Object (OID)	Access	Syntax	Value range	Description	Implementation
ospfRouterId (1.3.6.1.2.1.14.1.1)	read-write	RouterID	OCTET STRING (4)	Router ID that uniquely identifies a router in an AS.	Supports only the read operation.

ospfAdminStat

Object (OID)

Access

Syntax

Value range

Description

Implementation

ospfAdminStat (1.3.6.1.2.1.14.1.2)

read-write

Status

INTEGER{

enabled(1), disabled(2)

}

OSPF administrative state of the router. Enabled indicates at least one OSPF interface exists. Disabled indicates no OSPF interface exists.

Supports only the read operation.

ospfVersionNumber

Object (OID)	Access	Syntax	Value range	Description	Implementation
ospfVersionNumber (1.3.6.1.2.1.14.1.3)	read-only	INTEGER	version2 (2)	Version number (2).	As per the MIB.

ospfAreaBdrRtrStatus

Object (OID)

Access

Syntax

Value range

Description

Implementation

ospfAreaBdrRtrStatus (1.3.6.1.2.1.14.1.4)

read-only

TruthValue

true(1),

false(2)

Whether the router is an ABR.

As per the MIB.

ospfASBdrRtrStatus

Object (OID)

Access

Syntax

Value range

Description

Implementation

ospfASBdrRtrStatus (1.3.6.1.2.1.14.1.5)

read-write

TruthValue

true(1),

false(2)

Whether the router is an ASBR.

Supports only the read operation.

ospfExternLsaCount

Object (OID)	Access	Syntax	Value range	Description	Implementation
ospfExternLsaCount (1.3.6.1.2.1.14.1.6)	read-only	Gauge32	INTEGER(0..4294967295)	Number of Type-5 LSAs.	As per the MIB.

ospfExternLsaCksumSum

Object (OID)	Access	Syntax	Value range	Description	Implementation
ospfExternLsaCksumSum (1.3.6.1.2.1.14.1.7)	read-only	Integer32	Standard MIB values.	Sum of checksums in Type-5 LSAs.	As per the MIB.

ospfTOSSupport

Object (OID)

Access

Syntax

Value range

Description

Implementation

ospfTOSSupport (1.3.6.1.2.1.14.1.8)

read-write

TruthValue

true(1),

false(2)

Whether ToS is supported.

Supports only the read operation.

ospfOriginateNewLsas

Object (OID)	Access	Syntax	Value range	Description	Implementation
ospfOriginateNewLsas (1.3.6.1.2.1.14.1.9)	read-only	Counter32	INTEGER(0..4294967295)	Number of new LSAs that have been originated. This number is incremented each time the router originates a new LSA.	As per the MIB.

ospfRxNewLsas

Object (OID)	Access	Syntax	Value range	Description	Implementation
ospfRxNewLsas (1.3.6.1.2.1.14.1.10)	read-only	Counter32	INTEGER(0..4294967295)	Number of newly received LSAs, excluding self-originated LSAs.	As per the MIB.

ospfExtLsdbLimit

Object (OID)	Access	Syntax	Value range	Description	Implementation
ospfExtLsdbLimit (1.3.6.1.2.1.14.1.11)	read-write	Integer32	Integer32(-1..'7FFFFFFF'h)	Maximum number of non-default ASEs in the LSDB. A value of -1 indicates no limit.	The value takes -1, or is in the range of 1 to 1000000.

ospfMulticastExtensions

Object (OID)	Access	Syntax	Value range	Description	Implementation
ospfMulticastExtensions (1.3.6.1.2.1.14.1.12)	read-write	Integer32	Standard MIB values.	Whether the router is multicast capable. Bit 0 indicates intra-area multicast; bit 1 indicates inter-area multicast; bit 2 indicates inter-AS multicast. The value can be 0, 1, 3, 5, and 7. The default value is 0.	Supports only the read operation.

ospfExitOverflowInterval

Object (OID)	Access	Syntax	Value range	Description	Implementation
ospfExitOverflowInterval (1.3.6.1.2.1.14.1.13)	read-write	PositiveInteger	Integer32(0..'7FFFFFFF'h)	Time that the router takes to leave the OverflowState. 0 indicates the router does not leave the OverflowState until it is restarted.	As per the MIB.

ospfDemandExtensions

Object (OID)

Access

Syntax

Value range

Description

Implementation

ospfDemandExtensions (1.3.6.1.2.1.14.1.14)

read-write

TruthValue

true(1),

false(2)

Support for demand routing.

Supports only the read operation.

ospfRFC1583Compatibility

Object (OID)

Access

Syntax

Value range

Description

Implementation

ospfRFC1583Compatibility

(1.3.6.1.2.1.14.1.15)

read-write

TruthValue

true(1),

false(2)

Compatibility with RFC 1583.

When compatibility is enabled, only cost will be used when choosing among multiple ASE LSAs advertising the same destination.

When compatibility is disabled, preference will be used first.

As per the MIB.

ospfOpaqueLsaSupport

Object (OID)

Access

Syntax

Value range

Description

Implementation

ospfOpaqueLsaSupport

(1.3.6.1.2.1.14.1.16)

read-only

TruthValue

true(1),

false(2)

Support for Opaque LSAs.

As per the MIB.

ospfReferenceBandwidth

Object (OID)

Access

Syntax

Value range

Description

Implementation

ospfReferenceBandwidth

(1.3.6.1.2.1.14.1.17)

read-write

Unsigned32

Standard MIB values.

Reference bandwidth in Kb/s for calculating the interface cost.

When the value is divided by 1000, the decimal number will be ignored.

ospfRestartSupport

Object (OID)

Access

Syntax

Value range

Description

Implementation

ospfRestartSupport

(1.3.6.1.2.1.14.1.18)

read-write

INTEGER

none (1),

plannedOnly (2),

plannedAndUnplanned (3)

Support for GR.

