Login
- Table of Contents
- Related Documents
-
| Title | Size | Download |
|---|---|---|
| 03-OSPF-TRAP-MIB | 284.60 KB |
Contents
ospfNssaTranslatorStatusChange
ospfNbrRestartHelperStatusChange
ospfVirtNbrRestartHelperStatusChange
OSPF-TRAP-MIB
About this MIB
Use this MIB to set, edit, and view OSPF protocol and notification information about network devices.
MIB file name
rfc4750-ospf-trap.mib
Notifications
ospfVirtIfStateChange
Basic information
|
OID |
Event |
Type |
Severity |
Recovery notification |
Default status |
|
1.3.6.1.2.1.14.16.2.1 |
Virtual interface state changes. |
Informational |
Warning |
- |
ON |
Notification triggers
Notification Triggers
System impact
OID
Event
Type
Severity
Recovery notification
Default status
1.3.6.1.2.1.14.16.2.1
Virtual interface state changes.
Informational
Warning
-
ON
Description
A notification sent when the state of a virtual interface regresses (for example, changing from P2P to Down) or progresses to a terminal state (for example, P2P).
【System impact】
Status control
ON
CLI: Use the snmp-agent trap enable ospf virtif-state-change command.
OFF
CLI: Use the undo snmp-agent trap enable ospf virtif-state-change command.
Object
|
OID (object name) |
Description |
Index |
Type |
Value range |
|
1.3.6.1.2.1.14.1.1 (ospfRouterId) |
Unique identifier of a router in an AS. |
No |
RouterID |
IpAddress |
|
1.3.6.1.2.1.14.9.1.1 (ospfVirtIfAreaId) |
ID of the area to which the virtual link belongs. |
No |
AreaID |
IpAddress |
|
1.3.6.1.2.1.14.9.1.2 (ospfVirtIfNeighbor) |
Router ID of the virtual neighbor. |
No |
RouterID |
IpAddress |
|
1.3.6.1.2.1.14.9.1.7 (ospfVirtIfState) |
Virtual interface state. |
No |
INTEGER |
down (1), pointToPoint (4) |
Recommended action
No action is required.
ospfNbrStateChange
Basic information
|
OID |
Event |
Type |
Severity |
Recovery notification |
Default status |
|
1.3.6.1.2.1.14.16.2.2 |
Neighbor state changes. |
Informational |
Warning |
- |
ON |
Notification triggers
Notification Triggers
System impact
OID
Event
Type
Severity
Recovery notification
Default status
1.3.6.1.2.1.14.16.2.2
Neighbor state changes.
Informational
Warning
-
ON
Description
A notification sent when the state of a neighbor regresses (for example, changing from Attempt or Full to 1-Way or Down) or progresses to a terminal state (for example, 2-Way or Full). When the state of a neighbor in an NBMA or broadcast network changes from Full to another state or changes from another state to Full, the notification is generated by the DR. An ospfIfStateChange notification will be generated when the DR does down.
【System impact】
Status control
ON
CLI: Use the snmp-agent trap enable ospf neighbor-state-change command.
OFF
CLI: Use the undo snmp-agent trap enable ospf neighbor-state-change command.
Object
|
OID (object name) |
Description |
Index |
Type |
Value range |
|
1.3.6.1.2.1.14.1.1 (ospfRouterId) |
Unique identifier of a router in an AS. |
No |
RouterID |
IpAddress |
|
1.3.6.1.2.1.14.10.1.1 (ospfNbrIpAddr) |
IP address of the neighbor. |
No |
IpAddress |
Standard MIB values. |
|
1.3.6.1.2.1.14.10.1.2 (ospfNbrAddressLessIndex) |
Set to 0 on an interface having an IP address, and set to the value of interface index in the Internet Standard MIB on an interface having no IP address. |
No |
InterfaceIndexOrZero |
Integer32 (0..2147483647) |
|
1.3.6.1.2.1.14.10.1.3 (ospfNbrRtrId) |
Router ID of the neighbor. |
No |
RouterID |
IpAddress |
|
1.3.6.1.2.1.14.10.1.6 (ospfNbrState) |
Neighbor state. |
No |
INTEGER |
down (1), attempt (2), init (3), twoWay (4), exchangeStart (5), exchange (6), loading (7), full (8) |
|
1.3.6.1.2.1.31.1.1.1.1 (ifName) |
Interface name |
No |
DisplayString |
OCTET STRING(0..255) |
Recommended action
No action is required.
ospfVirtNbrStateChange
Basic information
|
OID |
Event |
Type |
Severity |
Recovery notification |
Default status |
|
1.3.6.1.2.1.14.16.2.3 |
Virtual neighbor state changes. |
Informational |
Warning |
- |
ON |
Notification triggers
Notification Triggers
System impact
OID
Event
Type
Severity
Recovery notification
Default status
1.3.6.1.2.1.14.16.2.3
Virtual neighbor state changes.
Informational
Warning
-
ON
Description
A notification sent when the state of a virtual neighbor regresses (for example, changing from Attempt or Full to 1-Way or Down) or progresses to a terminal state (for example, Full).
