H3C S9500 Series Routing Switches

Command Manual

Hangzhou H3C Technologies Co., Ltd.

http://www.h3c.com

Manual Version: T2-08192R-20071125-C-1.01

Product Version: S9500-CMW310-R1278

H3C S9500 Series Routing Switches  Installation Manual

It provides information for the system installation, booting, hardware/software maintenance & monitoring.

H3C S9500 Series Routing Switches  Operation Manual

It includes getting started, port, VLAN-QinQ, network protocol, routing protocol, multicast protocol, QACL，MPLS, STP, security,reliability, system management, PoE,NAT-URPF-VPLS,integrated management, and appendix.

1 Getting Started

This module introduces the commands available in the S9500 series.

2 Port

This module focuses on the commands for the configuration on Ethernet ports, POS ports, RPR ports, link aggregation, and IDS cooperation.

3 VLAN-QinQ

This module elaborates on the commands for VLAN, GARP, super VLAN and QinQ configuration.

4 Network Protocol

This module details the commands for the configuration on network protocols, including those for IP address, ARP, DHCP, DNS and IP performance configuration..

5 Routing Protocol

This module concentrates on the commands for the configuration on routing protocols, including those for static routing, RIP, OSPF, IS-IS, BGP and routing policy configuration.management.

6 Multicast Protocol

This module presents the commands for the configuration on multicast protocols, including those for IGMP Snooping, IGMP multicast VLAN, PIM-DM, PIM-SM, MSDP and MBGP multicast extension configuration.

7 QACL

This module introduces the commands for QoS/ACL configuration.

8 MPLS

This module introduces the commands for MPLS and BGP/MPLS VPN configuration.

9 STP

This module introduces the commands for STP configuration.

10 Security

This module presents the commands for the configuration on 802.1x, AAA and RADIUS protocols, HABP, and HWTACACS protocol.

11 Reliability

This module focuses on the commands for VRRP and HA configuration.

12 System Management

This module details the commands for the configuration involved in system management and maintenance, including those for file management, system management, SNMP, RMON, NTP protocol, SSH terminal services and network management configuration.

13 PoE

This module introduces the commands for remote power-feeding configuration.

14 NAT-URPF-VPLS

This module details the commands for NAT, URPF, VPLS configurations

15 Integrated Management

This module details the commands for HGMP V1 configuration.

16 Appendix

This appendix offers an index for all the commands available in the S9500 series.

Boldface

The keywords of a command line are in Boldface.

italic

Command arguments are in italic.

[ ]

Items (keywords or arguments) in square brackets [ ] are optional.

{ x | y | ... }

Alternative items are grouped in braces and separated by vertical bars. One is selected.

[ x | y | ... ]

Optional alternative items are grouped in square brackets and separated by vertical bars. One or none is selected.

{ x | y | ... } *

Alternative items are grouped in braces and separated by vertical bars. A minimum of one or a maximum of all can be selected.

[ x | y | ... ] *

Optional alternative items are grouped in square brackets and separated by vertical bars. Many or none can be selected.

&<1-n>

The argument(s) before the ampersand (&) sign can be entered 1 to n times.

#

A line starting with the # sign is comments.

< >

Button names are inside angle brackets. For example, click <OK>.

[ ]

Window names, menu items, data table and field names are inside square brackets. For example, pop up the [New User] window.

/

Multi-level menus are separated by forward slashes. For example, [File/Create/Folder].

  Warning

Means reader be extremely careful. Improper operation may cause bodily injury.

  Caution

Means reader be careful. Improper operation may cause data loss or damage to equipment.

&  Note

Means a complementary description.