Contents

HH3C-LAG-MIB· 1

About this MIB· 1

MIB file name· 1

Root object 1

Scalar objects· 1

hh3cAggResourceAllocationValue· 1

Tabular objects· 1

hh3cAggLinkTable· 1

hh3cAggPortTable· 3

Notifications· 4

hh3cAggPortInactiveNotification· 4

hh3cAggPortInactiveNotification2· 5

hh3cAggPortActiveNotification· 5

HH3C-LAG-MIB

About this MIB

This MIB contains information in ieee8023-lag.mib and hh3c-lag.mib.

MIB file name

hh3c-lag.mib

Root object

iso(1).org(3).dod(6).internet(1).private(4).enterprises(1).hh3c(25506).hh3cRhw(8).hh3cLAG(25)

Scalar objects

hh3cAggResourceAllocationValue

Object (OID)	Access	Syntax	Value range	Description	Implementation
hh3cAggResourceAllocationValue (1.3.6.1.4.1.25506.8.25.1.3)	read-only	Octets	OCTET STRING (1)	Whether link aggregation is implemented by Huawei or H3C.	As per the MIB.

Tabular objects

hh3cAggLinkTable

About this table

This table contains aggregation group information.

Support for operations

Create	Edit/Modify	Delete	Read
Supported	Supported	Supported	Supported

Columns

The table index is hh3cAggLinkNumber.

Object (OID)	Access	Syntax	Value range	Description	Implementation
hh3cAggLinkNumber (1.3.6.1.4.1.25506.8.25.1.1.1.1)	not-accessible	Integer32	Standard MIB values.	Aggregation group ID.	As per the MIB.
hh3cAggLinkName (1.3.6.1.4.1.25506.8.25.1.1.1.2)	read-create	DisplayString	SIZE (0..32)	Aggregation group name.	Not supported
hh3cAggLinkMode (1.3.6.1.4.1.25506.8.25.1.1.1.3)	read-create	INTEGER	manual(1) static(2) dynamic(3)	Aggregation mode.	Supports only 2 and 3.
hh3cAggLinkPortList (1.3.6.1.4.1.25506.8.25.1.1.1.4)	read-create	PortList	OCTET STRING (0..255)	Aggregation member ports.	As per the MIB.
hh3cAggLinkState (1.3.6.1.4.1.25506.8.25.1.1.1.5)	read-create	RowStatus	Standard MIB values.	Row status.	Supports only active(1), createAndGo(4), and destroy(6).
hh3cAggPortListSelectedPorts (1.3.6.1.4.1.25506.8.25.1.1.1.6)	read-only	PortList	OCTET STRING (0..255)	Selected member ports.	As per the MIB.
hh3cAggPortListSamePartnerPorts (1.3.6.1.4.1.25506.8.25.1.1.1.7)	read-only	PortList	OCTET STRING (0..255)	Member ports attached to the same peer.	As per the MIB.

 

A value of the PortList type specifies a list of ports in the format of an octet string. Each octet specifies eight ports. Within each octet, the most significant bit represents the lowest-numbered port, and the least significate bit represents the highest-numbered port. Thus, each port of the device is represented by a single bit within the value of this object. If that bit has a value of 1, then that port is included in the set of ports. The port is not included if its bit has a value of 0.

Example:

hh3cAggLinkPortList.1 (PortList) 00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.34 (hex)

Hexadecimal string 00 indicates that no ports are included in an octet. The last octet is 34 in hexadecimal format and 00110100 in binary format. Therefore, the following ports are included in the list:

Port 307 (38 × 8 + 3 = 307, where 38 is the number of times that hexadecimal string 00 appears.)

Port 308 (38 × 8 + 4 = 308)

Port 310 (38 × 8 + 6 = 310)

 

To view the member ports of an aggregate interface:

1.     Check the hh3cAggLinkPortList object in the hh3cAggLinkTable table to obtain the member port list.

¡     For a Layer 2 aggregate interface, this object is suffixed with the aggregate interface ID. For example, hh3cAggLinkPortList.3 lists the member ports of Bridge-Aggregation 3.

¡     For a Layer 3 aggregate interface, this object is suffixed with the sum of the aggregate interface ID and 16384. For example, hh3cAggLinkPortList.16387 lists the member ports of Route-Aggregation 3.

2.     Calculate the logical ID of each member port based on the value of the hh3cAggLinkPortList object.

3.     Check the dot1dBasePortIfIndex object in the dot1dBasePortTable table for the ifindex value mapped to the logical ID of each member port.

4.     Check the ifXTable table for the interface name mapped to each ifindex value.

 

Example:

The value of the hh3cAggLinkTable object is as follows:

11:hh3cAggLinkPortList.16387(PortList)00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.80.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.40 (hex)

The following member ports are included in the list:

Port 409 (51 × 8 + 1= 409, where 51 is the number of times that hexadecimal string 00 appears.)

Port 2690 (336 × 8 + 2= 2690)

The value of the dot1dBasePortIfIndex object is as follows:

127:dot1dBasePortIfIndex.409(INTEGER) 385

234:dot1dBasePortIfIndex.2690 (INTEGER) 2690

The ifindex value of port 409 is 385, and the ifindex value of port 2690 is 2690.

