- Table of Contents
-
- H3C S3100-52P Command Manual-Release 1602(V1.01)
- 00-1Cover
- 01-CLI Command
- 02-Login Command
- 03-Configuration File Management Command
- 04-VLAN Command
- 05-IP Address and Performance Command
- 06-Voice VLAN Command
- 07-GVRP Command
- 08-Port Basic Configuration Command
- 09-Link Aggregation Command
- 10-Port Isolation Command
- 11-Port Security-Port Binding Command
- 12-DLDP Command
- 13-MAC Address Table Management Command
- 14-MSTP Command
- 15-Static Route Command
- 16-Multicast Command
- 17-802.1x and System Guard Command
- 18-AAA Command
- 19-Web Authentication Command
- 20-MAC Address Authentication Command
- 21-ARP Command
- 22-DHCP Command
- 23-ACL Command
- 24-QoS-QoS Profile Command
- 25-Mirroring Command
- 26-Stack-Cluster Command
- 27-SNMP-RMON Command
- 28-NTP Command
- 29-SSH Command
- 30-File System Management Command
- 31-FTP-SFTP-TFTP Command
- 32-Information Center Command
- 33-System Maintenance and Debugging Command
- 34-VLAN-VPN Command
- 35-HWPing Command
- 36-IPv6 Management Command
- 37-DNS Command
- 38-Smart Link-Monitor Link Command
- 39-Appendix
- Related Documents
-
Title | Size | Download |
---|---|---|
39-Appendix | 382.97 KB |
Appendix A Command Index
The command index includes all the commands in the Command Manual, which are arranged alphabetically.
A B C D E F G H I J K L M N O P Q R S T U V W X Y Z
|
| |
access-limit | 18-AAA Command | 1-1 |
accounting | 18-AAA Command | 1-2 |
accounting optional | 18-AAA Command | 1-3 |
accounting optional | 18-AAA Command | 1-32 |
accounting-on enable | 18-AAA Command | 1-33 |
acl | 02-Login Command | 2-1 |
acl | 23-ACL Command | 1-1 |
active region-configuration | 14-MSTP Command | 1-1 |
add-member | 26-Stack-Cluster Command | 2-14 |
administrator-address | 26-Stack-Cluster Command | 2-15 |
am user-bind | 11-Port Security-Port Binding Command | 2-1 |
apply qos-profile | 24-QoS-QoS Profile Command | 2-1 |
arp check enable | 21-ARP Command | 1-1 |
arp detection enable | 21-ARP Command | 1-2 |
arp detection trust | 21-ARP Command | 1-3 |
arp protective-down recover enable | 21-ARP Command | 1-3 |
arp protective-down recover interval | 21-ARP Command | 1-4 |
arp rate-limit | 21-ARP Command | 1-5 |
arp rate-limit enable | 21-ARP Command | 1-6 |
arp restricted-forwarding enable | 21-ARP Command | 1-6 |
arp static | 21-ARP Command | 1-7 |
arp timer aging | 21-ARP Command | 1-8 |
ascii | 31-FTP-SFTP-TFTP Command | 1-8 |
attribute | 18-AAA Command | 1-4 |
authentication | 18-AAA Command | 1-5 |
authentication super | 18-AAA Command | 1-7 |
authentication-mode | 02-Login Command | 1-1 |
authorization | 18-AAA Command | 1-8 |
authorization vlan | 18-AAA Command | 1-9 |
auto-build | 26-Stack-Cluster Command | 2-16 |
auto-execute command | 02-Login Command | 1-3 |
|
| |
binary | 31-FTP-SFTP-TFTP Command | 1-9 |
black-list | 26-Stack-Cluster Command | 2-44 |
boot attribute-switch | 30-File System Management Command | 1-17 |
boot boot-loader | 30-File System Management Command | 1-17 |
boot boot-loader | 33-System Maintenance and Debugging Command | 3-1 |
boot boot-loader backup-attribute | 30-File System Management Command | 1-18 |
boot bootrom | 33-System Maintenance and Debugging Command | 3-1 |
boot web-package | 30-File System Management Command | 1-18 |
bpdu-drop any | 14-MSTP Command | 1-2 |
bpdu-tunnel | 34-VLAN-VPN Command | 3-1 |
bpdu-tunnel tunnel-dmac | 34-VLAN-VPN Command | 3-3 |
broadcast-suppression | 08-Port Basic Configuration Command | 1-1 |
build | 26-Stack-Cluster Command | 2-19 |
burst-mode enable | 24-QoS-QoS Profile Command | 1-1 |
bye | 31-FTP-SFTP-TFTP Command | 1-9 |
bye | 31-FTP-SFTP-TFTP Command | 1-30 |
|
| |
calling-station-id mode | 18-AAA Command | 1-34 |
cd | 30-File System Management Command | 1-1 |
cd | 31-FTP-SFTP-TFTP Command | 1-10 |
cd | 31-FTP-SFTP-TFTP Command | 1-30 |
cdup | 31-FTP-SFTP-TFTP Command | 1-11 |
cdup | 31-FTP-SFTP-TFTP Command | 1-31 |
check region-configuration | 14-MSTP Command | 1-3 |
clock datetime | 33-System Maintenance and Debugging Command | 1-1 |
clock summer-time | 33-System Maintenance and Debugging Command | 1-2 |
clock timezone | 33-System Maintenance and Debugging Command | 1-3 |
close | 31-FTP-SFTP-TFTP Command | 1-11 |
cluster | 26-Stack-Cluster Command | 2-21 |
cluster enable | 26-Stack-Cluster Command | 2-21 |
cluster switch-to | 26-Stack-Cluster Command | 2-22 |
cluster-mac | 26-Stack-Cluster Command | 2-23 |
cluster-mac syn-interval | 26-Stack-Cluster Command | 2-24 |
command-privilege level | 01-CLI Command | 1-1 |
copy | 30-File System Management Command | 1-2 |
copy configuration | 08-Port Basic Configuration Command | 1-3 |
copyright-info enable | 02-Login Command | 1-4 |
count | 35-HWPing Command | 1-1 |
cut connection | 18-AAA Command | 1-9 |
|
| |
databits | 02-Login Command | 1-5 |
data-flow-format | 18-AAA Command | 1-35 |
data-flow-format | 18-AAA Command | 1-66 |
datasize | 35-HWPing Command | 1-2 |
debugging | 33-System Maintenance and Debugging Command | 1-9 |
delete | 30-File System Management Command | 1-3 |
delete | 31-FTP-SFTP-TFTP Command | 1-12 |
delete | 31-FTP-SFTP-TFTP Command | 1-32 |
delete static-routes all | 15-Static Route Command | 2-1 |
delete-member | 26-Stack-Cluster Command | 2-25 |
description | 04-VLAN Command | 1-1 |
description | 08-Port Basic Configuration Command | 1-5 |
description | 23-ACL Command | 1-2 |
destination-ip | 35-HWPing Command | 1-3 |
destination-port | 35-HWPing Command | 1-3 |
dhcp protective-down recover enable | 22-DHCP Command | 2-1 |
dhcp protective-down recover interval | 22-DHCP Command | 2-1 |
dhcp rate-limit | 22-DHCP Command | 2-2 |
dhcp rate-limit enable | 22-DHCP Command | 2-3 |
dhcp-snooping | 22-DHCP Command | 1-1 |
dhcp-snooping information enable | 22-DHCP Command | 1-2 |
dhcp-snooping information format | 22-DHCP Command | 1-2 |
dhcp-snooping information packet-format | 22-DHCP Command | 1-3 |
dhcp-snooping information remote-id | 22-DHCP Command | 1-4 |
dhcp-snooping information strategy | 22-DHCP Command | 1-4 |
dhcp-snooping information vlan circuit-id | 22-DHCP Command | 1-6 |
dhcp-snooping information vlan remote-id | 22-DHCP Command | 1-7 |
dhcp-snooping trust | 22-DHCP Command | 1-8 |
dir | 30-File System Management Command | 1-5 |
dir | 31-FTP-SFTP-TFTP Command | 1-12 |
dir | 31-FTP-SFTP-TFTP Command | 1-32 |
disconnect | 31-FTP-SFTP-TFTP Command | 1-14 |
display acl | 23-ACL Command | 1-3 |
display am user-bind | 11-Port Security-Port Binding Command | 2-2 |
display arp | 21-ARP Command | 1-9 |
