Login
- Table of Contents
-
- 17-Network Management and Monitoring Command Reference
- 00-Preface
- 01-Information center commands
- 02-Flow log commands
- 03-Fast log output commands
- 04-NetStream commands
- 05-Cloud connection commands
- 06-Mirroring commands
- 07-Packet capture commands
- 08-NQA commands
- 09-Track commands
- 10-BFD commands
- 11-Monitor Link commands
- 12-Smart Link commands
- 13-Interface backup commands
- 14-Interface collaboration commands
- 15-System maintenance and debugging commands
- 16-NTP commands
- 17-EAA commands
- 18-Process monitoring and maintenance commands
- 19-NETCONF commands
- 20-SNMP commands
- 21-RMON commands
- 22-Event MIB commands
- 23-CWMP commands
- 24-Process placement commands
- Related Documents
-
| Title | Size | Download |
|---|---|---|
| 06-Mirroring commands | 97.82 KB |
mirroring-group mirroring-port (interface view)
mirroring-group mirroring-port (system view)
mirroring-group monitor-port (interface view)
mirroring-group monitor-port (system view)
Port mirroring commands
The following compatibility matrixes show the support of hardware platforms for port mirroring:
|
F1000 series |
Models |
Feature compatibility |
|
F1000-X-G5 series |
F1000-A-G5, F1000-S-G5 |
Yes only on GE 1/0/0 through GE 1/0/23, XGE 1/0/24, and XGE 1/0/25 |
|
F1000-C-G5, F1000-C-G5-LI |
Yes only on GE 1/0/0 through GE1/0/23, GE 1/0/25, XGE 1/0/26, and XGE 1/0/27 |
|
|
F1000-E-G5, F1000-H-G5 |
Yes only on GE 1/0/0 through GE 1/0/13, XGE 1/0/18, XGE 1/0/19, GE 1/0/22 through GE 1/0/29, and interfaces on cards in four interface card slots |
|
|
F1000-X-G3 series |
F1000-A-G3, F1000-C-G3, F1000-E-G3, F1000-S-G3 |
Yes only on GE 1/0/0 through GE 1/0/13, XGE 1/0/18, XGE 1/0/19, GE 1/0/22 through GE 1/0/29, and interfaces on cards in four interface card slots |
|
F1000-X-G2 series |
F1000-A-G2, F1000-C-G2, F1000-E-G2, F1000-S-G2 |
Yes |
|
F1000-9X0-AI series |
F1000-9390-AI, F1000-9385-AI |
Yes only on GE 1/0/0 through GE 1/0/13, XGE 1/0/18, XGE 1/0/19, GE 1/0/22 through GE 1/0/29, and interfaces on cards in four interface card slots |
|
F1000-9380-AI, F1000-9370-AI |
Yes only on GE 1/0/0 through GE 1/0/23, XGE 1/0/24, and XGE 1/0/25 |
|
|
F1000-9360-AI, F1000-9350-AI |
Yes only on GE 1/0/0 through GE1/0/23, GE 1/0/25, XGE 1/0/26, and XGE 1/0/27 |
|
|
F1000-990-AI, F1000-980-AI, F1000-970-AI, F1000-960-AI, F1000-950-AI, F1000-930-AI, F1000-920-AI |
Yes |
|
|
