Login
- Table of Contents
- Related Documents
-
| Title | Size | Download |
|---|---|---|
| 06-Appendix B LEDs | 60.37 KB |
6 Appendix B LEDs
|
(1) 100/1000Base-T autosensing Ethernet copper port status LEDs |
|
|
(2) 1000Base-X SFP port status LEDs |
(3) System status LED (SYS) |
|
LED |
Mark |
Status |
Description |
|
System status LED |
SYS |
Flashing green (0.5 Hz) |
The system is operating correctly. |
|
Flashing green (4 Hz) |
The system is starting up. |
||
|
Steady red |
The system has failed POST or a serious fault has occurred. |
||
|
Off |
The system is powered off or a power failure has occurred. |
||
|
100/1000Base-T autosensing Ethernet copper port status LED |
N/A |
Steady green |
A 1000 Mbps link is present on the port. |
|
Flashing green |
The port is receiving or transmitting data at 1000 Mbps. |
||
|
Steady yellow |
A 100 Mbps link is present on the port. |
||
|
Flashing yellow |
The port is receiving or transmitting data at 100 Mbps. |
||
|
Off |
No link is present on the port. |
||
|
1000Base-X SFP autosensing port status LED |
N/A |
Steady green |
A 1000 Mbps link is present on the port. |
|
Flashing green |
The port is receiving or transmitting data at 1000 Mbps. |
||
|
Off |
No link is present on the port. |