display arp | | 21-ARP Command | 1-10 |
display arp count | 21-ARP Command | 1-11 |
display arp detection statistics interface | 21-ARP Command | 1-12 |
display arp timer aging | 21-ARP Command | 1-13 |
display boot-loader | 30-File System Management Command | 1-19 |
display boot-loader | 33-System Maintenance and Debugging Command | 3-2 |
display bootp client | 22-DHCP Command | 3-3 |
display bpdu-tunnel | 34-VLAN-VPN Command | 3-4 |
display brief interface | 08-Port Basic Configuration Command | 1-6 |
display channel | 32-Information Center Command | 1-1 |
display clock | 33-System Maintenance and Debugging Command | 1-6 |
display cluster | 26-Stack-Cluster Command | 2-26 |
display cluster base-members | 26-Stack-Cluster Command | 2-45 |
display cluster base-topology | 26-Stack-Cluster Command | 2-46 |
display cluster black-list | 26-Stack-Cluster Command | 2-47 |
display cluster candidates | 26-Stack-Cluster Command | 2-28 |
display cluster current-topology | 26-Stack-Cluster Command | 2-48 |
display cluster members | 26-Stack-Cluster Command | 2-30 |
display connection | 18-AAA Command | 1-11 |
display cpu | 33-System Maintenance and Debugging Command | 3-3 |
display current-configuration | 03-Configuration File Management Command | 1-1 |
display current-configuration vlan | 03-Configuration File Management Command | 1-7 |
display debugging | 33-System Maintenance and Debugging Command | 1-7 |
display device | 33-System Maintenance and Debugging Command | 3-4 |
display dhcp client | 22-DHCP Command | 3-1 |
display dhcp-snooping | 22-DHCP Command | 1-9 |
display dhcp-snooping trust | 22-DHCP Command | 1-9 |
display diagnostic-information | 33-System Maintenance and Debugging Command | 1-10 |
display dldp | 12-DLDP Command | 1-1 |
display dns domain | 37-DNS Command | 1-1 |
display dns dynamic-host | 37-DNS Command | 1-1 |
display dns ipv6 dynamic-host | 36-IPv6 Management Command | 1-1 |
display dns server | 37-DNS Command | 1-2 |
display domain | 18-AAA Command | 1-12 |
display dot1x | 17-802.1x and System Guard Command | 1-1 |
display drv qacl_resource | 23-ACL Command | 1-4 |
display fan | 33-System Maintenance and Debugging Command | 3-5 |
display fib | 05-IP Address and Performance Command | 2-1 |
display fib | | 05-IP Address and Performance Command | 2-4 |
display fib acl | 05-IP Address and Performance Command | 2-3 |
display fib ip-address | 05-IP Address and Performance Command | 2-2 |
display fib statistics | 05-IP Address and Performance Command | 2-5 |
display ftp source-ip | 31-FTP-SFTP-TFTP Command | 1-14 |
display ftp-server | 31-FTP-SFTP-TFTP Command | 1-1 |
display ftp-server source-ip | 31-FTP-SFTP-TFTP Command | 1-2 |
display ftp-user | 31-FTP-SFTP-TFTP Command | 1-3 |
display garp statistics | 07-GVRP Command | 1-1 |
display garp timer | 07-GVRP Command | 1-2 |
display gvrp statistics | 07-GVRP Command | 1-7 |
display gvrp status | 07-GVRP Command | 1-8 |
display habp | 17-802.1x and System Guard Command | 3-1 |
display habp table | 17-802.1x and System Guard Command | 3-2 |
display habp traffic | 17-802.1x and System Guard Command | 3-2 |
display history-command | 01-CLI Command | 1-3 |
display hwping | 35-HWPing Command | 1-4 |
display hwtacacs | 18-AAA Command | 1-67 |
display icmp statistics | 05-IP Address and Performance Command | 2-5 |
display igmp-snooping configuration | 16-Multicast Command | 2-1 |
display igmp-snooping group | 16-Multicast Command | 2-2 |
display igmp-snooping statistics | 16-Multicast Command | 2-4 |
display info-center | 32-Information Center Command | 1-2 |
display interface | 08-Port Basic Configuration Command | 1-7 |
display interface Vlan-interface | 04-VLAN Command | 1-2 |
display ip host | 37-DNS Command | 1-4 |
display ip interface | 05-IP Address and Performance Command | 1-1 |
display ip interface brief | 05-IP Address and Performance Command | 1-3 |
display ip routing-table | 15-Static Route Command | 1-1 |
display ip routing-table acl | 15-Static Route Command | 1-3 |
display ip routing-table ip-address | 15-Static Route Command | 1-6 |
display ip routing-table ip-address1 ip-address2 | 15-Static Route Command | 1-7 |
display ip routing-table protocol | 15-Static Route Command | 1-8 |
display ip routing-table radix | 15-Static Route Command | 1-9 |
display ip routing-table statistics | 15-Static Route Command | 1-10 |
display ip routing-table verbose | 15-Static Route Command | 1-11 |
display ip socket | 05-IP Address and Performance Command | 2-7 |
display ip source static binding | 22-DHCP Command | 1-10 |
display ip statistics | 05-IP Address and Performance Command | 2-9 |
display ipv6 fib | 36-IPv6 Management Command | 1-2 |
display ipv6 host | 36-IPv6 Management Command | 1-3 |
display ipv6 interface | 36-IPv6 Management Command | 1-4 |
display ipv6 neighbors | 36-IPv6 Management Command | 1-7 |
display ipv6 neighbors count | 36-IPv6 Management Command | 1-9 |
display ipv6 route-table | 36-IPv6 Management Command | 1-10 |
display ipv6 socket | 36-IPv6 Management Command | 1-12 |
display ipv6 statistics | 36-IPv6 Management Command | 1-13 |
display isolate port | 10-Port Isolation Command | 1-1 |
display lacp system-id | 09-Link Aggregation Command | 1-5 |
display link-aggregation interface | 09-Link Aggregation Command | 1-1 |
display link-aggregation summary | 09-Link Aggregation Command | 1-2 |
display link-aggregation verbose | 09-Link Aggregation Command | 1-4 |
display link-delay | 08-Port Basic Configuration Command | 1-12 |
display local-server statistics | 18-AAA Command | 1-36 |
display local-user | 18-AAA Command | 1-14 |
display logbuffer | 32-Information Center Command | 1-3 |
display logbuffer summary | 32-Information Center Command | 1-5 |
display loopback-detection | 08-Port Basic Configuration Command | 1-13 |
display mac-address | 13-MAC Address Table Management Command | 1-2 |
display mac-address aging-time | 13-MAC Address Table Management Command | 1-1 |
display mac-address multicast static | 16-Multicast Command | 1-1 |
display mac-address security | 11-Port Security-Port Binding Command | 1-1 |
display mac-authentication | 20-MAC Address Authentication Command | 1-1 |
display memory | 33-System Maintenance and Debugging Command | 3-5 |
display mirroring-group | 25-Mirroring Command | 1-1 |
display monitor-link group | 38-Smart Link-Monitor Link Command | 2-1 |
display multicast-source-deny | 16-Multicast Command | 1-2 |
display ndp | 26-Stack-Cluster Command | 2-1 |
display ntdp | 26-Stack-Cluster Command | 2-6 |