【System impact】
Status control
ON
CLI: Use the snmp-agent trap enable ospf virtneighbor-state-change command.
OFF
CLI: Use the undo snmp-agent trap enable ospf virtneighbor-state-change command.
Object
|
OID (object name) |
Description |
Index |
Type |
Value range |
|
1.3.6.1.2.1.14.1.1 (ospfRouterId) |
Unique identifier of a router in an AS. |
No |
RouterID |
IpAddress |
|
1.3.6.1.2.1.14.11.1.1 (ospfVirtNbrArea) |
ID of the area to which the virtual neighbor belongs. |
No |
AreaID |
IpAddress |
|
1.3.6.1.2.1.14.11.1.2 (ospfVirtNbrRtrId) |
A 32-bit integer that uniquely identifies the neighboring router in the AS. |
No |
RouterID |
IpAddress |
|
1.3.6.1.2.1.14.11.1.5 (ospfVirtNbrState) |
Neighbor state. |
No |
INTEGER |
down (1), attempt (2), init (3), twoWay (4), exchangeStart (5), exchange (6), loading (7), full (8) |
Recommended action
No action is required.
ospfIfConfigError
Basic information
|
OID |
Event |
Type |
Severity |
Recovery notification |
Default status |
|
1.3.6.1.2.1.14.16.2.4 |
Interface configuration error. |
Error |
Warning |
- |
ON |
Notification triggers
Notification Triggers
System impact
OID
Event
Type
Severity
Recovery notification
Default status
1.3.6.1.2.1.14.16.2.4
Interface configuration error.
Error
Warning
-
ON
Description
A notification sent when an interface on a router receives a packet from another router with mismatched configuration. The optionMismatch event causes a notification only if it prevents an adjacency from establishing.
【System impact】
Status control
ON
CLI: Use the snmp-agent trap enable ospf config-error command.
OFF
CLI: Use the undo snmp-agent trap enable ospf config-error command.
Object
|
OID (object name) |
Description |
Index |
Type |
Value range |
|
1.3.6.1.2.1.14.1.1 (ospfRouterId) |
Unique identifier of a router in an AS. |
No |
RouterID |
IpAddress |
|
1.3.6.1.2.1.14.7.1.1 (ospfIfIpAddress) |
IP address of the interface. |
No |
IpAddress |
Standard MIB values. |
|
1.3.6.1.2.1.14.7.1.2 (ospfAddressLessIf) |
Used to distinguish interface instances with addresses configured and those without addresses configured. |
No |
InterfaceIndexOrZero |
Integer32 (0..2147483647) |
|
1.3.6.1.2.1.14.16.1.4 (ospfPacketSrc) |
IP address that cannot be identified by a neighbor. |
No |
IpAddress |
Standard MIB values. |
|
1.3.6.1.2.1.14.16.1.2 (ospfConfigErrorType) |
Configuration error type. |
No |
INTEGER |
badVersion (1), areaMismatch (2), unknownNbmaNbr (3), unknownVirtualNbr (4), authTypeMismatch(5), authFailure (6), netMaskMismatch (7), helloIntervalMismatch (8), deadIntervalMismatch (9), optionMismatch (10), mtuMismatch (11), duplicateRouterId (12), noError (13) |
|
1.3.6.1.2.1.14.16.1.3 (ospfPacketType) |
OSPF packet type. |
No |
INTEGER |
hello (1), dbDescript (2), lsReq (3), lsUpdate (4), lsAck (5), nullPacket (6) |
Recommended action
To resolve this issue:
1.Verify that the interface configuration is correct.
2.If the issue persists, contact H3C Support.
ospfVirtIfConfigError
Basic information
|
OID |
Event |
Type |
Severity |
Recovery notification |
Default status |
|
1.3.6.1.2.1.14.16.2.5 |
Virtual interface configuration error. |
Error |
Warning |
- |
ON |
Notification triggers
Notification Triggers
System impact
OID
Event
Type
Severity
Recovery notification
Default status
1.3.6.1.2.1.14.16.2.5
Virtual interface configuration error.
Error
Warning
-
ON
Description
A notification sent when an OSPF virtual interface on a router receives a packet from another router with mismatched configuration. The optionMismatch event causes a notification only if it prevents establishment of an adjacency.
【System impact】
Status control
ON
CLI: Use the snmp-agent trap enable ospf virt-config-error command.
OFF
CLI: Use the undo snmp-agent trap enable ospf virt-config-error command.