F1000-9330-AI, F1000-9320-AI, F1000-910-AI, F1000-905-AI |
No |
|
|
F1000-C83X0 series |
F1000-C8395 |
Yes only on GE 1/0/0 through GE 1/0/13, XGE 1/0/18, XGE 1/0/19, GE 1/0/22 through GE 1/0/29, and interfaces on cards in four interface card slots |
|
F1000-C8390, F1000-C8385, F1000-C8380 |
Yes only on GE 1/0/0 through GE 1/0/23, XGE 1/0/24, and XGE 1/0/25 |
|
|
F1000-C8370, F1000-C8360, F1000-C8350 |
Yes only on GE 1/0/0 through GE1/0/23, GE 1/0/25, XGE 1/0/26, and XGE 1/0/27 |
|
|
F1000-C8330 |
No |
|
|
F1000-C81X0 series |
F1000-C8180, F1000-C8170, F1000-C8160 |
Yes |
|
F1000-C8150, F1000-C8130, F1000-C8120, F1000-C8110 |
No |
|
|
F1000-7X0-HI series |
F1000-770-HI |
Yes only on GE 1/0/0 through GE 1/0/23, XGE 1/0/24, and XGE 1/0/25 |
|
F1000-750-HI, F1000-740-HI |
Yes only on GE 1/0/0 through GE1/0/23, GE 1/0/25, XGE 1/0/26, and XGE 1/0/27 |
|
|
F1000-730-HI, F1000-720-HI, F1000-710-HI |
No |
|
|
F1000-C-X series |
F1000-C-EI, F1000-C-HI |
Yes |
|
F1000-C-XI |
Yes only on GE 1/0/0 through GE 1/0/23, XGE 1/0/24, and XGE 1/0/25 |
|
|
F1000-E-XI |
Yes only on GE 1/0/0 through GE1/0/23, GE 1/0/25, XGE 1/0/26, and XGE 1/0/27 |
|
|
F1000-V series |
F1000-E-VG |
Yes |
|
F1000-S-VG |
No |
|
|
SecBlade IV |
LSPM6FWD8, LSQM2FWDSC8 |
No |
|
F100 series |
Models |
Feature compatibility |
|
F100-X-G5 series |
F100-A-G5, F100-C-G5, F100-M-G5, F100-S-G5 |
No |
|
F100-E-G5 |
Yes only on GE 1/0/0 through GE1/0/23, GE 1/0/25, XGE 1/0/26, and XGE 1/0/27 |
|
|
F100-X-G3 series |
F100-A-G3, F100-E-G3 |
Yes |
|
F100-C-G3, F100-M-G3, F100-S-G3 |
No |
|
|
F100-X-G2 series |
F100-A-G2, F100-E-G2 |
Yes |
|
F100-C-G2, F100-M-G2, F100-S-G2 |
No |
|
|
F100-WiNet series |
F100-A80-WiNet |
Yes |
|
F100-C80-WiNet, F100-C60-WiNet, F100-C50-WiNet, F100-S80-WiNet, F100-A81-WiNet |
No |
|
|
F100-A91-WiNet |
Yes only on GE 1/0/0 through GE1/0/23, GE 1/0/25, XGE 1/0/26, and XGE 1/0/27 |
|
|
F100-C-A series |
F100-C-A6, F100-C-A5, F100-C-A3, F100-C-A6-WL, F100-C-A5-W, F100-C-A3-W |
No |
|
F100-X-XI series |
F100-A-EI, F100-A-HI, F100-A-SI, F100-E-EI |
Yes |
|
F100-C-EI, F100-C-HI, F100-C-XI, F100-S-HI, F100-S-XI |
No |
display mirroring-group
Use display mirroring-group to display mirroring group information.
Syntax
display mirroring-group { group-id | all | local }
Views
Any view
Predefined user roles
network-admin
network-operator
context-admin
context-operator
Parameters
group-id: Specifies a mirroring group by its ID.