If the value changes from 1 to 2 or 3, IETF GR is supported.

If the value changes between 2 and 3, the original GR type remains unchanged.

ospfRestartInterval

Object (OID)

Access

Syntax

Value range

Description

Implementation

ospfRestartInterval

(1.3.6.1.2.1.14.1.19)

read-write

Integer32

Integer32(1..1800)

Graceful restart timeout interval.

Value range: 40 to 1800.

ospfRestartStrictLsaChecking

Object (OID)

Access

Syntax

Value range

Description

Implementation

ospfRestartStrictLsaChecking

(1.3.6.1.2.1.14.1.20)

read-write

TruthValue

true(1),

false(2)

Whether the strict LSA checking capability is enabled for GR.

As per the MIB.

ospfRestartStatus

Object (OID)

Access

Syntax

Value range

Description

Implementation

ospfRestartStatus

(1.3.6.1.2.1.14.1.21)

read-only

INTEGER

notRestarting (1),

plannedRestart (2),

unplannedRestart (3)

Graceful restart state.

As per the MIB.

ospfRestartAge

Object (OID)

Access

Syntax

Value range

Description

Implementation

ospfRestartAge

(1.3.6.1.2.1.14.1.22)

read-only

Unsigned32

Standard MIB values.

Remaining time for the current graceful restart

As per the MIB.

ospfRestartExitReason

Object (OID)

Access

Syntax

Value range

Description

Implementation

ospfRestartExitReason

(1.3.6.1.2.1.14.1.23)

read-only

INTEGER

none (1),

inProgress (2),

completed (3),

timedOut (4),

topologyChanged (5)

GR exit reason.

As per the MIB.

ospfAsLsaCount

Object (OID)

Access

Syntax

Value range

Description

Implementation

ospfAsLsaCount

(1.3.6.1.2.1.14.1.24)

read-only

Gauge32

INTEGER(0..4294967295)

Number of AS-scope LSAs.

As per the MIB.

ospfAsLsaCksumSum

Object (OID)

Access

Syntax

Value range

Description

Implementation

ospfAsLsaCksumSum

(1.3.6.1.2.1.14.1.25)

read-only

Unsigned32

Standard MIB values.

Sum of AS-scope LSA checksums.

As per the MIB.

ospfStubRouterSupport

Object (OID)

Access

Syntax

Value range

Description

Implementation

ospfStubRouterSupport

(1.3.6.1.2.1.14.1.26)

read-only

TruthValue

true(1),

false(2)

Support for stub router.

As per the MIB.

ospfStubRouterAdvertisement

Object (OID)

Access

Syntax

Value range

Description

Implementation

ospfStubRouterAdvertisement(1.3.6.1.2.1.14.1.27)

read-write

INTEGER

doNotAdvertise (1),

advertise(2)

Whether to advertise stub router LSAs.

As per the MIB.

ospfDiscontinuityTime

Object (OID)

Access

Syntax

Value range

Description

Implementation

ospfDiscontinuityTime

(1.3.6.1.2.1.14.1.28)

read-only

TimeStamp

TimeTicks

Most recent system startup time.

As per the MIB.

Tabular objects

ospfAreaTable

About this table

This table contains parameter and statistics information about each area on the device.

Support for operations

Create	Edit/Modify	Delete	Read
Not supported	Supported	Not supported	Supported

Columns

The table index is ospfAreaId.

Object (OID)	Access	Syntax	Value range	Description	Implementation
ospfAreaId (1.3.6.1.2.1.14.2.1.1)	read-only	AreaID	OCTET STRING (4)	Area ID, a 32-bit integer that uniquely identifies an area.	As per the MIB.
ospfAuthType (1.3.6.1.2.1.14.2.1.2)	read-create	OspfAuthenticationType	none (0), simplePassword (1), md5 (2)	Authentication type.	Supports only the read operation.
ospfImportAsExtern (1.3.6.1.2.1.14.2.1.3)	read-create	INTEGER	importExternal(1), importNoExternal (2), importNssa (3)	Area type, stub, NSSA, or common area.	Supports only the read operation.
ospfSpfRuns (1.3.6.1.2.1.14.2.1.4)	read-only	Counter32	INTEGER(0..4294967295)	Time of route calculations in the area.	As per the MIB.
ospfAreaBdrRtrCount (1.3.6.1.2.1.14.2.1.5)	read-only	Gauge32	INTEGER(0..4294967295)	Number of reachable ABRs in the area.	As per the MIB.
ospfAsBdrRtrCount (1.3.6.1.2.1.14.2.1.6)	read-only	Gauge32	INTEGER(0..4294967295)	Number of reachable ASBRs in the area.	As per the MIB.
ospfAreaLsaCount (1.3.6.1.2.1.14.2.1.7)	read-only	Gauge32	INTEGER(0..4294967295)	Number of LSAs in the LSDB of the area.	As per the MIB.
ospfAreaLsaCksumSum (1.3.6.1.2.1.14.2.1.8)	read-only	Integer32	Standard MIB values.	Sum of the checksums of the LSAs in the area.	As per the MIB.
ospfAreaSummary (1.3.6.1.2.1.14.2.1.9)	read-create	INTEGER	noAreaSummary (1), sendAreaSummary (2)	Whether to send summary LSAs to stub and NSSA areas.	Supports only the read and write operations.
ospfAreaStatus (1.3.6.1.2.1.14.2.1.10)	read-create	RowStatus	active(1), notInService(2), notReady(3), createAndGo(4), createAndWait(5), destroy(6)	Area state.	Supports only the read operation.
ospfAreaNssaTranslatorRole (1.3.6.1.2.1.14.2.1.11)	read-create	INTEGER	always (1), candidate (2)	Ability of the NSSA ABR to translate Type-7 LSAs into Type-5 LSAs.	Supports only the read and write operations.
ospfAreaNssaTranslatorState (1.3.6.1.2.1.14.2.1.12)	read-only	INTEGER	enabled (1), elected (2), disabled (3)	Method for the NSSA ABR to become capable of translating Type-7 LSAs into Type-5 LSAs.	As per the MIB.
ospfAreaNssaTranslatorStabilityInterval(1.3.6.1.2.1.14.2.1.13)	read-create	PositiveInteger	Integer32(0..'7FFFFFFF'h)	Time for the elected translator to continue to perform translation.	Supports only the read and write operations. Value range: 0 to 900.
ospfAreaNssaTranslatorEvents (1.3.6.1.2.1.14.2.1.14)	read-only	Counter32	INTEGER(0..4294967295)	Number of translator state changes.	As per the MIB.

