not support the write operation.
ospfv3IfState (1.3.6.1.2.1.191.1.7.1.12)	read-only	INTEGER	down(1), loopback(2), waiting(3), pointToPoint(4), designatedRouter(5), backupDesignatedRouter(6), otherDesignatedRouter(7), standby(8)	Interface state.	As per the MIB.
ospfv3IfDesignatedRouter (1.3.6.1.2.1.191.1.7.1.13)	read-only	Ospfv3RouterIdTC	Unsigned32(1..'FFFFFFFF'h)	DR address.	As per the MIB.
ospfv3IfBackupDesignatedRouter (1.3.6.1.2.1.191.1.7.1.14)	read-only	Ospfv3RouterIdTC	Unsigned32(1..'FFFFFFFF'h)	BDR address.	As per the MIB.
ospfv3IfEvents(1.3.6.1.2.1.191.1.7.1.15)	read-only	Counter32	INTEGER(0..4294967295)	Number of interface state changes.	As per the MIB.
ospfv3IfRowStatus (1.3.6.1.2.1.191.1.7.1.16)	read-create	RowStatus	active(1), notInService(2), notReady(3), createAndGo(4), createAndWait(5), destroy(6)	Row status.	Supports only the read operation.
ospfv3IfDemand (1.3.6.1.2.1.191.1.7.1.17)	read-create	TruthValue	true(1), false(2)	Whether the interface performs demand routing.	Supports only the read operation.
ospfv3IfMetricValue (1.3.6.1.2.1.191.1.7.1.18)	read-create	Metric	Integer32(0..'FFFF'h)	Interface cost.	Supports read and write operations. Value range for loopback interfaces: 0 to 65535. Value range for other interfaces: 1 to 65535.
ospfv3IfLinkScopeLsaCount (1.3.6.1.2.1.191.1.7.1.19)	read-only	Gauge32	INTEGER(0..4294967295)	Number of link-scope LSAs.	As per the MIB.
ospfv3IfLinkLsaCksumSum (1.3.6.1.2.1.191.1.7.1.20)	read-only	Unsigned32	Standard MIB values.	LSA checksum.	As per the MIB.
ospfv3IfDemandNbrProbe (1.3.6.1.2.1.191.1.7.1.21)	read-create	TruthValue	true(1), false(2)	Whether neighbor probing is enabled.	Supports only the read operation.
ospfv3IfDemandNbrProbeRetransLimit (1.3.6.1.2.1.191.1.7.1.22)	read-create	Unsigned32	Standard MIB values.	Number of neighbor probing times.	Supports only the read operation.
ospfv3IfDemandNbrProbeInterval (1.3.6.1.2.1.191.1.7.1.23)	read-create	Unsigned32	Standard MIB values.	Neighbor probing interval.	Supports only the read operation.
ospfv3IfTEDisabled (1.3.6.1.2.1.191.1.7.1.24)	read-create	TruthValue	true(1), false(2)	Whether TE is enabled on the interface.	Supports only the read operation.
ospfv3IfLinkLSASuppression (1.3.6.1.2.1.191.1.7.1.25)	read-create	TruthValue	true(1), false(2)	Whether LSA suppression is enabled.	Supports only the read operation.

ospfv3VirtIfTable

About this table

This table contains OSPFv3 virtual interface information.

Support for operations

Create	Edit/Modify	Delete	Read
Not supported	Supported	Not supported	Supported

Columns

The table indexes are ospfv3VirtIfAreaId and ospfv3VirtIfNeighbor.

Object (OID)	Access	Syntax	Value range	Description	Implementation
ospfv3VirtIfAreaId (1.3.6.1.2.1.191.1.8.1.1)	not-accessible	Ospfv3AreaIdTC	Unsigned32 (0..'FFFFFFFF'h)	ID of the area to which the virtual interface belongs.	As per the MIB.
ospfv3VirtIfNeighbor (1.3.6.1.2.1.191.1.8.1.2)	not-accessible	Ospfv3RouterIdTC	Unsigned32(1..'FFFFFFFF'h)	Router ID of the virtual neighbor.	As per the MIB.
ospfv3VirtIfIndex (1.3.6.1.2.1.191.1.8.1.3)	read-only	InterfaceIndex	Integer32(1..2147483647)	Virtual interface index.	As per the MIB.
ospfv3VirtIfInstId (1.3.6.1.2.1.191.1.8.1.4)	read-only	Ospfv3IfInstIdTC	Unsigned32(0..255)	Virtual interface instance ID.	As per the MIB.
ospfv3VirtIfTransitDelay (1.3.6.1.2.1.191.1.8.1.5)	read-create	Ospfv3UpToRefreshIntervalTC	Unsigned32 (1..1800)	Transmission delay of the virtual interface.	Supports read and write operations. Value range: 1 to 1800.
ospfv3VirtIfRetransInterval (1.3.6.1.2.1.191.1.8.1.6)	read-create	Ospfv3UpToRefreshIntervalTC	Unsigned32 (1..1800)	Retransmission interval of the virtual interface.	Supports read and write operations. Value range: 1 to 1800.
ospfv3VirtIfHelloInterval (1.3.6.1.2.1.191.1.8.1.7)	read-create	HelloRange	Integer32(1..'FFFF'h)	Hello interval of the virtual interface.	Supports read and write operations. Value range: 1 to 8192.
ospfv3VirtIfRtrDeadInterval (1.3.6.1.2.1.191.1.8.1.8)	read-create	Ospfv3DeadIntervalRangeTC	Integer32(1..'FFFF'h)	Dead interval of the virtual interface.	Supports read and write operations. Default: 40. Value range: 1 to 32768.
ospfv3VirtIfState (1.3.6.1.2.1.191.1.8.1.9)	read-only	INTEGER	down(1), pointToPoint(4)	Virtual interface state.	As per the MIB.
ospfv3VirtIfEvents (1.3.6.1.2.1.191.1.8.1.10)	read-only	Counter32	INTEGER(0..4294967295)	Number of virtual interface state changes.	As per the MIB.
ospfv3VirtIfRowStatus (1.3.6.1.2.1.191.1.8.1.11)	read-create	RowStatus	active(1), notInService(2), notReady(3), createAndGo(4), createAndWait(5), destroy(6)	Row status.	Supports only the read operation.
ospfv3VirtIfLinkScopeLsaCount (1.3.6.1.2.1.191.1.8.1.12)	read-only	Gauge32	INTEGER(0..4294967295)	Number of link LSAs on the virtual interface.	As per the MIB.
ospfv3VirtIfLinkLsaCksumSum (1.3.6.1.2.1.191.1.8.1.13)	read-only	Unsigned32	Standard MIB values.	Sum of checksums in link-scope LSAs.	As per the MIB.