Object
|
OID (object name) |
Description |
Index |
Type |
Value range |
|
1.3.6.1.2.1.14.1.1 (ospfRouterId) |
Unique identifier of a router in an AS. |
No |
RouterID |
IpAddress |
|
1.3.6.1.2.1.14.9.1.1 (ospfVirtIfAreaId) |
ID of the area to which the virtual link belongs. |
No |
AreaID |
IpAddress |
|
1.3.6.1.2.1.14.9.1.2 (ospfVirtIfNeighbor) |
Router ID of the virtual neighbor. |
No |
RouterID |
IpAddress |
|
1.3.6.1.2.1.14.16.1.2 (ospfConfigErrorType) |
Configuration error type. |
No |
INTEGER |
badVersion (1), areaMismatch (2), unknownNbmaNbr (3), unknownVirtualNbr (4), authTypeMismatch(5), authFailure (6), netMaskMismatch (7), helloIntervalMismatch (8), deadIntervalMismatch (9), optionMismatch (10), mtuMismatch (11), duplicateRouterId (12), noError (13) |
|
1.3.6.1.2.1.14.16.1.3 (ospfPacketType) |
OSPF packet type. |
No |
INTEGER |
hello (1), dbDescript (2), lsReq (3), lsUpdate (4), lsAck (5), nullPacket (6) |
Recommended action
To resolve this issue:
1.Verify that the virtual interface configuration is correct.
2.If the issue persists, contact H3C Support.
ospfIfAuthFailure
Basic information
|
OID |
Event |
Type |
Severity |
Recovery notification |
Default status |
|
1.3.6.1.2.1.14.16.2.6 |
Interface authentication failure. |
Error |
Warning |
- |
ON |
Notification triggers
Notification Triggers
System impact
OID
Event
Type
Severity
Recovery notification
Default status
1.3.6.1.2.1.14.16.2.6
Interface authentication failure.
Error
Warning
-
ON
Description
A notification sent when an interface on a router receives a packet from another router with mismatched authentication key or authentication type.
【System impact】
Status control
ON
CLI: Use the snmp-agent trap enable ospf authentication-failure command.
OFF
CLI: Use the undo snmp-agent trap enable ospf authentication-failure command.
Object
|
OID (object name) |
Description |
Index |
Type |
Value range |
|
1.3.6.1.2.1.14.1.1 (ospfRouterId) |
Unique identifier of a router in an AS. |
No |
RouterID |
IpAddress |
|
1.3.6.1.2.1.14.7.1.1 (ospfIfIpAddress) |
IP address of the interface. |
No |
IpAddress |
Standard MIB values. |
|
1.3.6.1.2.1.14.7.1.2 (ospfAddressLessIf) |
Used to distinguish interface instances with addresses configured and those without addresses configured. |
No |
InterfaceIndexOrZero |
Integer32 (0..2147483647) |
|
1.3.6.1.2.1.14.16.1.4 (ospfPacketSrc) |
IP address that cannot be identified by a neighbor instance. |
No |
IpAddress |
Standard MIB values. |
|
1.3.6.1.2.1.14.16.1.2 (ospfConfigErrorType) |
Configuration error type. |
No |
INTEGER |
badVersion (1), areaMismatch (2), unknownNbmaNbr (3), unknownVirtualNbr (4), authTypeMismatch(5), authFailure (6), netMaskMismatch (7), helloIntervalMismatch (8), deadIntervalMismatch (9), optionMismatch (10), mtuMismatch (11), duplicateRouterId (12), noError (13) |
|
1.3.6.1.2.1.14.16.1.3 (ospfPacketType) |
OSPF packet type. |
No |
INTEGER |
hello (1), dbDescript (2), lsReq (3), lsUpdate (4), lsAck (5), nullPacket (6) |
Recommended action
To resolve this issue:
1.Verify that the interface authentication settings are correct.
2.If the issue persists, contact H3C Support.
ospfVirtIfAuthFailure
Basic information
|
OID |
Event |
Type |
Severity |
Recovery notification |
Default status |
|
1.3.6.1.2.1.14.16.2.7 |
Virtual interface authentication failure. |
Error |
Warning |
- |
ON |
Notification triggers
Notification Triggers
System impact
OID
Event
Type
Severity
Recovery notification
Default status
1.3.6.1.2.1.14.16.2.7
Virtual interface authentication failure.
Error
Warning
-
ON
Description
A notification sent when an OSPF virtual interface on a router receives a packet from another router with mismatched authentication key or authentication type.
【System impact】
Status control
ON
CLI: Use the snmp-agent trap enable ospf virt-authentication-failure command.
OFF
CLI: Use the undo snmp-agent trap enable ospf virt-authentication-failure command.
Object
|
OID (object name) |
Description |
Index |
Type |
Value range |
|
1.3.6.1.2.1.14.1.1 (ospfRouterId) |
Unique identifier of a router in an AS. |
No |
RouterID |
IpAddress |
|
1.3.6.1.2.1.14.9.1.1 (ospfVirtIfAreaId) |
ID of the area to which the virtual link belongs. |
No |
AreaID |
IpAddress |
|
1.3.6.1.2.1.14.9.1.2 (ospfVirtIfNeighbor) |
Router ID of the virtual neighbor. |
No |
RouterID |
IpAddress |
|
1.3.6.1.2.1.14.16.1.2 (ospfConfigErrorType) |
Configuration error type. |
No |
INTEGER |
badVersion (1), areaMismatch (2), unknownNbmaNbr (3), unknownVirtualNbr (4), authTypeMismatch(5), authFailure (6), netMaskMismatch (7), helloIntervalMismatch (8), deadIntervalMismatch (9), optionMismatch (10), mtuMismatch (11), duplicateRouterId (12), noError (13) |
|
1.3.6.1.2.1.14.16.1.3 (ospfPacketType) |
OSPF packet type. |
No |
INTEGER |
hello (1), dbDescript (2), lsReq (3), lsUpdate (4), lsAck (5), nullPacket (6) |
Recommended action
To resolve this issue:
1.Verify that the virtual interface authentication settings are correct.
