A notification sent when the state of a virtual interface changes to Point-to-Point or changes from Point-to-Point to another state. To reduce unnecessary notifications caused by virtual interface up events, no virtual interface state change notification will be sent within 2 times the dead interval since the virtual interface state changes to a value other than DOWN.

【System impact】

Status control

CLI: Use the snmp-agent trap enable ospfv3 virtif-state-change command.

OFF

CLI: Use the undo snmp-agent trap enable ospfv3 virtif-state-change command.

Object

OID (object name)

Description

Index

Type

Value range

1.3.6.1.2.1.191.1.1.1

(ospfv3RouterId)

Unique identifier of a router in an AS.

Ospfv3RouterIdTC

Unsigned32 (1..'FFFFFFFF'h)

1.3.6.1.2.1.191.1.8.1.9 (ospfv3VirtIfState)

Virtual interface state.

INTEGER

down(1), pointToPoint(4)

Recommended action

No action is required.

ospfv3NbrStateChange

Basic information

OID	Event	Type	Severity	Recovery notification	Default status
1.3.6.1.2.1.191.0.2	Neighbor state changes.	Informational	Warning	-	ON

Notification triggers

Notification Triggers

System impact

OID

Event

Type

Severity

Recovery notification

Default status

1.3.6.1.2.1.191.0.2

Neighbor state changes.

Informational

Warning

Description

For DR and BDR, this notification is sent when the state of a neighbor changes to FULL or changes from FULL to another state. For DRother, this notification is sent when the state of a neighbor changes to 2-way or changes from 2-way to another state.

To reduce unnecessary notifications caused by interface up events, no neighbor state change notification will be sent within 2 times the dead interval since the interface state changes to a value other than DOWN.

【System impact】

Status control

CLI: Use the snmp-agent trap enable ospfv3 neighbor-state-change command.

OFF

CLI: Use the undo snmp-agent trap enable ospfv3 neighbor-state-change command.

Object

OID (object name)

Description

Index

Type

Value range

1.3.6.1.2.1.191.1.1.1

(ospfv3RouterId)

Unique identifier of a router in an AS.

Ospfv3RouterIdTC

Unsigned32 (1..'FFFFFFFF'h)

1.3.6.1.2.1.191.1.9.1.8 (ospfv3NbrState)

Neighbor state.

INTEGER

down(1), attempt(2), init(3), twoWay(4), exchangeStart(5), exchange(6), loading(7), full(8)

Recommended action

Check whether the interface state has changed.

ospfv3VirtNbrStateChange

Basic information

OID	Event	Type	Severity	Recovery notification	Default status
1.3.6.1.2.1.191.0.3	Virtual neighbor state changes.	Informational	Warning	-	ON

Notification triggers

Notification Triggers

System impact

OID

Event

Type

Severity

Recovery notification

Default status

1.3.6.1.2.1.191.0.3

Virtual neighbor state changes.

Informational

Warning

Description

A notification sent when the state of a virtual neighbor changes to FULL or changes from FULL to another state. To reduce unnecessary notifications caused by virtual interface up events, no virtual neighbor state change notification will be sent within 2 times the dead interval since the virtual interface state changes to a value other than DOWN.

【System impact】

Status control

CLI: Use the snmp-agent trap enable ospfv3 virtneighbor-state-change command.

OFF

CLI: Use the undo snmp-agent trap enable ospfv3 virtneighbor-state-change command.

Object

OID (object name)

Description

Index

Type

Value range

1.3.6.1.2.1.191.1.1.1

(ospfv3RouterId)

Unique identifier of a router in an AS.

Ospfv3RouterIdTC

Unsigned32 (1..'FFFFFFFF'h)

1.3.6.1.2.1.191.1.11.1.8 (ospfv3VirtNbrState)

Virtual neighbor state.

