IP Routing Volume Organization

IP Routing Table Display

This document introduces the Display commands for IP Routing Table.

Static Routing

This document introduces the commands for Static Routing.

RIP

Routing Information Protocol (RIP) is a simple Interior Gateway Protocol (IGP), mainly used in small-sized networks.  This document introduces the commands for RIP configuration.

OSPF

Open Shortest Path First (OSPF) is an Interior Gateway Protocol based on the link state developed by IETF. This document introduces the commands for OSPF configuration.

IS-IS

Intermediate System-to-Intermediate System (IS-IS) is a link state protocol, which uses the shortest path first (SPF) algorithm. This document introduces the commands for IS-IS configuration.

BGP

Border gateway protocol (BGP) is an inter-autonomous system (inter-AS) dynamic route discovery protocol. This document introduces the commands for BGP configuration.

IPv6 Static Routing

Similar to IPv4 static routes, IPv6 static routes work well in simple IPv6 network environments. This document introduces the commands for IPv6 Static Routing configuration.

IPv6 RIPng

RIP next generation (RIPng) is an extension of RIP-2 for IPv4. RIPng for IPv6 is IPv6 RIPng. This document introduces the commands for RIPng configuration.

IPv6 OSPFv3

OSPFv3 is OSPF version 3 for short, supporting IPv6 and compliant with RFC2740 (OSPF for IPv6). This document introduces the commands for OSPFv3 configuration.

IPv6 IS-IS

IS-IS with IPv6 support is called IPv6 IS-IS dynamic routing protocol. This document introduces the commands for IPv6 IS-IS configuration.

IPv6 BGP

To support multiple network layer protocols, IETF extended BGP-4 by introducing IPv6 BGP. This document introduces the commands for IPv6 BGP configuration.

Route Policy

Routing policy is used on the router for route inspection, filtering, attributes modifying when routes are received, advertised, or redistributed. This document introduces the commands for Routing Policy configuration.