Login
- Table of Contents
- Related Documents
-
| Title | Size | Download |
|---|---|---|
| 04-HH3C-IF-EXT-MIB | 305.39 KB |
Contents
hh3cIfMonInputErrorAlarmRising
hh3cIfMonInputErrorAlarmResume
hh3cIfMonOutputErrorAlarmRising
HH3C-IF-EXT-MIB
About this MIB
Use this MIB to manage and describe interfaces.
MIB file name
hh3c-if-ext.mib
Root object
iso(1).org(3).dod(6).internet(1).private(4).enterprises(1).hh3c(25506).hh3cCommon(2).hh3cIfExt(40)
Scalar objects
hh3cIfStatGlobalFlowInterval
|
Object (OID) |
Access |
Syntax |
Value range |
Description |
Implementation |
|
hh3cIfStatGlobalFlowInterval (1.3.6.1.4.1.25506.2.40.1.1) |
read-write |
Integer32 |
Integer32(0..2147483647) |
Global statistics polling interval. 0 indicates the traffic statistics collection feature is disabled. |
Not supported |
hh3cIfShutDownInterval
|
Object (OID) |
Access |
Syntax |
Value range |
Description |
Implementation |
|
hh3cIfShutDownInterval (1.3.6.1.4.1.25506.2.40.1.2) |
read-write |
Integer32 |
Integer32(1..2147483647) |
Port status detection timer. |
0..300 |
hh3cIfPhysicalNumber
|
Object (OID) |
Access |
Syntax |
Value range |
Description |
Implementation |
|
hh3cIfPhysicalNumber (1.3.6.1.4.1.25506.2.40.2.3.1) |
read-only |
Integer32 |
Integer32(1..2147483647) |
Number of physical interfaces on the device. |
As per the MIB. |
Tabular objects
hh3cIfFlowStatTable
About this table
Use this table to obtain the interface traffic information.
Support for operations
|
Create |
Edit/Modify |
Delete |
Read |
|
Not supported |
Not supported |
Not supported |
Supported |
Columns
The table index is hh3cIfStatFlowInterval.
|
Object (OID) |
Access |
Syntax |
Value range |
Description |
Implementation |
|
hh3cIfStatFlowInterval (1.3.6.1.4.1.25506.2.40.2.1.2.1.1.1) |
read-write |
Integer32 |
Integer32(1..2147483647) |
Traffic statistics polling interval. |
Supported. |
|
hh3cIfStatFlowInBits (1.3.6.1.4.1.25506.2.40.2.1.2.1.1.2) |
read-only |
Unsigned32 |
Unsigned32 (0..4294967295) |
Incoming traffic in bits. |
As per the MIB. |
|
hh3cIfStatFlowOutBits (1.3.6.1.4.1.25506.2.40.2.1.2.1.1.3) |
read-only |
Unsigned32 |
Unsigned32 (0..4294967295) |
Outgoing traffic in bits. |
As per the MIB. |
|
hh3cIfStatFlowInPkts (1.3.6.1.4.1.25506.2.40.2.1.2.1.1.4) |
read-only |
Unsigned32 |
Unsigned32 (0..4294967295) |
Incoming traffic in packets. |
As per the MIB. |
|
hh3cIfStatFlowOutPkts (1.3.6.1.4.1.25506.2.40.2.1.2.1.1.5) |
read-only |
Unsigned32 |
Unsigned32 (0..4294967295) |
Outgoing traffic in packets. |
As per the MIB. |
|
hh3cIfStatFlowInBytes (1.3.6.1.4.1.25506.2.40.2.1.2.1.1.6) |
read-only |
Unsigned32 |
Unsigned32 (0..4294967295) |
Incoming traffic in bytes. |
As per the MIB. |
|
hh3cIfStatFlowOutBytes (1.3.6.1.4.1.25506.2.40.2.1.2.1.1.7) |
read-only |
Unsigned32 |
Unsigned32 (0..4294967295) |
Outgoing traffic in bytes. |
As per the MIB. |
hh3cIfSpeedStatTable
About this table
Use this table to obtain the interface traffic speed statistics.
Support for operations
|
Create |
Edit/Modify |
Delete |
Read |
|
Not supported |
Not supported |
Not supported |
Supported |
Columns
The table index is hh3cIfSpeedStatInterval.
|
Object (OID) |
Access |
Syntax |
Value range |
Description |
Implementation |
|
hh3cIfSpeedStatInterval (1.3.6.1.4.1.25506.2.40.2.1.2.2.1.1) |
read-only |
Integer32 |
Integer32(1..2147483647) |
Interface traffic speed statistics polling interval. 0 indicates the interface traffic speed statistics collection feature is disabled. |
Supported. |
|
hh3cIfSpeedStatInPkts (1.3.6.1.4.1.25506.2.40.2.1.2.2.1.2) |
read-only |
Unsigned32 |
Unsigned32 (0..4294967295) |
Average incoming traffic speed (in pps) of the interface within the specified interval before the latest sampling point. The interval is specified by h3cIfSpeedStatInterval. |
As per the MIB. |
|
hh3cIfSpeedStatOutPkts (1.3.6.1.4.1.25506.2.40.2.1.2.2.1.3) |
read-only |
Unsigned32 |
Unsigned32 (0..4294967295) |
Average outgoing traffic speed (in pps) of the interface within the specified interval before the latest sampling point. The interval is specified by h3cIfSpeedStatInterval. |
As per the MIB. |
|
hh3cIfSpeedStatInBytes (1.3.6.1.4.1.25506.2.40.2.1.2.2.1.4) |
read-only |
Unsigned32 |
Unsigned32 (0..4294967295) |
Average incoming traffic speed (in Bps) of the interface within the specified interval before the latest sampling point. The interval is specified by h3cIfSpeedStatInterval. |
As per the MIB. |
|
hh3cIfSpeedStatOutBytes (1.3.6.1.4.1.25506.2.40.2.1.2.2.1.5) |
read-only |
Unsigned32 |
Unsigned32 (0..4294967295) |
Average outgoing traffic speed (in Bps) of the interface within the specified interval before the latest sampling point. The interval is specified by h3cIfSpeedStatInterval. |
As per the MIB. |
|
hh3cIfSpeedStatInBits (1.3.6.1.4.1.25506.2.40.2.1.2.2.1.6) |
read-only |
Unsigned32 |
Unsigned32 (0..4294967295) |
Average of input bits per second (32-bit). |
As per the MIB. |
|
hh3cIfSpeedStatOutBits (1.3.6.1.4.1.25506.2.40.2.1.2.2.1.7) |
read-only |
Unsigned32 |
Unsigned32 (0..4294967295) |
Average of output bits per second (32-bit). |
As per the MIB. |
hh3cIfHCFlowStatTable
About this table
Use this table to obtain the 64-bit traffic information of interfaces.
Support for operations
|
Create |
Edit/Modify |
Delete |
Read |
|
Not supported |
Not supported |
Not supported |
Supported |
Columns
The table index is hh3cIfStatFlowHCInBits.
|
Object (OID) |
Access |
Syntax |
Value range |
Description |
Implementation |
|
hh3cIfStatFlowHCInBits (1.3.6.1.4.1.25506.2.40.2.1.2.3.1.1) |
read-only |
CounterBasedGauge64 |
Counter64 (0..18446744073709551615) |
Incoming traffic in bits (64-bit version). |
As per the MIB. |
|
hh3cIfStatFlowHCOutBits (1.3.6.1.4.1.25506.2.40.2.1.2.3.1.2) |
read-only |
CounterBasedGauge64 |
Counter64 (0..18446744073709551615) |
Outgoing traffic in bits (64-bit version). |
As per the MIB. |
|
hh3cIfStatFlowHCInPkts (1.3.6.1.4.1.25506.2.40.2.1.2.3.1.3) |
read-only |
CounterBasedGauge64 |
Counter64 (0..18446744073709551615) |
Incoming traffic in packets (64-bit version). |
As per the MIB. |
|
hh3cIfStatFlowHCOutPkts (1.3.6.1.4.1.25506.2.40.2.1.2.3.1.4) |
read-only |
CounterBasedGauge64 |
Counter64 (0..18446744073709551615) |
Outgoing traffic in packets (64-bit version). |
As per the MIB. |
|
hh3cIfStatFlowHCInBytes (1.3.6.1.4.1.25506.2.40.2.1.2.3.1.5) |
read-only |
CounterBasedGauge64 |
Counter64 (0..18446744073709551615) |
Incoming traffic in bytes (64-bit version). |
As per the MIB. |
|
hh3cIfStatFlowHCOutBytes (1.3.6.1.4.1.25506.2.40.2.1.2.3.1.6) |
read-only |
CounterBasedGauge64 |
Counter64 (0..18446744073709551615) |
Outgoing traffic in bytes (64-bit version). |
As per the MIB. |
hh3cRTParentIfTable
About this table
Use this table to obtain main interface information of subinterfaces.
Support for operations
|
Create |
Edit/Modify |
Delete |
Read |
|
Not supported |
Not supported |
Not supported |
Supported |
Columns
The table index is hh3cRTParentIfIndex.
|
Object (OID) |
Access |
Syntax |
Value range |
Description |
Implementation |
|
hh3cRTParentIfIndex (1.3.6.1.4.1.25506.2.40.2.2.1.1.1) |
not-accessible |
Integer32 |
Integer32(1..2147483647) |
Main interface index. Index of the interface for which you can create subinterfaces. |
As per the MIB. |
|
hh3cRTMinSubIfOrdinal (1.3.6.1.4.1.25506.2.40.2.2.1.1.2) |
read-only |
Integer32 |
Integer32(1..2147483647) |
Minimum number of the subinterface that can be created. |
As per the MIB. |
|
hh3cRTMaxSubIfOrdinal (1.3.6.1.4.1.25506.2.40.2.2.1.1.3) |
read-only |
Integer32 |
Integer32(1..2147483647) |
Maximum number of the subinterface that can be created. |
As per the MIB. |
hh3cRTSubIfTable
About this table
Use this table to obtain information about subinterface information of main interfaces.
Support for operations
|
Create |
Edit/Modify |
Delete |
Read |
|
Not supported |
Not supported |
Not supported |
Supported |
Columns
The table index is hh3cRTSubIfParentIfIndex.
|
Object (OID) |
Access |
Syntax |
Value range |
Description |
Implementation |
|
hh3cRTSubIfParentIfIndex (1.3.6.1.4.1.25506.2.40.2.2.2.1.1) |
not-accessible |
Integer32 |
Integer32(1..2147483647) |
Main interface index. |
As per the MIB. |
|
hh3cRTSubIfOrdinal (1.3.6.1.4.1.25506.2.40.2.2.2.1.2) |
not-accessible |
Integer32 |
Integer32(1..2147483647) |
Subinterface number. |
As per the MIB. |
|
hh3cRTSubIfSubIfIndex (1.3.6.1.4.1.25506.2.40.2.2.2.1.3) |
read-only |
Integer32 |
Integer32(1..2147483647) |
Subinterface index. |
As per the MIB. |
|
hh3cRTSubIfSubIfDesc (1.3.6.1.4.1.25506.2.40.2.2.2.1.4) |
read-only |
DisplayString |
OCTET STRING(0..255) |
Subinterface description. |
As per the MIB. |
|
hh3cRTSubIfRowStatus (1.3.6.1.4.1.25506.2.40.2.2.2.1.5) |
read-create |
RowStatus |
active(1), notInService(2), notReady(3), createAndGo(4), createAndWait(5), destroy(6) |
Subinterface state. |
Available values are active(1), createAndGo(4), and destroy(6). |
hh3cIfLinkModeTable
About this table
Use this table to obtain the interface link mode.
