H3C Access Controllers
Comware 7 Software Upgrade Guide

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Upgrading software

Software upgrade enables you to upgrade a software version, add new features, and fix software bugs.

Upgrade methods

You can upgrade system software by using one of the following methods:

 

Upgrade method	Remarks
Upgrading from the CLI	·     You must reboot the AC to complete the upgrade. ·     This method can interrupt ongoing network services.
Upgrading from the BootWare menu	Use this method when the AC cannot correctly start up.
Upgrading from the Web interface	This method does not require a console cable.

 

Preparing for the upgrade

	CAUTION: During the upgrade, the AC cannot provide any services. Make sure the upgrade has minimal impact on the network services.

 

This document uses a WX3520H as an example to describe how to upgrade software.

Before you upgrade system software from the CLI or BootWare menu, complete the following tasks:

·     Set up the upgrade environment as shown in Figure 1.

·     Configure routes to ensure that the AC and the file server can reach each other.

·     Run a TFTP or FTP server on the file server.

·     Log in to the CLI of the AC through Telnet or the console port.

·     Copy the upgrade file to the file server and correctly set the working directory on the TFTP or FTP server.

Before you upgrade system software from the Web interface, complete the following tasks:

·     Set up the upgrade environment as shown in Figure 2.

·     Copy the upgrade file to the PC.

Figure 1 Setting up the upgrade environment for upgrading from the CLI or BootWare menu

 

Figure 2 Setting up the upgrade environment for upgrading from the Web interface

 

Upgrading from the CLI

Saving the running configuration and verifying the storage space

1.     Execute the save command in any view to save the running configuration.

2.     Execute the dir command to display files on the storage medium. Identify the system software image and configuration file names and verify that the storage medium has sufficient space for the new system software image.

Downloading the image file to the AC

You can use the TFTP or FTP commands on the AC to access the TFTP or FTP server to back up or download files.

Using TFTP

Transfer the configuration file (for example, wx3520h.ipe) to the file server.

<Sysname> tftp 192.168.0.1 get wx3520h.ipe

Press CTRL+C to abort.

  % Total    % Received % Xferd  Average Speed   Time    Time     Time  Current

                                 Dload  Upload   Total   Spent    Left  Speed

100  160M  100  160M    0     0   816k      0  0:03:21  0:03:21 --:--:--  807k

 

<Sysname>

Using FTP

1.     From FTP client view, download the image file (for example, wx3520h.ipe) to the storage medium on the AC:

<ftp> get wx3520h.ipe

wx3520h.ipe already exists. Overwrite it? [Y/N]:y

227 Entering passive mode (192,168,0,1,5,20)

125 Using existing data connection

226 Closing data connection; File transfer successful.

37691392 bytes received in 17.7 seconds (2.03 Mbyte/s)

<ftp>

2.     Return to user view.

<ftp> quit

221 Service closing control connection

<Sysname>

Specifying the startup image file

1.     Specify the wx3520h.ipe file as the main image file for the AC at the next reboot.

<Sysname> boot-loader file cfa0:/wx3520h.ipe all main

Verifying the file cfa0:/wx3520h.ipe on slot 1............Done.

H3C WX3520H images in IPE:

  boot.bin

  system.bin

This command will set the main startup software images. Continue? [Y/N]:y

Add images to slot 1.

Decompressing file boot.bin to cfa0:/boot.bin........................................Done.

Decompressing file system.bin to cfa0:/system.bin.........................Done.

Decompression completed.

You are recommended to delete the .ipe file after you set startup software image

s for all slots.

Do you want to delete cfa0:/wx3520h.ipe now? [Y/N]:

The images that have passed all examinations will be used as the main startup so

ftware images at the next reboot on slot 1.

<Sysname>

2.     Verify that the file has been loaded.

<Sysname> display boot-loader

Software images on slot 1:

Current software images:

  cfa0:/boot.bin                                          

  cfa0:/system.bin

Main startup software images:

  cfa0:/boot.bin                                          

  cfa0:/system.bin

Backup startup software images:

  cfa0:/boot_backup.bin                                                        

  cfa0:/system_backup.bin

<Sysname>

Rebooting the AC to complete the upgrade

1.     Reboot the AC.

<Sysname> reboot

Start to check configuration with next startup configuration file, please wait.........DONE!

This command will reboot the device. Continue? [Y/N]:y

Now rebooting, please wait...

<Sysname>

System is starting...

