OSPF-MIB

ospfRouterId (1.3.6.1.2.1.14.1.1)

read-write

RouterID

OCTET STRING (4)

Router ID that uniquely identifies a router in an AS.

Supports only the read operation.

ospfAdminStat (1.3.6.1.2.1.14.1.2)

read-write

Status

INTEGER{

enabled(1), disabled(2)

}

OSPF administrative state of the router. Enabled indicates at least one OSPF interface exists. Disabled indicates no OSPF interface exists.

Supports only the read operation.

ospfVersionNumber (1.3.6.1.2.1.14.1.3)

read-only

INTEGER

version2 (2)

Version number (2).

As per the MIB.

ospfAreaBdrRtrStatus (1.3.6.1.2.1.14.1.4)

read-only

TruthValue

true(1),

false(2)

Whether the router is an ABR.

As per the MIB.

ospfASBdrRtrStatus (1.3.6.1.2.1.14.1.5)

read-write

TruthValue

true(1),

false(2)

Whether the router is an ASBR.

Supports only the read operation.

ospfExternLsaCount (1.3.6.1.2.1.14.1.6)

read-only

Gauge32

INTEGER(0..4294967295)

Number of Type-5 LSAs.

As per the MIB.

ospfExternLsaCksumSum (1.3.6.1.2.1.14.1.7)

read-only

Integer32

Standard MIB values.

Sum of checksums in Type-5 LSAs.

As per the MIB.

ospfTOSSupport (1.3.6.1.2.1.14.1.8)

read-write

TruthValue

true(1),

false(2)

Whether ToS is supported.

Supports only the read operation.

ospfOriginateNewLsas (1.3.6.1.2.1.14.1.9)

read-only

Counter32

INTEGER(0..4294967295)

Number of new LSAs that have been originated. This number is incremented each time the router originates a new LSA.

As per the MIB.

ospfRxNewLsas (1.3.6.1.2.1.14.1.10)

read-only

Counter32

INTEGER(0..4294967295)

Number of newly received LSAs, excluding self-originated LSAs.

As per the MIB.

ospfExtLsdbLimit (1.3.6.1.2.1.14.1.11)

read-write

Integer32

Integer32(-1..'7FFFFFFF'h)

Maximum number of non-default ASEs in the LSDB. A value of -1 indicates no limit.

The value takes -1, or is in the range of 1 to 1000000.

ospfMulticastExtensions (1.3.6.1.2.1.14.1.12)

read-write

Integer32

Standard MIB values.

Whether the router is multicast capable. Bit 0 indicates intra-area multicast; bit 1 indicates inter-area multicast; bit 2 indicates inter-AS multicast. The value can be 0, 1, 3, 5, and 7. The default value is 0.

Supports only the read operation.

ospfExitOverflowInterval (1.3.6.1.2.1.14.1.13)

read-write

PositiveInteger

Integer32(0..'7FFFFFFF'h)

Time that the router takes to leave the OverflowState. 0 indicates the router does not leave the OverflowState until it is restarted.

As per the MIB.

ospfDemandExtensions (1.3.6.1.2.1.14.1.14)

read-write

TruthValue

true(1),

false(2)

Support for demand routing.

Supports only the read operation.

ospfRFC1583Compatibility 

(1.3.6.1.2.1.14.1.15)

read-write

TruthValue

true(1),

false(2)

Compatibility with RFC 1583.

When compatibility is enabled, only cost will be used when choosing among multiple ASE LSAs advertising the same destination.

When compatibility is disabled, preference will be used first.

As per the MIB.

ospfOpaqueLsaSupport 

(1.3.6.1.2.1.14.1.16)

read-only

TruthValue

true(1),

false(2)

Support for Opaque LSAs.

As per the MIB.

ospfReferenceBandwidth

(1.3.6.1.2.1.14.1.17)

read-write

Unsigned32

Standard MIB values.

Reference bandwidth in Kb/s for calculating the interface cost.

When the value is divided by 1000, the decimal number will be ignored.

ospfRestartSupport

(1.3.6.1.2.1.14.1.18)

read-write

INTEGER

none (1),

plannedOnly (2),

plannedAndUnplanned (3)

Support for GR.

If the value changes from 1 to 2 or 3, IETF GR is supported.

If the value changes between 2 and 3, the original GR type remains unchanged.

ospfRestartInterval

(1.3.6.1.2.1.14.1.19)

read-write

Integer32

Integer32(1..1800)

Graceful restart timeout interval.

Value range: 40 to 1800.

ospfRestartStrictLsaChecking

(1.3.6.1.2.1.14.1.20)

read-write

TruthValue

true(1),

false(2)

Whether the strict LSA checking capability is enabled for GR.