Support for operations
|
Create |
Edit/Modify |
Delete |
Read |
|
Not supported |
Not supported |
Not supported |
Supported |
Columns
The table index is hh3cIfLinkModeIndex.
|
Object (OID) |
Access |
Syntax |
Value range |
Description |
Implementation |
|
hh3cIfLinkModeIndex (1.3.6.1.4.1.25506.2.40.2.2.3.1.1) |
not-accessible |
Integer32 |
1..2147483647 |
Link mode index. |
As per the MIB. |
|
hh3cIfLinkMode (1.3.6.1.4.1.25506.2.40.2.2.3.1.2) |
read-write |
INTEGER |
bridgeMode(1), routeMode(2) |
Current link mode of the interface. |
As per the MIB. |
|
hh3cIfLinkModeSwitchSupport (1.3.6.1.4.1.25506.2.40.2.2.3.1.3) |
read-only |
TruthValue |
true(1), false(2) |
Whether the link mode of the interface can be switched. |
As per the MIB. |
hh3cIfPortTypeTable
About this table
Use this table to obtain the port type of an interface.
Support for operations
|
Create |
Edit/Modify |
Delete |
Read |
|
Not supported |
Not supported |
Not supported |
Supported |
Columns
The table index is hh3cIfPortTypeIndex.
|
Object (OID) |
Access |
Syntax |
Value range |
Description |
Implementation |
|
hh3cIfPortTypeIndex (1.3.6.1.4.1.25506.2.40.2.2.4.1.1) |
not-accessible |
Integer32 |
Integer32(1..2147483647) |
Interface index, which is the same as ifIndex in ifTable. |
As per the MIB. |
|
hh3cIfPortType (1.3.6.1.4.1.25506.2.40.2.2.4.1.2) |
read-write |
INTEGER |
other(1),ethernet(2),fc(3)
|
Ethernet/ FC mode of an interface. |
As per the MIB. |
hh3cIfTable
About this table
Use this table to obtain interface-related information.
Support for operations
|
Create |
Edit/Modify |
Delete |
Read |
|
Not supported |
Not supported |
Not supported |
Supported |
Columns
The table index is hh3cIfUpDownTimes.
|
Object (OID) |
Access |
Syntax |
Value range |
Description |
Implementation |
|
hh3cIfUpDownTimes (1.3.6.1.4.1.25506.2.40.2.3.2.1.1) |
read-only |
Integer32 |
Integer32(1..2147483647) |
Number of interface up/down events. |
As per the MIB. |
|
hh3cIfMtu (1.3.6.1.4.1.25506.2.40.2.3.2.1.2) |
read-write |
Integer32 |
Integer32(1..2147483647) |
Interface MTU. |
As per the MIB. |
|
hh3cIfBandwidthRate (1.3.6.1.4.1.25506.2.40.2.3.2.1.3) |
accessible-for-notify |
Integer32 |
Integer32(1..2147483647) |
Interface bandwidth. |
Not supported |
|
hh3cIfDiscardPktRate (1.3.6.1.4.1.25506.2.40.2.3.2.1.4) |
accessible-for-notify |
Integer32 |
Integer32(1..2147483647) |
Packet loss rate of an interface. |
Not supported |
|
hh3cIfStatusKeepTime (1.3.6.1.4.1.25506.2.40.2.3.2.1.5) |
read-only |
TimeTicks |
TimeTicks (0..4294967295) |
Duration of the current interface state. |
As per the MIB. |
|
hh3cIfInNUcastPkts (1.3.6.1.4.1.25506.2.40.2.3.2.1.6) |
read-only |
Integer32 |
Integer32(1..2147483647) |
Number of incoming non-unicast packets. |
Not supported |
|
hh3cIfOutNUcastPkts (1.3.6.1.4.1.25506.2.40.2.3.2.1.7) |
read-only |
Integer32 |
Integer32(1..2147483647) |
Number of outgoing non-unicast packets. |
Not supported |
|
hh3cIfIsPoe (1.3.6.1.4.1.25506.2.40.2.3.2.1.8) |
read-only |
TruthValue |
true(1), false(2) |
Support for PoE on an interface. |
Not supported |
|
hh3cIfOperStatus (1.3.6.1.4.1.25506.2.40.2.3.2.1.9) |
read-only |
INTEGER |
up(1), down(2), testing(3), admindown(4) |
Operational state of an interface. |
Not supported |
|
hh3cIfDownTimes (1.3.6.1.4.1.25506.2.40.2.3.2.1.10) |
read-only |
Integer32 |
Integer32(1..2147483647) |
Number of link-down events. |
Not supported |
|
hh3cIfPfcStatus (1.3.6.1.4.1.25506.2.40.2.3.2.1.11) |
read-write |
INTEGER |
enable(1), disable(2), auto(3)
|
PFC mode of an interface. |
Supported. |
|
hh3cIfPfcDot1pNoDrop (1.3.6.1.4.1.25506.2.40.2.3.2.1.12) |
read-write |
BITS |
pri0(0), pri1(1), pri2(2), pri3(3), pri4(4), pri5(5), pri6(6), pri7(7) |
802.1p priority list for PFC on an interface. |
Supported. |
|
hh3cIfDescription (1.3.6.1.4.1.25506.2.40.2.3.2.1.13) |
read-write |
DisplayString |
OCTET STRING(0..255) |
Description of an interface. |
As per the MIB. |
|
hh3cIfFwdErrDiscards (1.3.6.1.4.1.25506.2.40.2.3.2.1.14) |
read-only |
Unsigned32 |
Unsigned32 (0..4294967295) |
Number of packets dropped because of forwarding entry errors on an interface. |
Supported. |
hh3cIfUsingTable
About this table
Use this table to obtain information about breakout interfaces.
Support for operations
|
Create |
Edit/Modify |
Delete |
Read |
|
Not supported |
Not supported |
Not supported |
Supported |
Columns
The table index is hh3cIfUsingIndex.
|
Object (OID) |
Access |
Syntax |
Value range |
Description |
Implementation |
|
hh3cIfUsingIndex (1.3.6.1.4.1.25506.2.40.2.3.4.1) |
not-accessible |
Integer32 |
Integer32(1..2147483647) |
Index of an interface that can be split or combined. |
As per the MIB. |
|
hh3cIfUsingSupportType (1.3.6.1.4.1.25506.2.40.2.3.4.2) |
read-only |
Integer32 |
Integer32(1..2147483647) |
Interface type that an interface can be split or combined into. |
As per the MIB. |
|
hh3cIfUsingType (1.3.6.1.4.1.25506.2.40.2.3.4.3) |
read-write |
INTEGER |
noUsing(0), using10GE(1), using20GE(2), using40GE(3), using100GE(4), using25GE(5), using50GE(6) |
Interface type that an interface will be split or combined into. |
As per the MIB. |
|
hh3cIfUsingStatus (1.3.6.1.4.1.25506.2.40.2.3.4.4) |
read-only |
INTEGER |
noUsing(0), needReboot(1) |
State of the splitting or combining operation. |
As per the MIB. |
hh3cIfQueBufferTable
About this table
Use this table to obtain the interface buffer information.
Support for operations
|
Create |
Edit/Modify |
Delete |
Read |
|
Not supported |
Not supported |
Not supported |
Supported |
Columns
The table index is hh3cIfQueId.
|
Object (OID) |
Access |
Syntax |
Value range |
Description |
Implementation |
|
hh3cIfQueId (1.3.6.1.4.1.25506.2.40.2.2.6.1.1) |
read-only |
INTEGER |
que0(1), que1(2), que2(3), que3(4), que4(5), que5(6), que6(7), que7(8) |
ID of an interface buffer queue. |
As per the MIB. |
|
hh3cIfQueOutUcastTotal (1.3.6.1.4.1.25506.2.40.2.2.6.1.2) |
read-only |
Unsigned32 |
Unsigned32 (0..4294967295) |
Total buffer of an outbound unicast queue. |
As per the MIB. |
|
hh3cIfQueOutUcastFree (1.3.6.1.4.1.25506.2.40.2.2.6.1.3) |
read-only |
Unsigned32 |
Unsigned32 (0..4294967295) |
Available buffer of an outbound unicast queue. |
As per the MIB. |
|
hh3cIfQueOutUcastUsedRatio (1.3.6.1.4.1.25506.2.40.2.2.6.1.4) |
read-only |
Unsigned32 |
Unsigned32 (0..4294967295) |
Buffer usage of an outbound unicast queue. |
As per the MIB. |
|
hh3cIfQueOutUcastUsedPeak (1.3.6.1.4.1.25506.2.40.2.2.6.1.5) |
read-only |
Unsigned32 |
Unsigned32 (0..4294967295) |
Peak buffer usage of an outbound unicast queue. |
As per the MIB. |
|
hh3cIfQueOutUcastThreshold (1.3.6.1.4.1.25506.2.40.2.2.6.1.6) |
read-only |
Unsigned32 |
Unsigned32 (0..4294967295) |
Buffer alarm threshold of an outbound unicast queue. |
As per the MIB. |
|
hh3cIfQueOutUcastOverThres (1.3.6.1.4.1.25506.2.40.2.2.6.1.7) |
read-only |
Unsigned32 |
Unsigned32 (0..4294967295) |
Number of buffer usage alarms of an outbound unicast queue. |
As per the MIB. |
|
hh3cIfQueInTotal (1.3.6.1.4.1.25506.2.40.2.2.6.1.8) |
read-only |
Unsigned32 |
Unsigned32 (0..4294967295) |
Total buffer of an inbound unicast queue. |
As per the MIB. |
|
hh3cIfQueInFree (1.3.6.1.4.1.25506.2.40.2.2.6.1.9) |
read-only |
Unsigned32 |
Unsigned32 (0..4294967295) |
Available buffer of an inbound unicast queue. |
As per the MIB. |
|
hh3cIfQueInUsedRatio (1.3.6.1.4.1.25506.2.40.2.2.6.1.10) |
read-only |
Unsigned32 |
Unsigned32 (0..4294967295) |
Buffer usage of an inbound unicast queue. |
As per the MIB. |
|
hh3cIfQueInUsedPeak (1.3.6.1.4.1.25506.2.40.2.2.6.1.11) |
read-only |
Unsigned32 |
Unsigned32 (0..4294967295) |
Peak buffer usage of an inbound unicast queue. |
As per the MIB. |
|
hh3cIfQueInThreshold (1.3.6.1.4.1.25506.2.40.2.2.6.1.12) |
read-only |
Unsigned32 |
Unsigned32 (0..4294967295) |
Buffer alarm threshold of an inbound unicast queue. |
As per the MIB. |
|
hh3cIfQueInOverThres (1.3.6.1.4.1.25506.2.40.2.2.6.1.13) |
read-only |
Unsigned32 |
Unsigned32 (0..4294967295) |
Number of buffer usage alarms of an inbound unicast queue. |
As per the MIB. |
|
hh3cIfQueInHeadRoomTotal (1.3.6.1.4.1.25506.2.40.2.2.6.1.14) |
read-only |
Unsigned32 |
Unsigned32 (0..4294967295) |
Total headroom of an inbound queue. |
As per the MIB. |
|
hh3cIfQueInHeadRoomFree (1.3.6.1.4.1.25506.2.40.2.2.6.1.15) |
read-only |
Unsigned32 |
Unsigned32 (0..4294967295) |
Available headroom of an inbound queue. |
As per the MIB. |
|
hh3cIfQueInHeadRoomUsedRatio (1.3.6.1.4.1.25506.2.40.2.2.6.1.16) |
read-only |
Unsigned32 |
Unsigned32 (0..4294967295) |
Headroom usage of an inbound queue. |
As per the MIB. |
|
hh3cIfQueInHeadRoomUsedPeak (1.3.6.1.4.1.25506.2.40.2.2.6.1.17) |
read-only |
Unsigned32 |
Unsigned32 (0..4294967295) |
Peak headroom usage of an inbound unicast queue. |
As per the MIB. |
hh3cIfHCSpeedStatTable
About this table
Use this table to obtain the 64-bit packet statistics of an interface.