2.     After the reboot is complete, verify that the system software image is correct.

<Sysname> display version

H3C Comware Software, Version 7.1.064, Release 5223

Copyright (c) 2004-2019 New H3C Technologies Co., Ltd. All rights reserved.

H3C WX3520H uptime is 0 weeks, 0 days, 0 hours, 37 minutes

Last reboot reason : Power on

 

Boot image: cfa0:/boot.bin

Boot image version: 7.1.064, Release 5223

  Compiled May 28 2018 16:00:00

System image: cfa0:system.bin

System image version: 7.1.064, Release 5223

  Compiled May 28 2018 16:00:00

 

 

Slot 1

Uptime is 0 week, 1 day, 16 hours, 48 minutes

with 1 RMI XLP 416 1000MHz Processor

4064M bytes DDR3

16M bytes NorFlash Memory

4002M bytes CFCard Memory

 

Hardware Version is Ver.A

CPLD 1 CPLD Version is 004

Basic Bootrom Version is 5.03

Extend Bootrom Version is 5.03

[Subslot 0]H3C WX3520H Hardware Version is Ver.A

 

<Sysname>

Upgrading from the BootWare menu

CAUTION: ·     The configuration will be cleared automatically during the software upgrade process. Back up the configuration file for the current software version before upgrade and reconfigure the device by using the backup configuration file after software upgrade. ·     When you use TFTP/FTP to upgrade software through an Ethernet port, the AC downloads the startup configuration file by using the interfaces in the order of management interface, WAN port, and LAN 1 port.

 

Saving the running configuration

1.     Save the running configuration to the storage medium.

<Sysname> save

The current configuration will be written to the device. Are you sure? [Y/N]:y

Please input the file name(*.cfg)[cfa0:/startup.cfg]

(To leave the existing filename unchanged, press the enter key):

cfa0:/startup.cfg exists, overwrite? [Y/N]:y

Validating file. Please wait...

Saved the current configuration to mainboard device successfully.

2.     Transfer the configuration file (for example, startup.cfg) to the file server. You can use TFTP or UDP to transfer the file. This example uses TFTP.

<Sysname> tftp 192.168.0.1 put startup.cfg

  File will be transferred in binary mode

  Sending file to remote TFTP server. Please wait... \

  TFTP: 1914 bytes sent in 0 second(s).

  File uploaded successfully.

3.     Reboot the AC.

System is starting...

Press Ctrl+D to access BASIC-BOOTWARE MENU

Press Ctrl+T to start heavy memory test

Booting Normal Extended BootWare

The Extended BootWare is self-decompressing....Done.

 

****************************************************************************   

*                                                                          *   

*                   H3C WX3520H BootWare, Version 1.10                     *   

*                                                                          *   

****************************************************************************   

Copyright (c) 2004-2018 New H3C Technologies Co., Ltd.                         

 

Compiled Date       : Apr 23 2018                                              

CPU Type            : XLP416                                                   

CPU Clock Speed     : 1000MHz                                                  

Memory Type         : DDR3 SDRAM                                                

Memory Size         : 4096MB                                                   

Memory Speed        : 1333MHz                                                  

BootWare Size       : 768KB                                                     

Flash Size          : 16MB                                                     

cfa0 Size           : 4002MB                                                   

CPLD1 Version       : 004                                                      

CPLD2 Version       : 000                                                      

PCB Version         : Ver.A                                                    

                                                                                

                                                                               

BootWare Validating...                                                         

Press Ctrl+B to access EXTENDED-BOOTWARE MENU...

4.     Press Ctrl+B at the prompt to access the EXTEND-BOOTWARE menu.

Password recovery capability is enabled.

Note: The current operating device is cfa0

Enter < Storage Device Operation > to select device.

 

===========================<EXTENDED-BOOTWARE MENU>===========================

|<1> Boot System                                                           |

|<2> Enter Serial SubMenu                                                  |

|<3> Enter Ethernet SubMenu                                                |

|<4> File Control                                                          |

|<5> Restore to Factory Default Configuration                              |

|<6> Skip Current System Configuration                                     |

|<7> BootWare Operation Menu                                               |

|<8> Skip Authentication for Console Login                                 |

|<9> Storage Device Operation                                              |

|<0> Reboot                                                                |

============================================================================

Ctrl+Z: Access EXTENDED ASSISTANT MENU

Ctrl+F: Format File System

Ctrl+C: Display Copyright

Enter your choice(0-9):