As per the MIB.

ospfRestartStatus

(1.3.6.1.2.1.14.1.21)

read-only

INTEGER

notRestarting (1),

plannedRestart (2),

unplannedRestart (3)

Graceful restart state.

As per the MIB.

ospfRestartAge

(1.3.6.1.2.1.14.1.22)

read-only

Unsigned32

Standard MIB values.

Remaining time for the current graceful restart

As per the MIB.

ospfRestartExitReason

(1.3.6.1.2.1.14.1.23)

read-only

INTEGER

none (1),

inProgress (2),

completed (3),

timedOut (4),

topologyChanged (5)

GR exit reason.

As per the MIB.

ospfAsLsaCount

(1.3.6.1.2.1.14.1.24)

read-only

Gauge32

INTEGER(0..4294967295)

Number of AS-scope LSAs.

As per the MIB.

ospfAsLsaCksumSum

(1.3.6.1.2.1.14.1.25)

read-only

Unsigned32

Standard MIB values.

Sum of AS-scope LSA checksums.

As per the MIB.

ospfStubRouterSupport

(1.3.6.1.2.1.14.1.26)

read-only

TruthValue

true(1),

false(2)

Support for stub router.

As per the MIB.

ospfStubRouterAdvertisement(1.3.6.1.2.1.14.1.27)

read-write

INTEGER

doNotAdvertise (1),

advertise(2)

Whether to advertise stub router LSAs.

As per the MIB.

ospfDiscontinuityTime

(1.3.6.1.2.1.14.1.28)

read-only

TimeStamp

TimeTicks

Most recent system startup time.

As per the MIB.

Not supported

Supported

Not supported

Supported

ospfAreaId (1.3.6.1.2.1.14.2.1.1)

read-only

AreaID

OCTET STRING (4)

Area ID, a 32-bit integer that uniquely identifies an area.

As per the MIB.

ospfAuthType (1.3.6.1.2.1.14.2.1.2)

read-create

OspfAuthenticationType

none (0),

simplePassword (1),

md5 (2)

Authentication type.

Supports only the read operation.

ospfImportAsExtern (1.3.6.1.2.1.14.2.1.3)

read-create

INTEGER

importExternal(1),

importNoExternal (2), importNssa (3)

Area type, stub, NSSA, or common area.

Supports only the read operation.

ospfSpfRuns (1.3.6.1.2.1.14.2.1.4)

read-only

Counter32

INTEGER(0..4294967295)

Time of route calculations in the area.

As per the MIB.

ospfAreaBdrRtrCount (1.3.6.1.2.1.14.2.1.5)

read-only

Gauge32

INTEGER(0..4294967295)

Number of reachable ABRs in the area.

As per the MIB.

ospfAsBdrRtrCount (1.3.6.1.2.1.14.2.1.6)

read-only

Gauge32

INTEGER(0..4294967295)

Number of reachable ASBRs in the area.

As per the MIB.

ospfAreaLsaCount (1.3.6.1.2.1.14.2.1.7)

read-only

Gauge32

INTEGER(0..4294967295)

Number of LSAs in the LSDB of the area.

As per the MIB.

ospfAreaLsaCksumSum (1.3.6.1.2.1.14.2.1.8)

read-only

Integer32

Standard MIB values.

Sum of the checksums of the LSAs in the area.

As per the MIB.

ospfAreaSummary (1.3.6.1.2.1.14.2.1.9)

read-create

INTEGER

noAreaSummary (1),

sendAreaSummary (2)

Whether to send summary LSAs to stub and NSSA areas.

Supports only the read and write operations.

ospfAreaStatus (1.3.6.1.2.1.14.2.1.10)

read-create

RowStatus

active(1),

notInService(2),

notReady(3),

createAndGo(4),

createAndWait(5),

destroy(6)

Area state.

Supports only the read operation.

ospfAreaNssaTranslatorRole

(1.3.6.1.2.1.14.2.1.11)

read-create

INTEGER

always (1),

candidate (2)

Ability of the NSSA ABR to translate Type-7 LSAs into Type-5 LSAs.

Supports only the read and write operations.

ospfAreaNssaTranslatorState

(1.3.6.1.2.1.14.2.1.12)

read-only

INTEGER

enabled (1),

elected (2),

disabled (3)

Method for the NSSA ABR to become capable of translating Type-7 LSAs into Type-5 LSAs.

As per the MIB.

ospfAreaNssaTranslatorStabilityInterval(1.3.6.1.2.1.14.2.1.13)

read-create

PositiveInteger

Integer32(0..'7FFFFFFF'h)

Time for the elected translator to continue to perform translation.

Supports only the read and write operations.

Value range: 0 to 900.

ospfAreaNssaTranslatorEvents (1.3.6.1.2.1.14.2.1.14)

read-only

Counter32

INTEGER(0..4294967295)

Number of translator state changes.