Support for operations
|
Create |
Edit/Modify |
Delete |
Read |
|
Not supported |
Not supported |
Not supported |
Supported |
Columns
The table index is hh3cIfSpeedStatHCInPkts.
|
Object (OID) |
Access |
Syntax |
Value range |
Description |
Implementation |
|
hh3cIfSpeedStatHCInPkts (1.3.6.1.4.1.25506.2.40.2.1.2.4.1.1) |
read-only |
CounterBasedGauge64 |
Counter64 (0..18446744073709551615) |
Average incoming traffic speed (in packets) of the interface within the specified interval before the latest sampling point. |
As per the MIB. |
|
hh3cIfSpeedStatHCOutPkts (1.3.6.1.4.1.25506.2.40.2.1.2.4.1.2) |
read-only |
CounterBasedGauge64 |
Counter64 (0..18446744073709551615) |
Average outgoing traffic speed (in packets) of the interface within the specified interval before the latest sampling point. |
As per the MIB. |
|
hh3cIfSpeedStatHCInBytes (1.3.6.1.4.1.25506.2.40.2.1.2.4.1.3) |
read-only |
CounterBasedGauge64 |
Counter64 (0..18446744073709551615) |
Average incoming traffic speed (in bytes) of the interface within the specified interval before the latest sampling point. |
As per the MIB. |
|
hh3cIfSpeedStatHCOutBytes (1.3.6.1.4.1.25506.2.40.2.1.2.4.1.4) |
read-only |
CounterBasedGauge64 |
Counter64 (0..18446744073709551615) |
Average outgoing traffic speed (in bytes) of the interface within the specified interval before the latest sampling point. |
As per the MIB. |
|
hh3cIfSpeedStatHCInBits (1.3.6.1.4.1.25506.2.40.2.1.2.4.1.5) |
read-only |
CounterBasedGauge64 |
Counter64 (0..18446744073709551615) |
Average incoming traffic speed (in bits) of the interface within the specified interval before the latest sampling point. |
As per the MIB. |
|
hh3cIfSpeedStatHCOutBits (1.3.6.1.4.1.25506.2.40.2.1.2.4.1.6) |
read-only |
CounterBasedGauge64 |
Counter64 (0..18446744073709551615) |
Average outgoing traffic speed (in bits) of the interface within the specified interval before the latest sampling point. |
As per the MIB. |
hh3cIfExtTrapCfgTable
About this table
Use this table to obtain information about the interface bandwidth and packet loss rate.
Support for operations
|
Create |
Edit/Modify |
Delete |
Read |
|
Not supported |
Not supported |
Not supported |
Supported |
Columns
The table index is hh3cIfBandwidthUpperLimit.
|
Object (OID) |
Access |
Syntax |
Value range |
Description |
Implementation |
|
hh3cIfBandwidthUpperLimit (1.3.6.1.4.1.25506.2.40.3.1.1.1.1) |
read-write |
Integer32 |
Integer32(1..2147483647) |
Upper limit of the interface bandwidth. |
Not supported |
|
hh3cIfDiscardPktRateUpperLimit (1.3.6.1.4.1.25506.2.40.3.1.1.1.2) |
read-write |
Integer32 |
Integer32(1..2147483647) |
Upper limit of the interface packet loss rate. |
Not supported |
hh3cIfMonStatTable
About this table
Use this table to obtain the interface bandwidth usage statistics.
Support for operations
|
Create |
Edit/Modify |
Delete |
Read |
|
Not supported |
Not supported |
Not supported |
Supported |
Columns
The table index is hh3cIfMonInputRateStatistics.
|
Object (OID) |
Access |
Syntax |
Value range |
Description |
Implementation |
|
hh3cIfMonInputUsageStatistics (1.3.6.1.4.1.25506.2.40.5.1.1.1) |
read-only |
Unsigned32 |
Unsigned32 (0..4294967295) |
Inbound bandwidth usage statistics. |
This object can only be reported. |
|
hh3cIfMonOutputUsageStatistics (1.3.6.1.4.1.25506.2.40.5.1.1.2) |
read-only |
Unsigned32 |
Unsigned32 (0..4294967295) |
Outbound bandwidth usage statistics. |
This object can only be reported. |
|
hh3cIfMonInputErrorAlarmStatistics (1.3.6.1.4.1.25506.2.40.5.1.1.3) |
read-only |
Counter64 |
Counter64 (0..18446744073709551615) |
Inbound error alarm statistics. |
This object can only be reported. |
|
hh3cIfMonOutputErrorAlarmStatistics (1.3.6.1.4.1.25506.2.40.5.1.1.4) |
read-only |
Counter64 |
Counter64 (0..18446744073709551615) |
Outbound error alarm statistics. |
This object can only be reported. |
|
hh3cIfMonSdhErrorStatistics (1.3.6.1.4.1.25506.2.40.5.1.1.5) |
read-only |
Counter64 |
Counter64 (0..18446744073709551615) |
SDH error statistics. |
This object can only be reported. |
|
hh3cIfMonSdhB1ErrorStatistics (1.3.6.1.4.1.25506.2.40.5.1.1.6) |
read-only |
Counter64 |
Counter64 (0..18446744073709551615) |
SDH-B1 error statistics. |
This object can only be reported. |
|
hh3cIfMonSdhB2ErrorStatistics (1.3.6.1.4.1.25506.2.40.5.1.1.7) |
read-only |
Counter64 |
Counter64 (0..18446744073709551615) |
SDH-B2 error statistics. |
This object can only be reported. |
|
hh3cIfMonCRCErrorStatistics (1.3.6.1.4.1.25506.2.40.5.1.1.8) |
read-only |
Counter64 |
Counter64 (0..18446744073709551615) |
CRC error statistics. |
This object can only be reported. |
|
hh3cIfMonRxPauseFrameStatistics (1.3.6.1.4.1.25506.2.40.5.1.1.9) |
read-only |
Counter64 |
Counter64 (0..18446744073709551615) |
Received pause frame statistics. |
This object can only be reported. |
|
hh3cIfMonTxPauseFrameStatistics (1.3.6.1.4.1.25506.2.40.5.1.1.10) |
read-only |
Counter64 |
Counter64 (0..18446744073709551615) |
Transmitted pause frame statistics. |
This object can only be reported. |
hh3cIfMonThresholdTable
About this table
Use this table to obtain the interface statistics of an interface.
Support for operations
|
Create |
Edit/Modify |
Delete |
Read |
|
Not supported |
Not supported |
Not supported |
Supported |
Columns
The table index is hh3cIfMonInputUsageLowThres.
|
Object (OID) |
Access |
Syntax |
Value range |
Description |
Implementation |
|
hh3cIfMonInputUsageLowThres (1.3.6.1.4.1.25506.2.40.5.2.1.1.1) |
read-write |
Unsigned32 |
Unsigned32 (0..4294967295) |
Lower threshold for the inbound bandwidth usage. |
This object can only be reported and modified. |
|
hh3cIfMonInputUsageHighThres (1.3.6.1.4.1.25506.2.40.5.2.1.2) |
read-write |
Unsigned32 |
Unsigned32 (0..4294967295) |
Upper threshold for the inbound bandwidth usage. |
This object can only be reported and modified. |
|
hh3cIfMonOutputUsageLowThres (1.3.6.1.4.1.25506.2.40.5.2.1.3) |
read-write |
Unsigned32 |
Unsigned32 (0..4294967295) |
Lower threshold for the outbound bandwidth usage. |
This object can only be reported and modified. |
|
hh3cIfMonOutputUsageHighThres (1.3.6.1.4.1.25506.2.40.5.2.1.4) |
read-write |
Unsigned32 |
Unsigned32 (0..4294967295) |
Upper threshold for the outbound bandwidth usage. |
This object can only be reported and modified. |
|
hh3cIfMonInputErrorAlarmLowThres (1.3.6.1.4.1.25506.2.40.5.2.1.5) |
read-write |
Unsigned32 |
Unsigned32 (0..4294967295) |
Lower threshold for the number of inbound error packets. |
This object can only be reported and modified. |
|
hh3cIfMonInputErrorAlarmHighThres (1.3.6.1.4.1.25506.2.40.5.2.1.6) |
read-write |
Unsigned32 |
Unsigned32 (0..4294967295) |
Upper threshold for the number of inbound error packets. |
This object can only be reported and modified. |
|
hh3cIfMonInputErrorAlarmInterval (1.3.6.1.4.1.25506.2.40.5.2.1.7) |
read-write |
Unsigned32 |
Unsigned32 (0..4294967295) |
Inspection interval for the number of inbound error packets. |
This object can only be reported and modified. |
|
hh3cIfMonOutputErrorAlarmLowThres (1.3.6.1.4.1.25506.2.40.5.2.1.8) |
read-write |
Unsigned32 |
Unsigned32 (0..4294967295) |
Inspection interval for the number of outbound error packets. |
This object can only be reported and modified. |
|
hh3cIfMonOutputErrorAlarmHighThres (1.3.6.1.4.1.25506.2.40.5.2.1.9) |
read-write |
Unsigned32 |
Unsigned32 (0..4294967295) |
Upper threshold for the number of outbound error packets. |
This object can only be reported and modified. |
|
hh3cIfMonOutputErrorAlarmInterval (1.3.6.1.4.1.25506.2.40.5.2.1.10) |
read-write |
Unsigned32 |
Unsigned32 (0..4294967295) |
Inspection interval for the number of outbound error packets. |
This object can only be reported and modified. |
|
hh3cIfMonSdhErrorLowThres (1.3.6.1.4.1.25506.2.40.5.2.1.11) |
read-write |
Unsigned32 |
Unsigned32 (0..4294967295) |
Lower threshold for the number of SDH error packets. |
This object can only be reported and modified. |
|
hh3cIfMonSdhErrorHighThres (1.3.6.1.4.1.25506.2.40.5.2.1.12) |
read-write |
Unsigned32 |
Unsigned32 (0..4294967295) |
Upper threshold for the number of SDH error packets. |
This object can only be reported and modified. |
|
hh3cIfMonSdhErrorInterval (1.3.6.1.4.1.25506.2.40.5.2.1.13) |
read-write |
Unsigned32 |
Unsigned32 (0..4294967295) |
Inspection interval for the number of SDH error packets. |
This object can only be reported and modified. |
|
hh3cIfMonSdhB1ErrorLowThres (1.3.6.1.4.1.25506.2.40.5.2.1.14) |
read-write |
Unsigned32 |
Unsigned32 (0..4294967295) |
Lower threshold for the number of SDH B1 error packets. |
This object can only be reported and modified. |
|
hh3cIfMonSdhB1ErrorHighThres (1.3.6.1.4.1.25506.2.40.5.2.1.15) |
