Login
- Table of Contents
-
- H3C SecPath Security Products FAQ(V7)-6W101
- 00-Preface
- 01-AFT FAQ
- 02-Anti-virus FAQ
- 03-Application audit and management FAQ
- 04-APR FAQ
- 05-ASPF FAQ
- 06-Attack detection and prevention FAQ
- 07-Bandwidth management FAQ
- 08-Data analysis center FAQ
- 09-Data filtering FAQ
- 10-Device forwarding FAQ
- 11-DPI FAQ
- 12-FAQ on Intranet security comprehensive scoring (Security overview)
- 13-File filtering FAQ
- 14-IPsec FAQ
- 15-IPS FAQ
- 16-IRF FAQ
- 17-License management FAQ
- 18-Load balancing FAQ
- 19-Mirroring FAQ
- 20-NAT FAQ
- 21-NetShare control FAQ
- 22-PKI FAQ
- 23-RBM-based hot backup FAQ
- 24-Security zone FAQ
- 25-Security policy FAQ
- 26-SSL decryption FAQ
- 27-SSL VPN FAQ
- 28-System management and maintenance FAQ
- 29-URL filtering FAQ
- 30-User access and authentication FAQ
- 31-WAF FAQ
- 32-Web operations FAQ
- Related Documents
-
| Title | Size | Download |
|---|---|---|
| 32-Web operations FAQ | 17.43 KB |
Web operation FAQ
Q. Why is the device version displayed on the Web interface sometimes inconsistent with the current version after the device is upgraded or downgraded?
Browsers have a caching mechanism that stores previously requested data on the device to speed up browsing. When a visitor requests the same page again, the browser can display the data from the local disk. After the device version is updated, the currently cached files might not be consistent with the webpage of the device. To ensure data consistency between the device and the local, clear the cache to allow the browser to request data from the device again.
Q. Why are the Web traffic logging and traffic statistics pages are empty even though the device has forwarded traffic?
To use traffic logging and traffic statistics features, execute the session statistics enable command to enable session statistics collection for software fast forwarding.
Q. Why does traffic monitoring display no data and fail to be updated in real time?
The auto refresh feature is not enabled. You need to manually click the refresh button or enable auto refresh as follows:
1. Click the set icon in the upper right corner of the corresponding widget.
2. Enable auto fresh and set the auto refresh interval to 10 to 180 seconds.