ospfStubAreaTable

About this table

This table contains cost information that is advertised to a stub area.

Support for operations

Create	Edit/Modify	Delete	Read
Not supported	Supported	Not supported	Supported

Columns

The table indexes are ospfStubAreaId and ospfStubTOS.

Object (OID)	Access	Syntax	Value range	Description	Implementation
ospfStubAreaId (1.3.6.1.2.1.14.3.1.1)	read-only	AreaID	OCTET STRING (4)	Area ID, a 32-bit integer that uniquely identifies a stub area.	As per the MIB.
ospfStubTOS (1.3.6.1.2.1.14.3.1.2)	read-only	TOSType	Integer32 (0..30)	Type of Service associated with the cost.	As per the MIB.
ospfStubMetric (1.3.6.1.2.1.14.3.1.3)	read-create	BigMetric	Integer32(0..'FFFFFF'h)	Default cost of generated default LSAs, including Type-3 and Type-7 LSAs.	Supports only the read and write operations. Value range: 0 to 16777214.
ospfStubStatus (1.3.6.1.2.1.14.3.1.4)	read-create	RowStatus	active(1), notInService(2), notReady(3), createAndGo(4), createAndWait(5), destroy(6)	Area state.	Supports only the read operation.
ospfStubMetricType (1.3.6.1.2.1.14.3.1.5)	read-create	INTEGER	ospfMetric (1), comparableCost (2), nonComparable (3)	Cost type.	Supports only the read operation.

ospfLsdbTable

About this table

This table contains OSPF LSDB information.

Support for operations

Create	Edit/Modify	Delete	Read
Not supported	Not supported	Not supported	Supported

Columns

The table indexes are ospfLsdbAreaId, ospfLsdbType, ospfLsdbLsid, and ospfLsdbRouterId.

Object (OID)	Access	Syntax	Value range	Description	Implementation
ospfLsdbAreaId (1.3.6.1.2.1.14.4.1.1)	read-only	AreaID	OCTET STRING (4)	ID of the area from which the LSA was received.	As per the MIB.
ospfLsdbType (1.3.6.1.2.1.14.4.1.2)	read-only	INTEGER	routerLink (1), networkLink (2), summaryLink (3), asSummaryLink (4), asExternalLink (5), multicastLink (6), nssaExternalLink (7), areaOpaqueLink (10)	LSA type. Type-5 LSAs are not displayed.	As per the MIB.
ospfLsdbLsid (1.3.6.1.2.1.14.4.1.3)	read-only	IpAddress	OCTET STRING (4)	LS ID	As per the MIB.
ospfLsdbRouterId (1.3.6.1.2.1.14.4.1.4)	read-only	RouterID	OCTET STRING (4)	Router ID of the LSA originator.	As per the MIB.
ospfLsdbSequence (1.3.6.1.2.1.14.4.1.5)	read-only	Integer32	Standard MIB values.	LSA sequence number.	As per the MIB.
ospfLsdbAge (1.3.6.1.2.1.14.4.1.6)	read-only	Integer32	Standard MIB values.	LSA age.	As per the MIB.
ospfLsdbChecksum (1.3.6.1.2.1.14.4.1.7)	read-only	Integer32	Standard MIB values.	Checksum of the complete contents of the LSA except the age field.	As per the MIB.
ospfLsdbAdvertisement (1.3.6.1.2.1.14.4.1.8)	read-only	OCTET STRING	OCTET STRING (1..65535)	Complete LSA information, including the LSA header.	As per the MIB.

ospfHostTable

About this table

This table contains host route information on the device.

Support for operations

Create	Edit/Modify	Delete	Read
Not supported	Supported	Not supported	Supported

Columns

The table indexes are ospfHostIpAddress and ospfHostTOS.

Object (OID)	Access	Syntax	Value range	Description	Implementation
ospfHostIpAddress (1.3.6.1.2.1.14.6.1.1)	read-only	IpAddress	OCTET STRING (4)	IP address of the host route.	As per the MIB.
ospfHostTOS (1.3.6.1.2.1.14.6.1.2)	read-only	TOSType	Integer32 (0..30)	Type of Service.	As per the MIB.
ospfHostMetric (1.3.6.1.2.1.14.6.1.3)	read-create	Metric	Integer32(0..'FFFF'h)	Host route cost.	Supports only the read and write operations. Value range: 1 to 65535.
ospfHostStatus (1.3.6.1.2.1.14.6.1.4)	read-create	RowStatus	active(1), notInService(2), notReady(3), createAndGo(4), createAndWait(5), destroy(6)	Host route state.	Supports only the read operation.
ospfHostAreaID (1.3.6.1.2.1.14.6.1.5)	read-only	AreaID	OCTET STRING (4)	ID of the area to which the host route belongs.	As per the MIB.
ospfHostCfgAreaID (1.3.6.1.2.1.14.6.1.6)	read-create	AreaID	OCTET STRING (4)	Configured area ID of the host route.	Supports only the read operation.

ospfIfTable

About this table

This table contains OSPF interface information.

