- Table of Contents
-
- 06-System
- 01-High availability group
- 02-VRRP
- 03-Track
- 04-BFD
- 05-NQA
- 06-Basic log settings
- 07-Session log settings
- 08-NAT log settings
- 09-AFT log settings
- 10-Threat log settings
- 11-Application audit log settings
- 12-URL filtering log settings
- 13-Bandwidth alarm logs
- 14-Attack defense log settings
- 15-NetShare log settings
- 16-Report settings
- 17-Session settings
- 18-Signature upgrade
- 19-Software upgrade
- 20-License management
- 21-Administrators
- 22-Date and time
- 23-Configuration management
- 24-Packet capture
- 25-Webpage Diagnosis
- 26-Packet trace
- 27-Fast Internet Access
- 28-SNMP
- 29-IRF
- 30-IRF advanced settings
- 30-IRF advanced settings(only for F50X0-D and F5000-AK5X5 firewalls)
- 31-Contexts
- 31-Contexts(only for F50X0-D and F5000-AK5X5 firewalls)
- 32-About
- 33-MAC address learning through a Layer 3 device
- 34-Bandwidth management logs
- 35-Configuration log settings
- 36-Context rate limit logging
- 37-Heartbeat log settings
- 38-Diagnostic Info
- 39-IP access logs
- 40-IP reputation log settings
- 41-IPsec diagnosis
- 42-Load balancing logging
- 43-Load balancing test
- 44-MAC authentication online users
- 45-Packet capture
- 45-Packet capture(only for F50X0-D and F5000-AK5X5 firewalls)
- 46-Ping
- 47-Reboot
- 48-Security policy log
- 49-Tracert
- 50-WAF log settings
- Related Documents
-
Title | Size | Download |
---|---|---|
10-Threat log settings | 25.71 KB |
Threat log settings
This help contains the following topics:
Introduction
Threat logs record detected network attack behaviors. Threat logs can be classified into IPS logs and anti-virus logs.
IPS log settings
IPS logs can be output as system logs to the information center, as fast logs to designated log hosts, or be output to designated email recipients through email.
IPS logs can be output as fast logs in either of the following formats:
· Standard.
· SGCC.
Only IPS alarm logs and signature update logs can be output in SGCC format. You can set the daily log output time for signature update logs in SGCC format.
Support for the SGCC format depends on the device model.
Anti-virus log settings
Anti-virus logs can be output as system logs to the information center or be output through email.
Restrictions and guidelines
IPS logs can be output in Chinese. If you select Chinese for outputting IPS logs, the attack name, attack category, and attack subcategory fields of an IPS log message are displayed in Chinese.