01-License Management Command Reference

HomeSupportResource CenterH3C Access Controllers Command References(R5426P02)-6W10301-License Management Command Reference
01-AP license synchronization commands
Title Size Download
01-AP license synchronization commands 45.18 KB

AP license synchronization commands

The following compatibility matrixes show the support of hardware platforms for AP license synchronization:

 

Hardware series

Model

Product code

AP license synchronization compatibility

WX1800H series

WX1804H

EWP-WX1804H-PWR-CN

No

WX2500H series

WX2508H-PWR-LTE

WX2510H

WX2510H-F

WX2540H

WX2540H-F

WX2560H

EWP-WX2508H-PWR-LTE

EWP-WX2510H-PWR

EWP-WX2510H-F-PWR

EWP-WX2540H

EWP-WX2540H-F

EWP-WX2560H

No

WX3000H series

WX3010H

WX3010H-X

WX3010H-L

WX3024H

WX3024H-L

WX3024H-F

EWP-WX3010H

EWP-WX3010H-X-PWR

EWP-WX3010H-L-PWR

EWP-WX3024H

EWP-WX3024H-L-PWR

EWP-WX3024H-F

No

WX3500H series

WX3508H

WX3510H

WX3520H

WX3520H-F

WX3540H

EWP-WX3508H

EWP-WX3510H

EWP-WX3520H

EWP-WX3520H-F

EWP-WX3540H

Yes

WX5500E series

WX5510E

WX5540E

EWP-WX5510E

EWP-WX5540E

Yes

WX5500H series

WX5540H

WX5560H

WX5580H

EWP-WX5540H

EWP-WX5560H

EWP-WX5580H

Yes

Access controller modules

LSUM1WCME0

EWPXM1WCME0

LSQM1WCMX20

LSUM1WCMX20RT

LSQM1WCMX40

LSUM1WCMX40RT

EWPXM2WCMD0F

EWPXM1MAC0F

LSUM1WCME0

EWPXM1WCME0

LSQM1WCMX20

LSUM1WCMX20RT

LSQM1WCMX40

LSUM1WCMX40RT

EWPXM2WCMD0F

EWPXM1MAC0F

Yes

Hardware series

Model

Product code

AP license synchronization compatibility

WX1800H series

WX1804H

WX1810H

WX1820H

WX1840H

EWP-WX1804H-PWR

EWP-WX1810H-PWR

EWP-WX1820H

EWP-WX1840H-GL

No

WX3800H series

WX3820H

WX3840H

EWP-WX3820H-GL

EWP-WX3840H-GL

Yes

WX5800H series

WX5860H

EWP-WX5860H-GL

Yes

ap-license-synchronization enable

Use ap-license-synchronization enable to enable the AP license synchronization feature.

Use undo ap-license-synchronization enable to disable the AP license synchronization feature

Syntax

ap-license-synchronization enable

undo ap-license-synchronization enable

Default

AP license synchronization is disabled.

Views

AP license synchronization group view

Predefined user roles

network-admin

Usage guidelines

This feature synchronizes AP licenses from master ACs to the backup AC in an AP license synchronization group via AP license synchronization connections.

Before enabling this feature, specify IP addresses and roles for the AC and its member ACs in the AP license synchronization group.

·           In a dual-link backup network, configure both ACs as the master devices.

·           In an N+1 cold-backup network, configure a minimum of one AC as the backup device and a maximum of four ACs as the master devices.

Examples

# Enable AP license synchronization.

<Sysname> system-view

[Sysname] wlan ap-license-group

[Sysname-wlan-ap-license-group] ap-license-synchronization enable

display wlan ap-license-group

Use display wlan ap-license-group to display AP license synchronization group information.

Syntax

display wlan ap-license-group

Views

Any view

Predefined user roles

network-admin

network-operator

Examples

# Display AP license synchronization group information.

<Sysname> display wlan ap-license-group

Group total licenses: 256

Group used licenses: 128

AP license synchronization: Enabled

Local IP: 2.2.2.2

Local role: Master

Member information:

IP address       Total     Used    Member role   State   Online duration

 2.2.2.3         128       64      Master        Up      00hr 00min 04sec

 2.2.2.4         128       64      Backup        Up      00hr 00min 09sec

 2.2.2.5         N/A       N/A     Master        Down    00hr 00min 00sec

 2.2.2.6         N/A       N/A     Master        Down    00hr 00min 00sec

Table 1 Command output

Fields

Description

Group total licenses

Total number of AP licenses in the AP synchronization group.

Group used licenses

Number of used AP licenses in the AP synchronization group.

AP license synchronization

Whether the AP synchronization feature is enabled.

Local IP

IP address of the local AC.

Local role

Role of the local AC:

·          Master.

·          Backup.

·          Not configured.

IP address

IP address of a member AC in the AP synchronization group.

Total

Total number of AP licenses for the member AC.

Used

Number of used AP licenses for the member AC.

Member role

Role of the member AC:

·          Master.

·          Backup.

State

Member status in the AP license synchronization group:

·          Up.

·          Down.

Online duration

Accumulated online duration of the member AC.

 

local ip

Use local ip to specify the IP address and role for the AC in an AP license synchronization group.

Use undo local ip to restore the default.

Syntax

local ip ipv4-address [ backup ]

undo local ip

Default

No IP address and role is specified for the AC in the AP license synchronization group.

Views

AP license synchronization group view

Predefined user roles

network-admin

Parameters

ipv4-address: Specifies the IPv4 address of the AC in the AP license synchronization group.

backup: Specifies the backup role for the AC in the AP license synchronization group. If you do not specify this keyword, the AC acts as the master AC.

Usage guidelines

Before executing this command, make sure the AP license synchronization feature is disabled.

Examples

# Specify the IP address and role for the AC in the AP license synchronization group.

<Sysname> system-view

[Sysname] wlan ap-license-group

[Sysname-wlan-ap-license-group] local ip 192.168.10.10 backup

member ip

Use member ip to add a member AC to an AP license synchronization group.

Use undo member ip to delete a member AC from the AP license synchronization group

Syntax

member ip ipv4-address [ backup ]

undo member ip ipv4-address

Default

An AP license synchronization group does not have any member ACs.

Views

AP license synchronization group view

Predefined user roles

network-admin

Parameters

ipv4-address: Specifies the IPv4 address of a member AC.

backup: Specifies the backup role for the member AC in the AP license synchronization group. If you do not specify this keyword, the member AC acts as the master AC.

Usage guidelines

Before executing this command, make sure the AP license synchronization feature is disabled.

You can add a maximum of four member ACs in the AP license synchronization group.

The AP license synchronization group can have a minimum of one AC that is specified as the backup device.

Examples

# Add a member AC to the AP license synchronization group.

<Sysname> system-view

[Sysname] wlan ap-license-group

[Sysname-wlan-ap-license-group] member ip 192.168.10.11 backup

wlan ap-license-group

Use wlan ap-license-group to enter AP license synchronization group view.

Syntax

wlan ap-license-group

Views

System view

Predefined user roles

network-admin

Usage guidelines

An AC can have only one AP license synchronization group.

Examples

# Enter AP license synchronization group view

<Sysname> system-view

[Sysname] wlan ap-license-group

[Sysname-wlan-ap-license-group]