As per the MIB.

Not supported

Supported

Not supported

Supported

ospfStubAreaId (1.3.6.1.2.1.14.3.1.1)

read-only

AreaID

OCTET STRING (4)

Area ID, a 32-bit integer that uniquely identifies a stub area.

As per the MIB.

ospfStubTOS (1.3.6.1.2.1.14.3.1.2)

read-only

TOSType

Integer32 (0..30)

Type of Service associated with the cost.

As per the MIB.

ospfStubMetric (1.3.6.1.2.1.14.3.1.3)

read-create

BigMetric

Integer32(0..'FFFFFF'h)

Default cost of generated default LSAs, including Type-3 and Type-7 LSAs.

Supports only the read and write operations.

Value range: 0 to 16777214.

ospfStubStatus (1.3.6.1.2.1.14.3.1.4)

read-create

RowStatus

active(1),

notInService(2),

notReady(3),

createAndGo(4),

createAndWait(5),

destroy(6)

Area state.

Supports only the read operation.

ospfStubMetricType (1.3.6.1.2.1.14.3.1.5)

read-create

INTEGER

ospfMetric (1),

comparableCost (2),

nonComparable (3)

Cost type.

Supports only the read operation.

Not supported

Not supported

Not supported

Supported

ospfLsdbAreaId (1.3.6.1.2.1.14.4.1.1)

read-only

AreaID

OCTET STRING (4)

ID of the area from which the LSA was received.

As per the MIB.

ospfLsdbType (1.3.6.1.2.1.14.4.1.2)

read-only

INTEGER

routerLink (1),

networkLink (2),

summaryLink (3),

asSummaryLink (4),

asExternalLink (5),

multicastLink (6), nssaExternalLink (7),

areaOpaqueLink (10)

LSA type.

Type-5 LSAs are not displayed.

As per the MIB.

ospfLsdbLsid (1.3.6.1.2.1.14.4.1.3)

read-only

IpAddress

OCTET STRING (4)

LS ID

As per the MIB.

ospfLsdbRouterId (1.3.6.1.2.1.14.4.1.4)

read-only

RouterID

OCTET STRING (4)

Router ID of the LSA originator.

As per the MIB.

ospfLsdbSequence (1.3.6.1.2.1.14.4.1.5)

read-only

Integer32

Standard MIB values.

LSA sequence number.

As per the MIB.

ospfLsdbAge (1.3.6.1.2.1.14.4.1.6)

read-only

Integer32

Standard MIB values.

LSA age.

As per the MIB.

ospfLsdbChecksum (1.3.6.1.2.1.14.4.1.7)

read-only

Integer32

Standard MIB values.

Checksum of the complete contents of the LSA except the age field.

As per the MIB.

ospfLsdbAdvertisement (1.3.6.1.2.1.14.4.1.8)

read-only

OCTET STRING

OCTET STRING (1..65535)

Complete LSA information, including the LSA header.

As per the MIB.

Not supported

Supported

Not supported

Supported

ospfHostIpAddress (1.3.6.1.2.1.14.6.1.1)

read-only

IpAddress

OCTET STRING (4)

IP address of the host route.

As per the MIB.

ospfHostTOS (1.3.6.1.2.1.14.6.1.2)

read-only

TOSType

Integer32 (0..30)

Type of Service.

As per the MIB.

ospfHostMetric (1.3.6.1.2.1.14.6.1.3)

read-create

Metric

Integer32(0..'FFFF'h)

Host route cost.

Supports only the read and write operations.

Value range: 1 to 65535.

ospfHostStatus (1.3.6.1.2.1.14.6.1.4)

read-create

RowStatus

active(1),

notInService(2),

notReady(3),

createAndGo(4),

createAndWait(5),

destroy(6)

Host route state.

Supports only the read operation.

ospfHostAreaID (1.3.6.1.2.1.14.6.1.5)

read-only

AreaID

OCTET STRING (4)

ID of the area to which the host route belongs.

As per the MIB.

ospfHostCfgAreaID

(1.3.6.1.2.1.14.6.1.6)

read-create

AreaID

OCTET STRING (4)

Configured area ID of the host route.

Supports only the read operation.

Not supported

Supported

Not supported

Supported

ospfIfIpAddress (1.3.6.1.2.1.14.7.1.1)

read-only

IpAddress

OCTET STRING (4)

Interface IP address.

As per the MIB.

ospfAddressLessIf (1.3.6.1.2.1.14.7.1.2)

read-only

InterfaceIndexOrZero

Integer32(0..2147483647)

Used to distinguish interface instances with addresses configured and those without addresses configured.

