Contents

Configuring session-based NetStream·· 1

About session-based NetStream·· 1

Session-based NetStream aggregation modes· 1

Session-based NetStream data export 1

Restrictions: Hardware compatibility with session-based NetStream·· 1

Restrictions and guidelines: Session-based NetStream configuration· 2

Procedure· 2

Display and maintenance commands session-based NetStream·· 3

Configuring session-based NetStream

About session-based NetStream

Session-based NetStream provides statistics for session-based services and exports the statistics in NetStream v9 format to NetStream servers.

For information about sessions, see session management in Security Configuration Guide.

Session-based NetStream aggregation modes

Session-based NetStream aggregates session statistics according to the aggregation criteria of an aggregation mode and exports the statistics to NetStream servers.

Table 1 lists the available aggregation modes. In each mode, the system merges statistics for multiple sessions if each aggregation criterion is of the same value.

Table 1 Session-based NetStream aggregation modes

‌

Session-based NetStream data export

Session-based NetStream uses an aging mechanism to export flow entry statistics to NetStream servers.

When the aging timer for a session-based NetStream entry expires, statistics about the entry is cleared from the cache and exported to the NetStream servers.

When the session-based NetStream cache is full, the device stops generating new flow entries. Statistics collection for existing flow entries is not affected.

A session-based NetStream entry is also exported in the following situations:

·     The session itself ages out.

·     The session is manually deleted by the administrator.

Restrictions: Hardware compatibility with session-based NetStream

‌

Restrictions and guidelines: Session-based NetStream configuration

For session-based NetStream to work, DPI must be enabled on the device. For more information about DPI, see DPI Configuration Guide.

Procedure

1.     Enter system view.

system-view

2.     Enable session-based NetStream.

session-based netstream enable

By default, session-based NetStream is disabled.

3.     Enable session-based NetStream aggregation modes.

session-based netstream aggregation { app | app-profile | app-user } *

By default, all session-based NetStream aggregation modes are disabled.

4.     Specify a destination host for session-based NetStream data export.

session-based netstream export host ip-address udp-port [ vpn-instance vpn-instance-name ]

By default, no destination host is specified for session-based NetStream data export.

5.     (Optional.) Specify a source IP address for session-based NetStream packets.

session-based netstream export source ip ip-address

By default, the source IP address of session-based NetStream packets is the primary IP address of the output interface.

6.     (Optional.) Set the aging timer for cached session-based NetStream entries.

session-based netstream timeout minutes

By default, a session-based NetStream entry is can be cached for 5 minutes before being aged out.

Display and maintenance commands session-based NetStream

Execute display commands in any view.

‌