Title | Size | Downloads |
---|---|---|
H3C LSQ1GV24PSC0 Card Manual-V1.04-book.pdf | 31.09 KB |
- Table of Contents
20-port 10/100/1000Base-T + 4-port Combo Ethernet Card–LSQ1GV24PSC0
1 Card identifier
The card identifier LSQ1GV24PSC0 is at the upper right corner of the front panel.
2 Specifications
Table 1 LSQ1GV24PSC0 specifications
Item |
Specification |
Connector |
· LC · RJ-45 |
Ports |
· 20 x 10/100/1000Base-T Gigabit Ethernet ports · 4 x combo interfaces (Each combo interface has a 10/100/1000Base-T Gigabit Ethernet port and an SFP port, which cannot be simultaneously used. For combo interface mappings, see Table 2.) |
Port speed |
· 10/100/1000Base-T Gigabit Ethernet ports: 10/100/1000 Mbps · 1000Base-X-SFP/100Base-FX-SFP Ethernet ports: 1000/100 Mbps |
Transmission medium and maximum transmission distance |
· 10/100/1000Base-T Gigabit Ethernet ports: 100 m (328.08 ft) over category-5 twisted pair cable · 1000Base-X-SFP/100Base-FX-SFP Ethernet ports: See Table 3. |
Optional module |
24-port DIMM for PoE power management (LSQM1POEDIMMS0) This module enables the card to provide PoE power supply from 24 ports. |
Compatible device models |
S7500E Switch Series |
System software version |
Release 6600 and later |
Table 2 Combo interface mappings
1000Base-X-SFP/100Base-FX-SFP Ethernet port |
10/100/1000Base-T Gigabit Ethernet port |
1 |
5 |
2 |
6 |
3 |
7 |
4 |
8 |
Table 3 lists the SFP modules available for the 1000Base-X-SFP/100Base-FX-SFP Ethernet ports.
Table 3 SFP module specifications
Type |
Central wavelength |
Connector type |
Cable specifications |
Maximum transmission distance |
|
SFP-GE-SX-MM850-A |
850 nm |
LC |
50/125 μm multi-mode optical fiber |
550 m (1804.46 ft) |
|
62.5/125 μm multi-mode optical fiber |
275 m (902. 23 ft) |
||||
SFP-GE-LX-SM1310-A |
1310 nm |
LC |
9/125 μm single-mode optical fiber |
10 km (6.21 miles) |
|
SFP-GE-LH40-SM1310 |
1310 nm |
LC |
9/125 μm single-mode optical fiber |
40 km (24.86 miles) |
|
SFP-GE-LH40-SM1550 |
1550 nm |
LC |
9/125 μm single-mode optical fiber |
40 km (24.86 miles) |
|
SFP-GE-LH70-SM1550 |
1550 nm |
LC |
9/125 μm single-mode optical fiber |
70 km (43.50 miles) |
|
SFP-GE-LH100-SM1550 |
1550 nm |
LC |
9/125 μm single-mode optical fiber |
100 km (62.14 miles) |
|
SFP-GE-LX-SM1310-BIDI |
TX: 1310 nm RX: 1490 nm |
The two modules must be used in pairs. |
LC |
9/125 μm single-mode optical fiber |
10 km (6.21 miles) |
SFP-GE-LX-SM1490-BIDI |
TX: 1490 nm RX: 1310 nm |
LC |
9/125 μm single-mode optical fiber |
10 km (6.21 miles) |
|
SFP-GE-LH70-SM1470-CW |
1470 nm |
LC |
9/125 μm single-mode optical fiber |
70 km (43.50 miles) |
|
SFP-GE-LH70-SM1490-CW |
1490 nm |
LC |
9/125 μm single-mode optical fiber |
70 km (43.50 miles) |
|
SFP-GE-LH70-SM1510-CW |
1510 nm |
LC |
9/125 μm single-mode optical fiber |
70 km (43.50 miles) |
|
SFP-GE-LH70-SM1530-CW |
1530 nm |
LC |
9/125 μm single-mode optical fiber |
70 km (43.50 miles) |
|
SFP-GE-LH70-SM1550-CW |
1550 nm |
LC |
9/125 μm single-mode optical fiber |
70 km (43.50 miles) |
|
SFP-GE-LH70-SM1570-CW |
1570 nm |
LC |
9/125 μm single-mode optical fiber |
70 km (43.50 miles) |
|
SFP-GE-LH70-SM1590-CW |
1590 nm |
LC |
9/125 μm single-mode optical fiber |
70 km (43.50 miles) |
|
SFP-GE-LH70-SM1610-CW |
1610 nm |
LC |
9/125 μm single-mode optical fiber |
70 km (43.50 miles) |
|
SFP-FE-SX-MM1310-A |
1310 nm |
LC |
50/125 μm multi-mode optical fiber |
2 km (1.24 miles) |
|
62.5/125 μm multi-mode optical fiber |
|||||
SFP-FE-LX-SM1310-A |
1310 nm |
LC |
9/125 μm single-mode optical fiber |
15 km (9.32 miles) |
|
SFP-FE-LH40-SM1310 |
1310 nm |
LC |
9/125 μm single-mode optical fiber |
40 km (24.86 miles) |
|
SFP-FE-LH80-SM1550 |
1550 nm |
LC |
9/125 μm single-mode optical fiber |
80 km (49.71 miles) |
|
SFP-FE-LX-SM1310-BIDI |
TX: 1310 nm RX: 1550 nm |
The two modules must be used in pairs. |
LC |
9/125 μm single-mode optical fiber |
15 km (9.32 miles) |
SFP-FE-LX-SM1550-BIDI |
TX: 1550 nm RX: 1310 nm |
LC |
9/125 μm single-mode optical fiber |
15 km (9.32 miles) |
|
NOTE: · BIDI modules use different central wavelengths in transmit and receive directions to implement bidirectional transmission of optical signals over the same fiber. · BIDI modules must be used in pairs. For example, if an SFP-GE-LX-SM1310-BIDI is used at one end, an SFP-GE-LX-SM1490-BIDI must be used at the other end. |
3 Obtaining documentation
For module installation, see H3C S7500E Switch Series Installation Guide.
To access the most up-to-date H3C product documentation, go to
http://www.h3c.com.hk/Technical_Documents
For software upgrade, see the release notes for the device.
To access the release notes, go to
http://www.h3c.com.hk/Software_Download
Copyright © 2013-2017 New H3C Technologies Co., Ltd.