read-write |
Unsigned32 |
Unsigned32 (0..4294967295) |
Upper threshold for the number of SDH B1 error packets. |
This object can only be reported and modified. |
|
hh3cIfMonSdhB1ErrorInterval (1.3.6.1.4.1.25506.2.40.5.2.1.16) |
read-write |
Unsigned32 |
Unsigned32 (0..4294967295) |
Inspection interval for the number of SDH B1 error packets. |
This object can only be reported and modified. |
|
hh3cIfMonSdhB2ErrorLowThres (1.3.6.1.4.1.25506.2.40.5.2.1.17) |
read-write |
Unsigned32 |
Unsigned32 (0..4294967295) |
Lower threshold for the number of SDH B2 error packets. |
This object can only be reported and modified. |
|
hh3cIfMonSdhB2ErrorHighThres (1.3.6.1.4.1.25506.2.40.5.2.1.18) |
read-write |
Unsigned32 |
Unsigned32 (0..4294967295) |
Upper threshold for the number of SDH B2 error packets. |
This object can only be reported and modified. |
|
hh3cIfMonSdhB2ErrorInterval (1.3.6.1.4.1.25506.2.40.5.2.1.19) |
read-write |
Unsigned32 |
Unsigned32 (0..4294967295) |
Inspection interval for the number of SDH B2 error packets. |
This object can only be reported and modified. |
|
hh3cIfMonCRCErrorLowThres (1.3.6.1.4.1.25506.2.40.5.2.1.20) |
read-write |
Unsigned32 |
Unsigned32 (0..4294967295) |
Lower threshold for the number of CRC error packets. |
This object can only be reported and modified. |
|
hh3cIfMonCRCErrorHighThres (1.3.6.1.4.1.25506.2.40.5.2.1.21) |
read-write |
Unsigned32 |
Unsigned32 (0..4294967295) |
Upper threshold for the number of CRC error packets. |
This object can only be reported and modified. |
|
hh3cIfMonCRCErrorInterval (1.3.6.1.4.1.25506.2.40.5.2.1.22) |
read-write |
Unsigned32 |
Unsigned32 (0..4294967295) |
Inspection interval for the number of CRC error packets. |
This object can only be reported and modified. |
|
hh3cIfMonCRCErrType (1.3.6.1.4.1.25506.2.40.5.2.1.23) |
read-write |
Unsigned32 |
Unsigned32 (0..4294967295) |
Inspection type for the CRC error packets. |
This object can only be reported and modified. |
|
hh3cIfMonRxPauseFrameLowThres (1.3.6.1.4.1.25506.2.40.5.2.1.24) |
read-write |
Unsigned32 |
Unsigned32 (0..4294967295) |
Lower threshold for the number of received pause frames. |
This object can only be reported and modified. |
|
hh3cIfMonRxPauseFrameHighThres (1.3.6.1.4.1.25506.2.40.5.2.1.25) |
read-write |
Unsigned32 |
Unsigned32 (0..4294967295) |
Upper threshold for the number of received pause frames. |
This object can only be reported and modified. |
|
hh3cIfMonRxPauseFrameInterval (1.3.6.1.4.1.25506.2.40.5.2.1.26) |
read-write |
Unsigned32 |
Unsigned32 (0..4294967295) |
Inspection interval for the number of received pause frames. |
This object can only be reported and modified. |
|
hh3cIfMonTxPauseFrameLowThres (1.3.6.1.4.1.25506.2.40.5.2.1.27) |
read-write |
Unsigned32 |
Unsigned32 (0..4294967295) |
Lower threshold for the number of transmitted pause frames. |
This object can only be reported and modified. |
|
hh3cIfMonTxPauseFrameHighThres (1.3.6.1.4.1.25506.2.40.5.2.1.28) |
read-write |
Unsigned32 |
Unsigned32 (0..4294967295) |
Upper threshold for the number of transmitted pause frames. |
This object can only be reported and modified. |
|
hh3cIfMonTxPauseFrameInterval (1.3.6.1.4.1.25506.2.40.5.2.1.29) |
read-write |
Unsigned32 |
Unsigned32 (0..4294967295) |
Inspection interval for the number of transmitted pause frames. |
This object can only be reported and modified. |
hh3cifMonAlarmDownEnableTable
About this table
Use this table to set or get whether to enable the interface down function.
Support for operations
|
Create |
Edit/Modify |
Delete |
Read |
|
Not supported |
Not supported |
Not supported |
Supported |
Columns
The table index is hh3cIfMonInputErrorAlarmEnableDown.
|
Object (OID) |
Access |
Syntax |
Value range |
Description |
Implementation |
|
hh3cIfMonInputErrorAlarmEnableDown (1.3.6.1.4.1.25506.2.40.5.2.2.1.1) |
read-write |
TruthValue |
true(1), false(2) |
Whether to shut down the physical interface when the number of inbound error packets exceeds the upper threshold. |
This object can only be reported and modified. |
|
hh3cIfMonOutputErrorAlarmEnableDown (1.3.6.1.4.1.25506.2.40.5.2.2.1.2) |
read-write |
TruthValue |
true(1), false(2) |
Whether to the shut down the physical interface when the number of outbound error packets exceeds the upper threshold. |
This object can only be reported and modified. |
|
hh3cIfMonSdhErrorEnableDown (1.3.6.1.4.1.25506.2.40.5.2.1.3) |
read-write |
TruthValue |
true(1), false(2) |
Whether to the shut down the physical interface when the number of SDH error packets exceeds the upper threshold. |
This object can only be reported and modified. |
|
hh3cIfMonSdhB1ErrorEnableDown (1.3.6.1.4.1.25506.2.40.5.2.1.4) |
read-write |
TruthValue |
true(1), false(2) |
Whether to the shut down the physical interface when the number of SDH B1 error packets exceeds the upper threshold. |
This object can only be reported and modified. |
|
hh3cIfMonSdhB2ErrorEnableDown (1.3.6.1.4.1.25506.2.40.5.2.1.5) |
read-write |
TruthValue |
true(1), false(2) |
Whether to the shut down the physical interface when the number of SDH B2 error packets exceeds the upper threshold. |
This object can only be reported and modified. |
|
hh3cIfMonCRCErrorEnableDown (1.3.6.1.4.1.25506.2.40.5.2.1.6) |
read-write |
TruthValue |
true(1), false(2) |
Whether to the shut down the physical interface when the number of CRC error packets exceeds the upper threshold. |
This object can only be reported and modified. |
Notifications
The following information describes the notifications included in the HH3C-IF-EXT-MIB module.
hh3cIfPortUp
Basic information
|
OID |
Event |
Type |
Severity |
Recovery notification |
Default status |
|
1.3.6.1.4.1.25506.2.40.3.0.5 |
Link-up alarm |
Informational |
- |
- |
ON |
Description
The notification is generated when physical state of the interface changes to up.
Status control
ON
CLI: snmp-agent trap enable standard linkup
OFF
CLI: undo snmp-agent trap enable standard linkup
Objects
|
OID (object name) |
Description |
Index |
Type |
Value range |
|
1.3.6.1.2.1.2.2.1.1 (ifIndex) |
Interface index. |
Yes |
Integer32 |
Standard MIB values. |
|
1.3.6.1.2.1.2.2.1.1 (ifDescr) |
Interface description. |
No |
OCTET STRING |
Unsigned32 (0..255) |
Recommended action
No action is required.
hh3cIfPortDown
Basic information
|
OID |
Event |
Type |
Severity |
Recovery notification |
Default status |
|
1.3.6.1.4.1.25506.2.40.3.0.6 |
Link-down alarm. |
Informational |
- |
- |
ON |
Description
The notification is generated when physical state of the interface changes to down.
Status control
ON
CLI: snmp-agent trap enable standard linkup
OFF
CLI: undo snmp-agent trap enable standard linkup
Objects
|
OID (object name) |
Description |
Index |
Type |
Value range |
|
1.3.6.1.2.1.2.2.1.1 (ifIndex) |
Interface index. |
Yes |
Integer32 |
Standard MIB values. |
|
1.3.6.1.2.1.2.2.1.1 (ifDescr) |
Interface description. |
No |
OCTET STRING |
Unsigned32 (0..255) |
Recommended action
No action is required.
hh3cIfMonInputUsageRising
Basic information
|
OID |
Event |
Type |
Severity |
Recovery notification |
Default status |
|
1.3.6.1.4.1.25506.2.40.6.0.1 |
Inbound bandwidth usage rising alarm. |
Informational |
- |
- |
ON |
Description
The notification is generated when the inbound bandwidth usage exceeds the upper threshold.
Status control
ON
CLI: snmp-agent trap enable ifmonitor input-usage
OFF
CLI: undo snmp-agent trap enable ifmonitor input-usage
Objects
|
OID (object name) |
Description |
Index |
Type |
Value range |
|
1.3.6.1.2.1.2.2.1.1 (ifIndex) |
Interface index. |
Yes |
Integer32 |
Standard MIB values. |
|
1.3.6.1.2.1.2.2.1.2 (ifDescr) |
Interface description. |
No |
OCTET STRING |
Unsigned32 (0..255) |
|
1.3.6.1.4.1.25506.2.40.5.2.1.1.1(hh3cIfMonInputUsageLowThres) |
Lower threshold for the inbound bandwidth usage. |
No |
Unsigned32 |
1-4294967295 |
|
1.3.6.1.4.1.25506.2.40.5.2.1.1.2(hh3cIfMonInputUsageHighThres) |
Upper threshold for the inbound bandwidth usage. |
No |
Unsigned32 |
1-4294967295 |
|
1.3.6.1.4.1.25506.2.40.5.1.1.1.1(hh3cIfMonInputUsageStatistics) |
Inbound bandwidth usage statistics. |
No |
Counter64 |
Standard MIB values. |
Recommended action
To resolve the issue:
1. Verify that the upper threshold is set reasonably.
2. If the issue persists, contact H3C Support.
hh3cIfMonInputUsageResume
Basic information
|
OID |
Event |
Type |
Severity |
Recovery notification |
Default status |
|
1.3.6.1.4.1.25506.2.40.6.0.2 |
Inbound bandwidth usage recovery alarm |
Informational |
- |
- |
ON |
Description
The notification is generated when the inbound bandwidth usage drops from above the upper threshold to below the lower threshold.