Support for operations

Create	Edit/Modify	Delete	Read
Not supported	Supported	Not supported	Supported

Columns

The table indexes are ospfIfIpAddress and ospfAddressLessIf.

Object (OID)	Access	Syntax	Value range	Description	Implementation
ospfIfIpAddress (1.3.6.1.2.1.14.7.1.1)	read-only	IpAddress	OCTET STRING (4)	Interface IP address.	As per the MIB.
ospfAddressLessIf (1.3.6.1.2.1.14.7.1.2)	read-only	InterfaceIndexOrZero	Integer32(0..2147483647)	Used to distinguish interface instances with addresses configured and those without addresses configured.	As per the MIB.
ospfIfAreaId (1.3.6.1.2.1.14.7.1.3)	read-create	AreaID	OCTET STRING (4)	Area ID.	Supports only the read operation.
ospfIfType (1.3.6.1.2.1.14.7.1.4)	read-create	INTEGER	broadcast(1), nbma (2), pointToPoint (3), pointToMultipoint (5)	OSPF interface type.	Supports only the read and write operations. Loopback interfaces do not support the write operation.
ospfIfAdminStat (1.3.6.1.2.1.14.7.1.5)	read-create	Status	INTEGER{ enabled(1), disabled(2) }	Administrative state of the OSPF interface. It is enabled when the interface is active and disabled when the interface is in other state.	Supports only the read operation.
ospfIfRtrPriority (1.3.6.1.2.1.14.7.1.6)	read-create	DesignatedRouterPriority	Integer32(0..'FF'h)	Interface priority.	Supports only the read and write operations. Loopback interfaces do not support the write operation.
ospfIfTransitDelay (1.3.6.1.2.1.14.7.1.7)	read-create	UpToMaxAge	Integer32(0..3600)	Delay time interval.	Supports only the read and write operations. Value range: 1 to 3600. Loopback interfaces do not support the write operation.
ospfIfRetransInterval (1.3.6.1.2.1.14.7.1.8)	read-create	UpToMaxAge	Integer32(0..3600)	Retransmission interval.	Supports only the read and write operations. Value range: 1 to 3600. Loopback interfaces do not support the write operation.
ospfIfHelloInterval (1.3.6.1.2.1.14.7.1.9)	read-create	HelloRange	Integer32(1..'FFFF'h)	Hello interval.	Supports only the read and write operations. Loopback interfaces do not support the write operation.
ospfIfRtrDeadInterval (1.3.6.1.2.1.14.7.1.10)	read-create	PositiveInteger	Integer32(0..'7FFFFFFF'h)	Dead interval.	Supports only the read and write operations. Value range: 1 to 2147483647. Loopback interfaces do not support the write operation.
ospfIfPollInterval (1.3.6.1.2.1.14.7.1.11)	read-create	PositiveInteger	Integer32(0..'7FFFFFFF'h)	Poll interval.	Supports only the read and write operations. Value range: 1 to 2147483647. Loopback interfaces do not support the write operation.
ospfIfState (1.3.6.1.2.1.14.7.1.12)	read-only	INTEGER	down (1), loopback(2), waiting(3), pointToPoint (4), designatedRouter(5), backupDesignatedRouter (6), otherDesignatedRouter (7)	Interface state.	As per the MIB.
ospfIfDesignatedRouter (1.3.6.1.2.1.14.7.1.13)	read-only	IpAddress	OCTET STRING (4)	DR address.	As per the MIB.
ospfIfBackupDesignatedRouter (1.3.6.1.2.1.14.7.1.14)	read-only	IpAddress	OCTET STRING (4)	BDR address.	As per the MIB.
ospfIfEvents (1.3.6.1.2.1.14.7.1.15)	read-only	Counter32	INTEGER(0..4294967295)	Number of interface state changes.	As per the MIB.
ospfIfAuthKey (1.3.6.1.2.1.14.7.1.16)	read-create	OCTET STRING	OCTET STRING (0..256)	Authentication key.	Supports only the read operation.
ospfIfStatus (1.3.6.1.2.1.14.7.1.17)	read-create	RowStatus	active(1), notInService(2), notReady(3), createAndGo(4), createAndWait(5), destroy(6)	Row status.	Supports only the read operation.
ospfIfMulticastForwarding (1.3.6.1.2.1.14.7.1.18)	read-create	INTEGER	blocked(1), multicast(2), unicast (3)	Multicast forwarding way on the interface.	Supports only the read operation.
ospfIfDemand (1.3.6.1.2.1.14.7.1.19)	read-create	TruthValue	true(1), false(2)	Whether the interface performs demand routing.	Supports only the read operation.
ospfIfAuthType (1.3.6.1.2.1.14.7.1.20)	read-create	OspfAuthenticationType	none (0), simplePassword (1), md5 (2)	Authentication type.	Supports only the read operation.
ospfIfLsaCount (1.3.6.1.2.1.14.7.1.21)	read-only	Gauge32	INTEGER(0..4294967295)	Number of Type-9 LSAs.	As per the MIB.
ospfIfLsaCksumSum (1.3.6.1.2.1.14.7.1.22)	read-only	Unsigned32	INTEGER(0..4294967295)	Sum of checksums in Type-9 LSAs.	As per the MIB.
ospfIfDesignatedRouterId (1.3.6.1.2.1.14.7.1.23)	read-only	RouterID	OCTET STRING (4)	Router ID of the DR.	As per the MIB.
ospfIfBackupDesignatedRouterId(1.3.6.1.2.1.14.7.1.24)	read-only	RouterID	OCTET STRING (4)	Router ID of the BDR.	As per the MIB.

ospfIfMetricTable

About this table

This table contains information about costs to be advertised for a specific interface at various service types.

