01-OAP单板命令
本章节下载: 01-OAP单板命令 (123.34 KB)
· ICG 3000S/5000G/5000T信息通信网关使用集中式命令行,ICG 6000信息通信网关使用分布式命令行。
· 该特性仅在安装了HMIM-OAP接口模块时支持。ICG 3000S信息通信网关不支持安装HMIM-OAP接口模块。
oap connect命令用来从设备侧重定向到OAP单板。
集中式设备/分布式设备-独立运行模式/集中式IRF设备:
oap connect slot slot-number system system-name
分布式设备-IRF模式:
oap connect chassis chassis-number slot slot-number system system-name
slot slot-number:OAP单板所在的槽位号,集中式设备只能为0。(集中式设备/分布式设备-独立运行模式)
slot slot-number:OAP单板所在的IRF成员设备编号。(集中式IRF设备)
chassis chassis-number slot slot-number:表示指定成员设备上的指定单板。(分布式设备-IRF模式)
system system-name:OAP系统名称或OAP系统所在的设备子槽位号。
使用快捷键<Ctrl+K>可以从OAP单板的操作系统返回到设备命令行操作界面。
(1) 集中式设备/分布式设备-独立运行模式/集中式IRF设备
# 从设备侧重定向到6号槽位的OAP单板。
<Sysname> oap connect slot 0 system 6
Press CTRL+K to quit.
Connected to OAP.
(2) 分布式设备-IRF模式
# 从设备侧重定向到成员设备1的2号槽位5号子槽位的OAP单板。
<Sysname> oap connect chassis 1 slot 2 system 5
Press CTRL+K to quit.
Connected to OAP.
oap reboot命令用来重启OAP单板。
集中式设备/分布式设备-独立运行模式/集中式IRF设备:
oap reboot slot slot-number system system-name
分布式设备-IRF模式:
oap reboot chassis chassis-number slot slot-number system system-name
slot slot-number:OAP单板所在的槽位号,集中式设备只能为0。(集中式设备/分布式设备-独立运行模式)
slot slot-number:OAP单板所在的IRF成员设备编号。(集中式IRF设备)
chassis chassis-number slot slot-number:表示指定成员设备上的指定单板。(分布式设备-IRF模式)
system system-name:OAP系统名称或OAP系统所在的设备子槽位号。
(1) 集中式设备/分布式设备-独立运行模式/集中式IRF设备
# 重启6号槽位的OAP单板系统。
<Sysname> oap reboot slot 0 system 6
This command might cause data loss on the hard disk if the card is not been shut down.
Continue? [Y/N]:y
Rebooting the OAP card by command…
# 重启成员设备1的2号槽位5号子槽位的OAP单板系统。
<Sysname> oap reboot chassis 1 slot 2 system 5
This command might cause data loss on the hard disk if the card is not been shut down.
Continue? [Y/N]:y
Rebooting the OAP card by command…
不同款型规格的资料略有差异, 详细信息请向具体销售和400咨询。H3C保留在没有任何通知或提示的情况下对资料内容进行修改的权利!