2.If the issue persists, contact H3C Support.
ospfIfRxBadPacket
Basic information
|
OID |
Event |
Type |
Severity |
Recovery notification |
Default status |
|
1.3.6.1.2.1.14.16.2.8 |
An interface receives an error packet. |
Informational |
Warning |
- |
ON |
Notification triggers
Notification Triggers
System impact
OID
Event
Type
Severity
Recovery notification
Default status
1.3.6.1.2.1.14.16.2.8
An interface receives an error packet.
Informational
Warning
-
ON
Description
A notification sent when an interface receives an OSPF packet that cannot be parsed.
【System impact】
Status control
ON
CLI: Use the snmp-agent trap enable ospf bad-packet command.
OFF
CLI: Use the undo snmp-agent trap enable ospf bad-packet command.
Object
|
OID (object name) |
Description |
Index |
Type |
Value range |
|
1.3.6.1.2.1.14.1.1 (ospfRouterId) |
Unique identifier of a router in an AS. |
No |
RouterID |
IpAddress |
|
1.3.6.1.2.1.14.7.1.1 (ospfIfIpAddress) |
IP address of the interface. |
No |
IpAddress |
Standard MIB values. |
|
1.3.6.1.2.1.14.7.1.2 (ospfAddressLessIf) |
Used to distinguish interface instances with addresses configured and those without addresses configured. |
No |
InterfaceIndexOrZero |
Integer32 (0..2147483647) |
|
1.3.6.1.2.1.14.16.1.4 (ospfPacketSrc) |
IP address that cannot be identified by a neighbor. |
No |
IpAddress |
Standard MIB values. |
|
1.3.6.1.2.1.14.16.1.3 (ospfPacketType) |
OSPF packet type. |
No |
INTEGER |
hello (1), dbDescript (2), lsReq (3), lsUpdate (4), lsAck (5), nullPacket (6) |
Recommended action
No action is required.
ospfVirtIfRxBadPacket
Basic information
|
OID |
Event |
Type |
Severity |
Recovery notification |
Default status |
|
1.3.6.1.2.1.14.16.2.9 |
A virtual interface receives an error packet. |
Informational |
Warning |
- |
ON |
Notification triggers
Notification Triggers
System impact
OID
Event
Type
Severity
Recovery notification
Default status
1.3.6.1.2.1.14.16.2.9
A virtual interface receives an error packet.
Informational
Warning
-
ON
Description
A notification sent when a virtual interface receives an OSPF packet that cannot be parsed.
【System impact】
Status control
ON
CLI: Use the snmp-agent trap enable ospf virt-bad-packet command.
OFF
CLI: Use the undo snmp-agent trap enable ospf virt-bad-packet command.
Object
|
OID (object name) |
Description |
Index |
Type |
Value range |
|
1.3.6.1.2.1.14.1.1 (ospfRouterId) |
Unique identifier of a router in an AS. |
No |
RouterID |
IpAddress |
|
1.3.6.1.2.1.14.9.1.1 (ospfVirtIfAreaId) |
ID of the area to which the virtual link belongs. |
No |
AreaID |
IpAddress |
|
1.3.6.1.2.1.14.9.1.2 (ospfVirtIfNeighbor) |
Router ID of the virtual neighbor. |
No |
RouterID |
IpAddress |
|
1.3.6.1.2.1.14.16.1.3 (ospfPacketType) |
OSPF packet type. |
No |
INTEGER |
hello (1), dbDescript (2), lsReq (3), lsUpdate (4), lsAck (5), nullPacket (6) |
Recommended action
No action is required.
ospfTxRetransmit
Basic information
|
OID |
Event |
Type |
Severity |
Recovery notification |
Default status |
|
1.3.6.1.2.1.14.16.2.10 |
An interface retransmits an OSPF packet. |
Informational |
Warning |
- |
ON |
Notification triggers
Notification Triggers
System impact
OID
Event
Type
Severity
Recovery notification
Default status
1.3.6.1.2.1.14.16.2.10
An interface retransmits an OSPF packet.
Informational
Warning
-
ON
Description
A notification sent when an interface retransmits an OSPF packet. All packets that might be retransmitted are associated with an LSDB entry, which is identified by the LS type, LS ID, and Router ID.
【System impact】
Status control
ON
CLI: Use the snmp-agent trap enable ospf retransmit command.
OFF
CLI: Use the undo snmp-agent trap enable ospf retransmit command.
