Login
- Table of Contents
-
- H3C SecPath Security Products FAQ(V7)-6W100
- 00-Preface
- 01-System management and maintenance FAQ
- 02-Device forwarding FAQ
- 03-License management FAQ
- 04-RBM-based hot backup FAQ
- 05-NAT FAQ
- 06-User access and authentication FAQ
- 07-Attack detection and prevention FAQ
- 08-IPS FAQ
- 09-Anti-virus FAQ
- 10-URL filtering FAQ
- 11-File filtering FAQ
- 12-Bandwidth management FAQ
- 13-SSL VPN FAQ
- 14-IPsec FAQ
- 15-Load balancing FAQ
- 16-Mirroring FAQ
- 17-IRF FAQ
- 18-Security policy FAQ
- 19-Security zone FAQ
- 20-ASPF FAQ
- 21-PKI FAQ
- 22-APR FAQ
- 23-DPI FAQ
- 24-Application audit and management FAQ
- 25-Data filtering FAQ
- 26-Data analysis center FAQ
- 27-WAF FAQ
- 28-AFT FAQ
- 29-SSL decryption FAQ
- 30-NetShare control FAQ
- 31-FAQ on Intranet security comprehensive scoring (Security overview)
- 32-Web operations FAQ
- Related Documents
-
01-System management and maintenance FAQ
System management and maintenance FAQ
Q. How can I clear a Telnet connection?
A. Use the free user-interface vty number command in user view to release the connection established on the specified user interface VTY.
Q. Can a Telnet user's username contain an at sign (@)?
A. The username of a Telnet user configured on the device cannot contain an at sign (@).
Q. Can the management Ethernet interface come up even if no IP address is configured for the interface?
A. The management Ethernet interface can be up as long as connections have been established on Layer 2. The software on the device has implemented traffic limit to prevent system malfunction caused by packet bursts.
不同款型规格的资料略有差异, 详细信息请向具体销售和400咨询。 H3C保留在没有任何通知或提示的情况下对资料内容进行修改的权利!