Status control
ON
CLI: snmp-agent trap enable ifmonitor input-usage
OFF
CLI: undo snmp-agent trap enable ifmonitor input-usage
Objects
|
OID (object name) |
Description |
Index |
Type |
Value range |
|
1.3.6.1.2.1.2.2.1.1 (ifIndex) |
Interface index. |
Yes |
Integer32 |
Standard MIB values. |
|
1.3.6.1.2.1.2.2.1.2 (ifDescr) |
Interface description. |
No |
OCTET STRING |
Unsigned32 (0..255) |
|
1.3.6.1.4.1.25506.2.40.5.2.1.1.1(hh3cIfMonInputUsageLowThres) |
Lower threshold for the inbound bandwidth usage. |
No |
Unsigned32 |
1-4294967295 |
|
1.3.6.1.4.1.25506.2.40.5.2.1.1.2(hh3cIfMonInputUsageHighThres) |
Upper threshold for the inbound bandwidth usage. |
No |
Unsigned32 |
1-4294967295 |
|
1.3.6.1.4.1.25506.2.40.5.1.1.1.1(hh3cIfMonInputUsageStatistics) |
Inbound bandwidth usage statistics. |
No |
Counter64 |
Standard MIB values. |
Recommended action
No action is required.
hh3cIfMonOutputUsageRising
Basic information
|
OID |
Event |
Type |
Severity |
Recovery notification |
Default status |
|
1.3.6.1.4.1.25506.2.40.6.0.3 |
Outbound bandwidth usage rising alarm |
Informational |
- |
- |
ON |
Description
The notification is generated when the outbound bandwidth usage exceeds the upper threshold.
Status control
ON
CLI: snmp-agent trap enable ifmonitor output-usage
OFF
CLI: undo snmp-agent trap enable ifmonitor output-usage
Objects
|
OID (object name) |
Description |
Index |
Type |
Value range |
|
1.3.6.1.2.1.2.2.1.1 (ifIndex) |
Interface index. |
Yes |
Integer32 |
Standard MIB values. |
|
1.3.6.1.2.1.2.2.1.2 (ifDescr) |
Interface description. |
No |
OCTET STRING |
Unsigned32 (0..255) |
|
1.3.6.1.4.1.25506.2.40.5.2.1.1.3(hh3cIfMonOutputUsageLowThres) |
Lower threshold for the outbound bandwidth usage. |
No |
Unsigned32 |
1-4294967295 |
|
1.3.6.1.4.1.25506.2.40.5.2.1.1.4(hh3cIfMonOutputUsageHighThres) |
Upper threshold for the outbound bandwidth usage. |
No |
Unsigned32 |
1-4294967295 |
|
1.3.6.1.4.1.25506.2.40.5.1.1.1.2(hh3cIfMonOutputUsageStatistics) |
Outbound bandwidth usage statistics. |
No |
Counter64 |
Standard MIB values. |
Recommended action
No action is required.
hh3cIfMonOutputUsageResume
Basic information
|
OID |
Event |
Type |
Severity |
Recovery notification |
Default status |
|
1.3.6.1.4.1.25506.2.40.6.0.4 |
Outbound bandwidth usage recovery alarm |
Informational |
- |
- |
ON |
Description
The notification is generated when the outbound bandwidth usage drops from above the upper threshold to below the lower threshold.
Status control
ON
CLI: snmp-agent trap enable ifmonitor output-usage
OFF
CLI: undo snmp-agent trap enable ifmonitor output-usage
Objects
|
OID (object name) |
Description |
Index |
Type |
Value range |
|
1.3.6.1.2.1.2.2.1.1 (ifIndex) |
Interface index. |
Yes |
Integer32 |
Standard MIB values. |
|
1.3.6.1.2.1.2.2.1.2 (ifDescr) |
Interface description. |
No |
OCTET STRING |
Unsigned32 (0..255) |
|
1.3.6.1.4.1.25506.2.40.5.2.1.1.3(hh3cIfMonOutputUsageLowThres) |
Lower threshold for the outbound bandwidth usage. |
No |
Unsigned32 |
1-4294967295 |
|
1.3.6.1.4.1.25506.2.40.5.2.1.1.4(hh3cIfMonOutputUsageHighThres) |
Upper threshold for the outbound bandwidth usage. |
No |
Unsigned32 |
1-4294967295 |
|
1.3.6.1.4.1.25506.2.40.5.1.1.1.2(hh3cIfMonOutputUsageStatistics) |
Outbound bandwidth usage statistics. |
No |
Counter64 |
Standard MIB values. |
Recommended action
No action is required.
hh3cIfMonInputErrorAlarmRising
Basic information
|
OID |
Event |
Type |
Severity |
Recovery notification |
Default status |
|
1.3.6.1.4.1.25506.2.40.6.0.5 |
Inbound error packet rising alarm |
Informational |
- |
- |
ON |
Description
The notification is generated when the number of inbound error packets exceeds the upper threshold within the specified interval.
Status control
ON
CLI: snmp-agent trap enable ifmonitor input-error
OFF
CLI: undo snmp-agent trap enable ifmonitor input-error
Objects
|
OID (object name) |
Description |
Index |
Type |
Value range |
|
1.3.6.1.2.1.2.2.1.1 (ifIndex) |
Interface index. |
Yes |
Integer32 |
Standard MIB values. |
|
1.3.6.1.2.1.2.2.1.2 (ifDescr) |
Interface description. |
No |
OCTET STRING |
Unsigned32 (0..255) |
|
1.3.6.1.4.1.25506.2.40.5.2.1.1.6(hh3cIfMonInputErrorAlarmHighThres) |
Upper threshold for the number of inbound error packets. |
No |
Unsigned32 |
1-4294967295 |
|
1.3.6.1.4.1.25506.2.40.5.2.1.1.5(hh3cIfMonInputErrorAlarmLowThres) |
Lower threshold for the number of inbound error packets. |
No |
Unsigned32 |
1-4294967295 |
|
1.3.6.1.4.1.25506.2.40.5.1.1.1.3(hh3cIfMonInputErrorAlarmStatistics) |
Inbound error alarm statistics. |
No |
Counter64 |
1-4294967295 |
|
1.3.6.1.4.1.25506.2.40.5.2.1.1.7(hh3cIfMonInputErrorAlarmInterval) |
Inbound error alarm statistics collection interval. |
No |
Unsigned32 |
1-65535 |
Recommended action
To resolve the issue:
1. Verify that the upper threshold is set reasonably.
2. If the issue persists, contact H3C Support.
hh3cIfMonInputErrorAlarmResume
Basic information
|
OID |
Event |
Type |
Severity |
Recovery notification |
Default status |
|
1.3.6.1.4.1.25506.2.40.6.0.6 |
Inbound error packet recovery alarm |
Informational |
- |
- |
ON |
Description
The notification is generated when the number of inbound error packets drops from above the upper threshold to below the lower threshold within the specified interval.
Status control
ON
CLI: snmp-agent trap enable ifmonitor input-error
OFF
CLI: undo snmp-agent trap enable ifmonitor input -error
Objects
|
OID (object name) |
Description |
Index |
Type |
Value range |
|
1.3.6.1.2.1.2.2.1.1 (ifIndex) |
Interface index. |
Yes |
Integer32 |
Standard MIB values. |
|
1.3.6.1.2.1.2.2.1.2 (ifDescr) |
Interface description. |
No |
OCTET STRING |
Unsigned32 (0..255) |
|
1.3.6.1.4.1.25506.2.40.5.2.1.1.5(hh3cIfMonInputErrorAlarmLowThres) |
Lower threshold for the number of inbound error packets. |
No |
Unsigned32 |
1-4294967295 |
|
1.3.6.1.4.1.25506.2.40.5.2.1.1.6(hh3cIfMonInputErrorAlarmHighThres) |
Upper threshold for the number of inbound error packets. |
No |
Unsigned32 |
1-4294967295 |
|
1.3.6.1.4.1.25506.2.40.5.1.1.1.3(hh3cIfMonInputErrorAlarmStatistics) |
Inbound error alarm statistics. |
No |
Counter64 |
1-4294967295 |
|
1.3.6.1.4.1.25506.2.40.5.2.1.1.7(hh3cIfMonInputErrorAlarmInterval) |
Inbound error alarm statistics collection interval. |
No |
Unsigned32 |
1-65535 |
Recommended action
No action is required.
hh3cIfMonOutputErrorAlarmRising
Basic information
|
OID |
Event |
Type |
Severity |
Recovery notification |
Default status |
|
1.3.6.1.4.1.25506.2.40.6.0.7 |
Outbound error packet rising alarm |
Informational |
- |
- |
ON |
Description
The notification is generated when the number of outbound error packets exceeds the upper threshold within the specified interval.
Status control
ON
CLI: snmp-agent trap enable ifmonitor output-error
OFF
CLI: undo snmp-agent trap enable ifmonitor output-error
Objects
|
OID (object name) |
Description |
Index |
Type |
Value range |
|
1.3.6.1.2.1.2.2.1.1 (ifIndex) |
Interface index. |
Yes |
Integer32 |
Standard MIB values. |
|
1.3.6.1.2.1.2.2.1.2 (ifDescr) |
Interface description. |
No |
OCTET STRING |
Unsigned32 (0..255) |
|
1.3.6.1.4.1.25506.2.40.5.2.1.1.9(hh3cIfMonOutputErrorAlarmHighThres) |
Upper threshold for the number of outbound error packets. |
No |
Unsigned32 |
1-4294967295 |
|
1.3.6.1.4.1.25506.2.40.5.2.1.1.8(hh3cIfMonOutputErrorAlarmLowThres) |
Lower threshold for the number of outbound error packets. |
No |
Unsigned32 |
1-4294967295 |
|
1.3.6.1.4.1.25506.2.40.5.1.1.1.4(hh3cIfMonOutputErrorAlarmStatistics) |
Outbound error alarm statistics. |
No |
Counter64 |
1-4294967295 |
|
1.3.6.1.4.1.25506.2.40.5.2.1.1.10(hh3cIfMonOutputErrorAlarmInterval) |
Outbound error alarm statistics collection interval. |
No |
Unsigned32 |
1-65535 |
Recommended action
No action is required.
hh3cIfMonOutputErrorAlarmResume
Basic information
|
OID |
Event |
Type |
Severity |
Recovery notification |
Default status |
|
1.3.6.1.4.1.25506.2.40.6.0.8 |
Outbound error packet recovery alarm |
Informational |
- |
- |
ON |
Description
The notification is generated when the number of outbound error packets drops from above the upper threshold to below the lower threshold within the specified interval.
Status control
ON
CLI: snmp-agent trap enable ifmonitor output-error
OFF
CLI: undo snmp-agent trap enable ifmonitor output-error
Objects
|
OID (object name) |
Description |
Index |
Type |
Value range |
|
1.3.6.1.2.1.2.2.1.1 (ifIndex) |
Interface index. |
Yes |
Integer32 |
Standard MIB values. |
|
1.3.6.1.2.1.2.2.1.2 (ifDescr) |
Interface description. |
No |
OCTET STRING |
Unsigned32 (0..255) |
|
1.3.6.1.4.1.25506.2.40.5.2.1.1.9(hh3cIfMonOutputErrorAlarmHighThres) |
Upper threshold for the number of outbound error packets. |
No |
Unsigned32 |
1-4294967295 |
|
1.3.6.1.4.1.25506.2.40.5.2.1.1.8(hh3cIfMonOutputErrorAlarmLowThres) |
Lower threshold for the number of outbound error packets. |
No |
Unsigned32 |
1-4294967295 |
|
1.3.6.1.4.1.25506.2.40.5.1.1.1.4(hh3cIfMonOutputErrorAlarmStatistics) |
Outbound error alarm statistics. |
No |
Counter64 |
1-4294967295 |
|
1.3.6.1.4.1.25506.2.40.5.2.1.1.10(hh3cIfMonOutputErrorAlarmInterval) |
Outbound error alarm statistics collection interval. |
No |
Unsigned32 |
1-65535 |
Recommended action
No action is required.
hh3cIfMonSdhErrorRising
Basic information
|
OID |
Event |
Type |
Severity |
Recovery notification |
Default status |
|
1.3.6.1.4.1.25506.2.40.6.0.9 |
SDH error packet rising alarm |
Informational |
- |
- |
ON |
Description
The notification is generated when the number of SDH error packets exceeds the upper threshold within the specified interval.
