11-Network Management and Monitoring Command Reference

HomeSupportResource CenterReference GuidesCommand ReferencesH3C S6520X-EI[HI][SI] & S6520-SI & S5560X-HI Switch Series Command References-R65xx-6W10311-Network Management and Monitoring Command Reference
22-EPS agent commands
Title Size Download
22-EPS agent commands 43.35 KB

EPS agent commands

display eps agent discovery

Use display eps agent discovery to display scanned endpoint information.

Syntax

display eps agent discovery

Views

Any view

Predefined user roles

network-admin

network-operator

Examples

# Display scanned endpoint information.

<Sysname> display eps agent discovery

IP-Address       MAC-Address        OS-Type  OS-ver   Vendor    Product

100.100.100.100  cc:ef:48:9b:5f:c1  IOS      12.X     Cisco     C3560E

Table 1 Command output

Field

Description

IP-Address

Endpoint IP address.

MAC-Address

Endpoint MAC address.

OS-Type

Endpoint operating system type.

OS-ver

Endpoint operating system version.

Vendor

Endpoint vendor.

Product

Endpoint model.

 

eps agent enable

Use eps agent enable to enable EPS agent.

Use undo eps agent enable to disable EPS agent.

Syntax

eps agent enable

undo eps agent enable

Default

EPS agent is disabled.

Views

System view

Predefined user roles

network-admin

Usage guidelines

After you enable EPS agent on a scanner, the scanner scans and manages endpoints in its associated areas by following the instruction of the EPS server.

Examples

# Enable EPS agent.

<Sysname> system-view

[Sysname] eps agent enable

eps server

Use eps server to configure EPS server parameters.

Use undo eps server to restore the default.

Syntax

eps server ip-address port port-number [ key { cipher | simple } key-value ] [ log-level level-value ] [ use-server-setting ]

undo eps server

Default

EPS server parameters are not configured.

Views

System view

Predefined user roles

network-admin

Parameters

ip-address: Specifies the IP address of the EPS server.

port port-number: Specifies the port number of the EPS server, in the range of 1 to 65535.

key: Sets the key for communication between the scanner and the EPS server.

cipher: Specifies a key in encrypted form.

simple: Specifies a key in plaintext form. For security purposes, the key specified in plaintext form will be stored in encrypted form.

key-value: Specifies the key string. Its plaintext form is a case-sensitive string of 1 to 24 characters. Its encrypted form is a case-sensitive string of 1 to 65 characters.

log-level level-value: Specifies the level of logs sent to the EPS server, in the range of 0 to 5. A higher value represents more detailed log information.

use-server-setting: Specifies that the scanner uses the configured global parameter settings of the EPS server. If you do not specify this keyword, the scanner uses the default global parameter settings of the EPS server.

Usage guidelines

A scanner enabled with EPS agent automatically generates EPS logs to record the running conditions of the EPS agent. EPS logs are not sent to the information center of the scanner. To enable the scanner to send EPS logs to the EPS server for monitoring, specify the log-level level-value option.

Examples

# Specify 192.168.7.27 as the IP address of the EPS server, and 4500 as the port number of the EPS server.

<Sysname> system-view

[Sysname] eps server ip-address 192.168.7.27 port 4500