The following compatibility matrixes show the value ranges for the mirroring group ID:
|
F1000 series |
Models |
Value range |
|
F1000-X-G5 series |
F1000-A-G5, F1000-E-G5, F1000-H-G5, F1000-S-G5 |
1 and 2 |
|
F1000-C-G5, F1000-C-G5-LI |
1 |
|
|
F1000-X-G3 series |
F1000-A-G3, F1000-C-G3, F1000-E-G3, F1000-S-G3 |
1 and 2 |
|
F1000-X-G2 series |
F1000-A-G2, F1000-C-G2, F1000-E-G2, F1000-S-G2 |
1 and 2 |
|
F1000-9X0-AI series |
F1000-9390-AI, F1000-9385-AI, F1000-9380-AI, F1000-9370-AI, F1000-990-AI, F1000-980-AI, F1000-970-AI, F1000-960-AI, F1000-950-AI, F1000-930-AI, F1000-920-AI , F1000-910-AI, F1000-905-AI |
1 and 2 |
|
F1000-9360-AI, F1000-9350-AI, F1000-9330-AI, F1000-9320-AI |
1 |
|
|
F1000-C83X0 series |
F1000-C8395, F1000-C8390, F1000-C8385, F1000-C8380 |
1 and 2 |
|
F1000-C8370, F1000-C8360, F1000-C8350, F1000-C8330 |
1 |
|
|
F1000-C81X0 series |
F1000-C8180, F1000-C8170, F1000-C8160, F1000-C8150, F1000-C8130, F1000-C8120, F1000-C8110 |
1 and 2 |
|
F1000-7X0-HI series |
F1000-770-HI, F1000-720-HI, F1000-710-HI |
1 and 2 |
|
F1000-750-HI, F1000-740-HI, F1000-730-HI |
1 |
|
|
F1000-C-X series |
F1000-C-EI, F1000-C-HI, F1000-C-XI |
1 and 2 |
|
F1000-E-XI |
1 |
|
|
F1000-V series |
F1000-E-VG, F1000-S-VG |
1 and 2 |
|
SecBlade IV |
LSPM6FWD8, LSQM2FWDSC8 |
1 and 2 |
|
F100 series |
Models |
Value range |
|
F100-X-G5 series |
F100-A-G5, F100-E-G5 |
1 |
|
F100-C-G5, F100-M-G5, F100-S-G5 |
1 and 2 |
|
|
F100-X-G3 series |
F100-A-G3, F100-C-G3, F100-E-G3, F100-M-G3, F100-S-G3 |
1 and 2 |
|
F100-X-G2 series |
F100-A-G2, F100-C-G2, F100-E-G2, F100-M-G2, F100-S-G2 |
1 and 2 |
|
F100-WiNet series |
F100-A80-WiNet, F100-C80-WiNet, F100-C60-WiNet, F100-C50-WiNet, F100-S80-WiNet |
1 and 2 |
|
F100-A81-WiNet, F100-A91-WiNet |
1 |
|
|
F100-C-A series |
F100-C-A6, F100-C-A5, F100-C-A3, F100-C-A6-WL, F100-C-A5-W, F100-C-A3-W |
1 and 2 |
|
F100-X-XI series |
F100-A-EI, F100-A-HI, F100-A-SI, F100-C-EI, F100-C-HI, F100-C-XI, F100-E-EI, F100-S-HI, F100-S-XI |
1 and 2 |
all: Specifies all mirroring groups.
local: Specifies local mirroring groups.
Usage guidelines
Mirroring group information includes the type, status, and content of a mirroring group. It is sorted by mirroring group number.
Examples
# Display information about all mirroring groups.
<Sysname> display mirroring-group all
Mirroring group 1:
Type: Local
Status: Active
Mirroring port:
GigabitEthernet1/0/1 Inbound
Monitor port: GigabitEthernet1/0/2
Table 1 Command output
|
Field |
Description |
|
Mirroring group |
ID of the mirroring group. |
|
Type |
Type of the mirroring group: Local. |
|
Status |
Status of the mirroring group: · Active—The mirroring group has taken effect. · Incomplete—The mirroring group configuration is not complete and does not take effect. |
|
Mirroring port |
Source port. |
|
Monitor port |
Destination port. |
mirroring-group
Use mirroring-group to create a mirroring group.
Use undo mirroring-group to delete mirroring groups.
Syntax
mirroring-group group-id local
undo mirroring-group { group-id | all | local }
Default
No mirroring groups exist.
Views
System view
Predefined user roles
network-admin
context-admin
Parameters
group-id: Specifies a mirroring group ID.