display ntdp device-list | 26-Stack-Cluster Command | 2-7 |
display ntdp single-device mac-address | 26-Stack-Cluster Command | 2-49 |
display ntp-service sessions | 28-NTP Command | 1-1 |
display ntp-service status | 28-NTP Command | 1-3 |
display ntp-service trace | 28-NTP Command | 1-4 |
display packet-drop | 08-Port Basic Configuration Command | 1-13 |
display packet-filter | 23-ACL Command | 1-6 |
display patch-information | 33-System Maintenance and Debugging Command | 3-6 |
display port | 04-VLAN Command | 1-10 |
display port vlan-vpn | 34-VLAN-VPN Command | 1-1 |
display port-mac | 13-MAC Address Table Management Command | 1-4 |
display port-security | 11-Port Security-Port Binding Command | 1-3 |
display power | 33-System Maintenance and Debugging Command | 3-7 |
display protocol-priority | 24-QoS-QoS Profile Command | 1-2 |
display protocol-vlan interface | 04-VLAN Command | 1-17 |
display protocol-vlan vlan | 04-VLAN Command | 1-19 |
display public-key local | 29-SSH Command | 1-1 |
display public-key peer | 29-SSH Command | 1-3 |
display qos cos-local-precedence-map | 24-QoS-QoS Profile Command | 1-3 |
display qos-interface all | 24-QoS-QoS Profile Command | 1-4 |
display qos-interface line-rate | 24-QoS-QoS Profile Command | 1-7 |
display qos-interface mirrored-to | 24-QoS-QoS Profile Command | 1-8 |
display qos-interface traffic-limit | 24-QoS-QoS Profile Command | 1-9 |
display qos-interface traffic-priority | 24-QoS-QoS Profile Command | 1-9 |
display qos-interface traffic-redirect | 24-QoS-QoS Profile Command | 1-10 |
display qos-interface traffic-remark-vlanid | 24-QoS-QoS Profile Command | 1-11 |
display qos-interface traffic-statistic | 24-QoS-QoS Profile Command | 1-12 |
display qos-profile | 24-QoS-QoS Profile Command | 2-2 |
display queue-scheduler | 24-QoS-QoS Profile Command | 1-12 |
display radius scheme | 18-AAA Command | 1-37 |
display radius statistics | 18-AAA Command | 1-39 |
display rmon alarm | 27-SNMP-RMON Command | 2-1 |
display rmon event | 27-SNMP-RMON Command | 2-2 |
display rmon eventlog | 27-SNMP-RMON Command | 2-3 |
display rmon history | 27-SNMP-RMON Command | 2-4 |
display rmon prialarm | 27-SNMP-RMON Command | 2-6 |
display rmon statistics | 27-SNMP-RMON Command | 2-8 |
display rsa local-key-pair public | 29-SSH Command | 1-4 |
display rsa peer-public-key | 29-SSH Command | 1-5 |
display saved-configuration | 03-Configuration File Management Command | 1-8 |
display schedule reboot | 33-System Maintenance and Debugging Command | 3-7 |
display sftp source-ip | 31-FTP-SFTP-TFTP Command | 1-33 |
display smart-link flush | 38-Smart Link-Monitor Link Command | 1-1 |
display smart-link group | 38-Smart Link-Monitor Link Command | 1-2 |
display snmp-agent | 27-SNMP-RMON Command | 1-1 |
display snmp-agent community | 27-SNMP-RMON Command | 1-2 |
display snmp-agent group | 27-SNMP-RMON Command | 1-3 |
display snmp-agent mib-view | 27-SNMP-RMON Command | 1-5 |
display snmp-agent statistics | 27-SNMP-RMON Command | 1-6 |
display snmp-agent sys-info | 27-SNMP-RMON Command | 1-9 |
display snmp-agent trap-list | 27-SNMP-RMON Command | 1-10 |
display snmp-agent usm-user | 27-SNMP-RMON Command | 1-11 |
display ssh server | 29-SSH Command | 1-7 |
display ssh server-info | 29-SSH Command | 1-8 |
display ssh user-information | 29-SSH Command | 1-9 |
display ssh2 source-ip | 29-SSH Command | 1-10 |
display ssh-server source-ip | 29-SSH Command | 1-10 |
display stacking | 26-Stack-Cluster Command | 1-1 |
display startup | 03-Configuration File Management Command | 1-12 |
display stop-accounting-buffer | 18-AAA Command | 1-41 |
display stop-accounting-buffer | 18-AAA Command | 1-68 |
display storm-constrain | 08-Port Basic Configuration Command | 1-14 |
display stp | 14-MSTP Command | 1-4 |
display stp abnormalport | 14-MSTP Command | 1-8 |
display stp portdown | 14-MSTP Command | 1-9 |
display stp region-configuration | 14-MSTP Command | 1-10 |
display stp root | 14-MSTP Command | 1-11 |
display system-guard ip state | 17-802.1x and System Guard Command | 4-1 |
display system-guard ip-record | 17-802.1x and System Guard Command | 4-2 |
display system-guard l3err state | 17-802.1x and System Guard Command | 4-3 |
display system-guard tcn state | 17-802.1x and System Guard Command | 4-3 |
display tcp ipv6 statistics | 36-IPv6 Management Command | 1-17 |
display tcp ipv6 status | 36-IPv6 Management Command | 1-19 |
display tcp statistics | 05-IP Address and Performance Command | 2-11 |
display tcp status | 05-IP Address and Performance Command | 2-14 |
display telnet source-ip | 02-Login Command | 1-7 |
display telnet-server source-ip | 02-Login Command | 1-6 |
display tftp source-ip | 31-FTP-SFTP-TFTP Command | 2-1 |
display this | 03-Configuration File Management Command | 1-13 |
display time-range | 23-ACL Command | 1-7 |
display transceiver alarm interface | 33-System Maintenance and Debugging Command | 3-8 |
display transceiver diagnosis interface | 33-System Maintenance and Debugging Command | 3-12 |
display transceiver interface | 33-System Maintenance and Debugging Command | 3-13 |
display transceiver manuinfo interface | 33-System Maintenance and Debugging Command | 3-14 |
display trapbuffer | 32-Information Center Command | 1-6 |
display udp ipv6 statistics | 36-IPv6 Management Command | 1-20 |
display udp statistics | 05-IP Address and Performance Command | 2-15 |
display unit | 08-Port Basic Configuration Command | 1-17 |
display user-interface | 02-Login Command | 1-7 |
display users | 02-Login Command | 1-10 |
display version | 33-System Maintenance and Debugging Command | 1-8 |
display vlan | 04-VLAN Command | 1-4 |
display vlan | 06-Voice VLAN Command | 1-3 |
display voice vlan error-info | 06-Voice VLAN Command | 1-1 |
display voice vlan oui | 06-Voice VLAN Command | 1-1 |
display voice vlan status | 06-Voice VLAN Command | 1-2 |
display web package | 30-File System Management Command | 1-20 |
display web users | 02-Login Command | 1-11 |
display web-authentication configuration | 19-Web Authentication Command | 1-1 |
display web-authentication connection | 19-Web Authentication Command | 1-2 |
dldp | 12-DLDP Command | 1-2 |
dldp authentication-mode | 12-DLDP Command | 1-3 |
dldp delaydown-timer | 12-DLDP Command | 1-8 |
dldp interval | 12-DLDP Command | 1-4 |
dldp reset | 12-DLDP Command | 1-5 |
dldp unidirectional-shutdown | 12-DLDP Command | 1-6 |
dldp work-mode | 12-DLDP Command | 1-7 |
dns domain | 37-DNS Command | 1-4 |
dns resolve | 37-DNS Command | 1-5 |
dns resolve-target | 35-HWPing Command | 1-13 |
