This object is related to the dot1dStpHelloTime, dot1dStpMaxAge, and dot1dStpForwardDelay objects defined in IEEE 802.1d. Modification to the hh3cdot1sStpDiameter object will change the values of those objects.

Modification to any of the dot1dStpHelloTime, dot1dStpMaxAge, and dot1dStpForwardDelay objects will invalidate the value of the hh3cdot1sStpDiameter object.

hh3cdot1sMstBridgeMaxHops (1.3.6.1.4.1.25506.8.35.14.4)

Object (OID)	Access	Syntax	Value range	Description	Implementation
hh3cdot1sMstBridgeMaxHops (1.3.6.1.4.1.25506.8.35.14.4)	read-write	INTEGER	1..40	Maximum hops of an MST region.	As per the MIB.

hh3cdot1sMstMasterBridgeID (1.3.6.1.4.1.25506.8.35.14.5)

Object (OID)	Access	Syntax	Value range	Description	Implementation
hh3cdot1sMstMasterBridgeID (1.3.6.1.4.1.25506.8.35.14.5)	read-only	BridgeId	OCTET STRING (8)	Root bridge in an MSTP region.	As per the MIB.

hh3cdot1sMstMasterPathCost (1.3.6.1.4.1.25506.8.35.14.6)

Object (OID)	Access	Syntax	Value range	Description	Implementation
hh3cdot1sMstMasterPathCost (1.3.6.1.4.1.25506.8.35.14.6)	read-only	INTEGER	Standard MIB values.	Cost of the path to the root bridge.	As per the MIB.

hh3cdot1sMstBpduGuard (1.3.6.1.4.1.25506.8.35.14.7)

Object (OID)

Access

Syntax

Value range

Description

Implementation

hh3cdot1sMstBpduGuard (1.3.6.1.4.1.25506.8.35.14.7)

read-write

EnabledStatus

enabled(1)

disabled(2)

BPDU guard.

As per the MIB.

hh3cdot1sMstAdminFormatSelector (1.3.6.1.4.1.25506.8.35.14.8)

Object (OID)	Access	Syntax	Value range	Description	Implementation
hh3cdot1sMstAdminFormatSelector (1.3.6.1.4.1.25506.8.35.14.8)	read-write	INTEGER	0.	Bridge selection factor.	This object is configurable, and you can set it only to 0.

hh3cdot1sMstAdminRegionName (1.3.6.1.4.1.25506.8.35.14.9)

Object (OID)	Access	Syntax	Value range	Description	Implementation
hh3cdot1sMstAdminRegionName (1.3.6.1.4.1.25506.8.35.14.9)	read-write	OCTET STRING	SIZE (1..32)	MST region name.	As per the MIB.

hh3cdot1sMstAdminRevisionLevel (1.3.6.1.4.1.25506.8.35.14.10)

Object (OID)	Access	Syntax	Value range	Description	Implementation
hh3cdot1sMstAdminRevisionLevel (1.3.6.1.4.1.25506.8.35.14.10)	read-write	INTEGER	0..65535	MSTP revision level.	As per the MIB.

hh3cdot1sMstOperFormatSelector (1.3.6.1.4.1.25506.8.35.14.11)

Object (OID)	Access	Syntax	Value range	Description	Implementation
hh3cdot1sMstOperFormatSelector (1.3.6.1.4.1.25506.8.35.14.11)	read-only	INTEGER	Standard MIB values.	Effective selection factor of an MSTP region.	As per the MIB.

hh3cdot1sMstOperRegionName (1.3.6.1.4.1.25506.8.35.14.12)

Object (OID)	Access	Syntax	Value range	Description	Implementation
hh3cdot1sMstOperRegionName (1.3.6.1.4.1.25506.8.35.14.12)	read-only	OCTET STRING	SIZE (0..32)	Effective MST region name.	As per the MIB.

hh3cdot1sMstOperRevisionLevel (1.3.6.1.4.1.25506.8.35.14.13)

Object (OID)	Access	Syntax	Value range	Description	Implementation
hh3cdot1sMstOperRevisionLevel (1.3.6.1.4.1.25506.8.35.14.13)	read-only	INTEGER	0..65535	Effective MSTP revision level.	As per the MIB.

hh3cdot1sMstOperConfigDigest (1.3.6.1.4.1.25506.8.35.14.14)

Object (OID)	Access	Syntax	Value range	Description	Implementation
hh3cdot1sMstOperConfigDigest (1.3.6.1.4.1.25506.8.35.14.14)	read-only	OCTET STRING	SIZE (0..16)	Effective configuration digest of an MST region.	As per the MIB.

hh3cdot1sMstRegionConfActive (1.3.6.1.4.1.25506.8.35.14.15)

Object (OID)

Access

Syntax

Value range

Description

Implementation

hh3cdot1sMstRegionConfActive (1.3.6.1.4.1.25506.8.35.14.15)

read-write

INTEGER

enable(1)

disable(2)

Activate MST region configuration.