Object
|
OID (object name) |
Description |
Index |
Type |
Value range |
|
1.3.6.1.2.1.14.1.1 (ospfRouterId) |
Unique identifier of a router in an AS. |
No |
RouterID |
IpAddress |
|
1.3.6.1.2.1.14.7.1.1 (ospfIfIpAddress) |
IP address of the interface. |
No |
IpAddress |
Standard MIB values. |
|
1.3.6.1.2.1.14.7.1.2 (ospfAddressLessIf) |
Used to distinguish interface instances with addresses configured and those without addresses configured. |
No |
InterfaceIndexOrZero |
Integer32 (0..2147483647) |
|
1.3.6.1.2.1.14.10.1.3 (ospfNbrRtrId) |
Router ID of the neighbor. |
No |
RouterID |
IpAddress |
|
1.3.6.1.2.1.14.16.1.3 (ospfPacketType) |
OSPF packet type. |
No |
INTEGER |
hello (1), dbDescript (2), lsReq (3), lsUpdate (4), lsAck (5), nullPacket (6) |
|
1.3.6.1.2.1.14.4.1.2 (ospfLsdbType) |
LSA type. Type-5 LSAs are not displayed. |
No |
INTEGER |
routerLink (1), networkLink (2), summaryLink (3), asSummaryLink (4), asExternalLink (5), multicastLink (6), nssaExternalLink (7), areaOpaqueLink (10) |
|
1.3.6.1.2.1.14.4.1.3 (ospfLsdbLsid) |
LS ID. |
No |
IpAddress |
Standard MIB values. |
|
1.3.6.1.2.1.14.4.1.4 (ospfLsdbRouterId) |
Router ID of the device that generates the LSA. |
No |
RouterID |
IpAddress |
Recommended action
No action is required.
ospfVirtIfTxRetransmit
Basic information
|
OID |
Event |
Type |
Severity |
Recovery notification |
Default status |
|
1.3.6.1.2.1.14.16.2.11 |
A virtual interface retransmits an OSPF packet. |
Informational |
Warning |
- |
ON |
Notification triggers
Notification Triggers
System impact
OID
Event
Type
Severity
Recovery notification
Default status
1.3.6.1.2.1.14.16.2.11
A virtual interface retransmits an OSPF packet.
Informational
Warning
-
ON
Description
A notification sent when a virtual interface retransmits an OSPF packet. All packets that might be retransmitted are associated with an LSDB entry, which is identified by the LS type, LS ID, and Router ID.
【System impact】
Status control
ON
CLI: Use the snmp-agent trap enable ospf virt-retransmit command.
OFF
CLI: Use the undo snmp-agent trap enable ospf virt-retransmit command.
Object
|
OID (object name) |
Description |
Index |
Type |
Value range |
|
1.3.6.1.2.1.14.1.1 (ospfRouterId) |
Unique identifier of a router in an AS. |
No |
RouterID |
IpAddress |
|
1.3.6.1.2.1.14.9.1.1 (ospfVirtIfAreaId) |
ID of the area to which the virtual link belongs. |
No |
AreaID |
IpAddress |
|
1.3.6.1.2.1.14.9.1.2 (ospfVirtIfNeighbor) |
Router ID of the virtual neighbor. |
No |
RouterID |
IpAddress |
|
1.3.6.1.2.1.14.16.1.3 (ospfPacketType) |
OSPF packet type. |
No |
INTEGER |
hello (1), dbDescript (2), lsReq (3), lsUpdate (4), lsAck (5), nullPacket (6) |
|
1.3.6.1.2.1.14.4.1.2 (ospfLsdbType) |
LSA type. Type-5 LSAs are not displayed. |
No |
INTEGER |
routerLink (1), networkLink (2), summaryLink (3), asSummaryLink (4), asExternalLink (5), multicastLink (6), nssaExternalLink (7), areaOpaqueLink (10) |
|
1.3.6.1.2.1.14.4.1.3 (ospfLsdbLsid) |
LS ID |
No |
IpAddress |
Standard MIB values. |
|
1.3.6.1.2.1.14.4.1.4 (ospfLsdbRouterId) |
Router ID of the device that generates the LSA. |
No |
RouterID |
IpAddress |
Recommended action
No action is required.
ospfOriginateLsa
Basic information
|
OID |
Event |
Type |
Severity |
Recovery notification |
Default status |
|
1.3.6.1.2.1.14.16.2.12 |
The local device generates a new LSA. |
Informational |
Warning |
- |
ON |
Notification triggers
Notification Triggers
System impact
OID
Event
Type
Severity
Recovery notification
Default status
1.3.6.1.2.1.14.16.2.12
The local device generates a new LSA.
Informational
Warning
-
ON
Description
A notification sent when the local device generates a new LSA. This notification is generated only when an LSA is originated because of a topology change. Flushing of aged LSAs and refreshes of LSAs will not trigger this notification.
【System impact】
Status control
ON
CLI: Use the snmp-agent trap enable ospf lsa-originate command.
OFF
CLI: Use the undo snmp-agent trap enable ospf lsa-originate command.