dns server | 37-DNS Command | 1-6 |
dns server ipv6 | 36-IPv6 Management Command | 1-21 |
dns-server | 35-HWPing Command | 1-12 |
domain | 18-AAA Command | 1-16 |
domain delimiter | 18-AAA Command | 1-17 |
dot1x | 17-802.1x and System Guard Command | 1-5 |
dot1x authentication-method | 17-802.1x and System Guard Command | 1-7 |
dot1x dhcp-launch | 17-802.1x and System Guard Command | 1-8 |
dot1x free-ip | 17-802.1x and System Guard Command | 2-1 |
dot1x guest-vlan | 17-802.1x and System Guard Command | 1-9 |
dot1x handshake | 17-802.1x and System Guard Command | 1-10 |
dot1x handshake secure | 17-802.1x and System Guard Command | 1-11 |
dot1x max-user | 17-802.1x and System Guard Command | 1-12 |
dot1x port-control | 17-802.1x and System Guard Command | 1-13 |
dot1x port-method | 17-802.1x and System Guard Command | 1-14 |
dot1x quiet-period | 17-802.1x and System Guard Command | 1-15 |
dot1x re-authenticate | 17-802.1x and System Guard Command | 1-18 |
dot1x retry | 17-802.1x and System Guard Command | 1-16 |
dot1x retry-version-max | 17-802.1x and System Guard Command | 1-17 |
dot1x supp-proxy-check | 17-802.1x and System Guard Command | 1-19 |
dot1x timer | 17-802.1x and System Guard Command | 1-21 |
dot1x timer acl-timeout | 17-802.1x and System Guard Command | 2-2 |
dot1x timer reauth-period | 17-802.1x and System Guard Command | 1-23 |
dot1x url | 17-802.1x and System Guard Command | 2-2 |
dot1x version-check | 17-802.1x and System Guard Command | 1-24 |
duplex | 08-Port Basic Configuration Command | 1-18 |
|
| |
enable log updown | 08-Port Basic Configuration Command | 1-19 |
enable snmp trap updown | 27-SNMP-RMON Command | 1-12 |
execute | 30-File System Management Command | 1-6 |
exit | 31-FTP-SFTP-TFTP Command | 1-34 |
|
| |
file prompt | 30-File System Management Command | 1-7 |
filename | 35-HWPing Command | 1-13 |
fixdisk | 30-File System Management Command | 1-8 |
flow interval | 08-Port Basic Configuration Command | 1-21 |
flow-control | 08-Port Basic Configuration Command | 1-20 |
flush enable control-vlan | 38-Smart Link-Monitor Link Command | 1-3 |
format | 30-File System Management Command | 1-9 |
free user-interface | 02-Login Command | 1-12 |
free web-users | 02-Login Command | 2-2 |
frequency | 35-HWPing Command | 1-14 |
ftp | 31-FTP-SFTP-TFTP Command | 1-15 |
ftp { cluster | remote-server } source-interface | 31-FTP-SFTP-TFTP Command | 1-16 |
ftp { cluster | remote-server } source-ip | 31-FTP-SFTP-TFTP Command | 1-16 |
ftp cluster | 26-Stack-Cluster Command | 2-32 |
ftp disconnect | 31-FTP-SFTP-TFTP Command | 1-4 |
ftp server enable | 31-FTP-SFTP-TFTP Command | 1-5 |
ftp source-interface | 31-FTP-SFTP-TFTP Command | 1-17 |
ftp source-ip | 31-FTP-SFTP-TFTP Command | 1-18 |
ftp timeout | 31-FTP-SFTP-TFTP Command | 1-6 |
ftp-operation | 35-HWPing Command | 1-15 |
ftp-server | 26-Stack-Cluster Command | 2-33 |
ftp-server source-interface | 31-FTP-SFTP-TFTP Command | 1-6 |
ftp-server source-ip | 31-FTP-SFTP-TFTP Command | 1-7 |
|
| |
garp timer | 07-GVRP Command | 1-3 |
garp timer leaveall | 07-GVRP Command | 1-5 |
get | 31-FTP-SFTP-TFTP Command | 1-19 |
get | 31-FTP-SFTP-TFTP Command | 1-34 |
giant-frame statistics enable | 08-Port Basic Configuration Command | 1-22 |
gratuitous-arp-learning enable | 21-ARP Command | 1-13 |
gvrp | 07-GVRP Command | 1-8 |
gvrp registration | 07-GVRP Command | 1-9 |
|
| |
habp enable | 17-802.1x and System Guard Command | 3-3 |
habp server vlan | 17-802.1x and System Guard Command | 3-4 |
habp timer | 17-802.1x and System Guard Command | 3-5 |
header | 02-Login Command | 1-13 |
help | 31-FTP-SFTP-TFTP Command | 1-35 |
history-command max-size | 02-Login Command | 1-15 |
history-records | 35-HWPing Command | 1-16 |
holdtime | 26-Stack-Cluster Command | 2-34 |
http-operation | 35-HWPing Command | 1-17 |
http-string | 35-HWPing Command | 1-17 |
hwping | 35-HWPing Command | 1-18 |
hwping-agent enable | 35-HWPing Command | 1-19 |
hwping-server enable | 35-HWPing Command | 1-31 |
hwping-server tcpconnect | 35-HWPing Command | 1-32 |
hwping-server udpecho | 35-HWPing Command | 1-33 |
hwtacacs nas-ip | 18-AAA Command | 1-69 |
hwtacacs scheme | 18-AAA Command | 1-70 |
|
| |
icmp redirect send | 05-IP Address and Performance Command | 2-16 |
icmp unreach send | 05-IP Address and Performance Command | 2-17 |
idle-cut | 18-AAA Command | 1-18 |
idle-timeout | 02-Login Command | 1-16 |
igmp host-join | 16-Multicast Command | 2-18 |
igmp-snooping | 16-Multicast Command | 2-5 |
igmp-snooping fast-leave | 16-Multicast Command | 2-6 |
igmp-snooping general-query source-ip | 16-Multicast Command | 2-7 |
igmp-snooping group-limit | 16-Multicast Command | 2-8 |
igmp-snooping group-policy | 16-Multicast Command | 2-10 |
igmp-snooping host-aging-time | 16-Multicast Command | 2-12 |
igmp-snooping max-response-time | 16-Multicast Command | 2-13 |
igmp-snooping nonflooding-enable | 16-Multicast Command | 2-13 |
igmp-snooping querier | 16-Multicast Command | 2-14 |
igmp-snooping query-interval | 16-Multicast Command | 2-15 |
igmp-snooping router-aging-time | 16-Multicast Command | 2-16 |
igmp-snooping version | 16-Multicast Command | 2-17 |
igmp-snooping vlan-mapping | 16-Multicast Command | 2-17 |
info-center channel name | 32-Information Center Command | 1-7 |
info-center console channel | 32-Information Center Command | 1-7 |
info-center enable | 32-Information Center Command | 1-8 |
info-center logbuffer | 32-Information Center Command | 1-9 |
info-center loghost | 32-Information Center Command | 1-10 |
info-center loghost source | 32-Information Center Command | 1-11 |
info-center monitor channel | 32-Information Center Command | 1-12 |
info-center snmp channel | 32-Information Center Command | 1-12 |
info-center source | 32-Information Center Command | 1-13 |
info-center synchronous | 32-Information Center Command | 1-16 |
info-center timestamp | 32-Information Center Command | 1-17 |
info-center timestamp loghost | 32-Information Center Command | 1-18 |
info-center timestamp utc | 32-Information Center Command | 1-19 |
info-center trapbuffer | 32-Information Center Command | 1-20 |
instance | 14-MSTP Command | 1-12 |
interface | 08-Port Basic Configuration Command | 1-23 |
interface Vlan-interface | 04-VLAN Command | 1-6 |
ip address | 05-IP Address and Performance Command | 1-4 |
ip address bootp-alloc | 22-DHCP Command | 3-4 |
ip address dhcp-alloc | 22-DHCP Command | 3-2 |
ip check source ip-address | 22-DHCP Command | 1-11 |
ip host | 37-DNS Command | 1-7 |
ip http acl | 02-Login Command | 2-2 |