Status control
ON
Syntax: snmp-agent trap enable ifmonitor sdh-error
OFF
CLI: undo snmp-agent trap enable ifmonitor sdh-error
Objects
|
OID (object name) |
Description |
Index |
Type |
Value range |
|
1.3.6.1.2.1.2.2.1.1 (ifIndex) |
Interface index. |
Yes |
Integer32 |
Standard MIB values. |
|
1.3.6.1.2.1.2.2.1.2 (ifDescr) |
Interface description. |
No |
OCTET STRING |
Unsigned32 (0..255) |
|
1.3.6.1.4.1.25506.2.40.5.2.1.1.11(hh3cIfMonSdhErrorLowThres) |
Lower threshold for the number of SDH error packets. |
No |
Unsigned32 |
1-4294967295 |
|
1.3.6.1.4.1.25506.2.40.5.2.1.1.12(hh3cIfMonSdhErrorHighThres) |
Upper threshold for the number of SDH error packets. |
No |
Unsigned32 |
1-4294967295 |
|
1.3.6.1.4.1.25506.2.40.5.1.1.1.5(hh3cIfMonSdhErrorStatistics) |
SDH error statistics. |
No |
Counter64 |
1-4294967295 |
|
1.3.6.1.4.1.25506.2.40.5.2.1.1.13(hh3cIfMonSdhErrorInterval) |
SDH error statistics collection interval. |
No |
Unsigned32 |
1-65535 |
Recommended action
To resolve the issue:
1. Verify that the upper threshold is set reasonably.
2. If the issue persists, contact H3C Support.
hh3cIfMonSdhErrorResume
Basic information
|
OID |
Event |
Type |
Severity |
Recovery notification |
Default status |
|
1.3.6.1.4.1.25506.2.40.6.0.10 |
SDH error packet recovery alarm |
Informational |
- |
- |
ON |
Description
The notification is generated when the number of SDH error packets drops from above the upper threshold to below the lower threshold within the specified interval.
Status control
ON
CLI: snmp-agent trap enable ifmonitor sdh-error
OFF
CLI: undo snmp-agent trap enable ifmonitor sdh-error
Objects
|
OID (object name) |
Description |
Index |
Type |
Value range |
|
1.3.6.1.2.1.2.2.1.1 (ifIndex) |
Interface index. |
Yes |
Integer32 |
Standard MIB values. |
|
1.3.6.1.2.1.2.2.1.2 (ifDescr) |
Interface description. |
No |
OCTET STRING |
Unsigned32 (0..255) |
|
1.3.6.1.4.1.25506.2.40.5.2.1.1.11(hh3cIfMonSdhErrorLowThres) |
Lower threshold for the number of SDH error packets. |
No |
Unsigned32 |
1-4294967295 |
|
1.3.6.1.4.1.25506.2.40.5.2.1.1.12(hh3cIfMonSdhErrorHighThres) |
Upper threshold for the number of SDH error packets. |
No |
Unsigned32 |
1-4294967295 |
|
1.3.6.1.4.1.25506.2.40.5.1.1.1.5(hh3cIfMonSdhErrorStatistics) |
SDH error statistics. |
No |
Counter64 |
1-4294967295 |
|
1.3.6.1.4.1.25506.2.40.5.2.1.1.13(hh3cIfMonSdhErrorInterval) |
SDH error statistics collection interval. |
No |
Unsigned32 |
1-65535 |
Recommended action
No action is required.
hh3cIfMonSdhB1ErrorRising
Basic information
|
OID |
Event |
Type |
Severity |
Recovery notification |
Default status |
|
1.3.6.1.4.1.25506.2.40.6.0.11 |
SDH B1 error packet rising alarm |
Informational |
- |
- |
ON |
Description
The notification is generated when the number of SDH B1 error packets exceeds the upper threshold within the specified interval.
Status control
ON
CLI: snmp-agent trap enable ifmonitor sdh-b1-error
OFF
CLI: undo snmp-agent trap enable ifmonitor sdh-b1-error
Objects
|
OID (object name) |
Description |
Index |
Type |
Value range |
|
1.3.6.1.2.1.2.2.1.1 (ifIndex) |
Interface index. |
Yes |
Integer32 |
Standard MIB values. |
|
1.3.6.1.2.1.2.2.1.2 (ifDescr) |
Interface description. |
No |
OCTET STRING |
Unsigned32 (0..255) |
|
1.3.6.1.4.1.25506.2.40.5.2.1.1.14(hh3cIfMonSdhB1ErrorLowThres) |
Lower threshold for the number of SDH B1 error packets. |
No |
Unsigned32 |
1-4294967295 |
|
1.3.6.1.4.1.25506.2.40.5.2.1.1.15(hh3cIfMonSdhB1ErrorHighThres) |
Upper threshold for the number of SDH B1 error packets. |
No |
Unsigned32 |
1-4294967295 |
|
1.3.6.1.4.1.25506.2.40.5.1.1.1.6(hh3cIfMonSdhB1ErrorStatistics) |
SDH B1 error packet statistics. |
No |
Counter64 |
1-4294967295 |
|
1.3.6.1.4.1.25506.2.40.5.2.1.1.16(hh3cIfMonSdhB1ErrorInterval) |
SDH B1 error statistics collection interval. |
No |
Unsigned32 |
1-65535 |
Recommended action
To resolve the issue:
1. Verify that the upper threshold is set reasonably.
2. If the issue persists, contact H3C Support.
hh3cIfMonSdhB1ErrorResume
Basic information
|
OID |
Event |
Type |
Severity |
Recovery notification |
Default status |
|
1.3.6.1.4.1.25506.2.40.6.0.12 |
SDH B1 error packet recovery alarm |
Informational |
- |
- |
ON |
Description
The notification is generated when the number of SDH B1 error packets drops from above the upper threshold to below the lower threshold within the specified interval.
Status control
ON
CLI: snmp-agent trap enable ifmonitor sdh-b1-error
OFF
CLI: undo snmp-agent trap enable ifmonitor sdh-b1-error
Objects
|
OID (object name) |
Description |
Index |
Type |
Value range |
|
1.3.6.1.2.1.2.2.1.1 (ifIndex) |
Interface index. |
Yes |
Integer32 |
Standard MIB values. |
|
1.3.6.1.2.1.2.2.1.2 (ifDescr) |
Interface description. |
No |
OCTET STRING |
Unsigned32 (0..255) |
|
1.3.6.1.4.1.25506.2.40.5.2.1.1.14(hh3cIfMonSdhB1ErrorLowThres) |
Lower threshold for the number of SDH B1 error packets. |
No |
Unsigned32 |
1-4294967295 |
|
1.3.6.1.4.1.25506.2.40.5.2.1.1.15(hh3cIfMonSdhB1ErrorHighThres) |
Upper threshold for the number of SDH B1 error packets. |
No |
Unsigned32 |
1-4294967295 |
|
1.3.6.1.4.1.25506.2.40.5.1.1.1.6(hh3cIfMonSdhB1ErrorStatistics) |
SDH B1 error packet statistics. |
No |
Counter64 |
1-4294967295 |
|
1.3.6.1.4.1.25506.2.40.5.2.1.1.16(hh3cIfMonSdhB1ErrorInterval) |
SDH B1 error statistics collection interval. |
No |
Unsigned32 |
1-65535 |
Recommended action
No action is required.
hh3cIfMonSdhB2ErrorRising
Basic information
|
OID |
Event |
Type |
Severity |
Recovery notification |
Default status |
|
1.3.6.1.4.1.25506.2.40.6.0.13 |
SDH B2 error packet rising alarm |
Informational |
- |
- |
ON |
Description
The notification is generated when the number of SDH B2 error packets exceeds the upper threshold within the specified interval.
Status control
ON
CLI: snmp-agent trap enable ifmonitor sdh-b2-error
OFF
CLI: undo snmp-agent trap enable ifmonitor sdh-b2-error
Objects
|
OID (object name) |
Description |
Index |
Type |
Value range |
|
1.3.6.1.2.1.2.2.1.1 (ifIndex) |
Interface index. |
Yes |
Integer32 |
Standard MIB values. |
|
1.3.6.1.2.1.2.2.1.2 (ifDescr) |
Interface description. |
No |
OCTET STRING |
Unsigned32 (0..255) |
|
1.3.6.1.4.1.25506.2.40.5.2.1.1.17(hh3cIfMonSdhB2ErrorLowThres) |
Lower threshold for the number of SDH B2 error packets. |
No |
Unsigned32 |
1-4294967295 |
|
1.3.6.1.4.1.25506.2.40.5.2.1.1.18(hh3cIfMonSdhB2ErrorHighThres) |
Upper threshold for the number of SDH B2 error packets. |
No |
Unsigned32 |
1-4294967295 |
|
1.3.6.1.4.1.25506.2.40.5.1.1.1.7(hh3cIfMonSdhB2ErrorStatistics) |
SDH B2 error packet statistics. |
No |
Counter64 |
1-4294967295 |
|
1.3.6.1.4.1.25506.2.40.5.2.1.1.19(hh3cIfMonSdhB2ErrorInterval) |
SDH B2 error statistics collection interval. |
No |
Unsigned32 |
1-65535 |
Recommended action
No action is required.
hh3cIfMonSdhB2ErrorResume
Basic information
|
OID |
Event |
Type |
Severity |
Recovery notification |
Default status |
|
1.3.6.1.4.1.25506.2.40.6.0.14 |
SDH B2 error packet rising alarm |
Informational |
- |
- |
ON |
Description
The notification is generated when the number of SDH B2 error packets drops from above the upper threshold to below the lower threshold within the specified interval.
Status control
ON
CLI: snmp-agent trap enable ifmonitor sdh-b2-error
OFF
CLI: undo snmp-agent trap enable ifmonitor sdh-b2-error
Objects
|
OID (object name) |
Description |
Index |
Type |
Value range |
|
1.3.6.1.2.1.2.2.1.1 (ifIndex) |
Interface index. |
Yes |
Integer32 |
Standard MIB values. |
|
1.3.6.1.2.1.2.2.1.2 (ifDescr) |
Interface description. |
No |
OCTET STRING |
Unsigned32 (0..255) |
|
1.3.6.1.4.1.25506.2.40.5.2.1.1.17(hh3cIfMonSdhB2ErrorLowThres) |
Lower threshold for the number of SDH B2 error packets. |
No |
Unsigned32 |
1-4294967295 |
|
1.3.6.1.4.1.25506.2.40.5.2.1.1.18(hh3cIfMonSdhB2ErrorHighThres) |
Upper threshold for the number of SDH B2 error packets. |
No |
Unsigned32 |
1-4294967295 |
|
1.3.6.1.4.1.25506.2.40.5.1.1.1.7(hh3cIfMonSdhB2ErrorStatistics) |
SDH B2 error statistics. |
No |
Counter64 |
1-4294967295 |
|
1.3.6.1.4.1.25506.2.40.5.2.1.1.19(hh3cIfMonSdhB2ErrorInterval) |
SDH B2 error statistics collection interval. |
No |
Unsigned32 |
1-65535 |
Recommended action
No action is required.
hh3cIfMonCRCErrorRising
Basic information
|
OID |
Event |
Type |
Severity |
Recovery notification |
Default status |
|
1.3.6.1.4.1.25506.2.40.6.0.15 |
CRC error packet rising alarm |
Informational |
- |
- |
ON |
Description
The notification is generated when the number of CRC error packets exceeds the upper threshold within the specified interval.