Object
|
OID (object name) |
Description |
Index |
Type |
Value range |
|
1.3.6.1.2.1.14.1.1 (ospfRouterId) |
Unique identifier of a router in an AS. |
No |
RouterID |
IpAddress |
|
1.3.6.1.2.1.14.4.1.1 (ospfLsdbAreaId) |
ID of the area from which the LSA was received. |
No |
AreaID |
IpAddress |
|
1.3.6.1.2.1.14.4.1.2 (ospfLsdbType) |
LSA type. Type-5 LSAs are not displayed. |
No |
INTEGER |
routerLink (1), networkLink (2), summaryLink (3), asSummaryLink (4), asExternalLink (5), multicastLink (6), nssaExternalLink (7), areaOpaqueLink (10) |
|
1.3.6.1.2.1.14.4.1.3 (ospfLsdbLsid) |
LS ID. |
No |
IpAddress |
Standard MIB values. |
|
1.3.6.1.2.1.14.4.1.4 (ospfLsdbRouterId) |
Router ID of the device that generates the LSA. |
No |
RouterID |
IpAddress |
Recommended action
No action is required.
ospfMaxAgeLsa
Basic information
|
OID |
Event |
Type |
Severity |
Recovery notification |
Default status |
|
1.3.6.1.2.1.14.16.2.13 |
An LSA in the LSDB ages. |
Informational |
Warning |
- |
ON |
Notification triggers
Notification Triggers
System impact
OID
Event
Type
Severity
Recovery notification
Default status
1.3.6.1.2.1.14.16.2.13
An LSA in the LSDB ages.
Informational
Warning
-
ON
Description
A notification sent when an LSA in the LSDB ages.
【System impact】
Status control
ON
CLI: Use the snmp-agent trap enable ospf lsa-maxage command.
OFF
CLI: Use the undo snmp-agent trap enable ospf lsa-maxage command.
Object
|
OID (object name) |
Description |
Index |
Type |
Value range |
|
1.3.6.1.2.1.14.1.1 (ospfRouterId) |
Unique identifier of a router in an AS. |
No |
RouterID |
IpAddress |
|
1.3.6.1.2.1.14.4.1.1 (ospfLsdbAreaId) |
ID of the area from which the LSA was received. |
No |
AreaID |
IpAddress |
|
1.3.6.1.2.1.14.4.1.2 (ospfLsdbType) |
LSA type. Type-5 LSAs are not displayed. |
No |
INTEGER |
routerLink (1), networkLink (2), summaryLink (3), asSummaryLink (4), asExternalLink (5), multicastLink (6), nssaExternalLink (7), areaOpaqueLink (10) |
|
1.3.6.1.2.1.14.4.1.3 (ospfLsdbLsid) |
LS ID. |
No |
IpAddress |
Standard MIB values. |
|
1.3.6.1.2.1.14.4.1.4 (ospfLsdbRouterId) |
Router ID of the device that generates the LSA. |
No |
RouterID |
IpAddress |
Recommended action
No action is required.
ospfLsdbOverflow
Basic information
|
OID |
Event |
Type |
Severity |
Recovery notification |
Default status |
|
1.3.6.1.2.1.14.16.2.14 |
The number of LSAs in the LSDB of a device exceeds the upper limit. |
Error |
Warning |
- |
ON |
Notification triggers
Notification Triggers
System impact
OID
Event
Type
Severity
Recovery notification
Default status
1.3.6.1.2.1.14.16.2.14
The number of LSAs in the LSDB of a device exceeds the upper limit.
Error
Warning
-
ON
Description
A notification sent when the number of LSAs in the LSDB of a device exceeds the upper limit.
【System impact】
Status control
ON
CLI: Use the snmp-agent trap enable ospf lsdb-overflow command.
OFF
CLI: Use the undo snmp-agent trap enable ospf lsdb-overflow command.
Object
|
OID (object name) |
Description |
Index |
Type |
Value range |
|
1.3.6.1.2.1.14.1.1 (ospfRouterId) |
Unique identifier of a router in an AS. |
No |
RouterID |
IpAddress |
|
1.3.6.1.2.1.14.1.11 (ospfExtLsdbLimit) |
Maximum number of non-default ASEs in the LSDB. A value of -1 indicates no limit. |
No |
Integer32 |
-1..'7FFFFFFF'h |
Recommended action
To resolve this issue:
1.Reduce the number of LSAs.
2.If the issue persists, contact H3C Support.
ospfLsdbApproachingOverflow
Basic information
|
OID |
Event |
Type |
Severity |
Recovery notification |
Default status |
|
1.3.6.1.2.1.14.16.2.15 |
The number of LSAs in the LSDB of a device reaches 90% the upper limit. |
Error |
Warning |
- |
ON |
Notification triggers
Notification Triggers
System impact
OID
Event
Type
Severity
Recovery notification
Default status
1.3.6.1.2.1.14.16.2.15
The number of LSAs in the LSDB of a device reaches 90% the upper limit.
Error
Warning
-
ON
Description
A notification sent when the number of LSAs in the LSDB of a device reaches 90% the upper limit.
【System impact】
Status control
ON
CLI: Use the snmp-agent trap enable ospf lsdb-approaching-overflow command.
OFF
CLI: Use the undo snmp-agent trap enable ospf lsdb-approaching-overflow command.