ospfv3NbrTable

About this table

This table contains OSPFv3 neighbor information.

Support for operations

Create	Edit/Modify	Delete	Read
Not supported	Not supported	Not supported	Supported

Columns

The table indexes are ospfv3NbrIfIndex, ospfv3NbrIfInstId, and ospfv3NbrRtrId.

Object (OID)	Access	Syntax	Value range	Description	Implementation
ospfv3NbrIfIndex (1.3.6.1.2.1.191.1.9.1.1)	not-accessible	InterfaceIndex	Integer32(1..2147483647)	Egress interface index.	As per the MIB.
ospfv3NbrIfInstId (1.3.6.1.2.1.191.1.9.1.2)	not-accessible	Ospfv3IfInstIdTC	Unsigned32(0..255)	Egress interface instance ID.	As per the MIB.
ospfv3NbrRtrId (1.3.6.1.2.1.191.1.9.1.3)	not-accessible	Ospfv3RouterIdTC	Unsigned32(1..'FFFFFFFF'h)	Router ID of the neighbor.	As per the MIB.
ospfv3NbrAddressType (1.3.6.1.2.1.191.1.9.1.4)	read-only	InetAddressType	unknown(0), ipv4(1), ipv6(2), ipv4z(3), ipv6z(4), dns(16)	Neighbor address type.	As per the MIB.
ospfv3NbrAddress (1.3.6.1.2.1.191.1.9.1.5)	read-only	InetAddress	OCTET STRING(0..255)	Neighbor address.	As per the MIB.
ospfv3NbrOptions (1.3.6.1.2.1.191.1.9.1.6)	read-only	Integer32	Standard MIB values.	Priority of the neighbor.	As per the MIB.
ospfv3NbrPriority (1.3.6.1.2.1.191.1.9.1.7)	read-only	DesignatedRouterPriority	Integer32(0..'FF'h)	Option field of the neighbor.	As per the MIB.
ospfv3NbrState (1.3.6.1.2.1.191.1.9.1.8)	read-only	INTEGER	down(1), attempt(2), init(3), twoWay(4), exchangeStart(5), exchange(6), loading(7), full(8)	Neighbor state.	As per the MIB.
ospfv3NbrEvents (1.3.6.1.2.1.191.1.9.1.9)	read-only	Counter32	INTEGER(0..4294967295)	Number of neighbor state changes.	As per the MIB.
ospfv3NbrLsRetransQLen (1.3.6.1.2.1.191.1.9.1.10)	read-only	Gauge32	INTEGER(0..4294967295)	Retransmission queue length.	As per the MIB.
ospfv3NbrHelloSuppressed (1.3.6.1.2.1.191.1.9.1.11)	read-only	TruthValue	true(1), false(2)	Whether hello packets are being suppressed to the neighbor.	As per the MIB.
ospfv3NbrIfId (1.3.6.1.2.1.191.1.9.1.12)	read-only	InterfaceIndex	Integer32(1..2147483647)	Neighbor interface ID.	As per the MIB.
ospfv3NbrRestartHelperStatus (1.3.6.1.2.1.191.1.9.1.13)	read-only	INTEGER	notHelping(1), helping(2)	Whether the router is acting as a GR helper for the neighbor.	As per the MIB.
ospfv3NbrRestartHelperAge (1.3.6.1.2.1.191.1.9.1.14)	read-only	Ospfv3UpToRefreshIntervalTC	Unsigned32 (1..1800)	Remaining time of the GR interval when the router is acting as a GR helper for the neighbor.	As per the MIB.
ospfv3NbrRestartHelperExitReason (1.3.6.1.2.1.191.1.9.1.15)	read-only	INTEGER	none(1), inProgress(2), completed(3), timedOut(4), topologyChanged(5)	GR helper exit reason.	As per the MIB.

ospfv3CfgNbrTable

About this table

This table contains OSPFv3 neighbor information.

