Login
- Table of Contents
-
- 03-Layer 2-LAN Switching Command Reference
- 00-Preface
- 01-Ethernet interface commands
- 02-Loopback, null, and inloopback interface commands
- 03-Bulk interface commands
- 04-MAC address table commands
- 05-Ethernet link aggregation commands
- 06-Port isolation commands
- 07-Spanning tree commands
- 08-Loop detection commands
- 09-VLAN commands
- 10-MVRP commands
- 11-VLAN mapping commands
- 12-LLDP commands
- 13-Service loopback group commands
- 14-Cut-through forwarding commands
- 15-DRNI commands
- Related Documents
-
14-Cut-through forwarding commands
| Title | Size | Download |
|---|---|---|
| 14-Cut-through forwarding commands | 32.45 KB |
Cut-through forwarding commands
Cut-through forwarding is available only on S12500X-AF H cards.
cut-through enable
Use cut-through enable to enable cut-through forwarding.
Use undo cut-through enable to disable cut-through forwarding.
Syntax
cut-through enable
undo cut-through enable
Default
Cut-through forwarding is disabled.
Views
System view
Predefined user roles
network-admin
mdc-admin
Examples
# Enable cut-through forwarding on the device.
<Sysname> system-view
[Sysname] cut-through enable