Default: Enabled.

If you set the value to disable, MST region configuration is read-only and does not take effect.

hh3cdot1sMstDefaultVlanAllo (1.3.6.1.4.1.25506.8.35.14.16)

Object (OID)

Access

Syntax

Value range

Description

Implementation

hh3cdot1sMstDefaultVlanAllo (1.3.6.1.4.1.25506.8.35.14.16)

read-write

INTEGER

enable(1)

unused(65535)

Default VLAN-to-instance mappings in an MST region.

As per the MIB.

hh3cdot1sMstDefaultRegionName (1.3.6.1.4.1.25506.8.35.14.17)

Object (OID)

Access

Syntax

Value range

Description

Implementation

hh3cdot1sMstDefaultRegionName (1.3.6.1.4.1.25506.8.35.14.17)

read-write

INTEGER

enable(1)

unused(65535)

Default MST region name.

As per the MIB.

hh3cdot1sStpPathCostStandard (1.3.6.1.4.1.25506.8.35.14.21)

Object (OID)

Access

Syntax

Value range

Description

Implementation

hh3cdot1sStpPathCostStandard (1.3.6.1.4.1.25506.8.35.14.21)

read-write

INTEGER

legacy(0)

dot1d-1998(1)

dot1t(2)

Standard for calculating the default path costs.

legacy—Private standard.

dot1d-1998—IEEE 802.1d-1998.

dot1t—IEEE 802.1t.

hh3cMstiTcGuardVal (1.3.6.1.4.1.25506.8.35.14.22.1)

Object (OID)	Access	Syntax	Value range	Description	Implementation
hh3cMstiTcGuardVal (1.3.6.1.4.1.25506.8.35.14.22.1)	accessible-for-notify	Integer32	Integer32 (1..255)	TC threshold.	As per the MIB.

hh3cPvstPvid (1.3.6.1.4.1.25506.8.35.14.22.2)

Object (OID)	Access	Syntax	Value range	Description	Implementation
hh3cPvstPvid (1.3.6.1.4.1.25506.8.35.14.22.2)	accessible-for-notify	Integer32	Integer32 (1..4094)	PVID.	As per the MIB.

hh3cPvstPvidInPdu (1.3.6.1.4.1.25506.8.35.14.22.3)

Object (OID)	Access	Syntax	Value range	Description	Implementation
hh3cPvstPvidInPdu (1.3.6.1.4.1.25506.8.35.14.22.3)	accessible-for-notify	Integer32	Integer32 (1..4094)	PVID carried in packets.	As per the MIB.

hh3cMstiLpuStgNum (1.3.6.1.4.1.25506.8.35.14.22.4)

Object (OID)	Access	Syntax	Value range	Description	Implementation
hh3cMstiLpuStgNum (1.3.6.1.4.1.25506.8.35.14.22.4)	accessible-for-notify	Integer32	Integer32 (1..4094)	STG count of the LPU.	As per the MIB.

hh3cMstiMpuStgNum (1.3.6.1.4.1.25506.8.35.14.22.5)

Object (OID)	Access	Syntax	Value range	Description	Implementation
hh3cMstiMpuStgNum (1.3.6.1.4.1.25506.8.35.14.22.5)	accessible-for-notify	Integer32	Integer32 (1..4094)	STG count of the MPU.	As per the MIB.

hh3cMstiVlanID (1.3.6.1.4.1.25506.8.35.14.22.6)

Object (OID)	Access	Syntax	Value range	Description	Implementation
hh3cMstiVlanID (1.3.6.1.4.1.25506.8.35.14.22.6)	accessible-for-notify	Integer32	Integer32 (1..4094)	VLAN ID.	As per the MIB.

hh3cMstiBridgeIDInPdu (1.3.6.1.4.1.25506.8.35.14.22.7)

Object (OID)	Access	Syntax	Value range	Description	Implementation
hh3cMstiBridgeIDInPdu (1.3.6.1.4.1.25506.8.35.14.22.7)	accessible-for-notify	BridgeId	OCTET STRING (8)	Bridge ID carried in low-priority BPDUs.	As per the MIB.

hh3cMstiPortPriorityInPdu (1.3.6.1.4.1.25506.8.35.14.22.8)

Object (OID)	Access	Syntax	Value range	Description	Implementation
hh3cMstiPortPriorityInPdu (1.3.6.1.4.1.25506.8.35.14.22.8)	accessible-for-notify	Integer32	Integer32 (1..65535)	Port priority carried in low-priority BPDUs.	As per the MIB.

hh3cMstiPortNumInPdu (1.3.6.1.4.1.25506.8.35.14.22.9)

Object (OID)	Access	Syntax	Value range	Description	Implementation
hh3cMstiPortNumInPdu (1.3.6.1.4.1.25506.8.35.14.22.9)	accessible-for-notify	Integer32	Integer32 (1..65535)	Port ID carried in low-priority BPDUs.	As per the MIB.