Support for operations

Create	Edit/Modify	Delete	Read
Not supported	Supported	Not supported	Supported

Columns

The table indexes are ospfv3CfgNbrIfIndex, ospfv3CfgNbrIfInstId, ospfv3CfgNbrAddressType, and ospfv3CfgNbrAddress.

Object (OID)	Access	Syntax	Value range	Description	Implementation
ospfv3CfgNbrIfIndex (1.3.6.1.2.1.191.1.10.1.1)	not-accessible	InterfaceIndex	Integer32(1..2147483647)	Configured neighbor interface index.	As per the MIB.
ospfv3CfgNbrIfInstId (1.3.6.1.2.1.191.1.10.1.2)	not-accessible	Ospfv3IfInstIdTC	Unsigned32(0..255)	Configured neighbor interface instance ID.	As per the MIB.
ospfv3CfgNbrAddressType (1.3.6.1.2.1.191.1.10.1.3)	not-accessible	InetAddressType	unknown(0), ipv4(1), ipv6(2), ipv4z(3), ipv6z(4), dns(16)	Configured neighbor address type.	As per the MIB.
ospfv3CfgNbrAddress (1.3.6.1.2.1.191.1.10.1.4)	not-accessible	InetAddress	OCTET STRING(0..255)	Configured neighbor address.	As per the MIB.
ospfv3CfgNbrPriority (1.3.6.1.2.1.191.1.10.1.5)	read-create	DesignatedRouterPriority	Integer32(0..'FF'h)	Configured neighbor priority.	Supports read and write operations. Only neighbors on an NBMA network support the write operation.
ospfv3CfgNbrRowStatus (1.3.6.1.2.1.191.1.10.1.6)	read-create	RowStatus	active(1), notInService(2), notReady(3), createAndGo(4), createAndWait(5), destroy(6)	Row status.	Supports only the read operation.

ospfv3VirtNbrTable

About this table

This table contains OSPFv3 virtual neighbor information.

Support for operations

Create	Edit/Modify	Delete	Read
Not supported	Not supported	Not supported	Supported

Columns

The table indexes are ospfv3VirtNbrArea and ospfv3VirtNbrRtrId.

Object (OID)	Access	Syntax	Value range	Description	Implementation
ospfv3VirtNbrArea (1.3.6.1.2.1.191.1.11.1.1)	not-accessible	Ospfv3AreaIdTC	Unsigned32 (0..'FFFFFFFF'h)	Area to which the virtual neighbor belongs.	As per the MIB.
ospfv3VirtNbrRtrId (1.3.6.1.2.1.191.1.11.1.2)	not-accessible	Ospfv3RouterIdTC	Unsigned32(1..'FFFFFFFF'h)	Router ID of the virtual neighbor.	As per the MIB.
ospfv3VirtNbrIfIndex (1.3.6.1.2.1.191.1.11.1.3)	read-only	InterfaceIndex	Integer32(1..2147483647)	Virtual interface index.	As per the MIB.
ospfv3VirtNbrIfInstId (1.3.6.1.2.1.191.1.11.1.4)	read-only	Ospfv3IfInstIdTC	Unsigned32(0..255)	Virtual interface instance ID.	As per the MIB.
ospfv3VirtNbrAddressType (1.3.6.1.2.1.191.1.11.1.5)	read-only	InetAddressType	unknown(0), ipv4(1), ipv6(2), ipv4z(3), ipv6z(4), dns(16)	Virtual neighbor address type.	As per the MIB.
ospfv3VirtNbrAddress (1.3.6.1.2.1.191.1.11.1.6)	read-only	InetAddress	OCTET STRING(0..255)	Virtual neighbor address.	As per the MIB.
ospfv3VirtNbrOptions (1.3.6.1.2.1.191.1.11.1.7)	read-only	Integer32	Standard MIB values.	Option field of the virtual neighbor.	As per the MIB.
ospfv3VirtNbrState (1.3.6.1.2.1.191.1.11.1.8)	read-only	INTEGER	down(1), attempt(2), init(3), twoWay(4), exchangeStart(5), exchange(6), loading(7), full(8)	State of the virtual neighbor.	As per the MIB.
ospfv3VirtNbrEvents (1.3.6.1.2.1.191.1.11.1.9)	read-only	Counter32	INTEGER(0..4294967295)	Number of virtual neighbor state changes.	As per the MIB.
ospfv3VirtNbrLsRetransQLen(1.3.6.1.2.1.191.1.11.1.10)	read-only	Gauge32	INTEGER(0..4294967295)	Retransmission queue length.	As per the MIB.
ospfv3VirtNbrHelloSuppressed (1.3.6.1.2.1.191.1.11.1.11)	read-only	TruthValue	true(1), false(2)	Whether hello packets are being suppressed to the virtual neighbor.	As per the MIB.
ospfv3VirtNbrIfId (1.3.6.1.2.1.191.1.11.1.12)	read-only	InterfaceIndex	Integer32(1..2147483647)	Neighbor interface ID.	As per the MIB.
ospfv3VirtNbrRestartHelperStatus (1.3.6.1.2.1.191.1.11.1.13)	read-only	INTEGER	notHelping(1), helping(2)	Whether the router is acting as a GR helper for the virtual neighbor.	As per the MIB.
ospfv3VirtNbrRestartHelperAge (1.3.6.1.2.1.191.1.11.1.14)	read-only	Ospfv3UpToRefreshIntervalTC	Unsigned32 (1..1800)	Remaining time of the GR interval when the router is acting as a GR helper for the virtual neighbor.	As per the MIB.
ospfv3VirtNbrRestartHelperExitReason (1.3.6.1.2.1.191.1.11.1.15)	read-only	INTEGER	none(1), inProgress(2), completed(3), timedOut(4), topologyChanged(5)	GR helper exit reason.	As per the MIB.