Support for operations

Create	Edit/Modify	Delete	Read
Not supported	Supported	Not supported	Supported

Columns

The table indexes are ospfIfMetricIpAddress and ospfIfMetricAddressLessIf.

Object (OID)	Access	Syntax	Value range	Description	Implementation
ospfIfMetricIpAddress (1.3.6.1.2.1.14.8.1.1)	read-only	IpAddress	OCTET STRING (4)	IP address of the OSPF interface.	As per the MIB.
ospfIfMetricAddressLessIf (1.3.6.1.2.1.14.8.1.2)	read-only	InterfaceIndexOrZero	Integer32(0..2147483647)	Used to distinguish interface instances with addresses configured and those without addresses configured.	As per the MIB.
ospfIfMetricTOS (1.3.6.1.2.1.14.8.1.3)	read-only	TOSType	Integer32 (0..30)	ToS cost being used.	As per the MIB.
ospfIfMetricValue (1.3.6.1.2.1.14.8.1.4)	read-create	Metric	Integer32(0..'FFFF'h)	Interface cost.	Supports only the read and write operations. Value range for a loopback interface: 0 to 65535. Value range for other interfaces: 1 to 65535.
ospfIfMetricStatus (1.3.6.1.2.1.14.8.1.5)	read-create	RowStatus	active(1), notInService(2), notReady(3), createAndGo(4), createAndWait(5), destroy(6)	Row status.	Supports only the read operation.

ospfVirtIfTable

About this table

This table contains OSPF virtual interface information of the router.

Support for operations

Create	Edit/Modify	Delete	Read
Not supported	Supported	Not supported	Supported

Columns

The table indexes are ospfVirtIfAreaId and ospfVirtIfNeighbor.

Object (OID)	Access	Syntax	Value range	Description	Implementation
ospfVirtIfAreaId (1.3.6.1.2.1.14.9.1.1)	read-only	AreaID	OCTET STRING (4)	ID of the area to which the virtual link belongs.	As per the MIB.
ospfVirtIfNeighbor (1.3.6.1.2.1.14.9.1.2)	read-only	RouterID	OCTET STRING (4)	Router ID of the virtual neighbor.	As per the MIB.
ospfVirtIfTransitDelay (1.3.6.1.2.1.14.9.1.3)	read-create	UpToMaxAge	Integer32(0..3600)	Delay interval.	Supports only the read and write operations. Value range: 1 to 3600.
ospfVirtIfRetransInterval (1.3.6.1.2.1.14.9.1.4)	read-create	UpToMaxAge	Integer32(0..3600)	Retransmission interval.	Supports only the read and write operations. Value range: 1 to 3600.
ospfVirtIfHelloInterval (1.3.6.1.2.1.14.9.1.5)	read-create	HelloRange	Integer32(1..'FFFF'h)	Hello interval.	Supports only the read and write operations. Value range: 1 to 8192.
ospfVirtIfRtrDeadInterval (1.3.6.1.2.1.14.9.1.6)	read-create	PositiveInteger	Integer32(0..'7FFFFFFF'h)	Dead interval.	Supports only the read and write operations. Value range: 1 to 32768.
ospfVirtIfState (1.3.6.1.2.1.14.9.1.7)	read-only	INTEGER	down (1), pointToPoint (4)	OSPF virtual interface state.	As per the MIB.
ospfVirtIfEvents (1.3.6.1.2.1.14.9.1.8)	read-only	Counter32	INTEGER(0..4294967295)	Number of state changes on the interface.	As per the MIB.
ospfVirtIfAuthKey (1.3.6.1.2.1.14.9.1.9)	read-create	OCTET STRING	OCTET STRING (0..256)	Authentication key.	Supports only the read operation.
ospfVirtIfStatus (1.3.6.1.2.1.14.9.1.10)	read-create	RowStatus	active(1), notInService(2), notReady(3), createAndGo(4), createAndWait(5), destroy(6)	Row status.	Supports only the read operation.
ospfVirtIfAuthType (1.3.6.1.2.1.14.9.1.11)	read-create	OspfAuthenticationType	none (0), simplePassword (1), md5 (2)	Authentication type.	Supports only the read operation.
ospfVirtIfLsaCount (1.3.6.1.2.1.14.9.1.12)	read-only	Gauge32	INTEGER(0..4294967295)	Number of Type-9 LSAs.	As per the MIB.
ospfVirtIfLsaCksumSum (1.3.6.1.2.1.14.9.1.13)	read-only	Unsigned32	Standard MIB values.	Sum of checksums in Type-9 LSAs.	As per the MIB.

ospfNbrTable

About this table

This table contains information about non-virtual neighbors of the local OSPF router.

Support for operations

Create	Edit/Modify	Delete	Read
Not supported	Supported	Not supported	Supported

Columns

The table indexes are ospfNbrIpAddr and ospfNbrAddressLessIndex.

