Login
- Table of Contents
- Related Documents
-
| Title | Size | Download |
|---|---|---|
| 03-Appendix B LEDs | 1.33 MB |
1 Appendix B LEDs
F1000-AI-03
Figure1-1 LEDs
|
(1) 10/100/1000BASE-T copper port LEDs |
(2) 4G module LED |
|
(3) System status LED |
(4) Power status LED |
|
(5) Combo interface LEDs |
|
Table1-1 LED description
|
LED |
Mark |
Status |
Description |
|
10/100/1000BASE-T copper port LED |
10/100/1000BASE-T |
Off |
No link is present. |
|
Steady green |
A link is present. |
||
|
Flashing green |
The port is receiving and sending data. |
||
|
4G module LED (available only on the F100-C-A6-WL firewall) |
LTE |
Off |
The 4G module is faulty or in airplane mode. |
|
Flashing green (1 Hz) |
The 4G module is searching for a network. |
||
|
Flashing green (0.3 Hz) |
The 4G module has connected to a network. |
||
|
Flashing green (2.5 Hz) |
The 4G module is transmitting data. |
||
|
System status LED |
SYS |
Off |
The firewall is not powered on or has failed. |
|
Slow flashing green |
The firewall is operating correctly. |
||
|
Fast flashing green |
The firewall is loading software. |
||
|
Power status LED |
PWR0, PWR1 |
Off |
No power supply is present or the power supply has failed. |
|
Steady green |
The power supply is operating correctly. |
||
|
10/100/1000BASE-T copper port LED(combo interfaces) |
10/100/1000BASE-T |
Off |
No link is present. |
|
Steady green |
A link is present. |
||
|
Flashing green |
The port is receiving and sending data. |
||
|
1000BASE-X fiber port LED(combo interfaces) |
1000BASE-X |
Off |
No link is present. |
|
Steady green |
A 1000 Mbps link is present. |
||
|
Flashing green |
The port is receiving and sending data at 1000 Mbps. |
F1000-AI-10
Figure1-2 LEDs
|
(1) 10/100/1000BASE-T copper port LED |
(2) 10/100/1000BASE-T copper port LED (combo interfaces) |
|
(3) 1000BASE-X fiber port LED (combo interfaces) |
(4) System status LED |
|
(5) Power status LED |
(6) 10GBASE-R fiber port LEDs |
Table1-2 LED description
|
LED |
Mark |
Status |
Description |
|
10/100/1000BASE-T copper port LED |
10/100/1000BASE-T |
Off |
No link is present. |
|
Steady green |
A link is present. |
||
|
Flashing green |
The port is receiving and sending data. |
||
|
10/100/1000BASE-T copper port LED (combo interfaces) |
10/100/1000BASE-T |
Off |
No link is present. |
|
Steady green |
A link is present. |
||
|
Flashing green |
The port is receiving and sending data. |
||
|
1000BASE-X fiber port LED (combo interfaces) |
1000BASE-X |
Off |
No link is present. |
|
Steady green |
A 1000 Mbps link is present. |
||
|
Flashing green |
The port is receiving and sending data at 1000 Mbps. |
||
|
System status LED |
SYS |
Off |
The firewall is not powered on or has failed. |
|
Slow flashing green |
The firewall is operating correctly. |
||
|
Fast flashing green |
The firewall is loading software. |
||
|
Power status LED |
PWR0, PWR1 |
Off |
No power supply is present or the power supply has failed. |
|
Steady green |
The power supply is operating correctly. |
||
|
10GBASE-R fiber port LEDs |
10GBASE-R |
Off |
No link is present. |
|
Steady green |
A 10 Gbps link is present. |
||
|
Flashing green |
The port is receiving and sending data at 10 Gbps. |
F1000-AI-20/F1000-AI-30/F1000-AI-50
The F1000-AI-20, F1000-AI-30, and F1000-AI-50 firewalls use similar LEDs. This section uses the LEDs on the F1000-AI-20 firewall as an example.
Figure1-3 LEDs
|
(1) System status LED |
(2) Drive status LED |
|
(3) Power status LEDs |
(4) 10/100/1000BASE-T copper port LED |
|
(5) 1000BASE-X fiber port LED |
(6) 10GBASE-R fiber port LEDs |
|
(6) Interface module status LEDs |
|
Table1-3 LED description
|
LED |
Mark |
Status |
Description |
|
System status LED |
SYS |
Off |
The firewall is not powered on or has failed. |
|
Slow flashing green |
The firewall is operating correctly. |
||
|
Fast flashing green |
The firewall is loading software. |
||
|
Drive status LED |
HD0, HD1 |
Off |
The firewall is not powered on or has failed. |
|
Fast flashing green |
Data is being read from or written to the drive. |
||
|
Steady green |
The drive is present and operating correctly. |
||
|
Power status LED |
PWR0, PWR1 |
Off |
No power supply is present or the power supply has failed. |
|
Steady green |
The power supply is operating correctly. |
||
|
10/100/1000BASE-T copper port LED |
10/100/1000BASE-T |
Off |
No link is present. |
|
Steady green |
A link is present. |
||
|
Flashing green |
The port is receiving and sending data. |
||
|
1000BASE-X fiber port LED |
1000BASE-X |
Off |
No link is present. |
|
Steady green |
A 1000 Mbps link is present. |
||
|
Flashing green |
The port is receiving and sending data at 1000 Mbps. |
||
|
10GBASE-R fiber port LEDs |
10GBASE-R |
Off |
No link is present. |
|
Steady green |
A 10 Gbps link is present. |
||
|
Flashing green |
The port is receiving and sending data at 10 Gbps. |
||
|
Interface module LED |
SLOT1, SLOT2 |
Off |
No interface module is present or the interface module has failed. |
|
Steady green |
The interface module is operating correctly. |
F1000-AI-60/F1000-AI-70/F1000-AI-80/F1000-AI-90
The F1000-AI-60, F1000-AI-70, F1000-AI-80 and F1000-AI-90 firewalls use similar LEDs. This section uses the LEDs on the F1000-AI-90 firewall as an example.
Figure1-4 LEDs
|
(1) 10/100/1000BASE-T copper port LED |
(2) Ethernet fiber port LED |
|
(3) System status LED |
(4) Power status LEDs |
|
(5) Interface module status LEDs |
|
Table1-4 LED description
|
LED |
Mark |
Status |
Description |
|
10/100/1000BASE-T copper port LED |
10/100/1000BASE-T |
Off |
No link is present. |
|
Steady green |
A link is present. |
||
|
Flashing green |
The port is receiving and sending data. |
||
|
Ethernet fiber port LED |
1000BASE-X |
Off |
No link is present. |
|
Steady green |
A 1000 Mbps link is present. |
||
|
Flashing green |
The port is receiving and sending data at 1000 Mbps. |
||
|
10GBASE-R |
Off |
No link is present. |
|
|
Steady green |
A 10 Gbps link is present. |
||
|
Flashing green |
The port is receiving and sending data at 10 Gbps. |
||
|
System status LED |
SYS |
Off |
The firewall is not powered on or has failed. |
|
Slow flashing green |
The firewall is operating correctly. |
||
|
Fast flashing green |
The firewall is loading software. |
||
|
Power status LED |
PWR0, PWR1 |
Off |
No power supply is present or the power supply has failed. |
|
Steady green |
The power supply is operating correctly. |
||
|
Interface module status LED |
SLOT1, SLOT2, SLOT 3, SLOT 4 |
Off |
No interface module is present or the interface module has failed. |
|
Steady green |
The interface module is operating correctly. |