ospfv3AreaAggregateTable

About this table

This table contains information about configured OSPFv3 summary routes.

Support for operations

Create	Edit/Modify	Delete	Read
Not supported	Supported	Not supported	Supported

Columns

The table indexes are ospfv3AreaAggregateAreaID, ospfv3AreaAggregateAreaLsdbType, ospfv3AreaAggregatePrefixType, ospfv3AreaAggregatePrefix, and ospfv3AreaAggregatePrefixLength.

Object (OID)	Access	Syntax	Value range	Description	Implementation
ospfv3AreaAggregateAreaID (1.3.6.1.2.1.191.1.12.1.1)	not-accessible	Ospfv3AreaIdTC	Unsigned32 (0..'FFFFFFFF'h)	Area where the summary route resides.	As per the MIB.
ospfv3AreaAggregateAreaLsdbType (1.3.6.1.2.1.191.1.12.1.2)	not-accessible	INTEGER	interAreaPrefixLsa(8195), nssaExternalLsa(8199)	LSA type.	As per the MIB.
ospfv3AreaAggregatePrefixType (1.3.6.1.2.1.191.1.12.1.3)	not-accessible	InetAddressType	unknown(0), ipv4(1), ipv6(2), ipv4z(3), ipv6z(4), dns(16)	Summary network address type.	As per the MIB.
ospfv3AreaAggregatePrefix (1.3.6.1.2.1.191.1.12.1.4)	not-accessible	InetAddress	OCTET STRING(0..16)	Summary network address.	As per the MIB.
ospfv3AreaAggregatePrefixLength (1.3.6.1.2.1.191.1.12.1.5)	not-accessible	InetAddressPrefixLength	Unsigned32(3..128)	Summary network address length.	As per the MIB.
ospfv3AreaAggregateRowStatus (1.3.6.1.2.1.191.1.12.1.6)	read-create	RowStatus	active(1), notInService(2), notReady(3), createAndGo(4), createAndWait(5), destroy(6)	Row status.	Supports only the read operation.
ospfv3AreaAggregateEffect (1.3.6.1.2.1.191.1.12.1.7)	read-create	INTEGER	advertiseMatching(1), doNotAdvertiseMatching(2)	Whether subnets are included in the summary route.	Supports read and write operations.
ospfv3AreaAggregateRouteTag (1.3.6.1.2.1.191.1.12.1.8)	read-create	Unsigned32	Standard MIB values.	Tag information.	Supports read and write operations.

ospfv3VirtLinkLsdbTable (not supported)

About this table

This table contains OSPFv3 link-scope LSDB information.

Support for operations

Create	Edit/Modify	Delete	Read
Not supported	Not supported	Not supported	Supported

Columns

The table indexes are ospfv3VirtLinkLsdbIfAreaId, ospfv3VirtLinkLsdbIfNeighbor, ospfv3VirtLinkLsdbType, ospfv3VirtLinkLsdbRouterId, and ospfv3VirtLinkLsdbLsid.

Object (OID)	Access	Syntax	Value range	Description	Implementation
ospfv3VirtLinkLsdbIfAreaId (1.3.6.1.2.1.191.1.13.1.1)	not-accessible	Ospfv3AreaIdTC	Unsigned32 (0..'FFFFFFFF'h)	ID of the area to which the virtual link belongs.	As per the MIB.
ospfv3VirtLinkLsdbIfNeighbor(1.3.6.1.2.1.191.1.13.1.2)	not-accessible	Ospfv3RouterIdTC	Unsigned32(1..'FFFFFFFF'h)	Router ID of the virtual neighbor.	As per the MIB.
ospfv3VirtLinkLsdbType (1.3.6.1.2.1.191.1.13.1.3)	not-accessible	Unsigned32	Unsigned32(0..'FFFFFFFF'h)	LSA type.	As per the MIB.
ospfv3VirtLinkLsdbRouterId (1.3.6.1.2.1.191.1.13.1.4)	not-accessible	Ospfv3RouterIdTC	Unsigned32(1..'FFFFFFFF'h)	Router ID of the device that generates the LSA.	As per the MIB.
ospfv3VirtLinkLsdbLsid (1.3.6.1.2.1.191.1.13.1.5)	not-accessible	Ospfv3LsIdTC	Unsigned32 (1..'FFFFFFFF'h)	LSA LS ID.	As per the MIB.
ospfv3VirtLinkLsdbSequence(1.3.6.1.2.1.191.1.13.1.6)	read-only	Ospfv3LsaSequenceTC	Integer32	LSA sequence number.	As per the MIB.
ospfv3VirtLinkLsdbAge (1.3.6.1.2.1.191.1.13.1.7)	read-only	Ospfv3LsaAgeTC	Unsigned32 (0..3600)	LSA age.	As per the MIB.
ospfv3VirtLinkLsdbChecksum(1.3.6.1.2.1.191.1.13.1.8)	read-only	Integer32	Standard MIB values.	LSA checksum information.	As per the MIB.
ospfv3VirtLinkLsdbAdvertisement (1.3.6.1.2.1.191.1.13.1.9)	read-only	OCTET STRING	OCTET STRING(1..65535)	LSA advertisement content.	As per the MIB.
ospfv3VirtLinkLsdbTypeKnown (1.3.6.1.2.1.191.1.13.1.10)	read-only	TruthValue	true(1), false(2)	Whether the LSA type is known.	As per the MIB.