INTEGER

down(1), attempt(2), init(3), twoWay(4), exchangeStart(5), exchange(6), loading(7), full(8)

Recommended action

No action is required.

ospfv3IfConfigError

Basic information

OID	Event	Type	Severity	Recovery notification	Default status
1.3.6.1.2.1.191.0.4	Interface configuration error.	Informational	Warning	-	ON

Notification triggers

Notification Triggers

System impact

OID

Event

Type

Severity

Recovery notification

Default status

1.3.6.1.2.1.191.0.4

Interface configuration error.

Informational

Warning

Description

A notification sent when a non-virtual interface receives a packet from another router with mismatched configuration.

【System impact】

Status control

CLI: Use the snmp-agent trap enable ospfv3 if-cfg-error command.

OFF

CLI: Use the undo snmp-agent trap enable ospfv3 if-cfg-error command.

Object

OID (object name)	Description	Index	Type	Value range
1.3.6.1.2.1.191.1.1.1 (ospfv3RouterId)	Unique identifier of a router in an AS.	No	Ospfv3RouterIdTC	Unsigned32 (1..'FFFFFFFF'h)
1.3.6.1.2.1.191.1.7.1.12 (ospfv3IfState)	Interface state.	No	INTEGER	down(1), loopback(2), waiting(3), pointToPoint(4), designatedRouter(5), backupDesignatedRouter(6), otherDesignatedRouter(7), standby(8)
1.3.6.1.2.1.191.1.14.3 (ospfv3PacketSrc)	IPv6 packet that cannot be identified by a neighbor.	No	InetAddressIPv6	OCTET STRING (16)
1.3.6.1.2.1.191.1.14.1 (ospfv3ConfigErrorType)	OSPFv3 configuration error type.	No	INTEGER	badVersion(1), areaMismatch(2), unknownNbmaNbr(3), unknownVirtualNbr(4), helloIntervalMismatch(5), deadIntervalMismatch(6), optionMismatch(7), mtuMismatch(8), duplicateRouterId(9), noError(10)
1.3.6.1.2.1.191.1.14.2 (ospfv3PacketType)	OSPFv3 data packet type.	No	INTEGER	hello(1), dbDescript(2), lsReq(3), lsUpdate(4), lsAck(5), nullPacket(6)

Recommended action

Verify that the parameters configured on the interface are consistent with parameters in the hello packets.

ospfv3VirtIfConfigError

Basic information

OID	Event	Type	Severity	Recovery notification	Default status
1.3.6.1.2.1.191.0.5	Virtual interface configuration error.	Error	Warning	-	ON

Notification triggers

Notification Triggers

System impact

OID

Event

Type

Severity

Recovery notification

Default status

1.3.6.1.2.1.191.0.5

Virtual interface configuration error.

Error

Warning

Description

A notification sent when a virtual interface receives a packet from another router with mismatched configuration.

【System impact】

Status control

CLI: Use the snmp-agent trap enable ospfv3 virtif-cfg-error command.

OFF

CLI: Use the undo snmp-agent trap enable ospfv3 virtif-cfg-error command.

Object

OID (object name)	Description	Index	Type	Value range
1.3.6.1.2.1.191.1.1.1 (ospfv3RouterId)	Unique identifier of a router in an AS.	No	Ospfv3RouterIdTC	Unsigned32 (1..'FFFFFFFF'h)
1.3.6.1.2.1.191.1.8.1.9 (ospfv3VirtIfState)	Virtual interface state.	No	INTEGER	down(1), pointToPoint(4)
1.3.6.1.2.1.191.1.14.1 (ospfv3ConfigErrorType)	OSPFv3 configuration error type.	No	INTEGER	badVersion(1), areaMismatch(2), unknownNbmaNbr(3), unknownVirtualNbr(4), helloIntervalMismatch(5), deadIntervalMismatch(6), optionMismatch(7), mtuMismatch(8), duplicateRouterId(9), noError(10)
1.3.6.1.2.1.191.1.14.2 (ospfv3PacketType)	OSPFv3 data packet type.	No	INTEGER	hello(1), dbDescript(2), lsReq(3), lsUpdate(4), lsAck(5), nullPacket(6)

Recommended action

Verify that the parameters configured on the interface are consistent with parameters in the hello packets.

ospfv3IfRxBadPacket

Basic information

OID	Event	Type	Severity	Recovery notification	Default status
1.3.6.1.2.1.191.0.6	A non-virtual interface receives an error packet.	Error	Warning	-	ON

Notification triggers

Notification Triggers

System impact

OID

Event

Type

Severity

Recovery notification

Default status

1.3.6.1.2.1.191.0.6

A non-virtual interface receives an error packet.

