3 Appendix A  AP views and technical specifications

Dimensions (H × W × D) (without the mounting bracket)

42 × 225 × 225 mm (1.65 × 8.86 × 8.86 in)

Weight

1.5 kg (3.31 lb)

Power consumption

≤ 54 W

Antenna

Built-in antenna

Standard compliance

·     IEEE802.11a/b/g/n/ac/ax/be

·     IEEE802.3at/bt

Powering option

IEEE802.3at/bt powering standard-compliant:

·     Power adapter

·     PoE

·     PoE optical transceiver module

Console port

Control port, used for debugging by the maintenance personnel

10GE2/P++SFP port

1000M/2.5G/5G/10G photoelectric hybrid port

10GE1/PoE++ port

100M/1000M/2.5G/5G/10G Ethernet copper port

When the AP operates in fit AP mode, the port is represented by interface number 10GE1/0/1 in the MAP file and Ten-GigabitEthernet 1 for configuration on the AC.

GE/PSE port

100M/1000M Ethernet copper port, used for connecting a downlink device. The AP can supply power through this port to a device with a maximum power consumption of 15 W.

When the AP operates in fit AP mode, the port is represented by interface number GE1/0/1 in the MAP file and gigabitethernet 1 for configuration on the AC.

USB port

USB-compliant USB port.

NOTE:

By default, the USB port is disabled. To enable the USB port, execute the usb enable command in AP view.

Power port (54VDC)

Used for receiving power from a local power source.

Reset button

For more information, see "Appendix B  LEDs and buttons."