Notifications

ospfv3VirtIfStateChange

Basic information

OID	Event	Type	Severity	Recovery notification	Default status
1.3.6.1.2.1.191.0.1	Virtual interface state changes.	Informational	-	-	ON

Description

A notification sent when the state of a virtual interface changes to Point-to-Point or changes from Point-to-Point to another state. To reduce unnecessary notifications caused by virtual interface up events, no virtual interface state change notification will be sent within 2 times the dead interval since the virtual interface state changes to a value other than DOWN.

Status control

ON

CLI: Use the snmp-agent trap enable ospfv3 virtif-state-change command.

OFF

CLI: Use the undo snmp-agent trap enable ospfv3 virtif-state-change command.

Objects

OID (object name)

Description

Index

Type

Value range

1.3.6.1.2.1.191.1.1.1

(ospfv3RouterId)

Unique identifier of a router in an AS.

Ospfv3RouterIdTC

Unsigned32 (1..'FFFFFFFF'h)

1.3.6.1.2.1.191.1.8.1.9

(ospfv3VirtIfState)

Virtual interface state.

INTEGER

down(1)

pointToPoint(4)

This table does not contain indexes. For information about the index or indexes of a MIB object instance in an SNMP variable binding, see the section for that MIB object.

Recommended action

No action is required.

ospfv3NbrStateChange

Basic information

OID	Event	Type	Severity	Recovery notification	Default status
1.3.6.1.2.1.191.0.2	Neighbor state changes.	Informational	-	-	ON

Description

For DR and BDR, this notification is sent when the state of a neighbor changes to FULL or changes from FULL to another state. For DRother, this notification is sent when the state of a neighbor changes to 2-way or changes from 2-way to another state.

To reduce unnecessary notifications caused by interface up events, no neighbor state change notification will be sent within 2 times the dead interval since the interface state changes to a value other than DOWN.

Status control

ON

CLI: Use the snmp-agent trap enable ospfv3 neighbor-state-change command.

OFF

CLI: Use the undo snmp-agent trap enable ospfv3 neighbor-state-change command.

Objects

OID (object name)

Description

Index

Type

Value range

1.3.6.1.2.1.191.1.1.1

(ospfv3RouterId)

Unique identifier of a router in an AS.

Ospfv3RouterIdTC

Unsigned32 (1..'FFFFFFFF'h)

1.3.6.1.2.1.191.1.9.1.8

(ospfv3NbrState)

Neighbor state.

INTEGER

down(1)

attempt(2)

init(3)

twoWay(4)

exchangeStart(5)

exchange(6)

loading(7)

full(8)

This table does not contain indexes. For information about the index or indexes of a MIB object instance in an SNMP variable binding, see the section for that MIB object.

Recommended action

Check whether the interface state has changed.

ospfv3VirtNbrStateChange

Basic information

OID	Event	Type	Severity	Recovery notification	Default status
1.3.6.1.2.1.191.0.3	Virtual neighbor state changes.	Informational	-	-	ON

Description

A notification sent when the state of a virtual neighbor changes to FULL or changes from FULL to another state. To reduce unnecessary notifications caused by virtual interface up events, no virtual neighbor state change notification will be sent within 2 times the dead interval since the virtual interface state changes to a value other than DOWN.

Status control

ON

CLI: Use the snmp-agent trap enable ospfv3 virtneighbor-state-change command.

OFF

CLI: Use the undo snmp-agent trap enable ospfv3 virtneighbor-state-change command.

Objects

OID (object name)

Description

Index

Type

Value range

1.3.6.1.2.1.191.1.1.1

(ospfv3RouterId)

Unique identifier of a router in an AS.

Ospfv3RouterIdTC

Unsigned32 (1..'FFFFFFFF'h)

1.3.6.1.2.1.191.1.11.1.8

(ospfv3VirtNbrState)

Virtual neighbor state.

INTEGER

down(1)

attempt(2)

init(3)

twoWay(4)

exchangeStart(5)

exchange(6)

loading(7)

full(8)

This table does not contain indexes. For information about the index or indexes of a MIB object instance in an SNMP variable binding, see the section for that MIB object.