Error

Warning

Description

A notification sent when a non-virtual interface receives an OSPFv3 packet that cannot be parsed.

【System impact】

Status control

CLI: Use the snmp-agent trap enable ospfv3 if-bad-pkt command.

OFF

CLI: Use the undo snmp-agent trap enable ospfv3 if-bad-pkt command.

Object

OID (object name)	Description	Index	Type	Value range
1.3.6.1.2.1.191.1.1.1 (ospfv3RouterId)	Unique identifier of a router in an AS.	No	Ospfv3RouterIdTC	Unsigned32 (1..'FFFFFFFF'h)
1.3.6.1.2.1.191.1.7.1.12 (ospfv3IfState)	Interface state.	No	INTEGER	down(1), loopback(2), waiting(3), pointToPoint(4), designatedRouter(5), backupDesignatedRouter(6), otherDesignatedRouter(7), standby(8)
1.3.6.1.2.1.191.1.14.3 (ospfv3PacketSrc)	IPv6 packet that cannot be identified by the neighbor.	No	InetAddressIPv6	OCTET STRING (16)
1.3.6.1.2.1.191.1.14.2 (ospfv3PacketType)	OSPFv3 data packet type.	No	INTEGER	hello(1), dbDescript(2), lsReq(3), lsUpdate(4), lsAck(5), nullPacket(6)

Recommended action

Verify that the parameters configured on the interface are consistent with parameters in the hello packets.

ospfv3VirtIfRxBadPacket

Basic information

OID	Event	Type	Severity	Recovery notification	Default status
1.3.6.1.2.1.191.0.7	A virtual interface receives an error packet.	Informational	Warning	-	ON

Notification triggers

Notification Triggers

System impact

OID

Event

Type

Severity

Recovery notification

Default status

1.3.6.1.2.1.191.0.7

A virtual interface receives an error packet.

Informational

Warning

Description

A notification sent when a virtual interface receives an OSPFv3 packet that cannot be parsed.

【System impact】

Status control

CLI: Use the snmp-agent trap enable ospfv3 virtif-bad-pkt command.

OFF

CLI: Use the undo snmp-agent trap enable ospfv3 virtif-bad-pkt command.

Object

OID (object name)	Description	Index	Type	Value range
1.3.6.1.2.1.191.1.1.1 (ospfv3RouterId)	Unique identifier of a router in an AS.	No	Ospfv3RouterIdTC	Unsigned32 (1..'FFFFFFFF'h)
1.3.6.1.2.1.191.1.8.1.9 (ospfv3VirtIfState)	Virtual interface state.	No	INTEGER	down(1), pointToPoint(4)
1.3.6.1.2.1.191.1.14.2 (ospfv3PacketType)	OSPFv3 data packet type.	No	INTEGER	hello(1), dbDescript(2), lsReq(3), lsUpdate(4), lsAck(5), nullPacket(6)

Recommended action

No action is required.

ospfv3IfStateChange

Basic information

OID	Event	Type	Severity	Recovery notification	Default status
1.3.6.1.2.1.191.0.10	Interface state changes.	Error	Warning	-	ON

Notification triggers

Notification Triggers

System impact

OID

Event

Type

Severity

Recovery notification

Default status

1.3.6.1.2.1.191.0.10

Interface state changes.

Error

Warning

Description

A notification sent when the state of a non-virtual interface changes from DR to Down or changes to the Point-to-Point, DR, BDR, or Drother state.

【System impact】

Status control

CLI: Use the snmp-agent trap enable ospfv3 if-state-change command.

OFF

CLI: Use the undo snmp-agent trap enable ospfv3 if-state-change command.