Status control
ON
CLI: snmp-agent trap enable ifmonitor crc-error
OFF
CLI: undo snmp-agent trap enable ifmonitor crc-error
Objects
|
OID (object name) |
Description |
Index |
Type |
Value range |
|
1.3.6.1.2.1.2.2.1.1 (ifIndex) |
Interface index. |
Yes |
Integer32 |
Standard MIB values. |
|
1.3.6.1.2.1.2.2.1.2 (ifDescr) |
Interface description. |
No |
OCTET STRING |
Unsigned32 (0..255) |
|
1.3.6.1.4.1.25506.2.40.5.2.1.1.21(hh3cIfMonCRCErrorHighThres) |
Upper threshold for the number of CRC error packets. |
No |
Unsigned32 |
1-4294967295 |
|
1.3.6.1.4.1.25506.2.40.5.2.1.1.20(hh3cIfMonCRCErrorLowThres) |
Lower threshold for the number of CRC error packets. |
No |
Unsigned32 |
1-4294967295 |
|
1.3.6.1.4.1.25506.2.40.5.1.1.1.8(hh3cIfMonCRCErrorStatistics) |
CRC error statistics. |
No |
Counter64 |
1-4294967295 |
|
1.3.6.1.4.1.25506.2.40.5.2.1.1.22(hh3cIfMonCRCErrorInterval) |
CRC error statistics collection interval. |
No |
Unsigned32 |
1-65535 |
|
1.3.6.1.4.1.25506.2.40.5.2.1.1.23(hh3cIfMonCRCErrType) |
CRC error statistics. |
No |
INTEGER |
1-2 |
Recommended action
To resolve the issue:
1. Verify that the upper threshold is set reasonably.
2. If the issue persists, contact H3C Support.
hh3cIfMonCRCErrorResume
Basic information
|
OID |
Event |
Type |
Severity |
Recovery notification |
Default status |
|
1.3.6.1.4.1.25506.2.40.6.0.16 |
CRC error packet recovery alarm |
Informational |
- |
- |
ON |
Description
The notification is generated when the number of CRC error packets drops from above the upper threshold to below the lower threshold within the specified interval.
Status control
ON
CLI: snmp-agent trap enable ifmonitor crc-error
OFF
CLI: undo snmp-agent trap enable ifmonitor crc-error
Objects
|
OID (object name) |
Description |
Index |
Type |
Value range |
|
1.3.6.1.2.1.2.2.1.1 (ifIndex) |
Interface index. |
Yes |
Integer32 |
Standard MIB values. |
|
1.3.6.1.2.1.2.2.1.2 (ifDescr) |
Interface description. |
No |
OCTET STRING |
Unsigned32 (0..255) |
|
1.3.6.1.4.1.25506.2.40.5.2.1.1.21(hh3cIfMonCRCErrorHighThres) |
Upper threshold for the number of CRC error packets. |
No |
Unsigned32 |
1-4294967295 |
|
1.3.6.1.4.1.25506.2.40.5.2.1.1.20(hh3cIfMonCRCErrorLowThres) |
Lower threshold for the number of CRC error packets. |
No |
Unsigned32 |
1-4294967295 |
|
1.3.6.1.4.1.25506.2.40.5.1.1.1.8(hh3cIfMonCRCErrorStatistics) |
CRC error statistics. |
No |
Counter64 |
1-4294967295 |
|
1.3.6.1.4.1.25506.2.40.5.2.1.1.22(hh3cIfMonCRCErrorInterval) |
CRC error statistics collection interval. |
No |
Unsigned32 |
1-65535 |
|
1.3.6.1.4.1.25506.2.40.5.2.1.1.23(hh3cIfMonCRCErrType) |
CRC error statistics. |
No |
INTEGER |
1-2 |
Recommended action
No action is required.
hh3cIfMonRxPauseFrameRising
Basic information
|
OID |
Event |
Type |
Severity |
Recovery notification |
Default status |
|
1.3.6.1.4.1.25506.2.40.6.0.17 |
Received pause frame rising alarm |
Informational |
- |
- |
ON |
Description
The notification is generated when the number of received pause frames exceeds the upper threshold within the specified interval.
Status control
ON
CLI: snmp-agent trap enable ifmonitor rx-pause
OFF
CLI: undo snmp-agent trap enable ifmonitor rx-pause
Objects
|
OID (object name) |
Description |
Index |
Type |
Value range |
|
1.3.6.1.2.1.2.2.1.1 (ifIndex) |
Interface index. |
Yes |
Integer32 |
Standard MIB values. |
|
1.3.6.1.2.1.2.2.1.2 (ifDescr) |
Interface description. |
No |
OCTET STRING |
Unsigned32 (0..255) |
|
1.3.6.1.4.1.25506.2.40.5.2.1.1.25(hh3cIfMonRxPauseFrameHighThres) |
Upper threshold for received pause frames. |
No |
Unsigned32 |
1-4294967295 |
|
1.3.6.1.4.1.25506.2.40.5.2.1.1.24(hh3cIfMonRxPauseFrameLowThres) |
Lower threshold for received pause frames. |
No |
Unsigned32 |
1-4294967295 |
|
1.3.6.1.4.1.25506.2.40.5.1.1.1.9(hh3cIfMonRxPauseFrameStatistics) |
Received pause frame statistics. |
No |
Counter64 |
1-4294967295 |
|
1.3.6.1.4.1.25506.2.40.5.2.1.1.26(hh3cIfMonRxPauseFrameInterval) |
Received pause frame statistics collection interval. |
No |
Unsigned32 |
1-65535 |
Recommended action
No action is required.
hh3cIfMonRxPauseFrameResume
Basic information
|
OID |
Event |
Type |
Severity |
Recovery notification |
Default status |
|
1.3.6.1.4.1.25506.2.40.6.0.18 |
Received pause frame recovery alarm |
Informational |
- |
- |
ON |
Description
The notification is generated when the number of received pause frames drops from above the upper threshold to below the lower-threshold within the specified interval.
Status control
ON
CLI: snmp-agent trap enable ifmonitor rx-pause
OFF
CLI: undo snmp-agent trap enable ifmonitor rx-pause
Objects
|
OID (object name) |
Description |
Index |
Type |
Value range |
|
1.3.6.1.2.1.2.2.1.1 (ifIndex) |
Interface index. |
Yes |
Integer32 |
Standard MIB values. |
|
1.3.6.1.2.1.2.2.1.2 (ifDescr) |
Interface description. |
No |
OCTET STRING |
Unsigned32 (0..255) |
|
1.3.6.1.4.1.25506.2.40.5.2.1.1.24(hh3cIfMonRxPauseFrameLowThres) |
Lower threshold for received pause frames. |
No |
Unsigned32 |
1-4294967295 |
|
1.3.6.1.4.1.25506.2.40.5.2.1.1.25(hh3cIfMonRxPauseFrameHighThres) |
Upper threshold for received pause frames. |
No |
Unsigned32 |
1-4294967295 |
|
1.3.6.1.4.1.25506.2.40.5.1.1.1.9(hh3cIfMonRxPauseFrameStatistics) |
Received pause frame statistics collection interval. |
No |
Counter64 |
1-4294967295 |
|
1.3.6.1.4.1.25506.2.40.5.2.1.1.26(hh3cIfMonRxPauseFrameInterval) |
Upper threshold for received pause frames. |
No |
Unsigned32 |
1-65535 |
Recommended action
No action is required.
hh3cIfMonTxPauseFrameRising
Basic information
|
OID |
Event |
Type |
Severity |
Recovery notification |
Default status |
|
1.3.6.1.4.1.25506.2.40.6.0.19 |
Transmitted pause frame rising alarm |
Informational |
- |
- |
ON |
Description
The notification is generated when the number of transmitted pause frames exceeds the upper threshold within the specified interval.
Status control
ON
CLI: snmp-agent trap enable ifmonitor tx-pause
OFF
CLI: undo snmp-agent trap enable ifmonitor tx-pause
Objects
|
OID (object name) |
Description |
Index |
Type |
Value range |
|
1.3.6.1.2.1.2.2.1.1 (ifIndex) |
Interface index. |
Yes |
Integer32 |
Standard MIB values. |
|
1.3.6.1.2.1.2.2.1.2 (ifDescr) |
Interface description. |
No |
OCTET STRING |
Unsigned32 (0..255) |
|
1.3.6.1.4.1.25506.2.40.5.2.1.1.28(hh3cIfMonTxPauseFrameHighThres) |
Upper threshold for transmitted pause frames. |
No |
Unsigned32 |
1-4294967295 |
|
1.3.6.1.4.1.25506.2.40.5.2.1.1.27(hh3cIfMonTxPauseFrameLowThres) |
Lower threshold for transmitted pause frames. |
No |
Unsigned32 |
1-4294967295 |
|
1.3.6.1.4.1.25506.2.40.5.1.1.1.10(hh3cIfMonTxPauseFrameStatistics) |
Transmitted pause frame statistics. |
No |
Counter64 |
1-4294967295 |
|
1.3.6.1.4.1.25506.2.40.5.2.1.1.29(hh3cIfMonTxPauseFrameInterval) |
Transmitted pause frame statistics collection interval. |
No |
Unsigned32 |
1-65535 |
Recommended action
To resolve the issue:
1. Verify that the upper threshold is set reasonably.
2. If the issue persists, contact H3C Support.
hh3cIfMonTxPauseFrameResume
Basic information
|
OID |
Event |
Type |
Severity |
Recovery notification |
Default status |
|
1.3.6.1.4.1.25506.2.40.6.0.20 |
Transmitted pause frame recovery alarm |
Informational |
- |
- |
ON |
Description
The notification is generated when the number of transmitted pause frames drops from above the upper threshold to below the lower threshold within the specified interval.
Status control
ON
CLI: snmp-agent trap enable ifmonitor tx-pause
OFF
CLI: undo snmp-agent trap enable ifmonitor tx-pause
Objects
|
OID (object name) |
Description |
Index |
Type |
Value range |
|
1.3.6.1.2.1.2.2.1.1 (ifIndex) |
Interface index. |
Yes |
Integer32 |
Standard MIB values. |
|
1.3.6.1.2.1.2.2.1.2 (ifDescr) |
Interface description. |
No |
OCTET STRING |
Unsigned32 (0..255) |
|
1.3.6.1.4.1.25506.2.40.5.2.1.1.28(hh3cIfMonTxPauseFrameHighThres) |
Upper threshold for transmitted pause frames. |
No |
Unsigned32 |
1-4294967295 |
|
1.3.6.1.4.1.25506.2.40.5.2.1.1.27(hh3cIfMonTxPauseFrameLowThres) |
Lower threshold for transmitted pause frames. |
No |
Unsigned32 |
1-4294967295 |
|
1.3.6.1.4.1.25506.2.40.5.1.1.1.10(hh3cIfMonTxPauseFrameStatistics) |
Transmitted pause frame statistics. |
No |
Counter64 |
1-4294967295 |
|
1.3.6.1.4.1.25506.2.40.5.2.1.1.29(hh3cIfMonTxPauseFrameInterval) |
Transmitted pause frame statistics collection interval. |
No |
Unsigned32 |
1-65535 |
Recommended action
No action is required.
hh3cIfMonGiantRising
Basic information
|
OID |
Event |
Type |
Severity |
Recovery notification |
Default status |
|
1.3.6.1.4.1.25506.2.40.6.0.21 |
Giant packet rising alarm |
Informational |
- |
- |
ON |
Description
The notification is generated when the number of giant packets exceeds the upper threshold within the specified interval.