ip http shutdown | 02-Login Command | 1-16 |
ip route-static | 15-Static Route Command | 2-2 |
ip source static binding | 22-DHCP Command | 1-12 |
ip-pool | 26-Stack-Cluster Command | 2-35 |
ipv6 address | 36-IPv6 Management Command | 1-22 |
ipv6 address auto link-local | 36-IPv6 Management Command | 1-23 |
ipv6 address eui-64 | 36-IPv6 Management Command | 1-24 |
ipv6 address link-local | 36-IPv6 Management Command | 1-25 |
ipv6 host | 36-IPv6 Management Command | 1-26 |
ipv6 icmp-error | 36-IPv6 Management Command | 1-27 |
ipv6 nd dad attempts | 36-IPv6 Management Command | 1-28 |
ipv6 nd hop-limit | 36-IPv6 Management Command | 1-29 |
ipv6 nd ns retrans-timer | 36-IPv6 Management Command | 1-29 |
ipv6 nd nud reachable-time | 36-IPv6 Management Command | 1-30 |
ipv6 neighbor | 36-IPv6 Management Command | 1-31 |
ipv6 neighbors max-learning-num | 36-IPv6 Management Command | 1-32 |
ipv6 route-static | 36-IPv6 Management Command | 1-32 |
|
| |
jitter-interval | 35-HWPing Command | 1-19 |
jitter-packetnum | 35-HWPing Command | 1-20 |
jumboframe enable | 08-Port Basic Configuration Command | 1-23 |
|
| |
key | 18-AAA Command | 1-42 |
key | 18-AAA Command | 1-71 |
|
| |
lacp enable | 09-Link Aggregation Command | 1-6 |
lacp port-priority | 09-Link Aggregation Command | 1-6 |
lacp system-priority | 09-Link Aggregation Command | 1-7 |
lcd | 31-FTP-SFTP-TFTP Command | 1-20 |
level | 18-AAA Command | 1-19 |
line-rate | 24-QoS-QoS Profile Command | 1-13 |
link-aggregation group | 38-Smart Link-Monitor Link Command | 1-4 |
link-aggregation group | 38-Smart Link-Monitor Link Command | 2-2 |
link-aggregation group description | 09-Link Aggregation Command | 1-8 |
link-aggregation group mode | 09-Link Aggregation Command | 1-9 |
link-delay | 08-Port Basic Configuration Command | 1-24 |
local-server | 18-AAA Command | 1-43 |
local-server nas-ip | 18-AAA Command | 1-44 |
local-user | 18-AAA Command | 1-20 |
local-user password-display-mode | 18-AAA Command | 1-21 |
lock | 02-Login Command | 1-18 |
logging-host | 26-Stack-Cluster Command | 2-36 |
loopback | 08-Port Basic Configuration Command | 1-25 |
loopback-detection control enable | 08-Port Basic Configuration Command | 1-26 |
loopback-detection enable | 08-Port Basic Configuration Command | 1-27 |
loopback-detection interval-time | 08-Port Basic Configuration Command | 1-28 |
loopback-detection per-vlan enable | 08-Port Basic Configuration Command | 1-28 |
ls | 31-FTP-SFTP-TFTP Command | 1-20 |
ls | 31-FTP-SFTP-TFTP Command | 1-36 |
|
| |
mac-address | 13-MAC Address Table Management Command | 1-4 |
mac-address aging destination-hit enable | 13-MAC Address Table Management Command | 1-6 |
mac-address max-mac-count | 13-MAC Address Table Management Command | 1-7 |
mac-address multicast interface | 16-Multicast Command | 1-3 |
mac-address multicast vlan | 16-Multicast Command | 1-4 |
mac-address security | 11-Port Security-Port Binding Command | 1-6 |
mac-address timer | 13-MAC Address Table Management Command | 1-8 |
mac-address-mapping | 34-VLAN-VPN Command | 2-1 |
mac-authentication | 20-MAC Address Authentication Command | 1-4 |
mac-authentication authmode usernameasmacaddress | 20-MAC Address Authentication Command | 1-6 |
mac-authentication authmode usernamefixed | 20-MAC Address Authentication Command | 1-7 |
mac-authentication authpassword | 20-MAC Address Authentication Command | 1-8 |
mac-authentication authusername | 20-MAC Address Authentication Command | 1-9 |
mac-authentication domain | 20-MAC Address Authentication Command | 1-9 |
mac-authentication guest-vlan | 20-MAC Address Authentication Command | 1-11 |
mac-authentication interface | 20-MAC Address Authentication Command | 1-5 |
mac-authentication max-auth-num | 20-MAC Address Authentication Command | 1-13 |
mac-authentication timer | 20-MAC Address Authentication Command | 1-10 |
mac-authentication timer guest-vlan-reauth | 20-MAC Address Authentication Command | 1-14 |
management-vlan | 26-Stack-Cluster Command | 2-37 |
mdi | 08-Port Basic Configuration Command | 1-29 |
messenger | 18-AAA Command | 1-22 |
mirrored-to | 24-QoS-QoS Profile Command | 1-14 |
mirroring-group | 25-Mirroring Command | 1-3 |
mirroring-group mirroring-port | 25-Mirroring Command | 1-4 |
mirroring-group monitor-port | 25-Mirroring Command | 1-5 |
mirroring-group reflector-port | 25-Mirroring Command | 1-6 |
mirroring-group remote-probe vlan | 25-Mirroring Command | 1-7 |
mirroring-port | 25-Mirroring Command | 1-8 |
mkdir | 30-File System Management Command | 1-10 |
mkdir | 31-FTP-SFTP-TFTP Command | 1-21 |
mkdir | 31-FTP-SFTP-TFTP Command | 1-36 |
monitor-link group | 38-Smart Link-Monitor Link Command | 2-3 |
monitor-port | 25-Mirroring Command | 1-9 |
more | 30-File System Management Command | 1-11 |
move | 30-File System Management Command | 1-12 |
multicast static-group interface | 16-Multicast Command | 2-19 |
multicast static-group vlan | 16-Multicast Command | 2-20 |
multicast static-router-port | 16-Multicast Command | 2-21 |
multicast static-router-port vlan | 16-Multicast Command | 2-22 |
multicast-source-deny | 16-Multicast Command | 1-4 |
multicast-suppression | 08-Port Basic Configuration Command | 1-30 |
|
| |
name | 04-VLAN Command | 1-7 |
name | 18-AAA Command | 1-23 |
nas-ip | 18-AAA Command | 1-45 |
nas-ip | 18-AAA Command | 1-72 |
ndp enable | 26-Stack-Cluster Command | 2-3 |
ndp timer aging | 26-Stack-Cluster Command | 2-4 |
ndp timer hello | 26-Stack-Cluster Command | 2-5 |
nslookup type | 37-DNS Command | 1-7 |
ntdp enable | 26-Stack-Cluster Command | 2-9 |
ntdp explore | 26-Stack-Cluster Command | 2-10 |
ntdp hop | 26-Stack-Cluster Command | 2-11 |
ntdp timer | 26-Stack-Cluster Command | 2-12 |
ntdp timer hop-delay | 26-Stack-Cluster Command | 2-13 |
ntdp timer port-delay | 26-Stack-Cluster Command | 2-13 |
ntp-service access | 28-NTP Command | 1-5 |
ntp-service authentication enable | 28-NTP Command | 1-7 |
ntp-service authentication-keyid | 28-NTP Command | 1-7 |
ntp-service broadcast-client | 28-NTP Command | 1-8 |
ntp-service broadcast-server | 28-NTP Command | 1-9 |
ntp-service in-interface disable | 28-NTP Command | 1-10 |
ntp-service max-dynamic-sessions | 28-NTP Command | 1-10 |
ntp-service multicast-client | 28-NTP Command | 1-11 |
ntp-service multicast-server | 28-NTP Command | 1-12 |
ntp-service reliable authentication-keyid | 28-NTP Command | 1-13 |
ntp-service source-interface | 28-NTP Command | 1-13 |
ntp-service unicast-peer | 28-NTP Command | 1-14 |
ntp-service unicast-server | 28-NTP Command | 1-15 |
