07-软件升级命令
本章节下载: 07-软件升级命令 (107.76 KB)
boot-loader file命令用来指定设备下次启动时使用的软件包/IPE文件(以下简称下次启动软件包/IPE文件)。
boot-loader file ipe-filename { backup | main }
IRF模式:
boot-loader file boot boot-package system system-package [ feature feature-package&<1-30> ] { all | slot slot-number } { backup | main }
boot-loader file ipe-filename { all | slot slot-number } { backup | main }
boot boot-package:Boot包的名称,以.bin作为后缀名,从存储介质名开始为1~63个字符的字符串(包括存储介质名在内),不区分大小写。
system system-package:System包的名称,以.bin作为后缀名,从存储介质名开始为1~63个字符的字符串(包括存储介质名在内),不区分大小写。
feature feature-package:Feature包的名称,以.bin作为后缀名,从存储介质名开始为1~63个字符的字符串(包括存储介质名在内),不区分大小写。feature-package&<1-30>表示前面的参数最多可以输入30次。
ipe-filename:表示IPE(Image Package Envelope,复合软件包套件)文件的名称,以.ipe作为后缀名,从存储介质名开始为1~63个字符的字符串(包括存储介质名在内),不区分大小写。
all:用来升级整个系统。当用户获取的IPE包中包含IRF系统升级需要的所有软件包时,使用这样的IPE包,并指定all参数,执行一次boot-loader file命令,就能指定系统中所有硬件下次启动时使用的软件包/IPE文件。
slot slot-number:表示待升级的成员设备的编号。
backup:指定该软件包为备用启动软件包,并将该软件包的名称添加到备用启动软件包列表。备用启动软件包用于主用启动软件包不可用或异常情况时,引导设备启动。
main:指定该软件包为主用启动软件包,并将该软件包的名称添加到主用启动软件包列表。主用启动软件包用于引导设备启动。
(1) 独立运行模式
请先查看软件包版本发布说明书,如果软件包需要License才能运行,且设备当前没有对应的有效的License时,需安装对应的License,再执行该命令。否则:
· 对于boot-loader file boot boot-package system system-package [ feature feature-package&<1-30> ] { backup | main }命令,只要指定某个的软件包当前没有有效的License,就会导致整条命令配置失败。
· 对于boot-loader file ipe-filename { backup | main }命令,只有当前没有有效的License的软件包配置失败,其它软件包会配置成功。
当配置该命令时,命令中指定的软件包/IPE文件必须放在设备Flash的根目录下,文件名中必须包含存储介质的名称,形如flash:/xx.bin(flash:/xx.ipe)。
成功执行该命令后,系统会用命令中指定的软件包替换现有的软件包列表。如果命令行中没有指定Feature包,则更新后的软件包列表中不会有Feature包。
(2) IRF模式
· 请先查看软件包版本发布说明书,如果软件包需要License才能运行,且设备当前没有对应的有效的License时,需安装对应的License,再执行该命令。否则,当使用软件包配置该命令时,只要指定的某个软件包当前没有有效的License,则会导致整条命令配置失败;当使用IPE文件配置该命令时,只有当前没有有效的License的软件包配置失败,其它软件包会配置成功。
· 当配置该命令时,命令中指定的软件包/IPE文件必须放在存储介质Flash的根目录下,文件名中必须包含存储介质的名称。
· 系统会自动检查指定单板上对应路径下是否存在同名文件,如果不存在,则直接从指定路径拷贝一份并设置为下次启动软件包;如果存在,则提示用户是否从指定路径拷贝一份并设置为下次启动软件包。
· 成功执行该命令后,系统会用命令中指定的软件包替换现有的软件包列表。如果命令行中没有指定Feature包,则更新后的软件包列表中不会有Feature包。
# 指定设备下次启动时所用的主用启动文件为flash:/all.ipe。(独立运行模式)
<Sysname> boot-loader file flash:/all.ipe main
Verifying the IPE file and the images............Done.
Images in IPE:
boot.bin
system.bin
This command will set the main startup software images. Continue? [Y/N]:Y
Add images to the device.
File flash:/boot.bin already exists on the device.
File flash:/system.bin already exists on the device.
Overwrite the existing files? [Y/N]:Y
Decompressing file boot.bin to flash:/boot.bin........................Done.
Decompressing file system.bin to flash:/system.bin...............................Done.
The images that have passed all examinations will be used as the main startup software images at the next reboot on the device..
# 指定设备下次启动时所用的主用启动文件为flash:/boot.bin和flash:/system.bin。(独立运行模式)
<Sysname> boot-loader file boot flash:/boot.bin system flash:/system.bin main
This command will set the main startup software images. Continue? [Y/N]:y
The images that have passed all examinations will be used as the main startup
software images at the next reboot on the device.
# 指定成员设备1下次启动时所用的主用启动文件为flash:/all.ipe。(IRF模式)
<Sysname> boot-loader file flash:/all.ipe slot 1 main
Verifying the IPE file and the images............Done.
Images in IPE:
boot.bin
system.bin
This command will set the main startup software images. Continue? [Y/N]:Y
Add images to target slot.
File flash:/boot.bin already exists on slot 1.
File flash:/system.bin already exists on slot 1.
Overwrite the existing files? [Y/N]:Y
Decompressing file boot.bin to flash:/boot.bin........................Done.
Decompressing file system.bin to flash:/system.bin...............................Done.
The images that have passed all examinations will be used as the main startup software images at the next reboot on slot 1.
display boot-loader命令用来显示本次启动和下次启动所采用的启动软件包的名称。
IRF模式:
display boot-loader [ slot slot-number ]
slot slot-number:表示成员设备的编号。不指定该参数时,表示IRF中的所有成员设备。
# 显示本次启动和下次启动所采用的启动软件包的名称(独立运行模式)
Software images on the device:
Current software images:
flash:/VSR1000-CMW710-BOOT-E0314P01-X64.bin
flash:/VSR1000-CMW710-SYSTEM-E0314P01-X64.bin
Main startup software images:
flash:/VSR1000-CMW710-BOOT-E0314P01-X64.bin
flash:/VSR1000-CMW710-SYSTEM-E0314P01-X64.bin
Backup startup software images:
None
# 显示本次启动和下次启动所采用的启动软件包的名称(IRF模式)
Software images on slot 1:
Current software images:
flash:/VSR1000-CMW710-BOOT-E0314P01-X64.bin
flash:/VSR1000-CMW710-SYSTEM-E0314P01-X64.bin
Main startup software images:
flash:/VSR1000-CMW710-BOOT-E0314P01-X64.bin
flash:/VSR1000-CMW710-SYSTEM-E0314P01-X64.bin
Backup startup software images:
None
表1-1 display boot-loader命令显示信息描述表
成员编号为n的某成员设备的启动软件包的相关信息(IRF模式) |
|
不同款型规格的资料略有差异, 详细信息请向具体销售和400咨询。H3C保留在没有任何通知或提示的情况下对资料内容进行修改的权利!