The value of the ifXTable table is as follows:

177:ifName.9173 (DisplayString) Route-Aggregation3[52.6F.75.74.65.2D.41.67.67.72.65.67.61.74.69.6F.6E.33 (hex)]

5:ifName.385(DisplayString) GigabitEthernet1/4/2/1[47.69.67.61.62.69.74.45.74.68.65.72.6E.65.74.31.2F.34.2F.32.2F.31 (hex)]

112:ifName.2690(DisplayString) GigabitEthernet2/5/1/2[47.69.67.61.62.69.74.45.74.68.65.72.6E.65.74.32.2F.35.2F.31.2F.32 (hex)]

Therefore, the interface name is GigabitEthernet 1/4/2/1 for port 409 and GigabitEthernet 2/5/1/2 for port 2690.

On the device, the ports are as follows:

[H3C]dislink-aggregation verbose Route-Aggregation 3

AggregateInterface: Route-Aggregation3

AggregationMode: Static

LoadsharingType: Shar

  Port             Status  Priority Oper-Key

  GE1/4/2/1        S       32768    2

  GE2/5/1/2        S       32768    2

[H3C]

 

hh3cAggPortTable

About this table

This table contains aggregation member port information.

Support for operations

Create	Edit/Modify	Delete	Read
Not supported	Supported	Not supported	Supported

Columns

The table index is hh3cAggPortIndex.

Object (OID)	Access	Syntax	Value range	Description	Implementation
hh3cAggPortIndex (1.3.6.1.4.1.25506.8.25.1.2.1.1)	not-accessible	Gauge32	Standard MIB values.	Member port index.	As per the MIB.
hh3cAggPortNotAttachedReason (1.3.6.1.4.1.25506.8.25.1.2.1.2)	read-write	Integer32	0..10	Why the port is unselected.	Read-only.
hh3cAggPortLacpState (1.3.6.1.4.1.25506.8.25.1.2.1.3)	read-write	TruthValue	true(1) false(2)	Status of LACP.	Read-only.
hh3cAggPortNotAttachedString (1.3.6.1.4.1.25506.8.25.1.2.1.4)	read-write	DisplayString	SIZE (0..255)	Detailed cause for the unselected state of the member port.	Read-only.

 

Notifications

hh3cAggPortInactiveNotification

Basic information

OID	Event	Type	Severity	Recovery notification	Default status
1.3.6.1.4.1.25506.8.25.2.2	An aggregation member port becomes unselected.	Informational	Warning	-	ON

 

Description

This notification is generated when an aggregation member port becomes unselected.

Status control

This notification cannot be disabled.

Objects

OID (object name)	Description	Index	Type	Value range
1.3.6.1.4.1.25506.8.25.1.1.1.1 (hh3cAggLinkNumber)	Aggregation group ID.	Yes	Integer32	1..40960

 

Recommended action

1.     Verify that the aggregation member port is physically up.

2.     Verify that the attribute configuration of the aggregation member port is the same as that of the aggregate interface.

3.     Repeat step 1 and step 2 on the peer port if the aggregate interface operates in dynamic mode.

4.     If the issue persists, contact H3C Support.

hh3cAggPortInactiveNotification2

Basic information

OID	Event	Type	Severity	Recovery notification	Default status
1.3.6.1.4.1.25506.8.25.2.2.3	An aggregation member port becomes unselected.	Informational	Warning	-	ON

 

Description

This notification is generated when an aggregation member port becomes unselected.

Status control

This notification cannot be disabled.

Objects

OID (object name)	Description	Index	Type	Value range
1.3.6.1.4.1.25506.8.25.1.1.1.1 (hh3cAggLinkNumber)	Aggregation group ID.	Yes	Integer32	1..40960
1.3.6.1.4.1.25506.8.25.1.2.1.1 (hh3cAggPortIndex)	Aggregation member port index.	No	Integer32	As per the MIB.

 

Recommended action

1.     Verify that the aggregation member port is physically up.

2.     Verify that the attribute configuration of the aggregation member port is the same as that of the aggregate interface.

3.     Repeat step 1 and step 2 on the peer port if the aggregate interface operates in dynamic mode.

4.     If the issue persists, contact H3C Support.

 

hh3cAggPortActiveNotification

Basic information

OID	Event	Type	Severity	Recovery notification	Default status
1.3.6.1.4.1.25506.8.25.2.2.4	An aggregation member port becomes selected.	Informational	Warning	-	ON

 

Description

This notification is generated when an aggregation member port becomes selected.

Status control

This notification cannot be disabled.

Objects

OID (object name)	Description	Index	Type	Value range
1.3.6.1.4.1.25506.8.25.1.1.1.1 (hh3cAggLinkNumber)	Aggregation group ID.	Yes	Integer32	1..40960
1.3.6.1.4.1.25506.8.25.1.2.1.1 (hh3cAggPortIndex)	Aggregation member port index.	No	Integer32	As per the MIB.

 

Recommended action

No action is required.