As per the MIB.

ospfIfAreaId (1.3.6.1.2.1.14.7.1.3)

read-create

AreaID

OCTET STRING (4)

Area ID.

Supports only the read operation.

ospfIfType (1.3.6.1.2.1.14.7.1.4)

read-create

INTEGER

broadcast(1),

nbma (2),

pointToPoint (3),

pointToMultipoint (5)

OSPF interface type.

Supports only the read and write operations.

Loopback interfaces do not support the write operation.

ospfIfAdminStat (1.3.6.1.2.1.14.7.1.5)

read-create

Status

INTEGER{

enabled(1), disabled(2)

}

Administrative state of the OSPF interface. It is enabled when the interface is active and disabled when the interface is in other state.

Supports only the read operation.

ospfIfRtrPriority (1.3.6.1.2.1.14.7.1.6)

read-create

DesignatedRouterPriority

Integer32(0..'FF'h)

Interface priority.

Supports only the read and write operations.

Loopback interfaces do not support the write operation.

ospfIfTransitDelay (1.3.6.1.2.1.14.7.1.7)

read-create

UpToMaxAge

Integer32(0..3600)

Delay time interval.

Supports only the read and write operations.

Value range: 1 to 3600.

Loopback interfaces do not support the write operation.

ospfIfRetransInterval (1.3.6.1.2.1.14.7.1.8)

read-create

UpToMaxAge

Integer32(0..3600)

Retransmission interval.

Supports only the read and write operations.

Value range: 1 to 3600.

Loopback interfaces do not support the write operation.

ospfIfHelloInterval (1.3.6.1.2.1.14.7.1.9)

read-create

HelloRange

Integer32(1..'FFFF'h)

Hello interval.

Supports only the read and write operations. Loopback interfaces do not support the write operation.

ospfIfRtrDeadInterval (1.3.6.1.2.1.14.7.1.10)

read-create

PositiveInteger

Integer32(0..'7FFFFFFF'h)

Dead interval.

Supports only the read and write operations.

Value range: 1 to 2147483647.

Loopback interfaces do not support the write operation.

ospfIfPollInterval (1.3.6.1.2.1.14.7.1.11)

read-create

PositiveInteger

Integer32(0..'7FFFFFFF'h)

Poll interval.

Supports only the read and write operations.

Value range: 1 to 2147483647.

Loopback interfaces do not support the write operation.

ospfIfState (1.3.6.1.2.1.14.7.1.12)

read-only

INTEGER

down (1),

loopback(2),

waiting(3),

pointToPoint (4),

designatedRouter(5),

backupDesignatedRouter (6),

otherDesignatedRouter (7)

Interface state.

As per the MIB.

ospfIfDesignatedRouter (1.3.6.1.2.1.14.7.1.13)

read-only

IpAddress

OCTET STRING (4)

DR address.

As per the MIB.

ospfIfBackupDesignatedRouter (1.3.6.1.2.1.14.7.1.14)

read-only

IpAddress

OCTET STRING (4)

BDR address.

As per the MIB.

ospfIfEvents (1.3.6.1.2.1.14.7.1.15)

read-only

Counter32

INTEGER(0..4294967295)

Number of interface state changes.

As per the MIB.

ospfIfAuthKey (1.3.6.1.2.1.14.7.1.16)

read-create

OCTET STRING

OCTET STRING (0..256)

Authentication key.

Supports only the read operation.

ospfIfStatus (1.3.6.1.2.1.14.7.1.17)

read-create

RowStatus

active(1),

notInService(2),

notReady(3),

createAndGo(4),

createAndWait(5),

destroy(6)

Row status.

Supports only the read operation.

ospfIfMulticastForwarding (1.3.6.1.2.1.14.7.1.18)

read-create

INTEGER

blocked(1),

multicast(2),

unicast (3)

Multicast forwarding way on the interface.

Supports only the read operation.

ospfIfDemand (1.3.6.1.2.1.14.7.1.19)

read-create

TruthValue

true(1),

false(2)

Whether the interface performs demand routing.

Supports only the read operation.

ospfIfAuthType (1.3.6.1.2.1.14.7.1.20)

read-create

OspfAuthenticationType

none (0),

simplePassword (1),

md5 (2)

Authentication type.

Supports only the read operation.

ospfIfLsaCount

(1.3.6.1.2.1.14.7.1.21)

read-only

Gauge32

INTEGER(0..4294967295)

Number of Type-9 LSAs.

As per the MIB.

ospfIfLsaCksumSum

(1.3.6.1.2.1.14.7.1.22)

read-only

Unsigned32

INTEGER(0..4294967295)

Sum of checksums in Type-9 LSAs.

As per the MIB.

ospfIfDesignatedRouterId

(1.3.6.1.2.1.14.7.1.23)

read-only

RouterID

OCTET STRING (4)

Router ID of the DR.