Tabular objects

hh3cdot1sVIDAllocationTable

About this table

Use this table to configure MSTP VLAN settings.

Support for operations

Create：Not supported

Edit/Modify：Supported

Delete：Not supported

Read：Supported

Columns

The table index is hh3cdot1sMstVID.

Object (OID)	Access	Syntax	Value range	Description	Implementation
hh3cdot1sMstVID (1.3.6.1.4.1.25506.8.35.14.18.1.1)	read-only	INTEGER	1..4094	VLAN ID	As per the MIB.
hh3cdot1sAdminMstID (1.3.6.1.4.1.25506.8.35.14.18.1.2)	read-write	INTEGER	0..4094	Configured MST region mapping.	As per the MIB.
hh3cdot1sOperMstID (1.3.6.1.4.1.25506.8.35.14.18.1.3)	read-only	INTEGER	0..4094	Effective MST region mapping.	As per the MIB.

hh3cdot1sInstanceTable

About this table

Use this table to configure MST region settings.

Support for operations

Create：Not supported

Edit/Modify：Supported

Delete：Not supported

Read：Supported

Columns

The table index is hh3cdot1sInstanceID.

Object (OID)	Access	Syntax	Value range	Description	Implementation
hh3cdot1sInstanceID (1.3.6.1.4.1.25506.8.35.14.19.1.1)	read-only	INTEGER	0..4094	Instance ID.	As per the MIB.
hh3cdot1sMstiBridgeID (1.3.6.1.4.1.25506.8.35.14.19.1.2)	read-only	BridgeId	OCTET STRING (8)	Bridge ID.	As per the MIB.
hh3cdot1sMstiBridgePriority (1.3.6.1.4.1.25506.8.35.14.19.1.3)	read-write	INTEGER	0..61440	Bridge priority.	As per the MIB.
hh3cdot1sMstiDesignedRoot (1.3.6.1.4.1.25506.8.35.14.19.1.4)	read-only	BridgeId	OCTET STRING (8)	Root bridge.	As per the MIB.
hh3cdot1sMstiRootPathCost (1.3.6.1.4.1.25506.8.35.14.19.1.5)	read-only	INTEGER	Standard MIB values.	Path cost from the MSTI to the root bridge.	As per the MIB.
hh3cdot1sMstiRootPort (1.3.6.1.4.1.25506.8.35.14.19.1.6)	read-only	INTEGER	Standard MIB values.	Root port.	As per the MIB.
hh3cdot1sMstiRootType (1.3.6.1.4.1.25506.8.35.14.19.1.7)	read-write	INTEGER	normal(0) secondary(1) primary(2)	Root bridge type.	As per the MIB.
hh3cdot1sMstiRemainingHops (1.3.6.1.4.1.25506.8.35.14.19.1.8)	read-only	INTEGER	Standard MIB values.	Remaining hops.	As per the MIB.
hh3cdot1sMstiAdminMappedVlanListLow (1.3.6.1.4.1.25506.8.35.14.19.1.9)	read-only	OCTET STRING	SIZE (0..256)	Lower part of the VLAN ID list mapped to the instance.	As per the MIB.
hh3cdot1sMstiAdminMappedVlanListHigh (1.3.6.1.4.1.25506.8.35.14.19.1.10)	read-only	OCTET STRING	SIZE (0..256)	Higher part of the VLAN ID list mapped to the instance.	As per the MIB.
hh3cdot1sMstiOperMappedVlanListLow (1.3.6.1.4.1.25506.8.35.14.19.1.11)	read-only	OCTET STRING	SIZE (0..256)	Lower part of the effective VLAN ID list.	As per the MIB.
hh3cdot1sMstiOperMappedVlanListHigh (1.3.6.1.4.1.25506.8.35.14.19.1.12)	read-only	OCTET STRING	SIZE (0..256)	Higher part of the effective VLAN ID list.	As per the MIB.

hh3cdot1sPortTable

About this table

Use this table to configure MSTP on ports.

Support for operations

Create：Not supported

Edit/Modify：Supported

Delete：Not supported

Read：Supported

Columns

The table indexes are hh3cdot1sInstanceID and hh3cdot1sMstiPortIndex.