The following compatibility matrixes show the value ranges for the mirroring group ID:
|
F1000 series |
Models |
Value range |
|
F1000-X-G5 series |
F1000-A-G5, F1000-E-G5, F1000-H-G5, F1000-S-G5 |
1 and 2 |
|
F1000-C-G5, F1000-C-G5-LI |
1 |
|
|
F1000-X-G3 series |
F1000-A-G3, F1000-C-G3, F1000-E-G3, F1000-S-G3 |
1 and 2 |
|
F1000-X-G2 series |
F1000-A-G2, F1000-C-G2, F1000-E-G2, F1000-S-G2 |
1 and 2 |
|
F1000-9X0-AI series |
F1000-9390-AI, F1000-9385-AI, F1000-9380-AI, F1000-9370-AI, F1000-990-AI, F1000-980-AI, F1000-970-AI, F1000-960-AI, F1000-950-AI, F1000-930-AI, F1000-920-AI , F1000-910-AI, F1000-905-AI |
1 and 2 |
|
F1000-9360-AI, F1000-9350-AI, F1000-9330-AI, F1000-9320-AI |
1 |
|
|
F1000-C83X0 series |
F1000-C8395, F1000-C8390, F1000-C8385, F1000-C8380 |
1 and 2 |
|
F1000-C8370, F1000-C8360, F1000-C8350, F1000-C8330 |
1 |
|
|
F1000-C81X0 series |
F1000-C8180, F1000-C8170, F1000-C8160, F1000-C8150, F1000-C8130, F1000-C8120, F1000-C8110 |
1 and 2 |
|
F1000-7X0-HI series |
F1000-770-HI, F1000-720-HI, F1000-710-HI |
1 and 2 |
|
F1000-750-HI, F1000-740-HI, F1000-730-HI |
1 |
|
|
F1000-C-X series |
F1000-C-EI, F1000-C-HI, F1000-C-XI |
1 and 2 |
|
F1000-E-XI |
1 |
|
|
F1000-V series |
F1000-E-VG, F1000-S-VG |
1 and 2 |
|
SecBlade IV |
LSPM6FWD8, LSQM2FWDSC8 |
1 and 2 |
|
F100 series |
Models |
Value range |
|
F100-X-G5 series |
F100-A-G5, F100-E-G5 |
1 |
|
F100-C-G5, F100-M-G5, F100-S-G5 |
1 and 2 |
|
|
F100-X-G3 series |
F100-A-G3, F100-C-G3, F100-E-G3, F100-M-G3, F100-S-G3 |
1 and 2 |
|
F100-X-G2 series |
F100-A-G2, F100-C-G2, F100-E-G2, F100-M-G2, F100-S-G2 |
1 and 2 |
|
F100-WiNet series |
F100-A80-WiNet, F100-C80-WiNet, F100-C60-WiNet, F100-C50-WiNet, F100-S80-WiNet |
1 and 2 |
|
F100-A81-WiNet, F100-A91-WiNet |
1 |
|
|
F100-C-A series |
F100-C-A6, F100-C-A5, F100-C-A3, F100-C-A6-WL, F100-C-A5-W, F100-C-A3-W |
1 and 2 |
|
F100-X-XI series |
F100-A-EI, F100-A-HI, F100-A-SI, F100-C-EI, F100-C-HI, F100-C-XI, F100-E-EI, F100-S-HI, F100-S-XI |
1 and 2 |
local: Specifies local mirroring groups.
all: Specifies all mirroring groups.
Examples
# Create local mirroring group 1.
<Sysname> system-view
[Sysname] mirroring-group 1 local
mirroring-group mirroring-port (interface view)
Use mirroring-group mirroring-port to configure a port as a source port for a mirroring group.
Use undo mirroring-group mirroring-port to restore the default.
Syntax
mirroring-group group-id mirroring-port { both | inbound | outbound }
undo mirroring-group group-id mirroring-port
Default
A port does not act as a source port for any mirroring groups.
Views
Interface view
Predefined user roles
network-admin
context-admin
Parameters
group-id: Specifies a mirroring group by its ID.
