04-Layer 3-IP Services Command Reference

HomeSupportResource CenterH3C S6520X & S6520-SI & S5560X-HI & S5000-EI Switch Series Command References-R65xx-6W10004-Layer 3-IP Services Command Reference
14-IPv6 fast forwarding commands
Title Size Download
14-IPv6 fast forwarding commands 49.48 KB

IPv6 fast forwarding commands

display ipv6 fast-forwarding aging-time

Use display ipv6 fast-forwarding aging-time to display the aging time of IPv6 fast forwarding entries.

Syntax

display ipv6 fast-forwarding aging-time

Views

Any view

Predefined user roles

network-admin

network-operator

Examples

# Display the aging time of IPv6 fast forwarding entries.

<Sysname> display ipv6 fast-forwarding aging-time

Aging time: 30s

Table 1 Command output

Field

Description

Aging time

Aging time of IPv6 fast forwarding entries, in seconds.

 

Related commands

ipv6 fast-forwarding aging-time

display ipv6 fast-forwarding cache

Use display ipv6 fast-forwarding cache to display IPv6 fast forwarding entries.

Syntax

display ipv6 fast-forwarding cache [ ipv6-address ] [ slot slot-number ]

Views

Any view

Predefined user roles

network-admin

network-operator

Parameters

ipv6-address: Specifies an IPv6 address. If you do not specify an IPv6 address, this command displays all IPv6 fast forwarding entries.

slot slot-number: Specifies an IRF member device by its member ID. If you do not specify a member device, this command displays IPv6 fast forwarding entries for all member devices.

Examples

# Display all IPv6 fast forwarding entries.

<Sysname> display ipv6 fast-forwarding cache

Total number of IPv6 fast-forwarding items: 2

Src IP: 123::2                                         Src Port: 1036

Dst IP: 123::1                                         Dst Port: 32768

Protocol: 58

VPN instance: N/A

Input interface: Vlan2

Output interface: InLoop0

 

Src IP: 123::1                                         Src Port: 1036

Dst IP: 123::2                                         Dst Port: 33024

Protocol: 58

VPN instance: N/A

Input interface: InLoop0

Output interface: Vlan2

Table 2 Command output

Field

Description

Total number of IPv6 fast-forwarding items

Number of IPv6 fast forwarding entries.

Src IP

Source IPv6 address.

Src port

Source port number.

Dst IP

Destination IPv6 address.

Dst Port

Destination port number.

Protocol

Protocol number.

VPN instance

VPN instance. If the entry does not belong to any VPN instance, this field displays N/A.

Input interface

Input interface type and number.

If no interface is involved in fast forwarding, this field displays N/A.

If the input interface does not exist, this field displays a hyphen (-).

Output interface

Output interface type and number.

If no interface is involved in fast forwarding, this field displays N/A.

If the output interface does not exist, this field displays a hyphen (-).

 

Related commands

reset ipv6 fast-forwarding cache

ipv6 fast-forwarding aging-time

Use ipv6 fast-forwarding aging-time to set the aging time for IPv6 fast forwarding entries.

Use undo ipv6 fast-forwarding aging-time to restore the default.

Syntax

ipv6 fast-forwarding aging-time aging-time

undo ipv6 fast-forwarding aging-time

Default

The aging time is 30 seconds.

Views

System view

Predefined user roles

network-admin

Parameters

aging-time: Sets the aging time in the range of 10 to 300 seconds.

Examples

# Set the aging time to 20 seconds for IPv6 fast forwarding entries.

<Sysname> system-view

[Sysname] ipv6 fast-forwarding aging-time 20

Related commands

display ipv6 fast-forwarding aging-time

ipv6 fast-forwarding load-sharing

Use ipv6 fast-forwarding load-sharing to enable IPv6 fast forwarding load sharing.

Use undo ipv6 fast-forwarding load-sharing to disable IPv6 fast forwarding load sharing.

Syntax

ipv6 fast-forwarding load-sharing

undo ipv6 fast-forwarding load-sharing

Default

IPv6 fast forwarding load sharing is enabled.

Views

System view

Predefined user roles

network-admin

Usage guidelines

IPv6 fast forwarding load sharing enables the device to load share packets of the same flow. This feature identifies a data flow by using the packet information.

If IPv6 fast forwarding load sharing is disabled, the device identifies a data flow by the packet information and the input interface. No load sharing is implemented.

Examples

# Enable IPv6 fast forwarding load sharing.

<Sysname> system-Views

[Sysname] ipv6 fast-forwarding load-sharing

reset ipv6 fast-forwarding cache

Use reset ipv6 fast-forwarding cache to clear the IPv6 fast forwarding table.

Syntax

reset ipv6 fast-forwarding cache [ slot slot-number ]

Views

User view

Predefined user roles

network-admin

Parameters

slot slot-number: Specifies an IRF member device by its member ID. If you do not specify a member device, this command clears the IPv6 fast forwarding table for all member devices.

Examples

# Clear the IPv6 fast forwarding table.

<Sysname> reset ipv6 fast-forwarding cache

Related commands

display ipv6 fast-forwarding cache