Object (OID)	Access	Syntax	Value range	Description	Implementation
hh3cdot1sMstiPortIndex (1.3.6.1.4.1.25506.8.35.14.20.1.1)	read-only	INTEGER	(0..65535)	Port index.	As per the MIB.
hh3cdot1sMstiState (1.3.6.1.4.1.25506.8.35.14.20.1.2)	read-only	INTEGER	disabled(1) discarding(2) learning(4) forwarding(5)	Port status.	Does not support disabled.
hh3cdot1sMstiPortPriority (1.3.6.1.4.1.25506.8.35.14.20.1.3)	read-write	INTEGER	0..240	Port priority.	As per the MIB.
hh3cdot1sMstiPathCost (1.3.6.1.4.1.25506.8.35.14.20.1.4)	read-write	INTEGER	1..200000000	Port path cost.	As per the MIB.
hh3cdot1sMstiDesignatedRoot (1.3.6.1.4.1.25506.8.35.14.20.1.5)	read-only	BridgeId	OCTET STRING (8)	Root bridge.	As per the MIB.
hh3cdot1sMstiDesignatedCost (1.3.6.1.4.1.25506.8.35.14.20.1.6)	read-only	INTEGER	Standard MIB values.	Path cost of the designated port.	As per the MIB.
hh3cdot1sMstiDesignatedBridge (1.3.6.1.4.1.25506.8.35.14.20.1.7)	read-only	BridgeId	OCTET STRING (8)	Designated bridge.	As per the MIB.
hh3cdot1sMstiDesignatedPort (1.3.6.1.4.1.25506.8.35.14.20.1.8)	read-only	OCTET STRING	SIZE (2)	Designated port.	As per the MIB.
hh3cdot1sMstiMasterBridgeID (1.3.6.1.4.1.25506.8.35.14.20.1.9)	read-only	BridgeId	OCTET STRING (8)	Master bridge.	As per the MIB.
hh3cdot1sMstiMasterPortCost (1.3.6.1.4.1.25506.8.35.14.20.1.10)	read-only	INTEGER	Standard MIB values.	Path cost to the master bridge.	As per the MIB.
hh3cdot1sMstiStpPortEdgeport (1.3.6.1.4.1.25506.8.35.14.20.1.11)	read-write	EnabledStatus	enabled(1) disabled(2)	Whether the port is an edge port.	As per the MIB.
hh3cdot1sMstiStpPortPointToPoint (1.3.6.1.4.1.25506.8.35.14.20.1.12)	read-write	INTEGER	forceTrue(1) forceFalse(2) auto(3)	Whether to set the port link type to point-to-point.	As per the MIB.
hh3cdot1sMstiStpMcheck (1.3.6.1.4.1.25506.8.35.14.20.1.13)	read-write	INTEGER	enable(1) unused(65535)	Perform mCheck.	As per the MIB.
hh3cdot1sMstiStpTransLimit (1.3.6.1.4.1.25506.8.35.14.20.1.14)	read-write	INTEGER	1..255	BPDU transmission rate.	Default: 10.
hh3cdot1sMstiStpRXStpBPDU (1.3.6.1.4.1.25506.8.35.14.20.1.15)	read-only	Counter32	Standard MIB values.	Incoming BPDU count.	As per the MIB.
hh3cdot1sMstiStpTXStpBPDU (1.3.6.1.4.1.25506.8.35.14.20.1.16)	read-only	Counter32	Standard MIB values.	Outgoing BPDU count.	As per the MIB.
hh3cdot1sMstiStpRXTCNBPDU (1.3.6.1.4.1.25506.8.35.14.20.1.17)	read-only	Counter32	Standard MIB values.	Incoming TCN BPDU count.	As per the MIB.
hh3cdot1sMstiStpTXTCNBPDU (1.3.6.1.4.1.25506.8.35.14.20.1.18)	read-only	Counter32	Standard MIB values.	Outgoing TCN BPDU count.	As per the MIB.
hh3cdot1sMstiStpRXRSTPBPDU (1.3.6.1.4.1.25506.8.35.14.20.1.19)	read-only	Counter32	Standard MIB values.	Incoming RSTP BPDU count.	As per the MIB.
hh3cdot1sMstiStpTXRSTPBPDU (1.3.6.1.4.1.25506.8.35.14.20.1.20)	read-only	Counter32	Standard MIB values.	Outgoing RSTP BPDU count.	As per the MIB.
hh3cdot1sMstiStpRXMSTPBPDU (1.3.6.1.4.1.25506.8.35.14.20.1.21)	read-only	Counter32	Standard MIB values.	Incoming MSTP BPDU count.	As per the MIB.
hh3cdot1sMstiStpTXMSTPBPDU (1.3.6.1.4.1.25506.8.35.14.20.1.22)	read-only	Counter32	Standard MIB values.	Outgoing MSTP BPDU count.	As per the MIB.
hh3cdot1sMstiStpClearStatistics (1.3.6.1.4.1.25506.8.35.14.20.1.23)	read-write	INTEGER	clear(1) unused(65535)	Clear packet statistics.	As per the MIB.
hh3cdot1sMstiStpDefaultPortCost (1.3.6.1.4.1.25506.8.35.14.20.1.24)	read-write	INTEGER	enable(1) unused(65535)	Default port path cost.	As per the MIB.
hh3cdot1sMstiStpStatus (1.3.6.1.4.1.25506.8.35.14.20.1.25)	read-write	EnabledStatus	enabled(1) disabled(2)	Spanning tree feature status.	As per the MIB.
hh3cdot1sMstiPortRootGuard (1.3.6.1.4.1.25506.8.35.14.20.1.26)	read-write	EnabledStatus	enabled(1) disabled(2)	Root guard status.	As per the MIB.
hh3cdot1sMstiPortLoopGuard (1.3.6.1.4.1.25506.8.35.14.20.1.27)	read-write	EnabledStatus	enabled(1) disabled(2)	Loop guard status.	As per the MIB.
hh3cdot1sMstiStpPortSendingBPDUType (1.3.6.1.4.1.25506.8.35.14.20.1.28)	read-only	INTEGER	stp(1) rstp(2) mstp(3)	BPDU type.	As per the MIB.
hh3cdot1sMstiStpOperPortPointToPoint (1.3.6.1.4.1.25506.8.35.14.20.1.29)	read-only	TruthValue	true(1) false(2)	Whether the port link type is point-to-point.	As per the MIB.
hh3cdot1sMstiStpPortAdminBPDUFmt (1.3.6.1.4.1.25506.8.35.14.20.1.30)	read-write	Hh3cdot1sFormatStatus	legacy(1) dot1s(2) auto(3)	Set the mode used by the port to recognize and send MSTP BPDUs.	legacy—The port receives and sends only compatible-format MSTP BPDUs. dot1s—The port receives and sends only standard-format (802.1s-compliant) MSTP BPDUs. auto—The port recognizes the MSTP BPDU format automatically and determines the format of MSTP BPDUs to send accordingly. This mode takes effect only on the CIST.
hh3cdot1sMstiStpPortOperBPDUFmt (1.3.6.1.4.1.25506.8.35.14.20.1.31)	read-only	Hh3cdot1sFormatStatus	legacy(1) dot1s(2) auto(3)	Read the mode used by the port to send MSTP BPDUs.	legacy—The port sends only compatible-format MSTP BPDUs. dot1s—The port sends only standard-format (802.1s-compliant) MSTP BPDUs. auto—The port recognizes the MSTP BPDU format automatically and determines the format of MSTP BPDUs to send accordingly. This mode takes effect only on the CIST.
hh3cdot1sMstiStpPortRoleRestriction(1.3.6.1.4.1.25506.8.35.14.20.1.32)	read-write	EnabledStatus	enabled(1) disabled(2)	Port role restriction status.	As per the MIB.
hh3cdot1sMstiStpPortTcRestriction(1.3.6.1.4.1.25506.8.35.14.20.1.33)	read-write	EnabledStatus	enabled(1) disabled(2)	TC-BPDU transmission restriction status.	As per the MIB.
hh3cdot1sMstiStpPortDisputed(1.3.6.1.4.1.25506.8.35.14.20.1.34)	read-only	TruthValue	true(1) false(2)	Dispute guard status.	As per the MIB.