Recommended action

No action is required.

ospfv3IfConfigError

Basic information

OID	Event	Type	Severity	Recovery notification	Default status
1.3.6.1.2.1.191.0.4	Interface configuration error.	Informational	-	-	ON

Description

A notification sent when a non-virtual interface receives a packet from another router with mismatched configuration.

Status control

ON

CLI: Use the snmp-agent trap enable ospfv3 if-cfg-error command.

OFF

CLI: Use the undo snmp-agent trap enable ospfv3 if-cfg-error command.

Objects

OID (object name)	Description	Index	Type	Value range
1.3.6.1.2.1.191.1.1.1 (ospfv3RouterId)	Unique identifier of a router in an AS.	No	Ospfv3RouterIdTC	Unsigned32 (1..'FFFFFFFF'h)
1.3.6.1.2.1.191.1.7.1.12 (ospfv3IfState)	Interface state.	No	INTEGER	down(1) loopback(2) waiting(3) pointToPoint(4) designatedRouter(5) backupDesignatedRouter(6) otherDesignatedRouter(7) standby(8)
1.3.6.1.2.1.191.1.14.3 (ospfv3PacketSrc)	IPv6 packet that cannot be identified by a neighbor.	No	InetAddressIPv6	OCTET STRING (16)
1.3.6.1.2.1.191.1.14.1 (ospfv3ConfigErrorType)	OSPFv3 configuration error type.	No	INTEGER	badVersion(1) areaMismatch(2) unknownNbmaNbr(3) unknownVirtualNbr(4) helloIntervalMismatch(5) deadIntervalMismatch(6) optionMismatch(7) mtuMismatch(8) duplicateRouterId(9) noError(10)
1.3.6.1.2.1.191.1.14.2 (ospfv3PacketType)	OSPFv3 data packet type.	No	INTEGER	hello(1) dbDescript(2) lsReq(3) lsUpdate(4) lsAck(5) nullPacket(6)

This table does not contain indexes. For information about the index or indexes of a MIB object instance in an SNMP variable binding, see the section for that MIB object.

Recommended action

Verify that the parameters configured on the interface are consistent with parameters in the hello packets.

ospfv3VirtIfConfigError

Basic information

OID	Event	Type	Severity	Recovery notification	Default status
1.3.6.1.2.1.191.0.5	Virtual interface configuration error.	Error	Warning	-	ON

Description

A notification sent when a virtual interface receives a packet from another router with mismatched configuration.

Status control

ON

CLI: Use the snmp-agent trap enable ospfv3 virtif-cfg-error command.

OFF

CLI: Use the undo snmp-agent trap enable ospfv3 virtif-cfg-error command.

Objects

OID (object name)	Description	Index	Type	Value range
1.3.6.1.2.1.191.1.1.1 (ospfv3RouterId)	Unique identifier of a router in an AS.	No	Ospfv3RouterIdTC	Unsigned32 (1..'FFFFFFFF'h)
1.3.6.1.2.1.191.1.8.1.9 (ospfv3VirtIfState)	Virtual interface state.	No	INTEGER	down(1) pointToPoint(4)
1.3.6.1.2.1.191.1.14.1 (ospfv3ConfigErrorType)	OSPFv3 configuration error type.	No	INTEGER	badVersion(1) areaMismatch(2) unknownNbmaNbr(3) unknownVirtualNbr(4) helloIntervalMismatch(5) deadIntervalMismatch(6) optionMismatch(7) mtuMismatch(8) duplicateRouterId(9) noError(10)
1.3.6.1.2.1.191.1.14.2 (ospfv3PacketType)	OSPFv3 data packet type.	No	INTEGER	hello(1) dbDescript(2) lsReq(3) lsUpdate(4) lsAck(5) nullPacket(6)

This table does not contain indexes. For information about the index or indexes of a MIB object instance in an SNMP variable binding, see the section for that MIB object.

Recommended action

Verify that the parameters configured on the interface are consistent with parameters in the hello packets.

ospfv3IfRxBadPacket

Basic information

OID	Event	Type	Severity	Recovery notification	Default status
1.3.6.1.2.1.191.0.6	A non-virtual interface receives an error packet.	Error	Warning	-	ON

Description

A notification sent when a non-virtual interface receives an OSPFv3 packet that cannot be parsed.

Status control

ON

CLI: Use the snmp-agent trap enable ospfv3 if-bad-pkt command.

OFF

CLI: Use the undo snmp-agent trap enable ospfv3 if-bad-pkt command.

Objects

OID (object name)	Description	Index	Type	Value range
1.3.6.1.2.1.191.1.1.1 (ospfv3RouterId)	Unique identifier of a router in an AS.	No	Ospfv3RouterIdTC	Unsigned32 (1..'FFFFFFFF'h)
1.3.6.1.2.1.191.1.7.1.12 (ospfv3IfState)	Interface state.	No	INTEGER	down(1) loopback(2) waiting(3) pointToPoint(4) designatedRouter(5) backupDesignatedRouter(6) otherDesignatedRouter(7) standby(8)
1.3.6.1.2.1.191.1.14.3 (ospfv3PacketSrc)	IPv6 packet that cannot be identified by the neighbor.	No	InetAddressIPv6	OCTET STRING (16)
1.3.6.1.2.1.191.1.14.2 (ospfv3PacketType)	OSPFv3 data packet type.	No	INTEGER	hello(1) dbDescript(2) lsReq(3) lsUpdate(4) lsAck(5) nullPacket(6)

This table does not contain indexes. For information about the index or indexes of a MIB object instance in an SNMP variable binding, see the section for that MIB object.