As per the MIB.

ospfIfBackupDesignatedRouterId(1.3.6.1.2.1.14.7.1.24)

read-only

RouterID

OCTET STRING (4)

Router ID of the BDR.

As per the MIB.

Not supported

Supported

Not supported

Supported

ospfIfMetricIpAddress (1.3.6.1.2.1.14.8.1.1)

read-only

IpAddress

OCTET STRING (4)

IP address of the OSPF interface.

As per the MIB.

ospfIfMetricAddressLessIf (1.3.6.1.2.1.14.8.1.2)

read-only

InterfaceIndexOrZero

Integer32(0..2147483647)

Used to distinguish interface instances with addresses configured and those without addresses configured.

As per the MIB.

ospfIfMetricTOS (1.3.6.1.2.1.14.8.1.3)

read-only

TOSType

Integer32 (0..30)

ToS cost being used.

As per the MIB.

ospfIfMetricValue (1.3.6.1.2.1.14.8.1.4)

read-create

Metric

Integer32(0..'FFFF'h)

Interface cost.

Supports only the read and write operations.

Value range for a loopback interface: 0 to 65535.

Value range for other interfaces: 1 to 65535.

ospfIfMetricStatus (1.3.6.1.2.1.14.8.1.5)

read-create

RowStatus

active(1),

notInService(2),

notReady(3),

createAndGo(4),

createAndWait(5),

destroy(6)

Row status.

Supports only the read operation.

Not supported

Supported

Not supported

Supported

ospfVirtIfAreaId (1.3.6.1.2.1.14.9.1.1)

read-only

AreaID

OCTET STRING (4)

ID of the area to which the virtual link belongs.

As per the MIB.

ospfVirtIfNeighbor (1.3.6.1.2.1.14.9.1.2)

read-only

RouterID

OCTET STRING (4)

Router ID of the virtual neighbor.

As per the MIB.

ospfVirtIfTransitDelay (1.3.6.1.2.1.14.9.1.3)

read-create

UpToMaxAge

Integer32(0..3600)

Delay interval.

Supports only the read and write operations.

Value range: 1 to 3600.

ospfVirtIfRetransInterval (1.3.6.1.2.1.14.9.1.4)

read-create

UpToMaxAge

Integer32(0..3600)

Retransmission interval.

Supports only the read and write operations.

Value range: 1 to 3600.

ospfVirtIfHelloInterval (1.3.6.1.2.1.14.9.1.5)

read-create

HelloRange

Integer32(1..'FFFF'h)

Hello interval.

Supports only the read and write operations.

Value range: 1 to 8192.

ospfVirtIfRtrDeadInterval (1.3.6.1.2.1.14.9.1.6)

read-create

PositiveInteger

Integer32(0..'7FFFFFFF'h)

Dead interval.

Supports only the read and write operations.

Value range: 1 to 32768.

ospfVirtIfState (1.3.6.1.2.1.14.9.1.7)

read-only

INTEGER

down (1), pointToPoint (4)

OSPF virtual interface state.

As per the MIB.

ospfVirtIfEvents (1.3.6.1.2.1.14.9.1.8)

read-only

Counter32

INTEGER(0..4294967295)

Number of state changes on the interface.

As per the MIB.

ospfVirtIfAuthKey (1.3.6.1.2.1.14.9.1.9)

read-create

OCTET STRING

OCTET STRING (0..256)

Authentication key.

Supports only the read operation.

ospfVirtIfStatus (1.3.6.1.2.1.14.9.1.10)

read-create

RowStatus

active(1),

notInService(2),

notReady(3),

createAndGo(4),

createAndWait(5),

destroy(6)

Row status.

Supports only the read operation.

ospfVirtIfAuthType (1.3.6.1.2.1.14.9.1.11)

read-create

OspfAuthenticationType

none (0),

simplePassword (1),

md5 (2)

Authentication type.

Supports only the read operation.

ospfVirtIfLsaCount

(1.3.6.1.2.1.14.9.1.12)

read-only

Gauge32

INTEGER(0..4294967295)

Number of Type-9 LSAs.

As per the MIB.

ospfVirtIfLsaCksumSum

(1.3.6.1.2.1.14.9.1.13)

read-only

Unsigned32

Standard MIB values.

Sum of checksums in Type-9 LSAs.

As per the MIB.

Not supported

Supported

Not supported

Supported

ospfNbrIpAddr (1.3.6.1.2.1.14.10.1.1)

read-only

IpAddress

OCTET STRING (4)

Neighbor IP address.

As per the MIB.

ospfNbrAddressLessIndex (1.3.6.1.2.1.14.10.1.2)

read-only

InterfaceIndexOrZero

Integer32(0..2147483647)

Set to 0 on an interface having an IP address, and set to the value of interface index in the Internet Standard MIB on an interface having no IP address.