The following compatibility matrixes show the value ranges for the mirroring group ID:
|
F1000 series |
Models |
Value range |
|
F1000-X-G5 series |
F1000-A-G5, F1000-E-G5, F1000-H-G5, F1000-S-G5 |
1 and 2 |
|
F1000-C-G5, F1000-C-G5-LI |
1 |
|
|
F1000-X-G3 series |
F1000-A-G3, F1000-C-G3, F1000-E-G3, F1000-S-G3 |
1 and 2 |
|
F1000-X-G2 series |
F1000-A-G2, F1000-C-G2, F1000-E-G2, F1000-S-G2 |
1 and 2 |
|
F1000-9X0-AI series |
F1000-9390-AI, F1000-9385-AI, F1000-9380-AI, F1000-9370-AI, F1000-990-AI, F1000-980-AI, F1000-970-AI, F1000-960-AI, F1000-950-AI, F1000-930-AI, F1000-920-AI , F1000-910-AI, F1000-905-AI |
1 and 2 |
|
F1000-9360-AI, F1000-9350-AI, F1000-9330-AI, F1000-9320-AI |
1 |
|
|
F1000-C83X0 series |
F1000-C8395, F1000-C8390, F1000-C8385, F1000-C8380 |
1 and 2 |
|
F1000-C8370, F1000-C8360, F1000-C8350, F1000-C8330 |
1 |
|
|
F1000-C81X0 series |
F1000-C8180, F1000-C8170, F1000-C8160, F1000-C8150, F1000-C8130, F1000-C8120, F1000-C8110 |
1 and 2 |
|
F1000-7X0-HI series |
F1000-770-HI, F1000-720-HI, F1000-710-HI |
1 and 2 |
|
F1000-750-HI, F1000-740-HI, F1000-730-HI |
1 |
|
|
F1000-C-X series |
F1000-C-EI, F1000-C-HI, F1000-C-XI |
1 and 2 |
|
F1000-E-XI |
1 |
|
|
F1000-V series |
F1000-E-VG, F1000-S-VG |
1 and 2 |
|
SecBlade IV |
LSPM6FWD8, LSQM2FWDSC8 |
1 and 2 |
|
F100 series |
Models |
Value range |
|
F100-X-G5 series |
F100-A-G5, F100-E-G5 |
1 |
|
F100-C-G5, F100-M-G5, F100-S-G5 |
1 and 2 |
|
|
F100-X-G3 series |
F100-A-G3, F100-C-G3, F100-E-G3, F100-M-G3, F100-S-G3 |
1 and 2 |
|
F100-X-G2 series |
F100-A-G2, F100-C-G2, F100-E-G2, F100-M-G2, F100-S-G2 |
1 and 2 |
|
F100-WiNet series |
F100-A80-WiNet, F100-C80-WiNet, F100-C60-WiNet, F100-C50-WiNet, F100-S80-WiNet |
1 and 2 |
|
F100-A81-WiNet, F100-A91-WiNet |
1 |
|
|
F100-C-A series |
F100-C-A6, F100-C-A5, F100-C-A3, F100-C-A6-WL, F100-C-A5-W, F100-C-A3-W |
1 and 2 |
|
F100-X-XI series |
F100-A-EI, F100-A-HI, F100-A-SI, F100-C-EI, F100-C-HI, F100-C-XI, F100-E-EI, F100-S-HI, F100-S-XI |
1 and 2 |
both: Mirrors both received and sent packets.
inbound: Mirrors only received packets.
outbound: Mirrors only sent packets.
Usage guidelines
A Layer 2 or Layer 3 aggregate interface cannot be configured as a source port for a mirroring group.
A source port cannot be used as a monitor port.
Examples
# Create local mirroring group 1 to monitor the bidirectional traffic of port GigabitEthernet 1/0/1.
<Sysname> system-view
[Sysname] mirroring-group 1 local
[Sysname] interface gigabitethernet 1/0/1
[Sysname-GigabitEthernet1/0/1] mirroring-group 1 mirroring-port both
Related commands
mirroring-group
mirroring-group mirroring-port (system view)
Use mirroring-group mirroring-port to configure source ports for a mirroring group.
Use undo mirroring-group mirroring-port to remove source ports from a mirroring group.
Syntax
mirroring-group group-id mirroring-port interface-list { both | inbound | outbound }
undo mirroring-group group-id mirroring-port interface-list
Default
No source port is configured for a mirroring group.
Views
System view
Predefined user roles
network-admin
context-admin
Parameters
group-id: Specifies a mirroring group by its ID.