Notifications

hh3cPortMstiStateForwarding

Basic information

OID	Event	Type	Severity	Recovery notification	Default status
1.3.6.1.4.1.25506.8.35.14.0.1	A port transits to the forwarding state.	Informational	Warning	-	OFF

Notification triggers

This notification might be generated when a port transits to the forwarding state in the following situations:

The network topology changes after a new link is added.

The network topology changes after a port comes up or goes down.

System impact

The network topology changes.

Status control

CLI: Use the stp port-log command.

OFF

CLI: Use the undo stp port-log command.

Object

OID (object name)

Description

Index

Type

Value range

1.3.6.1.4.1.25506.8.35.14.19.1.1 (hh3cdot1sInstanceID)

Instance ID.

hh3cdot1sInstanceID

INTEGER

0..4094

1.3.6.1.4.1.25506.8.35.14.20.1.1 (hh3cdot1sMstiPortIndex)

Port index.

hh3cdot1sInstanceID

hh3cdot1sMstiPortIndex

INTEGER

1..65535

Recommended action

To resolve this issue:

1.Check for link failures after the network topology becomes stable.

2.Identify whether the spanning tree feature is enabled on a new physical link.

3.Identify whether a spanning tree-enabled port in the network topology has come up or gone down.

4.Collect alarm information and configuration data, and then contact H3C Support for help.

hh3cPortMstiStateDiscarding

Basic information

OID	Event	Type	Severity	Recovery notification	Default status
1.3.6.1.4.1.25506.8.35.14.0.2	A port transits to the discarding state.	Informational	Warning	-	OFF

Notification triggers

This notification might be generated when a port transits to the discarding state in the following situations:

The network topology changes.

The network topology is recalculated after a new link is added.

System impact

The network topology changes.

Status control

CLI: Use the stp port-log command.

OFF

CLI: Use the undo stp port-log command.