As per the MIB.

ospfNbrRtrId (1.3.6.1.2.1.14.10.1.3)

read-only

RouterID

OCTET STRING (4)

Router ID of the neighbor.

As per the MIB.

ospfNbrOptions (1.3.6.1.2.1.14.10.1.4)

read-only

Integer32

Standard MIB values.

Option field of the neighbor.

As per the MIB.

ospfNbrPriority (1.3.6.1.2.1.14.10.1.5)

read-create

DesignatedRouterPriority

Integer32(0..'FF'h)

Priority of the neighbor.

Supports only the read and write operations. NBMA neighbors support only the write operations.

ospfNbrState (1.3.6.1.2.1.14.10.1.6)

read-only

INTEGER

down (1),

attempt (2),

init (3),

twoWay (4),

exchangeStart (5),

exchange (6),

loading (7),

full (8)

State of the relationship with the neighbor.

As per the MIB.

ospfNbrEvents (1.3.6.1.2.1.14.10.1.7)

read-only

Counter32

INTEGER(0..4294967295)

Number of neighbor state changes.

As per the MIB.

ospfNbrLsRetransQLen (1.3.6.1.2.1.14.10.1.8)

read-only

Gauge32

INTEGER(0..4294967295)

Retransmission queue length.

As per the MIB.

ospfNbmaNbrStatus (1.3.6.1.2.1.14.10.1.9)

read-create

RowStatus

active(1),

notInService(2),

notReady(3),

createAndGo(4),

createAndWait(5),

destroy(6)

Row status.

Supports only the read operation.

ospfNbmaNbrPermanence (1.3.6.1.2.1.14.10.1.10)

read-only

INTEGER

dynamic(1),

permanent(2)

Entry status.

The values dynamic and permanent refer to how the neighbor became known.

As per the MIB.

ospfNbrHelloSuppressed (1.3.6.1.2.1.14.10.1.11)

read-only

TruthValue

true(1),

false(2)

Whether hello packets are being suppressed to the neighbor.

As per the MIB.

ospfNbrRestartHelperStatus

(1.3.6.1.2.1.14.10.1.12)

read-only

INTEGER

notHelping(1),

helping (2)

Whether the router is acting as a GR helper for the neighbor.

As per the MIB.

ospfNbrRestartHelperAge

(1.3.6.1.2.1.14.10.1.13)

read-only

Unsigned32

Standard MIB values.

Remaining time of the GR interval when the router is acting as a GR helper for the neighbor.

As per the MIB.

ospfNbrRestartHelperExitReason(1.3.6.1.2.1.14.10.1.14)

read-only

INTEGER

none (1),inProgress (2),completed (3),timedOut (4),topologyChanged (5)

GR helper exit reason.

As per the MIB.

Not supported

Not supported

Not supported

Supported

ospfVirtNbrArea (1.3.6.1.2.1.14.11.1.1)

read-only

AreaID

OCTET STRING (4)

Transit area identifier.

As per the MIB.

ospfVirtNbrRtrId (1.3.6.1.2.1.14.11.1.2)

read-only

RouterID

OCTET STRING (4)

A 32-bit integer that uniquely identifies the neighboring router in the AS.

As per the MIB.

ospfVirtNbrIpAddr (1.3.6.1.2.1.14.11.1.3)

read-only

IpAddress

OCTET STRING (4)

IP address of the virtual neighbor.

As per the MIB.

ospfVirtNbrOptions (1.3.6.1.2.1.14.11.1.4)

read-only

Integer32

Standard MIB values.

Option field of the neighbor.

As per the MIB.

ospfVirtNbrState (1.3.6.1.2.1.14.11.1.5)

read-only

INTEGER

down (1),                    attempt (2),                 init (3),                   twoWay (4),                    exchangeStart (5),                   exchange (6),                   loading (7),                   full (8)

State of the virtual neighbor relationship.

As per the MIB.

ospfVirtNbrEvents (1.3.6.1.2.1.14.11.1.6)

read-only

Counter32

INTEGER(0..4294967295)

Number of virtual link state changes.

As per the MIB.

ospfVirtNbrLsRetransQLen (1.3.6.1.2.1.14.11.1.7)

read-only

Gauge32

INTEGER(0..4294967295)

Retransmission queue length.

As per the MIB.

ospfVirtNbrHelloSuppressed (1.3.6.1.2.1.14.11.1.8)

read-only

TruthValue

true(1),

false(2)

Whether hello packets are being suppressed to the neighbor.

As per the MIB.

ospfVirtNbrRestartHelperStatus (1.3.6.1.2.1.14.11.1.9)

read-only

INTEGER

notHelping(1),                             helping (2)

Whether the router is acting as a GR helper for the neighbor.