The following compatibility matrixes show the value ranges for the mirroring group ID:
|
F1000 series |
Models |
Value range |
|
F1000-X-G5 series |
F1000-A-G5, F1000-E-G5, F1000-H-G5, F1000-S-G5 |
1 and 2 |
|
F1000-C-G5, F1000-C-G5-LI |
1 |
|
|
F1000-X-G3 series |
F1000-A-G3, F1000-C-G3, F1000-E-G3, F1000-S-G3 |
1 and 2 |
|
F1000-X-G2 series |
F1000-A-G2, F1000-C-G2, F1000-E-G2, F1000-S-G2 |
1 and 2 |
|
F1000-9X0-AI series |
F1000-9390-AI, F1000-9385-AI, F1000-9380-AI, F1000-9370-AI, F1000-990-AI, F1000-980-AI, F1000-970-AI, F1000-960-AI, F1000-950-AI, F1000-930-AI, F1000-920-AI , F1000-910-AI, F1000-905-AI |
1 and 2 |
|
F1000-9360-AI, F1000-9350-AI, F1000-9330-AI, F1000-9320-AI |
1 |
|
|
F1000-C83X0 series |
F1000-C8395, F1000-C8390, F1000-C8385, F1000-C8380 |
1 and 2 |
|
F1000-C8370, F1000-C8360, F1000-C8350, F1000-C8330 |
1 |
|
|
F1000-C81X0 series |
F1000-C8180, F1000-C8170, F1000-C8160, F1000-C8150, F1000-C8130, F1000-C8120, F1000-C8110 |
1 and 2 |
|
F1000-7X0-HI series |
F1000-770-HI, F1000-720-HI, F1000-710-HI |
1 and 2 |
|
F1000-750-HI, F1000-740-HI, F1000-730-HI |
1 |
|
|
F1000-C-X series |
F1000-C-EI, F1000-C-HI, F1000-C-XI |
1 and 2 |
|
F1000-E-XI |
1 |
|
|
F1000-V series |
F1000-E-VG, F1000-S-VG |
1 and 2 |
|
SecBlade IV |
LSPM6FWD8, LSQM2FWDSC8 |
1 and 2 |
|
F100 series |
Models |
Value range |
|
F100-X-G5 series |
F100-A-G5, F100-E-G5 |
1 |
|
F100-C-G5, F100-M-G5, F100-S-G5 |
1 and 2 |
|
|
F100-X-G3 series |
F100-A-G3, F100-C-G3, F100-E-G3, F100-M-G3, F100-S-G3 |
1 and 2 |
|
F100-X-G2 series |
F100-A-G2, F100-C-G2, F100-E-G2, F100-M-G2, F100-S-G2 |
1 and 2 |
|
F100-WiNet series |
F100-A80-WiNet, F100-C80-WiNet, F100-C60-WiNet, F100-C50-WiNet, F100-S80-WiNet |
1 and 2 |
|
F100-A81-WiNet, F100-A91-WiNet |
1 |
|
|
F100-C-A series |
F100-C-A6, F100-C-A5, F100-C-A3, F100-C-A6-WL, F100-C-A5-W, F100-C-A3-W |
1 and 2 |
|
F100-X-XI series |
F100-A-EI, F100-A-HI, F100-A-SI, F100-C-EI, F100-C-HI, F100-C-XI, F100-E-EI, F100-S-HI, F100-S-XI |
1 and 2 |
interface-list: Specifies a space-separated list of up to eight interface items. Each item specifies an interface by its type and number or specifies a range of interfaces in the form of interface-type interface-number1 to interface-type interface-number2. When you specify a range of interfaces, the interfaces must be of the same type and on the same slot. The start interface number must be identical to or lower than the end interface number.
both: Mirrors both received and sent packets.
inbound: Mirrors only received packets.
outbound: Mirrors only sent packets.
Usage guidelines
A Layer 2 or Layer 3 aggregate interface cannot be configured as a source port for a mirroring group.
A source port cannot be used as a monitor port.
Examples
# Create local mirroring group 1 to monitor the bidirectional traffic of GigabitEthernet 1/0/1.
<Sysname> system-view
[Sysname] mirroring-group 1 local
[Sysname] mirroring-group 1 mirroring-port gigabitethernet 1/0/1 both
mirroring-group
mirroring-group monitor-port (interface view)
Use mirroring-group monitor-port to configure a port as the monitor port for a mirroring group.
Use undo mirroring-group monitor-port to restore the default.
Syntax
mirroring-group group-id monitor-port
undo mirroring-group group-id monitor-port
Default
A port does not act as the monitor port for any mirroring groups.
Views
Interface view
Predefined user roles
network-admin
context-admin
Parameters
group-id: Specifies a mirroring group by its ID.