|
| |
open | 31-FTP-SFTP-TFTP Command | 1-22 |
|
| |
packet-filter | 23-ACL Command | 1-8 |
packet-filter | 24-QoS-QoS Profile Command | 2-4 |
packet-filter vlan | 23-ACL Command | 1-10 |
parity | 02-Login Command | 1-19 |
passive | 31-FTP-SFTP-TFTP Command | 1-23 |
password | 18-AAA Command | 1-23 |
password | 35-HWPing Command | 1-21 |
patch activate | 33-System Maintenance and Debugging Command | 3-15 |
patch delete | 33-System Maintenance and Debugging Command | 3-16 |
patch load | 33-System Maintenance and Debugging Command | 3-17 |
patch run | 33-System Maintenance and Debugging Command | 3-17 |
peer-public-key end | 29-SSH Command | 1-11 |
ping | 33-System Maintenance and Debugging Command | 2-1 |
ping ipv6 | 36-IPv6 Management Command | 2-1 |
port | 04-VLAN Command | 1-11 |
port | 38-Smart Link-Monitor Link Command | 1-5 |
port | 38-Smart Link-Monitor Link Command | 2-4 |
port access vlan | 04-VLAN Command | 1-11 |
port hybrid protocol-vlan vlan | 04-VLAN Command | 1-20 |
port hybrid pvid vlan | 04-VLAN Command | 1-12 |
port hybrid vlan | 04-VLAN Command | 1-13 |
port isolate | 10-Port Isolation Command | 1-1 |
port link-aggregation group | 09-Link Aggregation Command | 1-9 |
port link-type | 04-VLAN Command | 1-14 |
port monitor-link group | 38-Smart Link-Monitor Link Command | 2-5 |
port smart-link group | 38-Smart Link-Monitor Link Command | 1-6 |
port trunk permit vlan | 04-VLAN Command | 1-15 |
port trunk pvid vlan | 04-VLAN Command | 1-16 |
port-mac | 13-MAC Address Table Management Command | 1-9 |
port-security authorization ignore | 11-Port Security-Port Binding Command | 1-11 |
port-security enable | 11-Port Security-Port Binding Command | 1-7 |
port-security intrusion-mode | 11-Port Security-Port Binding Command | 1-8 |
port-security max-mac-count | 11-Port Security-Port Binding Command | 1-12 |
port-security ntk-mode | 11-Port Security-Port Binding Command | 1-13 |
port-security oui | 11-Port Security-Port Binding Command | 1-14 |
port-security port-mode | 11-Port Security-Port Binding Command | 1-15 |
port-security timer disableport | 11-Port Security-Port Binding Command | 1-20 |
port-security trap | 11-Port Security-Port Binding Command | 1-21 |
primary accounting | 18-AAA Command | 1-46 |
primary accounting | 18-AAA Command | 1-72 |
primary authentication | 18-AAA Command | 1-47 |
primary authentication | 18-AAA Command | 1-73 |
primary authorization | 18-AAA Command | 1-74 |
priority | 24-QoS-QoS Profile Command | 1-17 |
priority trust | 24-QoS-QoS Profile Command | 1-17 |
probe-failtimes | 35-HWPing Command | 1-22 |
protocol inbound | 02-Login Command | 1-19 |
protocol inbound | 29-SSH Command | 1-12 |
protocol-priority protocol-type | 24-QoS-QoS Profile Command | 1-18 |
protocol-vlan | 04-VLAN Command | 1-21 |
public-key local create | 29-SSH Command | 1-13 |
public-key local destroy | 29-SSH Command | 1-15 |
public-key local export dsa | 29-SSH Command | 1-18 |
public-key local export rsa | 29-SSH Command | 1-16 |
public-key peer | 29-SSH Command | 1-19 |
public-key peer import sshkey | 29-SSH Command | 1-20 |
public-key-code begin | 29-SSH Command | 1-21 |
public-key-code end | 29-SSH Command | 1-22 |
put | 31-FTP-SFTP-TFTP Command | 1-23 |
put | 31-FTP-SFTP-TFTP Command | 1-37 |
pwd | 30-File System Management Command | 1-12 |
pwd | 31-FTP-SFTP-TFTP Command | 1-24 |
pwd | 31-FTP-SFTP-TFTP Command | 1-38 |
|
| |
qos cos-local-precedence-map | 24-QoS-QoS Profile Command | 1-21 |
qos-profile | 24-QoS-QoS Profile Command | 2-5 |
qos-profile port-based | 24-QoS-QoS Profile Command | 2-5 |
queue-scheduler | 24-QoS-QoS Profile Command | 1-22 |
quit | 31-FTP-SFTP-TFTP Command | 1-25 |
quit | 31-FTP-SFTP-TFTP Command | 1-38 |
quit | 33-System Maintenance and Debugging Command | 1-4 |
|
| |
radius client | 18-AAA Command | 1-48 |
radius nas-ip | 18-AAA Command | 1-49 |
radius scheme | 18-AAA Command | 1-50 |
radius trap | 18-AAA Command | 1-51 |
radius-scheme | 18-AAA Command | 1-24 |
raw-vlan-id inbound | 34-VLAN-VPN Command | 2-2 |
reboot | 33-System Maintenance and Debugging Command | 3-18 |
reboot member | 26-Stack-Cluster Command | 2-37 |
region-name | 14-MSTP Command | 1-13 |
remotehelp | 31-FTP-SFTP-TFTP Command | 1-25 |
remote-probe vlan enable | 25-Mirroring Command | 1-10 |
remove | 31-FTP-SFTP-TFTP Command | 1-39 |
rename | 30-File System Management Command | 1-13 |
rename | 31-FTP-SFTP-TFTP Command | 1-26 |
rename | 31-FTP-SFTP-TFTP Command | 1-39 |
reset arp | 21-ARP Command | 1-14 |
reset counters interface | 08-Port Basic Configuration Command | 1-31 |
reset dns dynamic-host | 37-DNS Command | 1-8 |
reset dns ipv6 dynamic-host | 36-IPv6 Management Command | 1-33 |
reset dot1x statistics | 17-802.1x and System Guard Command | 1-25 |
reset garp statistics | 07-GVRP Command | 1-6 |
reset hwtacacs statistics | 18-AAA Command | 1-75 |
reset igmp-snooping statistics | 16-Multicast Command | 2-23 |
reset ip routing-table statistics protocol | 15-Static Route Command | 1-12 |
reset ip statistics | 05-IP Address and Performance Command | 2-18 |
reset ipv6 neighbors | 36-IPv6 Management Command | 1-34 |
reset ipv6 statistics | 36-IPv6 Management Command | 1-35 |
reset lacp statistics | 09-Link Aggregation Command | 1-10 |
reset logbuffer | 32-Information Center Command | 1-21 |
reset mac-authentication | 20-MAC Address Authentication Command | 1-11 |
reset ndp statistics | 26-Stack-Cluster Command | 2-5 |
reset packet-drop interface | 08-Port Basic Configuration Command | 1-32 |
reset radius statistics | 18-AAA Command | 1-52 |
reset recycle-bin | 30-File System Management Command | 1-14 |
reset saved-configuration | 03-Configuration File Management Command | 1-14 |
reset smart-link packets counter | 38-Smart Link-Monitor Link Command | 1-7 |
reset stop-accounting-buffer | 18-AAA Command | 1-52 |
reset stop-accounting-buffer | 18-AAA Command | 1-76 |
reset stp | 14-MSTP Command | 1-13 |
reset tcp ipv6 statistics | 36-IPv6 Management Command | 1-35 |
reset tcp statistics | 05-IP Address and Performance Command | 2-18 |
reset traffic-statistic | 24-QoS-QoS Profile Command | 1-25 |
reset trapbuffer | 32-Information Center Command | 1-22 |
reset udp ipv6 statistics | 36-IPv6 Management Command | 1-36 |
reset udp statistics | 05-IP Address and Performance Command | 2-19 |
retry | 18-AAA Command | 1-53 |
retry realtime-accounting | 18-AAA Command | 1-54 |
retry stop-accounting | 18-AAA Command | 1-56 |
retry stop-accounting | 18-AAA Command | 1-76 |
return | 33-System Maintenance and Debugging Command | 1-4 |