Object (OID)	Access	Syntax	Value range	Description	Implementation
ospfNbrIpAddr (1.3.6.1.2.1.14.10.1.1)	read-only	IpAddress	OCTET STRING (4)	Neighbor IP address.	As per the MIB.
ospfNbrAddressLessIndex (1.3.6.1.2.1.14.10.1.2)	read-only	InterfaceIndexOrZero	Integer32(0..2147483647)	Set to 0 on an interface having an IP address, and set to the value of interface index in the Internet Standard MIB on an interface having no IP address.	As per the MIB.
ospfNbrRtrId (1.3.6.1.2.1.14.10.1.3)	read-only	RouterID	OCTET STRING (4)	Router ID of the neighbor.	As per the MIB.
ospfNbrOptions (1.3.6.1.2.1.14.10.1.4)	read-only	Integer32	Standard MIB values.	Option field of the neighbor.	As per the MIB.
ospfNbrPriority (1.3.6.1.2.1.14.10.1.5)	read-create	DesignatedRouterPriority	Integer32(0..'FF'h)	Priority of the neighbor.	Supports only the read and write operations. NBMA neighbors support only the write operations.
ospfNbrState (1.3.6.1.2.1.14.10.1.6)	read-only	INTEGER	down (1), attempt (2), init (3), twoWay (4), exchangeStart (5), exchange (6), loading (7), full (8)	State of the relationship with the neighbor.	As per the MIB.
ospfNbrEvents (1.3.6.1.2.1.14.10.1.7)	read-only	Counter32	INTEGER(0..4294967295)	Number of neighbor state changes.	As per the MIB.
ospfNbrLsRetransQLen (1.3.6.1.2.1.14.10.1.8)	read-only	Gauge32	INTEGER(0..4294967295)	Retransmission queue length.	As per the MIB.
ospfNbmaNbrStatus (1.3.6.1.2.1.14.10.1.9)	read-create	RowStatus	active(1), notInService(2), notReady(3), createAndGo(4), createAndWait(5), destroy(6)	Row status.	Supports only the read operation.
ospfNbmaNbrPermanence (1.3.6.1.2.1.14.10.1.10)	read-only	INTEGER	dynamic(1), permanent(2)	Entry status. The values dynamic and permanent refer to how the neighbor became known.	As per the MIB.
ospfNbrHelloSuppressed (1.3.6.1.2.1.14.10.1.11)	read-only	TruthValue	true(1), false(2)	Whether hello packets are being suppressed to the neighbor.	As per the MIB.
ospfNbrRestartHelperStatus (1.3.6.1.2.1.14.10.1.12)	read-only	INTEGER	notHelping(1), helping (2)	Whether the router is acting as a GR helper for the neighbor.	As per the MIB.
ospfNbrRestartHelperAge (1.3.6.1.2.1.14.10.1.13)	read-only	Unsigned32	Standard MIB values.	Remaining time of the GR interval when the router is acting as a GR helper for the neighbor.	As per the MIB.
ospfNbrRestartHelperExitReason(1.3.6.1.2.1.14.10.1.14)	read-only	INTEGER	none (1),inProgress (2),completed (3),timedOut (4),topologyChanged (5)	GR helper exit reason.	As per the MIB.

ospfVirtNbrTable

About this table

This table contains information about all virtual neighbors.

Support for operations

Create	Edit/Modify	Delete	Read
Not supported	Not supported	Not supported	Supported

Columns

The table indexes are ospfVirtNbrArea and ospfVirtNbrRtrId.

Object (OID)	Access	Syntax	Value range	Description	Implementation
ospfVirtNbrArea (1.3.6.1.2.1.14.11.1.1)	read-only	AreaID	OCTET STRING (4)	Transit area identifier.	As per the MIB.
ospfVirtNbrRtrId (1.3.6.1.2.1.14.11.1.2)	read-only	RouterID	OCTET STRING (4)	A 32-bit integer that uniquely identifies the neighboring router in the AS.	As per the MIB.
ospfVirtNbrIpAddr (1.3.6.1.2.1.14.11.1.3)	read-only	IpAddress	OCTET STRING (4)	IP address of the virtual neighbor.	As per the MIB.
ospfVirtNbrOptions (1.3.6.1.2.1.14.11.1.4)	read-only	Integer32	Standard MIB values.	Option field of the neighbor.	As per the MIB.
ospfVirtNbrState (1.3.6.1.2.1.14.11.1.5)	read-only	INTEGER	down (1), attempt (2), init (3), twoWay (4), exchangeStart (5), exchange (6), loading (7), full (8)	State of the virtual neighbor relationship.	As per the MIB.
ospfVirtNbrEvents (1.3.6.1.2.1.14.11.1.6)	read-only	Counter32	INTEGER(0..4294967295)	Number of virtual link state changes.	As per the MIB.
ospfVirtNbrLsRetransQLen (1.3.6.1.2.1.14.11.1.7)	read-only	Gauge32	INTEGER(0..4294967295)	Retransmission queue length.	As per the MIB.
ospfVirtNbrHelloSuppressed (1.3.6.1.2.1.14.11.1.8)	read-only	TruthValue	true(1), false(2)	Whether hello packets are being suppressed to the neighbor.	As per the MIB.
ospfVirtNbrRestartHelperStatus (1.3.6.1.2.1.14.11.1.9)	read-only	INTEGER	notHelping(1), helping (2)	Whether the router is acting as a GR helper for the neighbor.	As per the MIB.
ospfVirtNbrRestartHelperAge(1.3.6.1.2.1.14.11.1.10)	read-only	Unsigned32	Standard MIB values.	Remaining time of the GR interval when the router is acting as a GR helper for the neighbor.	As per the MIB.
ospfVirtNbrRestartHelperExitReason (1.3.6.1.2.1.14.11.1.11)	read-only	INTEGER	none(1), inProgress(2), completed (3), timedOut (4), topologyChanged (5)	GR helper exit reason.	As per the MIB.

ospfExtLsdbTable

About this table

This table contains information about the LSDB of external LSAs for the OSPF process.

Support for operations

Create	Edit/Modify	Delete	Read
Not supported	Not supported	Not supported	Supported

Columns

The table indexes are ospfExtLsdbType, ospfExtLsdbLsid, and ospfExtLsdbRouterId.