The following compatibility matrixes show the value ranges for the mirroring group ID:
|
F1000 series |
Models |
Value range |
|
F1000-X-G5 series |
F1000-A-G5, F1000-E-G5, F1000-H-G5, F1000-S-G5 |
1 and 2 |
|
F1000-C-G5, F1000-C-G5-LI |
1 |
|
|
F1000-X-G3 series |
F1000-A-G3, F1000-C-G3, F1000-E-G3, F1000-S-G3 |
1 and 2 |
|
F1000-X-G2 series |
F1000-A-G2, F1000-C-G2, F1000-E-G2, F1000-S-G2 |
1 and 2 |
|
F1000-9X0-AI series |
F1000-9390-AI, F1000-9385-AI, F1000-9380-AI, F1000-9370-AI, F1000-990-AI, F1000-980-AI, F1000-970-AI, F1000-960-AI, F1000-950-AI, F1000-930-AI, F1000-920-AI , F1000-910-AI, F1000-905-AI |
1 and 2 |
|
F1000-9360-AI, F1000-9350-AI, F1000-9330-AI, F1000-9320-AI |
1 |
|
|
F1000-C83X0 series |
F1000-C8395, F1000-C8390, F1000-C8385, F1000-C8380 |
1 and 2 |
|
F1000-C8370, F1000-C8360, F1000-C8350, F1000-C8330 |
1 |
|
|
F1000-C81X0 series |
F1000-C8180, F1000-C8170, F1000-C8160, F1000-C8150, F1000-C8130, F1000-C8120, F1000-C8110 |
1 and 2 |
|
F1000-7X0-HI series |
F1000-770-HI, F1000-720-HI, F1000-710-HI |
1 and 2 |
|
F1000-750-HI, F1000-740-HI, F1000-730-HI |
1 |
|
|
F1000-C-X series |
F1000-C-EI, F1000-C-HI, F1000-C-XI |
1 and 2 |
|
F1000-E-XI |
1 |
|
|
F1000-V series |
F1000-E-VG, F1000-S-VG |
1 and 2 |
|
SecBlade IV |
LSPM6FWD8, LSQM2FWDSC8 |
1 and 2 |
|
F100 series |
Models |
Value range |
|
F100-X-G5 series |
F100-A-G5, F100-E-G5 |
1 |
|
F100-C-G5, F100-M-G5, F100-S-G5 |
1 and 2 |
|
|
F100-X-G3 series |
F100-A-G3, F100-C-G3, F100-E-G3, F100-M-G3, F100-S-G3 |
1 and 2 |
|
F100-X-G2 series |
F100-A-G2, F100-C-G2, F100-E-G2, F100-M-G2, F100-S-G2 |
1 and 2 |
|
F100-WiNet series |
F100-A80-WiNet, F100-C80-WiNet, F100-C60-WiNet, F100-C50-WiNet, F100-S80-WiNet |
1 and 2 |
|
F100-A81-WiNet, F100-A91-WiNet |
1 |
|
|
F100-C-A series |
F100-C-A6, F100-C-A5, F100-C-A3, F100-C-A6-WL, F100-C-A5-W, F100-C-A3-W |
1 and 2 |
|
F100-X-XI series |
F100-A-EI, F100-A-HI, F100-A-SI, F100-C-EI, F100-C-HI, F100-C-XI, F100-E-EI, F100-S-HI, F100-S-XI |
1 and 2 |
Usage guidelines
Do not enable the spanning tree feature on the monitor port of a mirroring group.
A Layer 2 or Layer 3 aggregate interface cannot be configured as the monitor port for a mirroring group.
Use a monitor port only for port mirroring, so the data monitoring device receives and analyzes only the mirrored traffic.
The member port of an existing mirroring group cannot be configured as a monitor port.
Examples
# Create local mirroring group 1 and configure GigabitEthernet 1/0/1 as its monitor port.
<Sysname> system-view
[Sysname] mirroring-group 1 local
[Sysname] interface gigabitethernet 1/0/1
[Sysname-GigabitEthernet1/0/1] mirroring-group 1 monitor-port
Related commands
mirroring-group
mirroring-group monitor-port (system view)
Use mirroring-group monitor-port to configure the monitor ports for a mirroring group.
Use undo mirroring-group monitor-port to remove the monitor ports from a mirroring group.