Recommended action

Verify that the parameters configured on the interface are consistent with parameters in the hello packets.

ospfv3VirtIfRxBadPacket

Basic information

OID	Event	Type	Severity	Recovery notification	Default status
1.3.6.1.2.1.191.0.7	A virtual interface receives an error packet.	Informational	-	-	ON

Description

A notification sent when a virtual interface receives an OSPFv3 packet that cannot be parsed.

Status control

ON

CLI: Use the snmp-agent trap enable ospfv3 virtif-bad-pkt command.

OFF

CLI: Use the undo snmp-agent trap enable ospfv3 virtif-bad-pkt command.

Objects

OID (object name)	Description	Index	Type	Value range
1.3.6.1.2.1.191.1.1.1 (ospfv3RouterId)	Unique identifier of a router in an AS.	No	Ospfv3RouterIdTC	Unsigned32 (1..'FFFFFFFF'h)
1.3.6.1.2.1.191.1.8.1.9 (ospfv3VirtIfState)	Virtual interface state.	No	INTEGER	down(1) pointToPoint(4)
1.3.6.1.2.1.191.1.14.2 (ospfv3PacketType)	OSPFv3 data packet type.	No	INTEGER	hello(1) dbDescript(2) lsReq(3) lsUpdate(4) lsAck(5) nullPacket(6)

This table does not contain indexes. For information about the index or indexes of a MIB object instance in an SNMP variable binding, see the section for that MIB object.

Recommended action

No action is required.

ospfv3IfStateChange

Basic information

OID	Event	Type	Severity	Recovery notification	Default status
1.3.6.1.2.1.191.0.10	Interface state changes.	Error	Warning	-	ON

Description

A notification sent when the state of a non-virtual interface changes from DR to Down or changes to the Point-to-Point, DR, BDR, or Drother state.

Status control

ON

CLI: Use the snmp-agent trap enable ospfv3 if-state-change command.

OFF

CLI: Use the undo snmp-agent trap enable ospfv3 if-state-change command.

Objects

OID (object name)

Description

Index

Type

Value range

1.3.6.1.2.1.191.1.1.1

(ospfv3RouterId)

Unique identifier of a router in an AS.

Ospfv3RouterIdTC

Unsigned32 (1..'FFFFFFFF'h)

1.3.6.1.2.1.191.1.7.1.12

(ospfv3IfState)

Interface state.

INTEGER

down(1)

loopback(2)

waiting(3)

pointToPoint(4)

designatedRouter(5)

backupDesignatedRouter(6)

otherDesignatedRouter(7)

standby(8)

This table does not contain indexes. For information about the index or indexes of a MIB object instance in an SNMP variable binding, see the section for that MIB object.

Recommended action

No action is required.

ospfv3NssaTranslatorStatusChange

Basic information

OID	Event	Type	Severity	Recovery notification	Default status
1.3.6.1.2.1.191.0.11	A router's ability to translate type-7 LSAs into type-5 LSAs changes.	Error	Warning	-	ON

Description

A notification sent when a router's ability to translate type-7 LSAs into type-5 LSAs changes.

Status control

ON

CLI: Use the snmp-agent trap enable ospfv3 nssatranslator-status-change command.

OFF

CLI: Use the undo snmp-agent trap enable ospfv3 nssatranslator-status-change command.

Objects

OID (object name)

Description

Index

Type

Value range

1.3.6.1.2.1.191.1.1.1

(ospfv3RouterId)

Unique identifier of a router in an AS.

Ospfv3RouterIdTC

Unsigned32 (1..'FFFFFFFF'h)

1.3.6.1.2.1.191.1.2.1.12

(ospfv3AreaNssaTranslatorState)

Method for the NSSA ABR to become capable of translating Type-7 LSAs into Type-5 LSAs.

INTEGER

enabled(1)

elected(2)

disabled(3)

This table does not contain indexes. For information about the index or indexes of a MIB object instance in an SNMP variable binding, see the section for that MIB object.

Recommended action

No action is required.

ospfv3RestartStatusChange

Basic information

OID	Event	Type	Severity	Recovery notification	Default status
1.3.6.1.2.1.191.0.12	GR restarter state changes.	Error	Warning	-	ON

Description

A notification sent when the GR restarter state changes.

Status control

ON

CLI: Use the snmp-agent trap enable ospfv3 grrestarter-status-change command.

OFF

CLI: Use the undo snmp-agent trap enable ospfv3 grrestarter-status-change command.

