Login
- Table of Contents
-
- H3C SecPath Security Products FAQ(V7)-6W101
- 00-Preface
- 01-AFT FAQ
- 02-Anti-virus FAQ
- 03-Application audit and management FAQ
- 04-APR FAQ
- 05-ASPF FAQ
- 06-Attack detection and prevention FAQ
- 07-Bandwidth management FAQ
- 08-Data analysis center FAQ
- 09-Data filtering FAQ
- 10-Device forwarding FAQ
- 11-DPI FAQ
- 12-FAQ on Intranet security comprehensive scoring (Security overview)
- 13-File filtering FAQ
- 14-IPsec FAQ
- 15-IPS FAQ
- 16-IRF FAQ
- 17-License management FAQ
- 18-Load balancing FAQ
- 19-Mirroring FAQ
- 20-NAT FAQ
- 21-NetShare control FAQ
- 22-PKI FAQ
- 23-RBM-based hot backup FAQ
- 24-Security zone FAQ
- 25-Security policy FAQ
- 26-SSL decryption FAQ
- 27-SSL VPN FAQ
- 28-System management and maintenance FAQ
- 29-URL filtering FAQ
- 30-User access and authentication FAQ
- 31-WAF FAQ
- 32-Web operations FAQ
- Related Documents
-
28-System management and maintenance FAQ
| Title | Size | Download |
|---|---|---|
| 28-System management and maintenance FAQ | 18.46 KB |
System management and maintenance FAQ
Q. How can I clear a Telnet connection?
A. Use the free user-interface vty number command in user view to release the connection established on the specified user interface VTY.
Q. Can a Telnet user's username contain an at sign (@)?
A. The username of a Telnet user configured on the device cannot contain an at sign (@).
Q. Can the management Ethernet interface come up even if no IP address is configured for the interface?
A. The management Ethernet interface can be up as long as connections have been established on Layer 2. The software on the device has implemented traffic limit to prevent system malfunction caused by packet bursts.