revision-level | 14-MSTP Command | 1-14 |
rmdir | 30-File System Management Command | 1-16 |
rmdir | 31-FTP-SFTP-TFTP Command | 1-26 |
rmdir | 31-FTP-SFTP-TFTP Command | 1-40 |
rmon alarm | 27-SNMP-RMON Command | 2-10 |
rmon event | 27-SNMP-RMON Command | 2-12 |
rmon history | 27-SNMP-RMON Command | 2-13 |
rmon prialarm | 27-SNMP-RMON Command | 2-14 |
rmon statistics | 27-SNMP-RMON Command | 2-16 |
rsa local-key-pair create | 29-SSH Command | 1-23 |
rsa local-key-pair destroy | 29-SSH Command | 1-25 |
rsa peer-public-key | 29-SSH Command | 1-25 |
rsa peer-public-key import sshkey | 29-SSH Command | 1-26 |
rule (for Advanced ACLs) | 23-ACL Command | 1-13 |
rule (for Basic ACLs) | 23-ACL Command | 1-11 |
rule (for Layer 2 ACLs) | 23-ACL Command | 1-22 |
rule (for user-defined ACLs) | 23-ACL Command | 1-25 |
rule comment | 23-ACL Command | 1-29 |
|
| |
save | 03-Configuration File Management Command | 1-15 |
schedule reboot at | 33-System Maintenance and Debugging Command | 3-19 |
schedule reboot delay | 33-System Maintenance and Debugging Command | 3-20 |
schedule reboot regularity | 33-System Maintenance and Debugging Command | 3-21 |
scheme | 18-AAA Command | 1-25 |
screen-length | 02-Login Command | 1-21 |
secondary accounting | 18-AAA Command | 1-57 |
secondary accounting | 18-AAA Command | 1-77 |
secondary authentication | 18-AAA Command | 1-57 |
secondary authentication | 18-AAA Command | 1-78 |
secondary authorization | 18-AAA Command | 1-79 |
security-policy-server | 18-AAA Command | 2-1 |
self-service-url | 18-AAA Command | 1-26 |
send | 02-Login Command | 1-21 |
send-trap | 35-HWPing Command | 1-23 |
server-type | 18-AAA Command | 1-58 |
service-type | 02-Login Command | 1-22 |
service-type | 18-AAA Command | 1-28 |
service-type multicast | 16-Multicast Command | 2-23 |
set authentication password | 02-Login Command | 1-24 |
sftp | 31-FTP-SFTP-TFTP Command | 1-40 |
sftp server enable | 31-FTP-SFTP-TFTP Command | 1-29 |
sftp source-interface | 31-FTP-SFTP-TFTP Command | 1-42 |
sftp source-ip | 31-FTP-SFTP-TFTP Command | 1-43 |
sftp timeout | 31-FTP-SFTP-TFTP Command | 1-29 |
shell | 02-Login Command | 1-25 |
shutdown | 04-VLAN Command | 1-7 |
shutdown | 08-Port Basic Configuration Command | 1-32 |
smart-link flush enable | 38-Smart Link-Monitor Link Command | 1-7 |
smart-link group | 38-Smart Link-Monitor Link Command | 1-8 |
smart-link group | 38-Smart Link-Monitor Link Command | 2-6 |
snmp-agent | 27-SNMP-RMON Command | 1-13 |
snmp-agent calculate-password | 27-SNMP-RMON Command | 1-14 |
snmp-agent community | 02-Login Command | 2-3 |
snmp-agent community | 27-SNMP-RMON Command | 1-15 |
snmp-agent group | 02-Login Command | 2-4 |
snmp-agent group | 27-SNMP-RMON Command | 1-16 |
snmp-agent local-engineid | 27-SNMP-RMON Command | 1-18 |
snmp-agent log | 27-SNMP-RMON Command | 1-19 |
snmp-agent mib-view | 27-SNMP-RMON Command | 1-20 |
snmp-agent packet max-size | 27-SNMP-RMON Command | 1-22 |
snmp-agent sys-info | 27-SNMP-RMON Command | 1-23 |
snmp-agent target-host | 27-SNMP-RMON Command | 1-24 |
snmp-agent trap enable | 27-SNMP-RMON Command | 1-26 |
snmp-agent trap ifmib | 27-SNMP-RMON Command | 1-27 |
snmp-agent trap life | 27-SNMP-RMON Command | 1-28 |
snmp-agent trap queue-size | 27-SNMP-RMON Command | 1-28 |
snmp-agent trap source | 27-SNMP-RMON Command | 1-29 |
snmp-agent usm-user | 02-Login Command | 2-5 |
snmp-agent usm-user { v1 | v2c } | 27-SNMP-RMON Command | 1-30 |
snmp-agent usm-user v3 | 27-SNMP-RMON Command | 1-32 |
snmp-host | 26-Stack-Cluster Command | 2-38 |
source-interface | 35-HWPing Command | 1-23 |
source-ip | 35-HWPing Command | 1-25 |
source-port | 35-HWPing Command | 1-25 |
speed | 02-Login Command | 1-26 |
speed | 08-Port Basic Configuration Command | 1-33 |
speed auto | 08-Port Basic Configuration Command | 1-34 |
ssh authentication-type default | 29-SSH Command | 1-27 |
ssh client assign | 29-SSH Command | 1-29 |
ssh client first-time enable | 29-SSH Command | 1-30 |
ssh server authentication-retries | 29-SSH Command | 1-31 |
ssh server compatible-ssh1x enable | 29-SSH Command | 1-32 |
ssh server rekey-interval | 29-SSH Command | 1-33 |
ssh server timeout | 29-SSH Command | 1-33 |
ssh user | 29-SSH Command | 1-34 |
ssh user assign | 29-SSH Command | 1-35 |
ssh user authentication-type | 29-SSH Command | 1-37 |
ssh user service-type | 29-SSH Command | 1-38 |
ssh2 | 29-SSH Command | 1-39 |
ssh2 source-interface | 29-SSH Command | 1-41 |
ssh2 source-ip | 29-SSH Command | 1-42 |
ssh-server source-interface | 29-SSH Command | 1-42 |
ssh-server source-ip | 29-SSH Command | 1-43 |
stacking | 26-Stack-Cluster Command | 1-3 |
stacking enable | 26-Stack-Cluster Command | 1-4 |
stacking ip-pool | 26-Stack-Cluster Command | 1-5 |
stack-port enable | 26-Stack-Cluster Command | 1-3 |
startup bootrom-access enable | 30-File System Management Command | 1-20 |
startup saved-configuration | 03-Configuration File Management Command | 1-17 |
state | 18-AAA Command | 1-29 |
state | 18-AAA Command | 1-59 |
stop-accounting-buffer enable | 18-AAA Command | 1-60 |
stopbits | 02-Login Command | 1-26 |
storm-constrain | 08-Port Basic Configuration Command | 1-34 |
storm-constrain control | 08-Port Basic Configuration Command | 1-35 |
storm-constrain enable | 08-Port Basic Configuration Command | 1-36 |
storm-constrain interval | 08-Port Basic Configuration Command | 1-37 |
stp | 14-MSTP Command | 1-15 |
stp bpdu-protection | 14-MSTP Command | 1-16 |
stp bridge-diameter | 14-MSTP Command | 1-17 |
stp compliance | 14-MSTP Command | 1-18 |
stp config-digest-snooping | 14-MSTP Command | 1-19 |
stp cost | 14-MSTP Command | 1-21 |
stp dot1d-trap | 14-MSTP Command | 1-22 |
stp edged-port | 14-MSTP Command | 1-23 |
stp interface | 14-MSTP Command | 1-24 |
stp interface config-digest-snooping | 14-MSTP Command | 1-25 |
stp interface cost | 14-MSTP Command | 1-27 |
stp interface edged-port | 14-MSTP Command | 1-28 |
stp interface loop-protection | 14-MSTP Command | 1-29 |
stp interface mcheck | 14-MSTP Command | 1-30 |
stp interface no-agreement-check | 14-MSTP Command | 1-31 |
stp interface point-to-point | 14-MSTP Command | 1-32 |
stp interface port priority | 14-MSTP Command | 1-33 |
stp interface root-protection | 14-MSTP Command | 1-34 |
stp interface transmit-limit | 14-MSTP Command | 1-35 |
stp loop-protection | 14-MSTP Command | 1-36 |
stp max-hops | 14-MSTP Command | 1-37 |
stp mcheck | 14-MSTP Command | 1-38 |
stp mode | 14-MSTP Command | 1-39 |
stp no-agreement-check | 14-MSTP Command | 1-40 |