Table 1 EXTEND-BOOTWARE menu options

Item	Description
<1> Boot System	Boot the system software image.
<2> Enter Serial SubMenu	Access the serial submenu.
<3> Enter Ethernet SubMenu	Access the Ethernet submenu.
<4> File Control	Access the File Control submenu.
<5> Restore to Factory Default Configuration	Delete the next-startup configuration files and load the factory-default configuration.
<6> Skip Current System Configuration	Start the AC with the factory default configuration. This is a one-time operation and does not take effect at the next reboot. You use this option when you forget the console login password.
<7> BootWare Operation Menu	Access the BootWare Operation menu for backing up, restoring, or upgrading BootWare. When you upgrade the system software image, BootWare is automatically upgraded. H3C does not recommend upgrading BootWare separately. This document does not cover using the BootWare Operation menu.
<8> Skip Authentication for Console Login	Clear all the authentication schemes on the console port.
<9> Storage Device Operation	Select a storage device.
<0> Reboot	Restart the AC.

 

Using TFTP/FTP to upgrade software through an Ethernet port

1.     In the EXTEND-BOOTWARE menu, enter 3 to access the Ethernet submenu.

==========================<Enter Ethernet SubMenu>==========================

|Note:the operating device is cfa0                                         |

|<1> Download Image Program To SDRAM And Run                               |

|<2> Update Main Image File                                                |

|<3> Update Backup Image File                                              |

|<4> Download Files(*.*)                                                   |

|<5> Modify Ethernet Parameter                                             |

|<0> Exit To Main Menu                                                     |

|<Ensure The Parameter Be Modified Before Downloading!>                    |

============================================================================

Enter your choice(0-5):

Table 2 Ethernet submenu options

Item	Description
<1> Download Image Program To SDRAM And Run	Download a system software image to the SDRAM and run the image.
<2> Update Main Image File	Upgrade the main system software image.
<3> Update Backup Image File	Upgrade the backup system software image.
<4> Download Files(*.*)	Download a system software image to the storage medium.
<5> Modify Ethernet Parameter	Modify network settings.
<0> Exit To Main Menu	Return to the EXTEND-BOOTWARE menu.

 

2.     Enter 5 to configure the network settings.

=========================<ETHERNET PARAMETER SET>=========================

|Note:       '.' = Clear field.                                           |

|            '-' = Go to previous field.                                  |

|          Ctrl+D = Quit.                                                 |

==========================================================================

Protocol (FTP or TFTP) :ftp

Load File Name         :wx3520h.ipe

                       :

Target File Name       :wx3520h.ipe

                       :

Server IP Address      :192.168.0.1

Local IP Address       :192.168.0.100

Subnet Mask            :255.255.255.0

Gateway IP Address     :0.0.0.0

FTP User Name          :user001

FTP User Password      :********

Table 3 Network parameter fields and shortcut keys

Field	Description
'.' = Clear field	Press a dot (.) and then Enter to clear the setting for a field.
'-' = Go to previous field	Press a hyphen (-) and then Enter to return to the previous field.
Ctrl+D = Quit	Press Ctrl + D to exit the Ethernet Parameter Set menu.
Protocol (FTP or TFTP)	Set the file transfer protocol to FTP or TFTP.
Load File Name	Set the name of the file to be downloaded.
Target File Name	Set a file name for saving the file on the AC. By default, the target file name is the same as the source file name.
Server IP Address	Set the IP address of the FTP or TFTP server. If a mask must be set, use a colon (:) to separate the mask length from the IP address, for example, 192.168.80.10:24.
Local IP Address	Set the IP address of the AC.
Subnet Mask	Subnet Mask of the local IP address.
Gateway IP Address	Set a gateway IP address if the AC is on a different network than the server.
FTP User Name	Set the username for accessing the FTP server. This username must be the same as configured on the FTP server. This field is not available for TFTP.
FTP User Password	Set the password for accessing the FTP server. This password must be the same as configured on the FTP server. This field is not available for TFTP.

 

3.     Enter 2 or 3 in the Ethernet submenu to upgrade a system software image. For example, enter 2 to upgrade the main system software image.

Loading.....................................................................

.........................................Done.

168620032 bytes downloaded!

The file is exist,will you overwrite it? [Y/N]Y

Image file boot.bin is self-decompressing...

Saving file cfa0:/boot.bin ...........................Done.

Image file system.bin is self-decompressing...

Saving file cfa0:/system.bin .........................Done.