Object

OID (object name)

Description

Index

Type

Value range

1.3.6.1.4.1.25506.8.35.14.19.1.1 (hh3cdot1sInstanceID)

Instance ID.

hh3cdot1sInstanceID

INTEGER

0..4094

1.3.6.1.4.1.25506.8.35.14.20.1.1 (hh3cdot1sMstiPortIndex)

Port index.

hh3cdot1sInstanceID

hh3cdot1sMstiPortIndex

INTEGER

1..65535

Recommended action

To resolve this issue:

1.Identify whether a new physical link is added in the spanning tree network after the network topology becomes stable.

2.Collect alarm information and configuration data, and then contact H3C Support for help.

hh3cBridgeLostRootPrimary

Basic information

OID	Event	Type	Severity	Recovery notification	Default status
1.3.6.1.4.1.25506.8.35.14.0.3	The device loses its root bridge role after another device is elected as root bridge.	Informational	Warning	-	ON

Notification triggers

This notification might be generated when the device loses its root bridge role after another device is elected as root bridge in the following situations:

A new link is added to the network topology.

The priority of a device changes in the network topology.

System impact

The network topology might not be presented as expected.

Status control

This notification cannot be disabled.

Object

OID (object name)	Description	Index	Type	Value range
1.3.6.1.4.1.25506.8.35.14.19.1.1 (hh3cdot1sInstanceID)	Instance ID.	hh3cdot1sInstanceID	INTEGER	0..4094

Recommended action

To resolve this issue:

1.Identify whether a new physical link is added in the spanning tree network.

2.Identify whether a priority change operation has been performed and verify that the operation is correct.

3.Collect alarm information and configuration data, and then contact H3C Support for help.

hh3cPortMstiRootGuarded

Basic information

OID	Event	Type	Severity	Recovery notification	Default status
1.3.6.1.4.1.25506.8.35.14.0.4	A root guard-enabled port receives a configuration BPDU with a higher priority.	Informational	Warning	-	OFF

Notification triggers

This notification might be generated when the following events occur:

A root guard-enabled port receives a configuration BPDU with a priority higher than the current bridge.

The priority of a device in the network topology changes.

System impact

The network topology might not be presented as expected.

Status control

CLI: Use the stp root-protection command.

MIB: Set hh3cdot1sMstiPortRootGuard to true(1).

OFF

MIB: Set hh3cdot1sMstiPortRootGuard to false(2).

Object

OID (object name)

Description

Index

Type

Value range

1.3.6.1.4.1.25506.8.35.14.19.1.1 (hh3cdot1sInstanceID)

Instance ID.

hh3cdot1sInstanceID

INTEGER

0..4094

1.3.6.1.4.1.25506.8.35.14.20.1.1 (hh3cdot1sMstiPortIndex)

Port index.

hh3cdot1sInstanceID

hh3cdot1sMstiPortIndex

INTEGER

1..65535

Recommended action

To resolve this issue:

1.Identify whether a new physical link is added in the spanning tree network.

2.Identify whether a priority change operation has been performed and verify that the operation is correct.

3.Collect alarm information and configuration data, and then contact H3C Support for help.

hh3cPortMstiBpduGuarded

Basic information

OID	Event	Type	Severity	Recovery notification	Default status
1.3.6.1.4.1.25506.8.35.14.0.5	A BPDU guard-enabled edge port receives configuration BPDUs.	Informational	Warning	-	OFF

Notification triggers

This notification is generated when a BPDU guard-enabled edge port receives configuration BPDUs.

System impact

The user network connected to the port is interrupted.

Status control

CLI: Use the stp bpdu-protection command.

MIB: Set hh3cdot1sMstBpduGuard to true(1).

OFF

MIB: Set hh3cdot1sMstBpduGuard to false(2).

Object

OID (object name)	Description	Index	Type	Value range
1.3.6.1.2.1.17.2.15.1.1 (dot1dStpPort)	Port index.	dot1dStpPort	INTEGER	1..65535

Recommended action

To resolve this issue:

● Verify that the downstream device is an endpoint device.

● Check for possible attacks from other devices.

hh3cPortMstiLoopGuarded

Basic information

OID	Event	Type	Severity	Recovery notification	Default status
1.3.6.1.4.1.25506.8.35.14.0.6	An alternate port or root port does not receive a BPDU upon BPDU reception timeout.	Informational	Warning	-	OFF

Notification triggers

This notification might be generated when an alternate port or root port does not receive a BPDU upon BPDU reception timeout in the following situations:

The peer port does not send a BPDU to the local end before the BPDU reception time expires. The spanning tree feature might be disabled on the peer port.

The link connected to the peer end is congested. Verify that traffic can be forwarded correctly.

System impact

The alternate port or root port cannot forward service traffic.

Status control

CLI: Use the stp loop-protection command.

MIB: Set hh3cdot1sMstiPortLoopGuard to true(1).

OFF

MIB: Set hh3cdot1sMstiPortLoopGuard to false(2).