Object
|
OID (object name) |
Description |
Index |
Type |
Value range |
|
1.3.6.1.2.1.14.1.1 (ospfRouterId) |
Unique identifier of a router in an AS. |
No |
RouterID |
IpAddress |
|
1.3.6.1.2.1.14.1.11 (ospfExtLsdbLimit) |
Maximum number of non-default ASEs in the LSDB. A value of -1 indicates no limit. |
No |
Integer32 |
-1..'7FFFFFFF'h |
Recommended action
To resolve this issue:
1.Reduce the number of LSAs.
2.If the issue persists, contact H3C Support.
ospfIfStateChange
Basic information
|
OID |
Event |
Type |
Severity |
Recovery notification |
Default status |
|
1.3.6.1.2.1.14.16.2.16 |
Interface state changes. |
Informational |
Warning |
- |
ON |
Notification triggers
Notification Triggers
System impact
OID
Event
Type
Severity
Recovery notification
Default status
1.3.6.1.2.1.14.16.2.16
Interface state changes.
Informational
Warning
-
ON
Description
A notification sent when the state of an OSPF interface regresses (for example, changing from Dr to Down) or progresses to a terminal state (for example, Point-to-Point, DR Other, Dr, or Backup).
【System impact】
Status control
ON
CLI: Use the snmp-agent trap enable ospf if-state-change command.
OFF
CLI: Use the undo snmp-agent trap enable ospf if-state-change command.
Object
|
OID (object name) |
Description |
Index |
Type |
Value range |
|
1.3.6.1.2.1.14.1.1 (ospfRouterId) |
Unique identifier of a router in an AS. |
No |
RouterID |
IpAddress |
|
1.3.6.1.2.1.14.7.1.1 (ospfIfIpAddress) |
IP address of the interface. |
No |
IpAddress |
Standard MIB values. |
|
1.3.6.1.2.1.14.7.1.2 (ospfAddressLessIf) |
Used to distinguish interface instances with addresses configured and those without addresses configured. |
No |
InterfaceIndexOrZero |
Integer32 (0..2147483647) |
|
1.3.6.1.2.1.14.7.1.12 (ospfIfState) |
Interface state. |
No |
INTEGER |
down (1), loopback (2), waiting (3), pointToPoint (4), designatedRouter (5), backupDesignatedRouter (6), otherDesignatedRouter (7) |
Recommended action
No action is required.
ospfNssaTranslatorStatusChange
Basic information
|
OID |
Event |
Type |
Severity |
Recovery notification |
Default status |
|
1.3.6.1.2.1.14.16.2.17 |
A router's ability to translate OSPF type-7 LSAs into OSPF type-5 LSAs changes. |
Informational |
Warning |
- |
ON |
Notification triggers
Notification Triggers
System impact
OID
Event
Type
Severity
Recovery notification
Default status
1.3.6.1.2.1.14.16.2.17
A router's ability to translate OSPF type-7 LSAs into OSPF type-5 LSAs changes.
Informational
Warning
-
ON
Description
A notification sent when a router's ability to translate OSPF type-7 LSAs into OSPF type-5 LSAs changes.
【System impact】
Status control
ON
CLI: Use the snmp-agent trap enable ospf nssatranslator-status-change command.
OFF
CLI: Use the undo snmp-agent trap enable ospf nssatranslator-status-change command.
Object
|
OID (object name) |
Description |
Index |
Type |
Value range |
|
1.3.6.1.2.1.14.1.1 (ospfRouterId) |
Unique identifier of a router in an AS. |
No |
RouterID |
IpAddress |
|
1.3.6.1.2.1.14.2.1.1 (ospfAreaId) |
Area ID, a 32-bit integer that uniquely identifies an area. |
No |
AreaID |
IpAddress |
|
1.3.6.1.2.1.14.2.1.12 (ospfAreaNssaTranslatorState) |
Method for the NSSA ABR to become capable of translating Type-7 LSAs into Type-5 LSAs. |
No |
INTEGER |
enabled (1), elected (2), disabled (3) |
Recommended action
No action is required.
ospfRestartStatusChange
Basic information
|
OID |
Event |
Type |
Severity |
Recovery notification |
Default status |
|
1.3.6.1.2.1.14.16.2.18 |
GR restarter state changes. |
Informational |
Warning |
- |
ON |
Notification triggers
Notification Triggers
System impact
OID
Event
Type
Severity
Recovery notification
Default status
1.3.6.1.2.1.14.16.2.18
GR restarter state changes.
Informational
Warning
-
ON
Description
A notification sent when the state of the GR restarter changes.
【System impact】
Status control
ON
CLI: Use the snmp-agent trap enable ospf grrestarter-status-change command.
OFF
CLI: Use the undo snmp-agent trap enable ospf grrestarter-status-change command.