stp pathcost-standard | 14-MSTP Command | 1-41 |
stp point-to-point | 14-MSTP Command | 1-43 |
stp port priority | 14-MSTP Command | 1-44 |
stp portlog | 14-MSTP Command | 1-45 |
stp portlog all | 14-MSTP Command | 1-46 |
stp priority | 14-MSTP Command | 1-46 |
stp region-configuration | 14-MSTP Command | 1-47 |
stp root primary | 14-MSTP Command | 1-48 |
stp root secondary | 14-MSTP Command | 1-49 |
stp root-protection | 14-MSTP Command | 1-51 |
stp tc-protection | 14-MSTP Command | 1-52 |
stp tc-protection threshold | 14-MSTP Command | 1-53 |
stp timer forward-delay | 14-MSTP Command | 1-54 |
stp timer hello | 14-MSTP Command | 1-55 |
stp timer max-age | 14-MSTP Command | 1-56 |
stp timer-factor | 14-MSTP Command | 1-57 |
stp transmit-limit | 14-MSTP Command | 1-58 |
super | 01-CLI Command | 1-4 |
super authentication-mode | 01-CLI Command | 1-5 |
super password | 01-CLI Command | 1-6 |
sysname | 33-System Maintenance and Debugging Command | 1-5 |
system-guard ip detect-maxnum | 17-802.1x and System Guard Command | 4-4 |
system-guard ip detect-threshold | 17-802.1x and System Guard Command | 4-4 |
system-guard ip enable | 17-802.1x and System Guard Command | 4-6 |
system-guard l3err enable | 17-802.1x and System Guard Command | 4-7 |
system-guard tcn enable | 17-802.1x and System Guard Command | 4-8 |
system-guard tcn rate-threshold | 17-802.1x and System Guard Command | 4-8 |
system-monitor enable | 33-System Maintenance and Debugging Command | 3-22 |
system-view | 33-System Maintenance and Debugging Command | 1-6 |
|
| |
tcp ipv6 timer fin-timeout | 36-IPv6 Management Command | 1-36 |
tcp ipv6 timer syn-timeout | 36-IPv6 Management Command | 1-37 |
tcp ipv6 window | 36-IPv6 Management Command | 1-37 |
tcp timer fin-timeout | 05-IP Address and Performance Command | 2-19 |
tcp timer syn-timeout | 05-IP Address and Performance Command | 2-20 |
tcp window | 05-IP Address and Performance Command | 2-20 |
telnet | 02-Login Command | 1-27 |
telnet ipv6 | 02-Login Command | 1-28 |
telnet ipv6 | 36-IPv6 Management Command | 2-3 |
telnet source-interface | 02-Login Command | 1-29 |
telnet source-ip | 02-Login Command | 1-30 |
telnet-server source-interface | 02-Login Command | 1-30 |
telnet-server source-ip | 02-Login Command | 1-31 |
terminal debugging | 32-Information Center Command | 1-22 |
terminal debugging | 33-System Maintenance and Debugging Command | 1-10 |
terminal logging | 32-Information Center Command | 1-23 |
terminal monitor | 32-Information Center Command | 1-23 |
terminal trapping | 32-Information Center Command | 1-24 |
test-enable | 35-HWPing Command | 1-27 |
test-failtimes | 35-HWPing Command | 1-28 |
test-type | 35-HWPing Command | 1-26 |
tftp { ascii | binary } | 31-FTP-SFTP-TFTP Command | 2-2 |
tftp get | 26-Stack-Cluster Command | 2-39 |
tftp get | 31-FTP-SFTP-TFTP Command | 2-2 |
tftp ipv6 | 36-IPv6 Management Command | 2-4 |
tftp put | 26-Stack-Cluster Command | 2-40 |
tftp put | 31-FTP-SFTP-TFTP Command | 2-4 |
tftp source-interface | 31-FTP-SFTP-TFTP Command | 2-6 |
tftp source-ip | 31-FTP-SFTP-TFTP Command | 2-7 |
tftp tftp-server source-interface | 31-FTP-SFTP-TFTP Command | 2-5 |
tftp tftp-server source-ip | 31-FTP-SFTP-TFTP Command | 2-5 |
tftp-server | 26-Stack-Cluster Command | 2-41 |
tftp-server acl | 31-FTP-SFTP-TFTP Command | 2-8 |
timeout | 35-HWPing Command | 1-29 |
timer | 18-AAA Command | 1-61 |
timer | 26-Stack-Cluster Command | 2-42 |
timer quiet | 18-AAA Command | 1-62 |
timer quiet | 18-AAA Command | 1-80 |
timer realtime-accounting | 18-AAA Command | 1-63 |
timer realtime-accounting | 18-AAA Command | 1-80 |
timer response-timeout | 18-AAA Command | 1-64 |
timer response-timeout | 18-AAA Command | 1-81 |
time-range | 23-ACL Command | 1-30 |
topology accept | 26-Stack-Cluster Command | 2-51 |
topology restore-from | 26-Stack-Cluster Command | 2-52 |
topology save-to | 26-Stack-Cluster Command | 2-53 |
tos | 35-HWPing Command | 1-29 |
tracemac | 26-Stack-Cluster Command | 2-43 |
tracert | 33-System Maintenance and Debugging Command | 2-3 |
tracert ipv6 | 36-IPv6 Management Command | 2-5 |
traffic-limit | 24-QoS-QoS Profile Command | 1-27 |
traffic-limit | 24-QoS-QoS Profile Command | 2-6 |
traffic-priority | 24-QoS-QoS Profile Command | 1-29 |
traffic-priority | 24-QoS-QoS Profile Command | 2-8 |
traffic-priority vlan | 24-QoS-QoS Profile Command | 1-32 |
traffic-redirect | 24-QoS-QoS Profile Command | 1-33 |
traffic-remark-vlanid | 24-QoS-QoS Profile Command | 1-35 |
traffic-statistic | 24-QoS-QoS Profile Command | 1-36 |
|
| |
undelete | 30-File System Management Command | 1-16 |
unicast-suppression | 08-Port Basic Configuration Command | 1-38 |
unknown-multicast drop enable | 16-Multicast Command | 1-6 |
user | 31-FTP-SFTP-TFTP Command | 1-27 |
user privilege level | 02-Login Command | 1-33 |
user-interface | 02-Login Command | 1-32 |
username | 35-HWPing Command | 1-30 |
user-name-format | 18-AAA Command | 1-65 |
user-name-format | 18-AAA Command | 1-82 |
|
| |
verbose | 31-FTP-SFTP-TFTP Command | 1-28 |
virtual-cable-test | 08-Port Basic Configuration Command | 1-39 |
vlan | 04-VLAN Command | 1-8 |
vlan-assignment-mode | 18-AAA Command | 1-30 |
vlan-mapping modulo | 14-MSTP Command | 1-58 |
vlan-vpn enable | 34-VLAN-VPN Command | 1-2 |
vlan-vpn inner-cos-trust | 34-VLAN-VPN Command | 1-3 |
vlan-vpn priority | 34-VLAN-VPN Command | 1-3 |
vlan-vpn tpid | 34-VLAN-VPN Command | 1-5 |
vlan-vpn tunnel | 14-MSTP Command | 1-60 |
vlan-vpn vid | 34-VLAN-VPN Command | 2-3 |
voice vlan | 06-Voice VLAN Command | 1-4 |
voice vlan aging | 06-Voice VLAN Command | 1-5 |
voice vlan enable | 06-Voice VLAN Command | 1-7 |
voice vlan legacy | 06-Voice VLAN Command | 1-7 |
voice vlan mac-address | 06-Voice VLAN Command | 1-8 |
voice vlan mode | 06-Voice VLAN Command | 1-9 |
voice vlan security enable | 06-Voice VLAN Command | 1-10 |
|
| |
web-authentication cut connection | 19-Web Authentication Command | 1-3 |
web-authentication enable | 19-Web Authentication Command | 1-4 |
web-authentication free-ip | 19-Web Authentication Command | 1-4 |
web-authentication free-user | 19-Web Authentication Command | 1-5 |
web-authentication max-connection | 19-Web Authentication Command | 1-6 |
web-authentication select method | 19-Web Authentication Command | 1-7 |
web-authentication timer idle-cut | 19-Web Authentication Command | 1-8 |
web-authentication web-server | 19-Web Authentication Command | 1-9 |
wred | 24-QoS-QoS Profile Command | 1-37 |
|
| |
xmodem get | 33-System Maintenance and Debugging Command | 3-23 |
|
| |
|
|