Object

OID (object name)

Description

Index

Type

Value range

1.3.6.1.4.1.25506.8.35.14.19.1.1 (hh3cdot1sInstanceID)

Instance ID.

hh3cdot1sInstanceID

INTEGER

0..4094

1.3.6.1.4.1.25506.8.35.14.20.1.1 (hh3cdot1sMstiPortIndex)

Port index.

hh3cdot1sInstanceID

hh3cdot1sMstiPortIndex

INTEGER

1..65535

Recommended action

To resolve this issue:

● Verify that the spanning tree status of the upstream device is correct.

● Check for possible attacks from other devices.

hh3cMstiNewRoot

Basic information

OID	Event	Type	Severity	Recovery notification	Default status
1.3.6.1.4.1.25506.8.35.14.0.7	A new root bridge is elected.	Informational	Warning	-	OFF

Notification triggers

This notification might be generated when a new root bridge is elected in the following situations:

The current bridge joins a new network topology.

The priority of the current bridge increases.

The original root bridge fails.

The priority of the original root bridge decreases.

System impact

The network topology changes. Service traffic loss might occur.

Status control

CLI: Use the snmp trap enable stp new-root command.

OFF

CLI: Use the undo snmp trap enable stp new-root command.

Object

OID (object name)	Description	Index	Type	Value range
1.3.6.1.4.1.25506.8.35.14.19.1.1 (hh3cdot1sInstanceID)	Instance ID.	hh3cdot1sInstanceID	INTEGER	0..4094
1.3.6.1.4.1.25506.8.35.14.19.1.4 (hh3cdot1sMstiDesignedRoot)	Root bridge information.	hh3cdot1sInstanceID	BridgeId
1.3.6.1.4.1.25506.8.35.14.19.1.4 (hh3cdot1sMstiDesignedRoot)	Root bridge information.	hh3cdot1sInstanceID	BridgeId

Recommended action

To resolve this issue:

● Verify that the bridge priority configuration on devices is correct.

● Check for possible attacks from other devices.

hh3cMstiTopologyChange

Basic information

OID	Event	Type	Severity	Recovery notification	Default status
1.3.6.1.4.1.25506.8.35.14.0.9	The network topology changes after the spanning tree state of ports changes.	Informational	Warning	-	ON

Notification triggers

This notification might be generated when the spanning tree state changes of ports cause network topology changes in the following situations:

The network topology changes after a new link is added.

The network topology changes after a port comes up or goes down.

The network topology changes after the priority of a device changes.

Network topology change causes discarding port change after the cost value or priority of a port is changed.

System impact

The network topology changes. Service traffic loss might occur.

Status control

This notification cannot be disabled.

Object

OID (object name)	Description	Index	Type	Value range
1.3.6.1.4.1.25506.8.35.14.19.1.1 (hh3cdot1sInstanceID)	Instance ID.	hh3cdot1sInstanceID	INTEGER	0..4094

Recommended action

To resolve this issue:

1.Identify whether a new physical link is added in the spanning tree network.

2.Identify whether a spanning tree-enabled port has come up or gone down in the network topology.

3.Collect alarm information and configuration data, and then contact H3C Support for help.

hh3cPortMstiLostEdge

Basic information

OID	Event	Type	Severity	Recovery notification	Default status
1.3.6.1.4.1.25506.8.35.14.0.10	An edge port receives BPDUs.	Informational	Warning	-	ON

Notification triggers

This notification is generated when an edge port receives BPDUs and becomes a non-edge port.

System impact

The network topology might change.

Status control

This notification cannot be disabled.

Object

OID (object name)	Description	Index	Type	Value range
1.3.6.1.4.1.25506.8.35.14.20.1.1 (hh3cdot1sMstiPortIndex)	Port number.	hh3cdot1sMstiPortIndex	INTEGER	1..65535
1.3.6.1.2.1.2.2.1.2 (ifDescr)	Interface name.	ifIndex	OCTET STRING	OCTET STRING(0..255)
1.3.6.1.4.1.25506.8.35.14.19.1.1 (hh3cdot1sInstanceID)	Instance ID.	hh3cdot1sInstanceID	INTEGER	0..4094

Recommended action

To resolve this issue:

1.Verify that the peer network attached to the edge port has changed and identify whether the received BPDUs are malicious attack packets.

2.Collect alarm information and configuration data, and then contact H3C Support for help.

hh3cMstiTcGuarded

Basic information

OID	Event	Type	Severity	Recovery notification	Default status
1.3.6.1.4.1.25506.8.35.14.0.11	The number of TC-BPDUs received by the device exceeds the upper threshold.	Informational	Warning	-	ON

Notification triggers

This notification is generated when the number of TC-BPDUs received by the device exceeds the upper threshold within a TC-BPDU protection period.

System impact

The excessive TC-BPDUs do not immediately cause MAC and ARP entry deletion. The network topology does not change immediately.

Status control

CLI: Use the stp tc-protection command.

OFF

CLI: Use the undo stp tc-protection command.

