- Table of Contents
-
- H3C WX1800H Series Access Controllers Installation Guide-6W102
- 00-Preface
- 01-Preparing for installation
- 02-Installing the device
- 03-Troubleshooting
- 04-Hardware management and maintenance
- 05-Appendix A Chassis views and technical specifications
- 06-Appendix B LEDs
- 07-Appendix C Optional transceiver modules
- Related Documents
-
Title | Size | Download |
---|---|---|
07-Appendix C Optional transceiver modules | 98.86 KB |
7 Appendix C Optional transceiver modules·
Transceiver module, fiber connector, and optical fiber views
Transceiver module specifications
7 Appendix C Optional transceiver modules
Transceiver module, fiber connector, and optical fiber views
The WX1840H access controller provides SFP ports. To connect a SFP port on the device, use an SFP transceiver module and an optical fiber with LC connectors.
Figure7-1 SFP transceiver module
Figure7-2 Optical fiber with LC connectors
(1) LC connector |
(2) Optical fiber |
Transceiver module specifications
The transceiver modules that have MM and SM in their names support multi-mode optical fibers and single-mode optical fibers, respectively.
The SFP ports on the WX1840H access controller support the following transceiver modules:
· SFP-GE-LX-SM1310-A (seeTable7-1)
· SFP-GE-SX-MM850-A (see Table7-2)
Table7-1 SFP-GE-LX-SM1310-A specifications
Item |
Specification |
Central wavelength |
1310 nm |
Transmission distance |
10 km (6.21 miles) |
Transmission rate |
1250 Mbps |
Connector type |
Duplex LC |
Fiber mode |
SMF |
Fiber diameter |
9 µm |
Transmit power |
–9.5 to –3 dBm |
Receive sensitivity |
≤ –20 dBm |
Saturation |
≤ –3 dBm |
Table7-2 SFP-GE-SX-MM850-A specifications
Item |
Specification |
Central wavelength |
850 nm |
Transmission distance |
550 m (1804.46 ft) |
Transmission rate |
1250 Mbps |
Connector type |
Duplex LC |
Fiber mode |
MMF |
Fiber diameter |
50 µm |
Transmit power |
–9.5 to 0 dBm |
Receive sensitivity |
≤ –17 dBm |
Saturation |
≤ –3 dBm |