Object

OID (object name)

Description

Index

Type

Value range

1.3.6.1.2.1.191.1.1.1

(ospfv3RouterId)

Unique identifier of a router in an AS.

Ospfv3RouterIdTC

Unsigned32 (1..'FFFFFFFF'h)

1.3.6.1.2.1.191.1.7.1.12 (ospfv3IfState)

Interface state.

INTEGER

down(1), loopback(2), waiting(3), pointToPoint(4), designatedRouter(5), backupDesignatedRouter(6), otherDesignatedRouter(7), standby(8)

Recommended action

No action is required.

ospfv3NssaTranslatorStatusChange

Basic information

OID	Event	Type	Severity	Recovery notification	Default status
1.3.6.1.2.1.191.0.11	A router's ability to translate type-7 LSAs into type-5 LSAs changes.	Error	Warning	-	ON

Notification triggers

Notification Triggers

System impact

OID

Event

Type

Severity

Recovery notification

Default status

1.3.6.1.2.1.191.0.11

A router's ability to translate type-7 LSAs into type-5 LSAs changes.

Error

Warning

Description

A notification sent when a router's ability to translate type-7 LSAs into type-5 LSAs changes.

【System impact】

Status control

CLI: Use the snmp-agent trap enable ospfv3 nssatranslator-status-change command.

OFF

CLI: Use the undo snmp-agent trap enable ospfv3 nssatranslator-status-change command.

Object

OID (object name)

Description

Index

Type

Value range

1.3.6.1.2.1.191.1.1.1

(ospfv3RouterId)

Unique identifier of a router in an AS.

Ospfv3RouterIdTC

Unsigned32 (1..'FFFFFFFF'h)

1.3.6.1.2.1.191.1.2.1.12 (ospfv3AreaNssaTranslatorState)

Method for the NSSA ABR to become capable of translating Type-7 LSAs into Type-5 LSAs.

INTEGER

enabled(1), elected(2), disabled(3)

Recommended action

No action is required.

ospfv3RestartStatusChange

Basic information

OID	Event	Type	Severity	Recovery notification	Default status
1.3.6.1.2.1.191.0.12	GR restarter state changes.	Error	Warning	-	ON

Notification triggers

Notification Triggers

System impact

OID

Event

Type

Severity

Recovery notification

Default status

1.3.6.1.2.1.191.0.12

GR restarter state changes.

Error

Warning

Description

A notification sent when the GR restarter state changes.

【System impact】

Status control

CLI: Use the snmp-agent trap enable ospfv3 grrestarter-status-change command.

OFF

CLI: Use the undo snmp-agent trap enable ospfv3 grrestarter-status-change command.

Object

OID (object name)	Description	Index	Type	Value range
1.3.6.1.2.1.191.1.1.1 (ospfv3RouterId)	Unique identifier of a router in an AS.	No	Ospfv3RouterIdTC	Unsigned32 (1..'FFFFFFFF'h)
1.3.6.1.2.1.191.1.1.18 (ospfv3RestartStatus)	GR restarter state.	No	INTEGER	notRestarting(1), plannedRestart(2), unplannedRestart(3)
1.3.6.1.2.1.191.1.1.16 (ospfv3RestartInterval)	GR timeout interval.	No	Ospfv3UpToRefreshIntervalTC	Unsigned32 (40..1800)
1.3.6.1.2.1.191.1.1.20 (ospfv3RestartExitReason)	Reason why the device exited GR restarter state.	No	INTEGER	none(1), inProgress(2), completed(3), timedOut(4), topologyChanged(5)

Recommended action

No action is required.

ospfv3NbrRestartHelperStatusChange

Basic information

OID	Event	Type	Severity	Recovery notification	Default status
1.3.6.1.2.1.191.0.13	The GR helper state of a neighbor changes.	Error	Warning	-	ON

Notification triggers

Notification Triggers

System impact

OID

Event

Type

Severity

Recovery notification

Default status

1.3.6.1.2.1.191.0.13

The GR helper state of a neighbor changes.

Error

Warning

Description

A notification sent when a neighbor enters or exits GR helper state.