Object (OID)	Access	Syntax	Value range	Description	Implementation
ospfExtLsdbType (1.3.6.1.2.1.14.12.1.1)	read-only	INTEGER	asExternalLink(5)	LSA type.	As per the MIB.
ospfExtLsdbLsid (1.3.6.1.2.1.14.12.1.2)	read-only	IpAddress	OCTET STRING (4)	LS ID, an LS type specific field containing either a router ID or an IP address.	As per the MIB.
ospfExtLsdbRouterId (1.3.6.1.2.1.14.12.1.3)	read-only	RouterID	OCTET STRING (4)	A 32-bit number that uniquely identifies the originating router in the AS.	As per the MIB.
ospfExtLsdbSequence (1.3.6.1.2.1.14.12.1.4)	read-only	Integer32	Standard MIB values.	Sequence number.	As per the MIB.
ospfExtLsdbAge (1.3.6.1.2.1.14.12.1.5)	read-only	Integer32	Standard MIB values.	Age of the LSA.	As per the MIB.
ospfExtLsdbChecksum (1.3.6.1.2.1.14.12.1.6)	read-only	Integer32	Standard MIB values.	Checksum of the complete contents of the LSA, except the age field.	As per the MIB.
ospfExtLsdbAdvertisement (1.3.6.1.2.1.14.12.1.7)	read-only	OCTET STRING	OCTET STRING (36)	Complete LSA information.	As per the MIB.

ospfAreaAggregateTable

About this table

This table contains information about configured summary routes.

Support for operations

Create	Edit/Modify	Delete	Read
Not supported	Supported	Not supported	Supported

Columns

The table indexes are ospfAreaAggregateAreaID, ospfAreaAggregateLsdbType, ospfAreaAggregateNet, and ospfAreaAggregateMask.

Object (OID)	Access	Syntax	Value range	Description	Implementation
ospfAreaAggregateAreaID (1.3.6.1.2.1.14.14.1.1)	read-only	AreaID	OCTET STRING (4)	Area where the summary route resides.	As per the MIB.
ospfAreaAggregateLsdbType (1.3.6.1.2.1.14.14.1.2)	read-only	INTEGER	summaryLink(3), nssaExternalLink (7)	Summary route type.	As per the MIB.
ospfAreaAggregateNet (1.3.6.1.2.1.14.14.1.3)	read-only	IpAddress	OCTET STRING (4)	Network address.	As per the MIB.
ospfAreaAggregateMask (1.3.6.1.2.1.14.14.1.4)	read-only	IpAddress	OCTET STRING (4)	Subnet mask.	As per the MIB.
ospfAreaAggregateStatus (1.3.6.1.2.1.14.14.1.5)	read-create	RowStatus	active(1), notInService(2), notReady(3), createAndGo(4), createAndWait(5), destroy(6)	Row status.	Supports only the read operation.
ospfAreaAggregateEffect (1.3.6.1.2.1.14.14.1.6)	read-create	INTEGER	advertiseMatching (1), doNotAdvertiseMatching (2)	Whether subnets are included in the summary route.	Supports only the read and write operations.
ospfAreaAggregateExtRouteTag(1.3.6.1.2.1.14.14.1.7)	read-create	Unsigned32	INTEGER(0..4294967295)	External route tag in Type-7 LSAs.	Supports only the read and write operations. nssaExternalLink supports only the write operation.

ospfLocalLsdbTable

About this table

This table contains all local LSDB information.

Support for operations

Create	Edit/Modify	Delete	Read
Not supported	Not supported	Not supported	Supported

Columns

The table indexes are ospfLocalLsdbIpAddress, ospfLocalLsdbAddressLessIf, ospfLocalLsdbType, ospfLocalLsdbLsid, and ospfLocalLsdbRouterId.

Object (OID)	Access	Syntax	Value range	Description	Implementation
ospfLocalLsdbIpAddress (1.3.6.1.2.1.14.17.1.1)	not-accessible	IpAddress	OCTET STRING (4)	IP address of the interface that received the LSA.	As per the MIB.
ospfLocalLsdbAddressLessIf (1.3.6.1.2.1.14.17.1.2)	not-accessible	InterfaceIndexOrZero	Integer32(0..2147483647)	Index of the interface that received the LSA.	As per the MIB.
ospfLocalLsdbType (1.3.6.1.2.1.14.17.1.3)	not-accessible	INTEGER	localOpaqueLink (9)	LSA type.	As per the MIB.
ospfLocalLsdbLsid (1.3.6.1.2.1.14.17.1.4)	not-accessible	IpAddress	OCTET STRING (4)	LS ID.	As per the MIB.
ospfLocalLsdbRouterId (1.3.6.1.2.1.14.17.1.5)	not-accessible	RouterID	OCTET STRING (4)	A 32-bit number that uniquely identifies the originating router in the AS.	As per the MIB.
ospfLocalLsdbSequence (1.3.6.1.2.1.14.17.1.6)	read-only	Integer32	Standard MIB values.	LSA sequence number.	As per the MIB.
ospfLocalLsdbAge (1.3.6.1.2.1.14.17.1.7)	read-only	Integer32	Standard MIB values.	LSA age in seconds.	As per the MIB.
ospfLocalLsdbChecksum (1.3.6.1.2.1.14.17.1.8)	read-only	Integer32	Standard MIB values.	LSA checksum.	As per the MIB.
ospfLocalLsdbAdvertisement (1.3.6.1.2.1.14.17.1.9)	read-only	OCTET STRING	OCTET STRING (1..65535)	Complete LSA information.	As per the MIB.

ospfVirtLocalLsdbTable

About this table

This table contains local LSDB information for all virtual links.