Objects

OID (object name)	Description	Index	Type	Value range
1.3.6.1.2.1.191.1.1.1 (ospfv3RouterId)	Unique identifier of a router in an AS.	No	Ospfv3RouterIdTC	Unsigned32 (1..'FFFFFFFF'h)
1.3.6.1.2.1.191.1.1.18 (ospfv3RestartStatus)	GR restarter state.	No	INTEGER	notRestarting(1) plannedRestart(2) unplannedRestart(3)
1.3.6.1.2.1.191.1.1.16 (ospfv3RestartInterval)	GR timeout interval.	No	Ospfv3UpToRefreshIntervalTC	Unsigned32 (40..1800)
1.3.6.1.2.1.191.1.1.20 (ospfv3RestartExitReason)	Reason why the device exited GR restarter state.	No	INTEGER	none(1) inProgress(2) completed(3) timedOut(4) topologyChanged(5)

This table does not contain indexes. For information about the index or indexes of a MIB object instance in an SNMP variable binding, see the section for that MIB object.

Recommended action

No action is required.

ospfv3NbrRestartHelperStatusChange

Basic information

OID	Event	Type	Severity	Recovery notification	Default status
1.3.6.1.2.1.191.0.13	The GR helper state of a neighbor changes.	Error	Warning	-	ON

Description

A notification sent when a neighbor enters or exits GR helper state.

Status control

ON

CLI: Use the snmp-agent trap enable ospfv3 grhelper-status-change command.

OFF

CLI: Use the undo snmp-agent trap enable ospfv3 grhelper-status-change command.

Objects

OID (object name)	Description	Index	Type	Value range
1.3.6.1.2.1.191.1.1.1 (ospfv3RouterId)	Unique identifier of a router in an AS.	No	Ospfv3RouterIdTC	Unsigned32 (1..'FFFFFFFF'h)
1.3.6.1.2.1.191.1.9.1.13 (ospfv3NbrRestartHelperStatus)	GR helper state of the neighbor.	No	INTEGER	notHelping(1) helping(2)
1.3.6.1.2.1.191.1.9.1.14 (ospfv3NbrRestartHelperAge)	GR helper aging timer.	No	Ospfv3UpToRefreshIntervalTC	Unsigned32 (1..1800)
1.3.6.1.2.1.191.1.9.1.15 (ospfv3NbrRestartHelperExitReason)	Reason why the neighbor exited GR helper state.	No	INTEGER	none(1) inProgress(2) completed(3) timedOut(4) topologyChanged(5)

This table does not contain indexes. For information about the index or indexes of a MIB object instance in an SNMP variable binding, see the section for that MIB object.

Recommended action

No action is required.

ospfv3VirtNbrRestartHelperStatusChange

Basic information

OID	Event	Type	Severity	Recovery notification	Default status
1.3.6.1.2.1.191.0.14	The GR helper state of a virtual neighbor changes.	Error	Warning	-	ON

Description

A notification sent when a virtual neighbor enters or exits GR helper state.

Status control

ON

CLI: Use the snmp-agent trap enable ospfv3 rejected-adjacency command.

OFF

CLI: Use the undo snmp-agent trap enable ospfv3 rejected-adjacency command.

Objects

OID (object name)	Description	Index	Type	Value range
1.3.6.1.2.1.191.1.1.1 (ospfv3RouterId)	Unique identifier of a router in an AS.	No	Ospfv3RouterIdTC	Unsigned32 (1..'FFFFFFFF'h)
1.3.6.1.2.1.191.1.11.1.13 (ospfv3VirtNbrRestartHelperStatus)	GR helper state of the virtual neighbor.	No	INTEGER	notHelping(1) helping(2)
1.3.6.1.2.1.191.1.11.1.14 (ospfv3VirtNbrRestartHelperAge)	Remaining time of the GR interval when the router is acting as a GR helper for the virtual neighbor.	No	Ospfv3UpToRefreshIntervalTC	Unsigned32 (1..1800)
1.3.6.1.2.1.191.1.11.1.15 (ospfv3VirtNbrRestartHelperExitReason)	Reason why the virtual neighbor exited GR helper state.	No	INTEGER	none(1) inProgress(2) completed(3) timedOut(4) topologyChanged(5)

This table does not contain indexes. For information about the index or indexes of a MIB object instance in an SNMP variable binding, see the section for that MIB object.

Recommended action

No action is required.

07-Layer 3 - IP Routing

About this table

Support for operations

Columns

ospfv3AsLsdbTable (not supported)

About this table

Support for operations

Columns

About this table

Support for operations

Columns

About this table

Support for operations

Columns

About this table

Support for operations

Columns

About this table

Support for operations

Columns

About this table

Support for operations

Columns

About this table

Support for operations

Columns

About this table

Support for operations

Columns

About this table

Support for operations

Columns

About this table

Support for operations

Columns

ospfv3VirtLinkLsdbTable (not supported)

About this table

Support for operations

Columns

Basic information

Description

Status control

ON

OFF

Objects

Recommended action

Basic information

Description

Status control

ON

OFF

Objects

Recommended action

Basic information

Description

Status control

ON

OFF

Objects

Recommended action

Basic information

Description

Status control

ON

OFF

Objects

Recommended action

Basic information

Description

Status control

ON

OFF

Objects

Recommended action

Basic information

Description

Status control

ON

OFF

Objects