As per the MIB.

ospfVirtNbrRestartHelperAge(1.3.6.1.2.1.14.11.1.10)

read-only

Unsigned32

Standard MIB values.

Remaining time of the GR interval when the router is acting as a GR helper for the neighbor.

As per the MIB.

ospfVirtNbrRestartHelperExitReason (1.3.6.1.2.1.14.11.1.11)

read-only

INTEGER

none(1),

inProgress(2),

completed (3),

timedOut (4),

topologyChanged (5)

GR helper exit reason.

As per the MIB.

Not supported

Not supported

Not supported

Supported

ospfExtLsdbType (1.3.6.1.2.1.14.12.1.1)

read-only

INTEGER

asExternalLink(5)

LSA type.

As per the MIB.

ospfExtLsdbLsid (1.3.6.1.2.1.14.12.1.2)

read-only

IpAddress

OCTET STRING (4)

LS ID, an LS type specific field containing either a router ID or an IP address.

As per the MIB.

ospfExtLsdbRouterId (1.3.6.1.2.1.14.12.1.3)

read-only

RouterID

OCTET STRING (4)

A 32-bit number that uniquely identifies the originating router in the AS.

As per the MIB.

ospfExtLsdbSequence (1.3.6.1.2.1.14.12.1.4)

read-only

Integer32

Standard MIB values.

Sequence number.

As per the MIB.

ospfExtLsdbAge (1.3.6.1.2.1.14.12.1.5)

read-only

Integer32

Standard MIB values.

Age of the LSA.

As per the MIB.

ospfExtLsdbChecksum (1.3.6.1.2.1.14.12.1.6)

read-only

Integer32

Standard MIB values.

Checksum of the complete contents of the LSA, except the age field.

As per the MIB.

ospfExtLsdbAdvertisement (1.3.6.1.2.1.14.12.1.7)

read-only

OCTET STRING

OCTET STRING (36)

Complete LSA information.

As per the MIB.

Not supported

Supported

Not supported

Supported

ospfAreaAggregateAreaID (1.3.6.1.2.1.14.14.1.1)

read-only

AreaID

OCTET STRING (4)

Area where the summary route resides.

As per the MIB.

ospfAreaAggregateLsdbType (1.3.6.1.2.1.14.14.1.2)

read-only

INTEGER

summaryLink(3),                  nssaExternalLink (7)

Summary route type.

As per the MIB.

ospfAreaAggregateNet (1.3.6.1.2.1.14.14.1.3)

read-only

IpAddress

OCTET STRING (4)

Network address.

As per the MIB.

ospfAreaAggregateMask (1.3.6.1.2.1.14.14.1.4)

read-only

IpAddress

OCTET STRING (4)

Subnet mask.

As per the MIB.

ospfAreaAggregateStatus (1.3.6.1.2.1.14.14.1.5)

read-create

RowStatus

active(1),

notInService(2),

notReady(3),

createAndGo(4),

createAndWait(5),

destroy(6)

Row status.

Supports only the read operation.

ospfAreaAggregateEffect (1.3.6.1.2.1.14.14.1.6)

read-create

INTEGER

advertiseMatching (1),                  doNotAdvertiseMatching (2)

Whether subnets are included in the summary route.

Supports only the read and write operations.

ospfAreaAggregateExtRouteTag(1.3.6.1.2.1.14.14.1.7)

read-create

Unsigned32

INTEGER(0..4294967295)

External route tag in Type-7 LSAs.

Supports only the read and write operations. nssaExternalLink supports only the write operation.

Not supported

Not supported

Not supported

Supported

ospfLocalLsdbIpAddress (1.3.6.1.2.1.14.17.1.1)

not-accessible

IpAddress

OCTET STRING (4)

IP address of the interface that received the LSA.

As per the MIB.

ospfLocalLsdbAddressLessIf (1.3.6.1.2.1.14.17.1.2)

not-accessible

InterfaceIndexOrZero

Integer32(0..2147483647)

Index of the interface that received the LSA.

As per the MIB.

ospfLocalLsdbType (1.3.6.1.2.1.14.17.1.3)

not-accessible

INTEGER

localOpaqueLink (9)

LSA type.

As per the MIB.

ospfLocalLsdbLsid (1.3.6.1.2.1.14.17.1.4)

not-accessible

IpAddress

OCTET STRING (4)

LS ID.

As per the MIB.

ospfLocalLsdbRouterId (1.3.6.1.2.1.14.17.1.5)

not-accessible

RouterID

OCTET STRING (4)

A 32-bit number that uniquely identifies the originating router in the AS.