Object

OID (object name)	Description	Index	Type	Value range
1.3.6.1.4.1.25506.8.35.14.19.1.1 (hh3cdot1sInstanceID)	Instance ID.	hh3cdot1sInstanceID	INTEGER	0..4094

Recommended action

To resolve this issue:

1.Identify whether the network topology is flapping.

2.Identify whether malicious attacks exist.

3.Collect alarm information and configuration data, and then contact H3C Support for help.

hh3cMstiProTcGuarded

Basic information

OID	Event	Type	Severity	Recovery notification	Default status
1.3.6.1.4.1.25506.8.35.14.0.12	The number of TC-BPDUs received by the device exceeds the upper threshold.	Informational	Warning	-	ON

Notification triggers

This notification is generated when the number of TC-BPDUs received by the device exceeds the upper threshold within a TC-BPDU protection period.

System impact

The excessive TC-BPDUs do not immediately cause MAC and ARP entry deletion. The network topology does not change immediately.

Status control

CLI: Use the stp tc-protection command.

OFF

CLI: Use the undo stp tc-protection command.

Object

OID (object name)	Description	Index	Type	Value range
1.3.6.1.4.1.25506.8.35.14.19.1.1 (hh3cdot1sInstanceID)	Instance ID.	hh3cdot1sInstanceID	INTEGER	0..4094
1.3.6.1.4.1.25506.8.35.14.22.1 (hh3cMstiTcGuardVal)	Upper threshold	N/A	Integer32	Integer32 (1..255)

Recommended action

To resolve this issue:

1.Identify whether the network topology is flapping.

2.Identify whether malicious attacks exist.

hh3cPortPvstPvidInconsistent

Basic information

OID	Event	Type	Severity	Recovery notification	Default status
1.3.6.1.4.1.25506.8.35.14.0.17	PVID inconsistency.	Informational	Warning	N/A (N/A)	OFF

Notification triggers

This notification is generated when an interface receives a BPDU with a different PVID.

System impact

PVST calculation errors might occur.

Status control

CLI: Use the stp ignore-pvid-inconsistency command.

OFF

CLI: Use the undo stp ignore-pvid-inconsistency command.

Object

OID (object name)	Description	Index	Type	Value range
1.3.6.1.4.1.25506.8.35.14.22.2 (hh3cPvstPvid)	PVID.	N/A	Integer32	Integer32 (1..4094)
1.3.6.1.4.1.25506.8.35.14.22.3 (hh3cPvstPvidInPdu)	PVID in packets.	N/A	Integer32	Integer32 (1..4094)
1.3.6.1.2.1.2.2.1.2 (ifDescr)	Interface name.	ifIndex	OCTET STRING	OCTET STRING (0..255)

Recommended action

To resolve this issue:

1.Identify whether different PVIDs are required on two connected ports:

- If yes, use the stp ignore-pvid-inconsistency command to disable inconsistent PVID protection.

- If no, modify the different PVIDs to be the same.

hh3cPortPvstPortTypeInconsistent

Basic information

OID	Event	Type	Severity	Recovery notification	Default status
1.3.6.1.4.1.25506.8.35.14.0.18	Port type inconsistency.	Informational	Warning	N/A (N/A)	OFF

Notification triggers

This notification is generated when an access port receives a PVST BPDU from a trunk or hybrid port.

System impact

PVST calculation errors might occur.

Status control

This notification cannot be disabled.

Object

OID (object name)

Description

Index

Type

Value range

1.3.6.1.4.1.25506.8.35.14.22.6

(hh3cMstiVlanID)

VLAN ID.

N/A

Integer32

Integer32 (1..4094)

1.3.6.1.2.1.2.2.1.2 (ifDescr)

Interface name.

ifIndex

OCTET STRING

OCTET STRING (0..255)

Recommended action

To resolve this issue:

1.Identify whether the port types of the two ends are the same:

- If yes, proceed to step 2.

- If no, modify the port types to be the same. If the issue persists, proceed to step 2.

2.Collect alarm information, log messages, and configuration data, and then contact H3C Support for help.

06-Layer 2 - LAN Switching

About this table

Support for operations

Columns

About this table

Support for operations

Columns

About this table

Support for operations

Columns

Basic information

Notification triggers

System impact

Status control

Object

Recommended action

Basic information

Notification triggers

System impact

Status control

Object

Recommended action

Basic information

Notification triggers

System impact

Status control

Object

Recommended action

Basic information

Notification triggers

System impact

Status control

Object

Recommended action

Basic information

Notification triggers

System impact

Status control

Object

Recommended action

Basic information

Notification triggers

System impact

Status control

Object

Recommended action

Basic information

Notification triggers

System impact

Status control

Object

Recommended action

Basic information

Notification triggers

System impact

Status control

Object

Recommended action

Basic information

Notification triggers

System impact

Status control

Object

Recommended action

Basic information

Notification triggers

System impact

Status control

Object

Recommended action

Basic information

Notification triggers

System impact

Status control

Object

Recommended action

Basic information

Notification triggers

System impact

Status control