• 产品与解决方案
  • 行业解决方案
  • 服务
  • 支持
  • 合作伙伴
  • 新华三人才研学中心
  • 关于我们

H3C S6800 & S6860 & S6861系列以太网交换机 典型配置举例-Release 27xx系列-6W100

目录

44-以太网OAM典型配置举例

本章节下载 44-以太网OAM典型配置举例  (188.78 KB)

docurl=/cn/Service/Document_Software/Document_Center/Home/Switches/00-Public/Configure/Typical_Configuration_Example/H3C_S6800_S6860_S6861_CERelease_27xx-6W100/202001/1259331_30005_0.htm

44-以太网OAM典型配置举例

H3C S6800&S6860&S6861产品以太网OAM典型配置举例

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Copyright © 2019 新华三技术有限公司 版权所有,保留一切权利。

非经本公司书面许可,任何单位和个人不得擅自摘抄、复制本文档内容的部分或全部,并不得以任何形式传播。

除新华三技术有限公司的商标外,本手册中出现的其它公司的商标、产品标识及商品名称,由各自权利人拥有。

本文档中的信息可能变动,恕不另行通知。



1  简介

本文档介绍了使用以太网OAM监控链路性能的典型配置举例。

以太网OAM是一种监控网络故障的工具,可以监控两台直连设备之间的链路状态。

2  配置前提

本文档中的配置均是在实验室环境下进行的配置和验证,配置前设备的所有参数均采用出厂时的缺省配置。如果您已经对设备进行了配置,为了保证配置效果,请确认现有配置和以下举例中的配置不冲突。

本文档假设您已了解以太网OAM特性。

3  配置举例

3.1  组网需求

图1所示,企业网络和运营商网络通过各自边缘设备Device A和Device B进行相连。使用以太网OAM功能,监控Device A和Device B间链路的状态,从而可确定运营商所提供的网络链路可靠性是否符合与企业用户签订的SLA(Service Level Agreement),具体需求:

·            实现自动检测Device A和Device B之间链路的连通性;

·            网络管理员可以查看是否Device A和Device B之间链路是否发生紧急链路事件;

·            网络管理员可以通过观察一般链路事件统计信息动态地了解链路状态。

图1 以太网OAM组网示意图

 

3.2  配置思路

为了在Device A和Device B之间链路上成功建立以太网OAM连接,至少需要保证链路两端至少有一个接口的以太网OAM的连接模式为Active模式。由于本设备的所有接口的以太网OAM的连接模式缺省情况为Active模式,所以可以省去此配置。本案例以在Device A的XGE1/0/1上配置以太网OAM的连接模式为Active模式,在Device B的XGE1/0/1上配置以太网OAM的连接模式为Passive模式为例。

以太网OAM功能可以监控的一般链路事件包括错误信号事件、错误帧事件、错误帧周期事件及错误帧秒事件。缺省情况下,开启了以太网OAM功能的接口的一般链路事件检测参数均采用全局配置,您可以根据实际网络情况对其中某些事件的检测参数进行修改,以满足您对这些事件的检测精度。本案例以对错误帧事件的检测参数进行修改为例。

3.3  适用产品及版本

表1 适用产品及版本

产品

软件版本

S6800系列

S6860系列

S6861系列

Release 2702

 

