Title | Size | Downloads |
---|---|---|
H3C LSQ1TGX2SA0 Card Manual-6PW101-book.pdf | 21.42 KB |
- Table of Contents
2-port 10 Gigabit XFP Fiber Interface Ethernet Card–LSQ1TGX2SA0
1 Card identifier
The mark LSQ1TGX2SA0 is printed at the upper right corner of the front panel, and is used to identify the card.
2 Specifications
Table 1 LSQ1TGX2SA0 specifications
Item |
Specification |
Connector |
LC |
Port quantity |
Two 10GBASE-R-XFP Ethernet ports |
Interface transmission speed |
10 Gbps |
Type of XFP module |
See Table 2. |
Applied to |
S7500E Series Ethernet switches |
Host software version |
Release 6703 and Later |
For supported XFP modules, refer to the following table.
Table 2 XFP module specifications
Optional XFP module |
Central wavelength |
Connector |
Cable specifications |
Maximum transmission distance |
XFP-SX-MM850 |
850nm |
LC |
50/125 μm multimode fiber |
300 m (984.25 ft) |
XFP-LX-SM1310 |
1310nm |
LC |
9/125 μm single-mode fiber |
10 km (6.21 miles) |
XFP-LH40-SM1550 |
1550nm |
LC |
9/125 μm single-mode fiber |
40 km (24.86 miles) |
XFP-LH80-SM1550 |
1550nm |
LC |
9/125 μm single-mode fiber |
80 km (49.71 miles) |
XFP-LX-SM1538.98 |
1538.98 nm |
LC |
9/125 μm single-mode fiber |
80 km (49.71 miles) |
XFP-LX-SM1539.77 |
1539.77 nm |
LC |
9/125 μm single-mode fiber |
80 km (49.71 miles) |
XFP-LX-SM1540.56 |
1540.56 nm |
LC |
9/125 μm single-mode fiber |
80 km (49.71 miles) |
XFP-LX-SM1542.14 |
1542.14 nm |
LC |
9/125 μm single-mode fiber |
80 km (49.71 miles) |
XFP-LX-SM1542.94 |
1542.94 nm |
LC |
9/125 μm single-mode fiber |
80 km (49.71 miles) |
XFP-LX-SM1558.98 |
1558.98 nm |
LC |
9/125 μm single-mode fiber |
80 km (49.71 miles) |
XFP-LX-SM1559.79 |
1559.79 nm |
LC |
9/125 μm single-mode fiber |
80 km (49.71 miles) |
XFP-LX-SM1560.61 |
1560.61 nm |
LC |
9/125 μm single-mode fiber |
80 km (49.71 miles) |
|
NOTE: The 9/125μm single-mode fibers used by modules XFP-LX-SM1538.98 through XFP-LX-SM1560.61 should conform to ITU-T G.655, and those used by other modules should conform to ITU-T G.652. |
3 Obtaining documentation
For module installation, see H3C S7500E Switch Series Installation Guide.
To access the most up-to-date H3C product documentation, go to
http://www.h3c.com.hk/Technical_Documents
For software upgrade, see the release notes for the device.
To access the release notes, go to
http://www.h3c.com.hk/Software_Download