As per the MIB.

ospfLocalLsdbSequence (1.3.6.1.2.1.14.17.1.6)

read-only

Integer32

Standard MIB values.

LSA sequence number.

As per the MIB.

ospfLocalLsdbAge

(1.3.6.1.2.1.14.17.1.7)

read-only

Integer32

Standard MIB values.

LSA age in seconds.

As per the MIB.

ospfLocalLsdbChecksum

(1.3.6.1.2.1.14.17.1.8)

read-only

Integer32

Standard MIB values.

LSA checksum.

As per the MIB.

ospfLocalLsdbAdvertisement

(1.3.6.1.2.1.14.17.1.9)

read-only

OCTET STRING

OCTET STRING (1..65535)

Complete LSA information.

As per the MIB.

Not supported

Not supported

Not supported

Supported

ospfVirtLocalLsdbTransitArea (1.3.6.1.2.1.14.18.1.1)

not-accessible

AreaID

OCTET STRING (4)

Transit area that the virtual link traverses.

As per the MIB.

ospfVirtLocalLsdbNeighbor (1.3.6.1.2.1.14.18.1.2)

not-accessible

RouterID

OCTET STRING (4)

Router ID of the virtual neighbor.

As per the MIB.

ospfVirtLocalLsdbType (1.3.6.1.2.1.14.18.1.3)

not-accessible

INTEGER

localOpaqueLink (9)

LSA type.

As per the MIB.

ospfVirtLocalLsdbLsid (1.3.6.1.2.1.14.18.1.4)

not-accessible

IpAddress

OCTET STRING (4)

LS ID.

As per the MIB.

ospfVirtLocalLsdbRouterId (1.3.6.1.2.1.14.18.1.5)

not-accessible

RouterID

OCTET STRING (4)

A 32-bit number that uniquely identifies the originating router in the AS.

As per the MIB.

ospfVirtLocalLsdbSequence (1.3.6.1.2.1.14.18.1.6)

read-only

Integer32

Standard MIB values.

LSA sequence number.

As per the MIB.

ospfVirtLocalLsdbAge (1.3.6.1.2.1.14.18.1.7)

read-only

Integer32

Standard MIB values.

LSA age in seconds.

As per the MIB.

ospfVirtLocalLsdbChecksum (1.3.6.1.2.1.14.18.1.8)

read-only

Integer32

Standard MIB values.

LSA checksum.

As per the MIB.

ospfVirtLocalLsdbAdvertisement (1.3.6.1.2.1.14.18.1.9)

read-only

OCTET STRING

OCTET STRING (1..65535)

Complete LSA information.

As per the MIB.

Not supported

Not supported

Not supported

Supported

ospfAsLsdbType (1.3.6.1.2.1.14.19.1.1)

not-accessible

INTEGER

asExternalLink (5),                     asOpaqueLink   (11)

LSA type.

As per the MIB.

ospfAsLsdbLsid (1.3.6.1.2.1.14.19.1.2)

not-accessible

IpAddress

OCTET STRING (4)

LS ID.

As per the MIB.

ospfAsLsdbRouterId (1.3.6.1.2.1.14.19.1.3)

not-accessible

RouterID

OCTET STRING (4)

A 32-bit number that uniquely identifies the originating router in the AS.

As per the MIB.

ospfAsLsdbSequence (1.3.6.1.2.1.14.19.1.4)

read-only

Integer32

Standard MIB values.

LSA sequence number.

As per the MIB.

ospfAsLsdbAge (1.3.6.1.2.1.14.19.1.5)

read-only

Integer32

Standard MIB values.

LSA age in seconds.

As per the MIB.

ospfAsLsdbChecksum (1.3.6.1.2.1.14.19.1.6)

read-only

Integer32

Standard MIB values.

LSA checksum.

As per the MIB.

ospfAsLsdbAdvertisement (1.3.6.1.2.1.14.19.1.7)

read-only

OCTET STRING

OCTET STRING (1..65535)

Complete LSA information.

As per the MIB.

Not supported

Not supported

Not supported

Supported

ospfAreaLsaCountAreaId (1.3.6.1.2.1.14.20.1.1)

not-accessible

AreaID

OCTET STRING (4)

Area ID.

As per the MIB.

ospfAreaLsaCountLsaType (1.3.6.1.2.1.14.20.1.2)

not-accessible

INTEGER 

routerLink (1),                          networkLink (2),                          summaryLink (3),                          asSummaryLink (4),                         multicastLink (6),                       nssaExternalLink (7),                          areaOpaqueLink (10)

LSA type.

As per the MIB.

ospfAreaLsaCountNumber (1.3.6.1.2.1.14.20.1.3)

read-only

Gauge32

INTEGER(0..4294967295)

Number of LSAs of the specified type in the specified area.

As per the MIB.