Report settings

This help contains the following topics:

·     Introduction

·     Configure report subscription

Introduction

After you add a subscriber for a report, the report will be sent to the subscriber through email.

For the subscribers to receive the report, you must configure the email server.

The device sends the daily report during the least busy hours (1 a.m. to 5 a.m.). The monthly report of the previous month is sent on the first day of each month.

The report subscription feature supports the following types of reports:

·     Summary report—Displays summarized service statistics collected over a time range.

·     Comparison report—Provides comparison of service statistics collected over two time ranges that contain the same number of days.

·     Intelligent report—Provides intelligent analysis of users' work efficiency, data leakage, and turnover risks based on their network access behaviors.

·     Comprehensive report—Illustrates the overall device operational and network security status based on analysis of critical service statistics.

Configure report subscription

Configure report subscription as shown in Figure 1.

Figure 1 Report subscription configuration procedure

Procedure

1.     Click the System tab.

2.     In the navigation pane, select Report Settings > Email Server.

3.     Configure the email server.

Table 1 Email server configuration items

4.     Click Apply.

5.     Add a subscriber for a report:

a.     Go to the Report Settings > Report Subscription page.

b.     Click Add for a report.

c.     Enter the email address of the report subscriber.

d.     Click OK.