Login
- Table of Contents
-
- 05-Layer 2 - LAN Switching
- 01-BRIDGE-MIB
- 02-EtherLike-MIB
- 03-HH3C-LAG-MIB
- 04-HH3C-LPBKDT-MIB
- 05-HH3C-LswMAM-MIB
- 06-HH3C-LswMSTP-MIB
- 07-HH3C-PVST-MIB
- 08-HH3C-VLANGROUP-MIB
- 09-HH3C-LswVLAN-MIB
- 10-IEEE8023-LAG-MIB
- 11-LLDP-EXT-MED-MIB
- 12-LLDP-EXT-DOT1-MIB
- 13-LLDP-EXT-DOT1-V2-MIB
- 14-LLDP-EXT-DOT3-MIB
- 15-LLDP-EXT-DOT3-V2-MIB
- 16-LLDP-MIB
- 17-LLDP-V2-MIB
- 18-MAU-MIB
- 19-P-BRIDGE-MIB
- 20-Q-BRIDGE-MIB
- 21-RBRIDGE-MIB
- Related Documents
-
| Title | Size | Download |
|---|---|---|
| 20-Q-BRIDGE-MIB | 86.94 KB |
Contents
dot1qConstraintTypeDefault (1.3.6.1.2.1.17.7.1.4.10)
dot1qVlanVersionNumber (1.3.6.1.2.1.17.7.1.1.1)
dot1qMaxVlanId (1.3.6.1.2.1.17.7.1.1.2)
dot1qMaxSupportedVlans (1.3.6.1.2.1.17.7.1.1.3)
dot1qNumVlans (1.3.6.1.2.1.17.7.1.1.4)
Q-BRIDGE-MIB
About this MIB
Use this MIB to manage Virtual Bridged Local Area Networks, as defined by IEEE 802.1Q-2003.
MIB file name
rfc4363-qbridge.mib
Root object
iso(1).org(3).dod(6).internet(1).mgmt(2).mib-2(1).dot1dBridge(17).qBridgeMIB(7)
Scalar objects
dot1qConstraintTypeDefault (1.3.6.1.2.1.17.7.1.4.10)
|
Object (OID) |
Access |
Syntax |
Value range |
Description |
Implementation |
|
dot1qConstraintTypeDefault (1.3.6.1.2.1.17.7.1.4.10) |
read-write |
INTEGER |
independent(1) shared(2) |
The type of constraint set to which a VLAN belongs. |
Supports only the read operation. |
dot1qVlanVersionNumber (1.3.6.1.2.1.17.7.1.1.1)
|
Object (OID) |
Access |
Syntax |
Value range |
Description |
Implementation |
|
dot1qVlanVersionNumber (1.3.6.1.2.1.17.7.1.1.1) |
read-only |
INTEGER |
version1(1) |
The version number of IEEE 802.1Q that this device supports. |
As per the MIB. |
dot1qMaxVlanId (1.3.6.1.2.1.17.7.1.1.2)
|
Object (OID) |
Access |
Syntax |
Value range |
Description |
Implementation |
|
dot1qMaxVlanId (1.3.6.1.2.1.17.7.1.1.2) |
read-only |
VlanId |
Standard MIB values. |
The maximum IEEE 802.1Q VLAN ID that this device supports. |
As per the MIB. |
dot1qMaxSupportedVlans (1.3.6.1.2.1.17.7.1.1.3)
|
Object (OID) |
Access |
Syntax |
Value range |
Description |
Implementation |
|
dot1qMaxSupportedVlans (1.3.6.1.2.1.17.7.1.1.3) |
read-only |
Unsigned32 |
Standard MIB values. |
The maximum number of IEEE 802.1Q VLANs that this device supports. |
As per the MIB. |
dot1qNumVlans (1.3.6.1.2.1.17.7.1.1.4)
|
Object (OID) |
Access |
Syntax |
Value range |
Description |
Implementation |
|
dot1qNumVlans (1.3.6.1.2.1.17.7.1.1.4) |
read-only |
Unsigned32 |
Standard MIB values. |
The current number of IEEE 802.1Q VLANs that are configured in this device. |
As per the MIB. |
Tabular objects
dot1qVlanStaticTable
About this table
Use this table to obtain static configuration information for each VLAN configured into the device.
Support for operations
Create：Supported
Edit/Modify：Not supported
Delete：Not supported
Read：Supported
Columns
The table index is dot1qVlanIndex.
|
Object (OID) |
Access |
Syntax |
Value range |
Description |
Implementation |
|
dot1qVlanStaticUntaggedPorts (1.3.6.1.2.1.17.7.1.4.3.1.4) |
read-create |
PortList |
Standard MIB values. |
The set of ports that should transmit egress packets for this VLAN as untagged. |
As per the MIB. |
|
dot1qVlanStaticRowStatus (1.3.6.1.2.1.17.7.1.4.3.1.5) |
read-create |
RowStatus |
Standard MIB values. |
Status of this VLAN. |
Supports only active(1), createAndgo(4) and destroy(6). You cannot delete the default VLAN. |
dot1qPortVlanTable
About this table
Use this table to obtain per-port control and status information for VLAN configuration in the device.
Support for operations
Create：Not supported
Edit/Modify：Supported
Delete：Not supported
Read：Supported
Columns
The table index is ifIndex.
|
Object (OID) |
Access |
Syntax |
Value range |
Description |
Implementation |
|
dot1qPvid (1.3.6.1.2.1.17.7.1.4.5.1.1) |
read-write |
VlanIndex |
Standard MIB values. |
The PVID, the VLAN ID assigned to untagged frames received on this port. |
Does not support the write operation on an access port. |
|
dot1qPortAcceptableFrameTypes (1.3.6.1.2.1.17.7.1.4.5.1.2) |
read-write |
INTEGER |
admitAll(1) admitOnlyVlanTagged(2) |
Packet types that this port can receive: admitOnlyVlanTagged(2)—Drop untagged packets. admitAll(1)—Accept untagged packets and assign them the PVID. |
Supports only the read operation. |
|
dot1qPortIngressFiltering (1.3.6.1.2.1.17.7.1.4.5.1.3) |
read-write |
TruthValue |
true(1), false(2) |
When this is true(1), the device will discard incoming frames for VLANs that do not include this port in its member set. When false(2), the port will accept all incoming frames. |
Supports only the read operation. |