4.     Enter 0 to return to the EXTEND-BOOTWARE menu.

Enter your choice(0-5): 0

 

===========================<EXTENDED-BOOTWARE MENU>==========================

|<1> Boot System                                                            |

|<2> Enter Serial SubMenu                                                   |

|<3> Enter Ethernet SubMenu                                                 |

|<4> File Control                                                           |

|<5> Modify BootWare Password                                               |

|<6> Skip Current System Configuration                                      |

|<7> BootWare Operation Menu                                                |

|<8> Skip Authentication for Console Login                                  |

|<9> Storage Device Operation                                               |

|<0> Reboot                                                                 |

============================================================================

Ctrl+Z: Access EXTENDED ASSISTANT MENU

Ctrl+F: Format File System

Ctrl+C: Display Copyright

Enter your choice(0-9):

5.     Enter 1 to boot the system.

Enter your choice(0-9): 1

Loading the main image files...

Loading file cfa0:/system.bin...........................Done.

Loading file cfa0:/boot.bin..............Done.

 

Image file cfa0:/boot.bin is self-decompressing..............Done.

System image is starting...

Press Ctrl+I to enter inter-initiate mode...  0 s

Cryptographic Algorithms Known-Answer Tests are running ...

CPU 0 of slot 1:

Starting Known-Answer tests in the user space.

Known-answer test for SHA1 passed.

Known-answer test for SHA224 passed.

Known-answer test for SHA256 passed.

Known-answer test for SHA384 passed.

Known-answer test for SHA512 passed.

Known-answer test for HMAC-SHA1 passed.

Known-answer test for HMAC-SHA224 passed.

Known-answer test for HMAC-SHA256 passed.

Known-answer test for HMAC-SHA384 passed.

Known-answer test for HMAC-SHA512 passed.

Known-answer test for AES passed.

Known-answer test for RSA(signature/verification) passed.

Known-answer test for RSA(encrypt/decrypt) passed.

Known-answer test for DSA(signature/verification) passed.

Known-answer test for random number generator passed.

Known-Answer tests in the user space passed.

Starting Known-Answer tests in the kernel.

Known-answer test for AES passed.

Known-answer test for HMAC-SHA1 passed.

Known-answer test for SHA1 passed.

Known-answer test for GCM passed.

Known-answer test for GMAC passed.

Known-answer test for random number generator passed.

Known-Answer tests in the kernel passed.

Cryptographic Algorithms Known-Answer Tests passed.

Line con0 is available.

 

 

Press ENTER to get started.

Upgrading from the Web interface

SPMs do not support upgrade from the Web interface.

Restrictions and guidelines

When you upgrade the system software from the Web interface, follow these restrictions and guidelines:

·     As a best practice, use one of the following browsers to access the Web interface:

¡     Internet Explorer 10 or higher

¡     Chrome 35.0.1916.114 or higher.

¡     Firefox 30.0.0.5269 or higher.

¡     Safari 5.1 or higher.

·     Make sure the browser allows third-party cookies and is enabled with Active Scripting (or JavaScript).

·     If an Internet Explorer is used, make sure the following functions are enabled:

¡     Script ActiveX controls marked safe for scripting.

¡     Run ActiveX controls and plugins.

·     After software upgrade, first clear cache in the browser and then log in to the Web interface as a best practice.

Procedure

1.     Set the IP address of the PC to an address in the 192.168.0.0/24 segment (except for 192.168.0.100). This section uses 192.168.0.1 as an example.

2.     Open a browser, enter the IP address of the AC in the address bar, and then press Enter.

3.     On the login page, enter the username and password, and then click Login. By default, both the username and password are admin.

Figure 3 Logging in to the Web interface

 

4.     Click the system view tab at the bottom of the page.

5.     From the left navigation pane, select File Systems > File System Management to verify that the storage medium has sufficient space for the new system software image.

6.     From the left navigation pane, select System > Management > Configuration. On the page that opens, click Export Running Configuration.

Figure 4 Exporting running configuration

 

7.     From the navigation panel, select System > Management > Upgrade. On the page that opens, click Upgrade.

Figure 5 Upgrading the system software

 

8.     In the dialog box that opens, upload the new software image. You can select Reboot now to enable the system to restart the AC immediately after the upgrade completes. Click OK.

Figure 6 Uploading the new software image

 

9.     After AC restart, re-log in to the Web interface. From the navigation pane, select System > Management > About. Then click Version to verify that the software image is correct.