Support for operations

Create	Edit/Modify	Delete	Read
Not supported	Not supported	Not supported	Supported

Columns

The table indexes are ospfVirtLocalLsdbTransitArea, ospfVirtLocalLsdbNeighbor, ospfVirtLocalLsdbType, ospfVirtLocalLsdbLsid, and ospfVirtLocalLsdbRouterId.

Object (OID)	Access	Syntax	Value range	Description	Implementation
ospfVirtLocalLsdbTransitArea (1.3.6.1.2.1.14.18.1.1)	not-accessible	AreaID	OCTET STRING (4)	Transit area that the virtual link traverses.	As per the MIB.
ospfVirtLocalLsdbNeighbor (1.3.6.1.2.1.14.18.1.2)	not-accessible	RouterID	OCTET STRING (4)	Router ID of the virtual neighbor.	As per the MIB.
ospfVirtLocalLsdbType (1.3.6.1.2.1.14.18.1.3)	not-accessible	INTEGER	localOpaqueLink (9)	LSA type.	As per the MIB.
ospfVirtLocalLsdbLsid (1.3.6.1.2.1.14.18.1.4)	not-accessible	IpAddress	OCTET STRING (4)	LS ID.	As per the MIB.
ospfVirtLocalLsdbRouterId (1.3.6.1.2.1.14.18.1.5)	not-accessible	RouterID	OCTET STRING (4)	A 32-bit number that uniquely identifies the originating router in the AS.	As per the MIB.
ospfVirtLocalLsdbSequence (1.3.6.1.2.1.14.18.1.6)	read-only	Integer32	Standard MIB values.	LSA sequence number.	As per the MIB.
ospfVirtLocalLsdbAge (1.3.6.1.2.1.14.18.1.7)	read-only	Integer32	Standard MIB values.	LSA age in seconds.	As per the MIB.
ospfVirtLocalLsdbChecksum (1.3.6.1.2.1.14.18.1.8)	read-only	Integer32	Standard MIB values.	LSA checksum.	As per the MIB.
ospfVirtLocalLsdbAdvertisement (1.3.6.1.2.1.14.18.1.9)	read-only	OCTET STRING	OCTET STRING (1..65535)	Complete LSA information.	As per the MIB.

ospfAsLsdbTable

About this table

This table contains information about LSDB information of an AS.

Support for operations

Create	Edit/Modify	Delete	Read
Not supported	Not supported	Not supported	Supported

Columns

The table indexes are ospfAsLsdbType, ospfAsLsdbLsid, and ospfAsLsdbRouterId.

Object (OID)	Access	Syntax	Value range	Description	Implementation
ospfAsLsdbType (1.3.6.1.2.1.14.19.1.1)	not-accessible	INTEGER	asExternalLink (5), asOpaqueLink (11)	LSA type.	As per the MIB.
ospfAsLsdbLsid (1.3.6.1.2.1.14.19.1.2)	not-accessible	IpAddress	OCTET STRING (4)	LS ID.	As per the MIB.
ospfAsLsdbRouterId (1.3.6.1.2.1.14.19.1.3)	not-accessible	RouterID	OCTET STRING (4)	A 32-bit number that uniquely identifies the originating router in the AS.	As per the MIB.
ospfAsLsdbSequence (1.3.6.1.2.1.14.19.1.4)	read-only	Integer32	Standard MIB values.	LSA sequence number.	As per the MIB.
ospfAsLsdbAge (1.3.6.1.2.1.14.19.1.5)	read-only	Integer32	Standard MIB values.	LSA age in seconds.	As per the MIB.
ospfAsLsdbChecksum (1.3.6.1.2.1.14.19.1.6)	read-only	Integer32	Standard MIB values.	LSA checksum.	As per the MIB.
ospfAsLsdbAdvertisement (1.3.6.1.2.1.14.19.1.7)	read-only	OCTET STRING	OCTET STRING (1..65535)	Complete LSA information.	As per the MIB.

ospfAreaLsaCountTable

About this table

This table contains LSA statistics information of all areas and types.

Support for operations

Create	Edit/Modify	Delete	Read
Not supported	Not supported	Not supported	Supported

Columns

The table indexes are ospfAreaLsaCountAreaId and ospfAreaLsaCountLsaType.

Object (OID)	Access	Syntax	Value range	Description	Implementation
ospfAreaLsaCountAreaId (1.3.6.1.2.1.14.20.1.1)	not-accessible	AreaID	OCTET STRING (4)	Area ID.	As per the MIB.
ospfAreaLsaCountLsaType (1.3.6.1.2.1.14.20.1.2)	not-accessible	INTEGER	routerLink (1), networkLink (2), summaryLink (3), asSummaryLink (4), multicastLink (6), nssaExternalLink (7), areaOpaqueLink (10)	LSA type.	As per the MIB.
ospfAreaLsaCountNumber (1.3.6.1.2.1.14.20.1.3)	read-only	Gauge32	INTEGER(0..4294967295)	Number of LSAs of the specified type in the specified area.	As per the MIB.

08-Layer 3 - IP Routing

About this table

Support for operations

Columns

About this table

Support for operations

Columns

About this table

Support for operations

Columns

About this table

Support for operations

Columns

About this table

Support for operations

Columns

About this table

Support for operations

Columns

About this table

Support for operations

Columns

About this table

Support for operations

Columns

About this table

Support for operations

Columns

About this table

Support for operations

Columns

About this table

Support for operations

Columns

About this table

Support for operations

Columns

About this table

Support for operations

Columns

About this table

Support for operations

Columns

About this table

Support for operations

Columns

Intelligent Terminal Products

Product Support Services

Technical Service Solutions

Resource Center

Policy

Online Help

Become a Partner

Partner Policy & Program

Global Learning

Partner Sales Resources

Service Business

News & Events

Contact Us