Title | Size | Downloads |
---|---|---|
LSQM3MPUA0 Card Manual-6PW105-book.pdf | 20.05 KB |
- Table of Contents
LSQM3MPUA0 management and route unit
1 Card identifier
The card identifier LSQM3MPUA0 is in the upper right corner of the front panel.
2 Specifications
|
IMPORTANT: To ensure successful installation, make sure you remove the protection cover from a card before installing the card. |
Table 1 LSQM3MPUA0 specifications
Item |
Specifications |
Flash |
1 GB |
SDRAM (DDR3) |
4 GB |
Card size (H × W × D) |
45 x 199 x 355 mm (1.77 × 7.83 × 13.98 in) |
Power consumption |
17 W to 23 W |
Ports |
· 1 console port · 1 network management port · 1 USB port |
Port speed |
· Console port: £ 115200 bps (default: 9600 bps) · Network management port: 10/100/1000 Mbps (half/full duplex) |
Transmission medium and max transmission distance |
· Console port: 15 m (49.21 ft) over ordinary asynchronous serial port cables · Network management port: 100 m (328.08 ft) over Category 5 or higher twisted pair cables |
Compatible device models |
S7502E |
Applicable host software versions |
Version 7150 and later |
|
NOTE: H3C recommends not using a USB extender cable to connect the USB port. |
3 Related documentation
For module installation, see H3C S7500E Switch Series Installation Guide.
For software upgrade, see the release notes for the device.
Copyright © 2014-2018 New H3C Technologies Co ., Ltd.
The information in this document is subject to change without notice.