01-Fundamentals Command Reference

HomeSupportResource CenterH3C S6520X & S6520-SI & S5560X-HI & S5000-EI Switch Series Command References-R65xx-6W10001-Fundamentals Command Reference
13-License management commands
Title Size Download
13-License management commands 63.36 KB

License management commands

display license

Use display license to display detailed license information.

Syntax

display license [ activation-file ] [ slot slot-number ]

Views

Any view

Predefined user roles

network-admin

network-operator

Parameters

activation-file: Displays license information about activation files. The device supports license installation only through activation files, so this command always displays license information about activation files whether you specify this keyword or not.

slot slot-number: Specifies the member ID of an IRF member device. If no member device is specified, this command displays license information for all IRF member devices.

Usage guidelines

The display license command displays detailed information about all licenses if it is used without the activation-file keyword.

Examples

# Display detailed information about all licenses.

<Sysname> display license

Slot 1:                                                                        

flash:/license/210235A1XE01234567892017050317574882633.ak                      

Feature: APMGR                                                                 

Product Description: Enhanced Access Controller License,128 APs,for Verticals,fo

r V7                                                                            

Registered at: 2013-01-01 09:26:52                                             

License Type: Trial (days restricted)                                          

Trial Time Left (days): 30                                                      

Current State: In use

Table 1 Command output

Field

Description

Feature

Feature name.

Product Description

License description.

Registered at

Time when the license was installed.

License Type

License type by validity period:

·     NA—The system cannot obtain the license type.

·     Permanent—Purchased license that never expires and is always valid.

·     Trial (days restricted)—Free trial license that is valid for a period of days.

Trial Time Left (days)

Remaining days of the trial period. This field is available for a trial license.

Current State

State of the license:

·     In use—The license is being used.

·     Usable—The license is available for use. If multiple days-restricted licenses for one feature are installed, only one license is in In use state and the rest licenses are in Usable state.

·     Expired—The license has expired.

·     Uninstalled—The license has been uninstalled.

·     Unusable—The license cannot be used.

·     Invalid—The license is invalid and cannot be used.

Uninstall Key

This field is available for licenses that have been uninstalled.

When you uninstall an activation file, an Uninstall file that contains an Uninstall key is created.

Uninstall Date

Date when the activation file was uninstalled.

 

display license device-id

Use display license device-id to display SN and DID information.

Syntax

display license device-id slot slot-number

Views

Any view

Predefined user roles

network-admin

network-operator

Parameters

slot slot-number: Specifies the member ID of an IRF member device.

Usage guidelines

When you register a license for a device, you must provide its unique SN and DID.

The DID changes each time you use the license compress command to compress the license storage. Use the display license device-id command to identify the up-to-date DID each time you register licenses.

The DID can be generated as a .did file. Upload the file when you register the license with the license center.

Examples

# Display the SN and DID for the specified slot.

<Sysname> display license device-id slot 1

SN: 210235A045B05B0004350                                                      

Device ID: flash:/license/210235A045B05B0004350.did

display license feature

Use display license feature to display brief license information for features.

Syntax

display license feature

Views

Any view

Predefined user roles

network-admin

network-operator

Examples

# Display brief feature license information.

<Sysname> display license feature

Slot 1:

Slot 1:                                                                        

Total: 64  Usage: 0                                                            

Feature                         Licensed        State                          

APMGR                           N               -  

Table 2 Command output

Field

Description

Total

Total number of licenses that can be installed.

Usage

Number of licenses stored in the license storage.

Feature

Feature that must be licensed before being used.

Licensed

Licensing state of the feature:

·     N—Not licensed.

·     Y—Licensed.

State

License type by purchasing state:

·     Formal—Purchased license.

·     Trial—Trial license.

If the feature is not licensed, this field displays a hyphen (-). To use the feature, you must install a valid license file.

 

license activation-file install

Use license activation-file install to install an activation file.

Syntax

license activation-file install file-name slot slot-number

Views

System view

Predefined user roles

network-admin

Parameters

file-name: Specifies the file path, a case-sensitive string of 1 to 127 characters. The activation file must be valid and stored on the device.

slot slot-number: Specifies the member ID of an IRF member device.

Usage guidelines

To install a license activation file successfully, make sure the SN and DID used for registering the feature license matches the current SN and DID of the device.

Activation files are device locked rather than MPU locked. A licensed feature can run on the entire system even after an MPU replacement.

Examples

# Install activation file 20130811.ak to the specified slot.

<Sysname> system-view

[Sysname] license activation-file install flash:/license/20130811.ak slot 1

This operation might take some time. Do not perform any other operations until the operation is completed or a failure message is displayed. Please wait...

Related commands

display license activation-file

display license device-id

license activation-file uninstall

license activation-file uninstall

Use license activation-file uninstall to uninstall an activation file.

Syntax

license activation-file uninstall file-name slot slot-number

Views

System view

Predefined user roles

network-admin

Parameters

file-name: Specifies the file path, a case-sensitive string of 1 to 127 characters.

slot slot-number: Specifies the member ID of an IRF member device.

Usage guidelines

Use this command to revoke an unexpired license if you want to transfer the license from one device to another.

When an activation file is uninstalled, the system creates an Uninstall file. Use this file together with the SN and DID of the transfer destination to register the license for the transfer destination.

A feature cannot run after you uninstall all of its activation files.

Trial licenses are not transferrable. When you uninstall the activation file of a trial license, no Uninstall file is created.

Examples

# Uninstall activation file flash:/license/20130811.ak from the specified slot.

<Sysname> system-view

[Sysname] license activation-file uninstall flash:/license/20130811.ak slot 1

This operation might take some time. Do not perform any other operations until the operation is completed or a failure message is displayed. Please wait...

Uninstall file: flash:/license/20130811.uak

Related commands

display license activation-file

license activation-file install

license compress

Use license compress to compress the license storage.

Syntax

license compress slot slot-number

Views

System view

Predefined user roles

network-admin

Parameters

slot slot-number: Specifies the member ID of an IRF member device.

Usage guidelines

Use this command if the free license storage (see the display license feature command) is not sufficient.

This command clears expired licenses and uninstalled licenses that are installed by using activation files or activation keys.

If uninstalled licenses or expired licenses exist on the device, the compression operation will make the DID change. Before performing a compression, make sure all licenses registered with the old DID have been installed. You will be unable to install such licenses after the compression.

This command clears invalid licenses (expired licenses and uninstalled licenses) and Uninstall keys from the license storage area. Back up the Uninstall keys before you compress the license storage.

Examples

# Compress the license storage on the specified slot.

<Sysname> system-view

[Sysname] license compress slot 1

This command will delete all data relevant to uninstalled and expired keys/licenses, including Uninstall keys, and create a new device ID for activation keys/files. Make sure you have saved the Uninstall keys so you can apply for a new activation key/file for the unexpired licenses that were covered by the uninstalled activation keys/files.

Are you sure you want to continue? [Y/N]: Y

This operation might take some time. Do not perform any other operations until the operation is completed or a failure message is displayed. Please wait...