Syntax
mirroring-group group-id monitor-port interface-type interface-number
undo mirroring-group group-id monitor-port interface-type interface-number
Default
No monitor port is configured for a mirroring group.
Views
System view
Predefined user roles
network-admin
context-admin
Parameters
group-id: Specifies a mirroring group by its ID.
The following compatibility matrixes show the value ranges for the mirroring group ID:
|
F1000 series |
Models |
Value range |
|
F1000-X-G5 series |
F1000-A-G5, F1000-E-G5, F1000-H-G5, F1000-S-G5 |
1 and 2 |
|
F1000-C-G5, F1000-C-G5-LI |
1 |
|
|
F1000-X-G3 series |
F1000-A-G3, F1000-C-G3, F1000-E-G3, F1000-S-G3 |
1 and 2 |
|
F1000-X-G2 series |
F1000-A-G2, F1000-C-G2, F1000-E-G2, F1000-S-G2 |
1 and 2 |
|
F1000-9X0-AI series |
F1000-9390-AI, F1000-9385-AI, F1000-9380-AI, F1000-9370-AI, F1000-990-AI, F1000-980-AI, F1000-970-AI, F1000-960-AI, F1000-950-AI, F1000-930-AI, F1000-920-AI , F1000-910-AI, F1000-905-AI |
1 and 2 |
|
F1000-9360-AI, F1000-9350-AI, F1000-9330-AI, F1000-9320-AI |
1 |
|
|
F1000-C83X0 series |
F1000-C8395, F1000-C8390, F1000-C8385, F1000-C8380 |
1 and 2 |
|
F1000-C8370, F1000-C8360, F1000-C8350, F1000-C8330 |
1 |
|
|
F1000-C81X0 series |
F1000-C8180, F1000-C8170, F1000-C8160, F1000-C8150, F1000-C8130, F1000-C8120, F1000-C8110 |
1 and 2 |
|
F1000-7X0-HI series |
F1000-770-HI, F1000-720-HI, F1000-710-HI |
1 and 2 |
|
F1000-750-HI, F1000-740-HI, F1000-730-HI |
1 |
|
|
F1000-C-X series |
F1000-C-EI, F1000-C-HI, F1000-C-XI |
1 and 2 |
|
F1000-E-XI |
1 |
|
|
F1000-V series |
F1000-E-VG, F1000-S-VG |
1 and 2 |
|
SecBlade IV |
LSPM6FWD8, LSQM2FWDSC8 |
1 and 2 |
|
F100 series |
Models |
Value range |
|
F100-X-G5 series |
F100-A-G5, F100-E-G5 |
1 |
|
F100-C-G5, F100-M-G5, F100-S-G5 |
1 and 2 |
|
|
F100-X-G3 series |
F100-A-G3, F100-C-G3, F100-E-G3, F100-M-G3, F100-S-G3 |
1 and 2 |
|
F100-X-G2 series |
F100-A-G2, F100-C-G2, F100-E-G2, F100-M-G2, F100-S-G2 |
1 and 2 |
|
F100-WiNet series |
F100-A80-WiNet, F100-C80-WiNet, F100-C60-WiNet, F100-C50-WiNet, F100-S80-WiNet |
1 and 2 |
|
F100-A81-WiNet, F100-A91-WiNet |
1 |
|
|
F100-C-A series |
F100-C-A6, F100-C-A5, F100-C-A3, F100-C-A6-WL, F100-C-A5-W, F100-C-A3-W |
1 and 2 |
|
F100-X-XI series |
F100-A-EI, F100-A-HI, F100-A-SI, F100-C-EI, F100-C-HI, F100-C-XI, F100-E-EI, F100-S-HI, F100-S-XI |
1 and 2 |
interface-type interface-number: Specifies an interface by its type and number.
Usage guidelines
Do not enable the spanning tree feature on the monitor port of a mirroring group.
Use a monitor port only for port mirroring, so the data monitoring device receives only the mirrored traffic.
The member port of an existing mirroring group cannot be configured as a monitor port.
Examples
# Create local mirroring group 1 and configure GigabitEthernet 1/0/1 as its monitor port.
<Sysname> system-view
[Sysname] mirroring-group 1 local
[Sysname] mirroring-group 1 monitor-port gigabitethernet 1/0/1
Related commands
mirroring-group