【System impact】

Status control

CLI: Use the snmp-agent trap enable ospfv3 grhelper-status-change command.

OFF

CLI: Use the undo snmp-agent trap enable ospfv3 grhelper-status-change command.

Object

OID (object name)	Description	Index	Type	Value range
1.3.6.1.2.1.191.1.1.1 (ospfv3RouterId)	Unique identifier of a router in an AS.	No	Ospfv3RouterIdTC	Unsigned32 (1..'FFFFFFFF'h)
1.3.6.1.2.1.191.1.9.1.13 (ospfv3NbrRestartHelperStatus)	GR helper state of the neighbor.	No	INTEGER	notHelping(1), helping(2)
1.3.6.1.2.1.191.1.9.1.14 (ospfv3NbrRestartHelperAge)	GR helper aging timer.	No	Ospfv3UpToRefreshIntervalTC	Unsigned32 (1..1800)
1.3.6.1.2.1.191.1.9.1.15 (ospfv3NbrRestartHelperExitReason)	Reason why the neighbor exited GR helper state.	No	INTEGER	none(1), inProgress(2), completed(3), timedOut(4), topologyChanged(5)

Recommended action

No action is required.

ospfv3VirtNbrRestartHelperStatusChange

Basic information

OID	Event	Type	Severity	Recovery notification	Default status
1.3.6.1.2.1.191.0.14	The GR helper state of a virtual neighbor changes.	Error	Warning	-	ON

Notification triggers

Notification Triggers

System impact

OID

Event

Type

Severity

Recovery notification

Default status

1.3.6.1.2.1.191.0.14

The GR helper state of a virtual neighbor changes.

Error

Warning

Description

A notification sent when a virtual neighbor enters or exits GR helper state.

【System impact】

Status control

CLI: Use the snmp-agent trap enable ospfv3 virtgrhelper-status-change command.

OFF

CLI: Use the undo snmp-agent trap enable ospfv3 virtgrhelper-status-change command.

Object

OID (object name)	Description	Index	Type	Value range
1.3.6.1.2.1.191.1.1.1 (ospfv3RouterId)	Unique identifier of a router in an AS.	No	Ospfv3RouterIdTC	Unsigned32 (1..'FFFFFFFF'h)
1.3.6.1.2.1.191.1.11.1.13 (ospfv3VirtNbrRestartHelperStatus)	GR helper state of the virtual neighbor.	No	INTEGER	notHelping(1), helping(2)
1.3.6.1.2.1.191.1.11.1.14 (ospfv3VirtNbrRestartHelperAge)	Remaining time of the GR interval when the router is acting as a GR helper for the virtual neighbor.	No	Ospfv3UpToRefreshIntervalTC	Unsigned32 (1..1800)
1.3.6.1.2.1.191.1.11.1.15 (ospfv3VirtNbrRestartHelperExitReason)	Reason why the virtual neighbor exited GR helper state.	No	INTEGER	none(1), inProgress(2), completed(3), timedOut(4), topologyChanged(5)

Recommended action

No action is required.

06-Layer 3 - IP Routing

Basic information

Notification triggers

System impact

Status control

Object

Recommended action

Basic information

Notification triggers

System impact

Status control

Object

Recommended action

Basic information

Notification triggers

System impact

Status control

Object

Recommended action

Basic information

Notification triggers

System impact

Status control

Object

Recommended action

Basic information

Notification triggers

System impact

Status control

Object

Recommended action

Basic information

Notification triggers

System impact

Status control

Object

Recommended action

Basic information

Notification triggers

System impact

Status control

Object

Recommended action

Basic information

Notification triggers

System impact

Status control

Object

Recommended action

Basic information

Notification triggers

System impact

Status control

Object

Recommended action

Basic information

Notification triggers

System impact

Status control

Object

Recommended action

Basic information

Notification triggers

System impact

Status control

Object

Recommended action

Basic information

Notification triggers

System impact

Status control

Object

Recommended action

Intelligent Terminal Products

Product Support Services

Technical Service Solutions

Resource Center

Policy

Online Help

Become a Partner