Object
|
OID (object name) |
Description |
Index |
Type |
Value range |
|
1.3.6.1.2.1.14.1.1 (ospfRouterId) |
Unique identifier of a router in an AS. |
No |
RouterID |
IpAddress |
|
1.3.6.1.2.1.14.1.21 (ospfRestartStatus) |
GR restarter state. |
No |
INTEGER |
notRestarting (1), plannedRestart (2), unplannedRestart (3) |
|
1.3.6.1.2.1.14.1.19 (ospfRestartInterval) |
Graceful restart timeout interval. |
No |
Integer32 |
1..1800 |
|
1.3.6.1.2.1.14.1.23 (ospfRestartExitReason) |
Reason why the GR restarter exited. |
No |
INTEGER |
none (1), inProgress (2), completed (3), timedOut (4), topologyChanged (5) |
Recommended action
No action is required.
ospfNbrRestartHelperStatusChange
Basic information
|
OID |
Event |
Type |
Severity |
Recovery notification |
Default status |
|
1.3.6.1.2.1.14.16.2.19 |
GR helper state changes. |
Informational |
Warning |
- |
ON |
Notification triggers
Notification Triggers
System impact
OID
Event
Type
Severity
Recovery notification
Default status
1.3.6.1.2.1.14.16.2.19
GR helper state changes.
Informational
Warning
-
ON
Description
A notification sent when the GR helper state of a neighbor changes.
【System impact】
Status control
ON
CLI: Use the snmp-agent trap enable ospf grhelper-status-change command.
OFF
CLI: Use the undo snmp-agent trap enable ospf grhelper-status-change command.
Object
|
OID (object name) |
Description |
Index |
Type |
Value range |
|
1.3.6.1.2.1.14.1.1 (ospfRouterId) |
Unique identifier of a router in an AS. |
No |
RouterID |
IpAddress |
|
1.3.6.1.2.1.14.10.1.1 (ospfNbrIpAddr) |
IP address of the neighbor. |
No |
IpAddress |
Standard MIB values. |
|
1.3.6.1.2.1.14.10.1.2 (ospfNbrAddressLessIndex) |
Set to 0 on an interface having an IP address, and set to the value of interface index in the Internet Standard MIB on an interface having no IP address. |
No |
InterfaceIndexOrZero |
Integer32 (0..2147483647) |
|
1.3.6.1.2.1.14.10.1.3 (ospfNbrRtrId) |
Router ID of the neighbor. |
No |
RouterID |
IpAddress |
|
1.3.6.1.2.1.14.10.1.12 (ospfNbrRestartHelperStatus) |
GR helper state. |
No |
INTEGER |
notHelping (1), helping (2) |
|
1.3.6.1.2.1.14.10.1.13 (ospfNbrRestartHelperAge) |
Remaining time of the GR interval when the router is acting as a GR helper for the neighbor. |
No |
Unsigned32 |
Standard MIB values. |
|
1.3.6.1.2.1.14.10.1.14 (ospfNbrRestartHelperExitReason) |
Reason why the GR helper exited. |
No |
INTEGER |
none (1), inProgress (2), completed (3), timedOut (4), topologyChanged (5) |
Recommended action
No action is required.
ospfVirtNbrRestartHelperStatusChange
Basic information
|
OID |
Event |
Type |
Severity |
Recovery notification |
Default status |
|
1.3.6.1.2.1.14.16.2.20 |
The GR helper state of a virtual neighbor changes. |
Informational |
Warning |
- |
ON |
Notification triggers
Notification Triggers
System impact
OID
Event
Type
Severity
Recovery notification
Default status
1.3.6.1.2.1.14.16.2.20
The GR helper state of a virtual neighbor changes.
Informational
Warning
-
ON
Description
A notification sent when the GR helper state of a virtual neighbor changes.
【System impact】
Status control
ON
CLI: Use the snmp-agent trap enable ospf virtgrhelper-status-change command.
OFF
CLI: Use the undo snmp-agent trap enable ospf virtgrhelper-status-change command.
Object
|
OID (object name) |
Description |
Index |
Type |
Value range |
|
1.3.6.1.2.1.14.1.1 (ospfRouterId) |
Unique identifier of a router in an AS. |
No |
RouterID |
IpAddress |
|
1.3.6.1.2.1.14.11.1.1 (ospfVirtNbrArea) |
ID of the area to which the virtual neighbor belongs. |
No |
AreaID |
IpAddress |
|
1.3.6.1.2.1.14.11.1.2 (ospfVirtNbrRtrId) |
A 32-bit integer that uniquely identifies the neighboring router in the AS. |
No |
RouterID |
IpAddress |
|
1.3.6.1.2.1.14.11.1.9 (ospfVirtNbrRestartHelperStatus) |
Whether the router is acting as a GR helper for the virtual neighbor. |
No |
INTEGER |
notHelping (1), helping (2) |
|
1.3.6.1.2.1.14.11.1.10 (ospfVirtNbrRestartHelperAge) |
Remaining time of the GR interval when the router is acting as a GR helper for the neighbor. |
No |
Unsigned32 |
Standard MIB values. |
|
1.3.6.1.2.1.14.11.1.11 (ospfVirtNbrRestartHelperExitReason) |
Reason why the GR helper exited. |
No |
INTEGER |
none (1), inProgress (2), completed (3), timedOu t 4), topologyChanged (5) |
Recommended action
No action is required.