3.4  配置注意事项

不允许在已使能以太网OAM功能的接口上更改以太网OAM的连接模式。如需更改,请先关闭该接口上的以太网OAM功能。

3.5  配置步骤

3.5.1  Device A的配置

# 配置接口Ten-GigabitEthernet1/0/1的以太网OAM的连接模式为Active模式(缺省情况下,所有接口的以太网OAM的连接模式都为Active模式),并开启以太网OAM功能。

<DeviceA> system-view

[DeviceA] interface ten-gigabitethernet 1/0/1

[DeviceA-Ten-GigabitEthernet1/0/1] oam mode active

[DeviceA-Ten-GigabitEthernet1/0/1] oam enable

# 在接口Ten-GigabitEthernet1/0/1上配置错误帧事件的检测窗口为20000毫秒,检测阈值为10次。

[DeviceA-Ten-GigabitEthernet1/0/1] oam errored-frame window 200

[DeviceA-Ten-GigabitEthernet1/0/1] oam errored-frame threshold 10

[DeviceA-Ten-GigabitEthernet1/0/1] quit

3.5.2  Device B的配置

# 配置接口Ten-GigabitEthernet1/0/1的以太网OAM的连接模式为Passive模式,并开启以太网OAM功能。

<DeviceB> system-view

[DeviceB] interface ten-gigabitethernet 1/0/1

[DeviceB-Ten-GigabitEthernet1/0/1] oam mode passive

[DeviceB-Ten-GigabitEthernet1/0/1] oam enable

[DeviceB-Ten-GigabitEthernet1/0/1] quit

3.6  验证配置

# 显示Device A上的全局以及未采用缺省配置的接口上的以太网OAM配置信息。

[DeviceA] display oam configuration

---------------- [Global] ----------------

 OAM timers

   Hello timer        : 1000 milliseconds

   Keepalive timer    : 5000 milliseconds

 Link monitoring

   Errored symbol period

     Window           : 100 x 1000000 symbols

     Threshold        : 1 error symbols

   Errored frame

     Window           : 10 x 100 milliseconds

     Threshold        : 1 error frames

   Errored frame period

     Window           : 1000 x 10000 frames

     Threshold        : 1 error frames

   Errored frame seconds

     Window           : 600 x 100 milliseconds

     Threshold        : 1 error seconds

 

----------- [Ten-GigabitEthernet1/0/1] -----------

 OAM timers

   Hello timer        : 1000 milliseconds

   Keepalive timer    : 5000 milliseconds

 Link monitoring

   Errored symbol period

     Window           : 100 x 1000000 symbols

     Threshold        : 1 error symbols

   Errored frame

     Window           : 200 x 100 milliseconds

     Threshold        : 10 error frames

   Errored frame period

     Window           : 1000 x 10000 frames

     Threshold        : 1 error frames

   Errored frame seconds

     Window           : 600 x 100 milliseconds

     Threshold        : 1 error seconds

# 显示Device A上以太网OAM的紧急链路事件统计信息。

[DeviceA] display oam critical-event

----------- [Ten-GigabitEthernet1/0/1] -----------

 Local link status   : UP

 Event statistics

   Link fault        : Not occurred

   Dying gasp        : Not occurred

   Critical event    : Not occurred

以上信息表明:Device ADevice B之间的链路连通正常,尚未发生任何紧急链路事件。

# 通过Device A显示本端的一般链路事件统计信息。

[DeviceA] display oam link-event local

----------- [Ten-GigabitEthernet1/0/1] -----------

 Link status: UP

 OAM local errored frame event

   Event time stamp        : 5789 x 100 milliseconds

   Errored frame window    : 200 x 100 milliseconds

   Errored frame threshold : 10 error frames

   Errored frame           : 13 error frames

   Error running total     : 350 error frames

   Event running total     : 17 events

上面的显示信息表明从OAM连接建立后,Device A上总共发生了350次错误帧,其中错误帧事件有17次,链路的性能不稳定。

说明

当链路检测结果为链路性能不稳定,请咨询H3C技术支援人员。

 

3.7  配置文件

·            Device A

#

interface Ten-GigabitEthernet1/0/1

 port link-mode bridge

 oam errored-frame window 200

 oam errored-frame threshold 10

 oam enable

·            Device B

#

interface Ten-GigabitEthernet1/0/1

 port link-mode bridge

 oam mode passive

 oam enable

4  相关资料

·            H3C S6800[60][61](R27xx) & S6820(R630x)系列以太网交换机 可靠性配置指导

·            H3C S6800[60][61](R27xx) & S6820(R630x)系列以太网交换机 可靠性命令参考

 

不同款型规格的资料略有差异, 详细信息请向具体销售和400咨询。H3C保留在没有任何通知或提示的情况下对资料内容进行修改的权利!

新华三官网
联系我们