Status control
ON
CLI: snmp-agent trap enable ifmonitor giant
OFF
CLI: undo snmp-agent trap enable ifmonitor giant
Objects
|
OID (object name) |
Description |
Index |
Type |
Value range |
|
1.3.6.1.2.1.2.2.1.1 (ifIndex) |
Interface index. |
Yes |
Integer32 |
Standard MIB values. |
|
1.3.6.1.2.1.2.2.1.2 (ifDescr) |
Interface description. |
No |
OCTET STRING |
Unsigned32 (0..255) |
|
1.3.6.1.4.1.25506.2.40.5.2.1.1.30(hh3cIfMonGiantLowThres) |
Lower threshold for giant packets. |
No |
Unsigned32 |
1-4294967295 |
|
1.3.6.1.4.1.25506.2.40.5.2.1.1.31(hh3cIfMonGiantHighThres) |
Upper threshold for giant packets. |
No |
Unsigned32 |
1-4294967295 |
|
1.3.6.1.4.1.25506.2.40.5.1.1.1.11(hh3cIfMonGiantStatistics) |
Giant packet statistics. |
No |
Counter64 |
1-4294967295 |
|
1.3.6.1.4.1.25506.2.40.5.2.1.1.32(hh3cIfMonGiantInterval) |
Giant packet statistics collection interval. |
No |
Unsigned32 |
1-65535 |
Recommended action
To resolve the issue:
1. Verify that the upper threshold is set reasonably.
2. If the issue persists, contact H3C Support.
hh3cIfMonGiantResume
Basic information
|
OID |
Event |
Type |
Severity |
Recovery notification |
Default status |
|
1.3.6.1.4.1.25506.2.40.6.0.22 |
Giant packet recovery alarm |
Informational |
- |
- |
ON |
Description
The notification is generated when the number of giant packets drops from above the upper threshold to below the lower threshold within the specified interval.
Status control
ON
CLI: snmp-agent trap enable ifmonitor giant
OFF
CLI: undo snmp-agent trap enable ifmonitor giant
Objects
|
OID (object name) |
Description |
Index |
Type |
Value range |
|
1.3.6.1.2.1.2.2.1.1 (ifIndex) |
Interface index. |
Yes |
Integer32 |
Standard MIB values. |
|
1.3.6.1.2.1.2.2.1.2 (ifDescr) |
Interface description. |
No |
OCTET STRING |
Unsigned32 (0..255) |
|
1.3.6.1.4.1.25506.2.40.5.2.1.1.30(hh3cIfMonGiantLowThres) |
Lower threshold for giant packets. |
No |
Unsigned32 |
1-4294967295 |
|
1.3.6.1.4.1.25506.2.40.5.2.1.1.31(hh3cIfMonGiantHighThres) |
Upper threshold for giant packets. |
No |
Unsigned32 |
1-4294967295 |
|
1.3.6.1.4.1.25506.2.40.5.1.1.1.11(hh3cIfMonGiantStatistics) |
Giant packet statistics. |
No |
Counter64 |
1-4294967295 |
|
1.3.6.1.4.1.25506.2.40.5.2.1.1.32(hh3cIfMonGiantInterval) |
Giant packet statistics collection interval. |
No |
Unsigned32 |
1-65535 |
Recommended action
No action is required.
hh3cIfMonRuntRising
Basic information
|
OID |
Event |
Type |
Severity |
Recovery notification |
Default status |
|
1.3.6.1.4.1.25506.2.40.6.0.23 |
Runt packet rising alarm |
Informational |
- |
- |
ON |
Description
The notification is generated when the number of runt packets exceeds the upper threshold within the specified interval.
Status control
ON
CLI: snmp-agent trap enable ifmonitor runt
OFF
CLI: undo snmp-agent trap enable ifmonitor runt
Objects
|
OID (object name) |
Description |
Index |
Type |
Value range |
|
1.3.6.1.2.1.2.2.1.1 (ifIndex) |
Interface index. |
Yes |
Integer32 |
Standard MIB values. |
|
1.3.6.1.2.1.2.2.1.2 (ifDescr) |
Interface description. |
No |
OCTET STRING |
Unsigned32 (0..255) |
|
1.3.6.1.4.1.25506.2.40.5.2.1.1.33(hh3cIfMonRuntLowThres) |
Lower threshold for runt packets. |
No |
Unsigned32 |
1-4294967295 |
|
1.3.6.1.4.1.25506.2.40.5.2.1.1.34(hh3cIfMonRuntHighThres) |
Upper threshold for runt packets. |
No |
Unsigned32 |
1-4294967295 |
|
1.3.6.1.4.1.25506.2.40.5.1.1.1.12(hh3cIfMonRuntStatistics) |
Runt packet statistics. |
No |
Counter64 |
1-4294967295 |
|
1.3.6.1.4.1.25506.2.40.5.2.1.1.35(hh3cIfMonRuntInterval) |
Runt packet statistics collection interval. |
No |
Unsigned32 |
1-65535 |
Recommended action
1. Verify that the upper threshold is set reasonably.
2. If the issue persists, contact H3C Support.
hh3cIfMonRuntResume
Basic information
|
OID |
Event |
Type |
Severity |
Recovery notification |
Default status |
|
1.3.6.1.4.1.25506.2.40.6.0.24 |
Runt packet recovery alarm |
Informational |
- |
- |
ON |
Description
The notification is generated when the number of runt packets drops from above the upper threshold to below the lower threshold within the specified interval.
Status control
ON
CLI: snmp-agent trap enable ifmonitor runt
OFF
CLI: undo snmp-agent trap enable ifmonitor runt
Objects
|
OID (object name) |
Description |
Index |
Type |
Value range |
|
1.3.6.1.2.1.2.2.1.1 (ifIndex) |
Interface index. |
Yes |
Integer32 |
Standard MIB values. |
|
1.3.6.1.2.1.2.2.1.2 (ifDescr) |
Interface description. |
No |
OCTET STRING |
Unsigned32 (0..255) |
|
1.3.6.1.4.1.25506.2.40.5.2.1.1.33(hh3cIfMonRuntLowThres) |
Lower threshold for runt packets. |
No |
Unsigned32 |
1-4294967295 |
|
1.3.6.1.4.1.25506.2.40.5.2.1.1.34(hh3cIfMonRuntHighThres) |
Upper threshold for runt packets. |
No |
Unsigned32 |
1-4294967295 |
|
1.3.6.1.4.1.25506.2.40.5.1.1.1.12(hh3cIfMonRuntStatistics) |
Runt packet statistics. |
No |
Counter64 |
1-4294967295 |
|
1.3.6.1.4.1.25506.2.40.5.2.1.1.35(hh3cIfMonRuntInterval) |
Runt packet statistics collection interval. |
No |
Unsigned32 |
1-65535 |
Recommended action
No action is required.
hh3cIfPfcOutRising
Basic information
|
OID |
Event |
Type |
Severity |
Recovery notification |
Default status |
|
1.3.6.1.4.1.25506.2.40.3.0.7 |
Outbound PFC frame rate rising alarm |
Informational |
- |
- |
ON |
Description
The notification is generated when the outbound PFC frame rate exceeds the early warning threshold.
Status control
This notification cannot be turned off.
Objects
|
OID (object name) |
Description |
Index |
Type |
Value range |
|
1.3.6.1.2.1.2.2.1.1 (ifIndex) |
Interface index. |
Yes |
Integer32 |
Standard MIB values. |
|
1.3.6.1.2.1.2.2.1.2 (ifDescr) |
Interface description. |
No |
OCTET STRING |
Unsigned32 (0..255) |
|
1.3.6.1.4.1.25506.2.40.2.2.5.1.1(hh3cIfPfcDot1pValue) |
Interface queue priority. |
No |
INTEGER |
0-7 |
|
1.3.6.1.4.1.25506.2.40.2.2.5.1.3(hh3cIfPfcDot1pOutPps) |
Outbound rate for a priority. |
No |
Unsigned32 |
1-4294967295 |
|
1.3.6.1.4.1.25506.2.40.2.2.5.1.5(hh3cIfPfcDot1pOutPpsThreshold) |
Outbound rate threshold for a priority. |
No |
Unsigned32 |
1-4294967295 |
Recommended action
To resolve the issue:
1. Verify that the upper threshold is set reasonably.
2. If the inbound PFC frame rate exceeds the threshold, verify that the peer device is operating properly.
3. If the outbound PFC frame rate exceeds the threshold, verify that the local device is operating properly.
4. If both the inbound PFC frame rate and outbound PFC frame rate exceed the thresholds, verify that the local device and peer device are operating properly.
5. If the issue persists, contact H3C Support.
hh3cIfInPfcRising
Basic information
|
OID |
Event |
Type |
Severity |
Recovery notification |
Default status |
|
1.3.6.1.4.1.25506.2.40.3.0.8 |
Inbound PFC frame rate rising alarm |
Informational |
- |
- |
ON |
Description
The notification is generated when the inbound PFC frame rate exceeds the early warning threshold.
Status control
This notification cannot be turned off.
Objects
|
OID (object name) |
Description |
Index |
Type |
Value range |
|
1.3.6.1.2.1.2.2.1.1 (ifIndex) |
Interface index. |
Yes |
Integer32 |
Standard MIB values. |
|
1.3.6.1.2.1.2.2.1.2 (ifDescr) |
Interface description. |
No |
OCTET STRING |
Unsigned32 (0..255) |
|
1.3.6.1.4.1.25506.2.40.2.2.5.1.1(hh3cIfPfcDot1pValue) |
Interface queue priority. |
No |
INTEGER |
0-7 |
|
1.3.6.1.4.1.25506.2.40.2.2.5.1.2(hh3cIfPfcDot1pInPps) |
Inbound rate for a priority. |
No |
Unsigned32 |
1-4294967295 |
|
1.3.6.1.4.1.25506.2.40.2.2.5.1.4(hh3cIfPfcDot1pInPpsThreshold) |
Inbound rate threshold for a priority. |
No |
Unsigned32 |
1-4294967295 |
Recommended action
To resolve the issue:
1. Verify that the upper threshold is set reasonably.
2. If the inbound PFC frame rate exceeds the threshold, verify that the peer device is operating properly.
3. If the outbound PFC frame rate exceeds the threshold, verify that the local device is operating properly.
4. If both the inbound PFC frame rate and outbound PFC frame rate exceed the thresholds, verify that the local device and peer device are operating properly.
5. If the issue persists, contact H3C Support.
