About the S5120-HI Command References

HomeSupportSwitchesH3C S5120 Switch SeriesReference GuidesCommand ReferencesH3C S5120-HI Switch Series Command References-Release 5101-6W101About the S5120-HI Command References
Download Book

About the S5120-HI Command References

The H3C S5120-HI command references are part of the H3C S5120-HI documentation set. They describe the commands and command syntax options available for the H3C S5120-HI Switch Series Release 5101. The H3C S5120-HI documentation set includes 10 command references:

Command Reference

Content

01 Fundamentals Command Reference

Covers the commands for logging in to and setting up the Switch. This command reference includes:

·       CLI configuration commands

·       Login management commands

·       FTP configuration commands

·       TFTP client configuration commands

·       File system management commands

·       Configuration file management commands

·       Software upgrade commands

·       ISSU commands

·       Device management commands

02 IRF Command Reference

Covers the commands for configuring the H3C proprietary Intelligent Resilient Framework (IRF) technology features. It covers planning the switch roles in the IRF virtual device, connecting the IRF link, and detecting and maintaining the IRF virtual device.

03 Layer 2 – LAN Switching Command Reference

Covers the commands for configuring Layer 2 technologies and features in a LAN switched network. This command reference includes:

·       Ethernet interface configuration commands

·       Loopback and null interface configuration commands

·       Interface Range Commands

·       MAC address table configuration commands

·       MAC Information configuration commands

·       Ethernet iink aggregation configuration commands

·       Port isolation configuration commands

·       Spanning tree configuration commands

·       BPDU tunneling configuration commands

·       VLAN configuration commands

·       Isolate-user-VLAN configuration commands

·       Voice VLAN configuration commands

·       GVRP configuration commands

·       QinQ configuration commands

·       VLAN mapping configuration commands

·       LLDP configuration commands

04 Layer 3 – IP Services Command Reference

Covers the commands for configuring IP addressing, DHCP, IP performance optimization, ARP, DNS, IPv6 basics,UDP Helper and DHCPv6. This command reference includes:

·       ARP configuration commands

·       Gratuitous ARP configuration commands

·       Proxy ARP configuration commands

·       ARP snooping configuration commands

·       IP addressing configuration commands

·       DHCP server configuration commands

·       DHCP relay agent configuration commands

·       DHCP client configuration commands

·       DHCP snooping configuration commands

·       BOOTP client configuration commands

·       IPv4 DNS configuration commands

·       IRDP configuration commands

·       IP performance optimization configuration commands

·       UDP Helper configuration commands

·       IPv6 basics configuration commands

·       DHCPv6 configuration commands

·       IPv6 DNS configuration commands

05 Layer 3 – IP Routing Command Reference

Covers the routing configuration commands. This command reference includes:

·       Basic IP routing commands

·       Static routing configuration commands

·       IPv6 static routing configuration commands

06 IP Multicast Command Reference

Covers the commands for configuring Layer 2 multicast services. This command reference includes:

·       IGMP snooping configuration commands

·       PIM snooping configuration commands

·       Multicast VLAN configuration commands

·       MLD Snooping configuration commands

·       IPv6 PIM snooping configuration commands

·       IPv6 multicast VLAN configuration commands

07 ACL and QoS Command Reference

Covers the commands for classifying traffic with ACLs, and allocating network resources and managing congestions with QoS technologies to improve network performance and network use efficiency. This command reference includes:

·       ACL configuration commands

·       QoS policy configuration commands

·       Priority mapping configuration commands

·       GTS and line rate configuration commands

·       Congestion management configuration commands

·       Congestion avoidance configuration commands

·       Global CAR configuration commands

·       Data buffer configuration commands

·       HQoS configuration commands

08 Security Command Reference

Covers security feature commands. Available security features include identity authentication (AAA), access security (802.1X, MAC authentication, portal and port security), secure management (SSH), and attack protection (IP source guard, ARP attack protection, and URPF). This command reference includes:

·       AAA configuration commands

·       802.1X configuration commands

·       EAD fast deployment configuration commands

·       MAC authentication configuration commands

·       Portal configuration commands

·       Port security configuration commands

·       User profile configuration commands

·       Password control configuration commands

·       HABP configuration commands

·       Public key configuration commands

·       PKI configuration commands

·       IPsec configuration commands

·       SSH2.0 configuration commands

·       SSL configuration commands

·       TCP attack protection configuration commands

·       IP source guard configuration commands

·       ARP attack protection configuration commands

·       ND attack protection configuration commands

·       SAVI configuration commands

·       Blacklist configuration commands

09 High Availability Command Reference

Covers high availability commands for managing failure detection and failover. Failure detection technologies focus on fault detection and isolation. Failover technologies focus on network recovery. This command reference includes:

·       Ethernet OAM configuration commands

·       CFD configuration commands

·       DLDP configuration commands

·       RRPP configuration commands

·       Smart Link configuration commands

·       Monitor Link configuration commands

·       Track configuration commands

10 Network Management and Monitoring Command Reference

Covers the commands that help you manage and monitor your network, for example, manage system events, sample packets, assess network performance, synchronize the clock for all devices with the clock in the network, supply power for attached devices by using PoE, and test network connectivity. This command reference includes:

·       System maintenance and debugging commands

·       NTP configuration commands

·       Information center configuration commands

·       SNMP configuration commands

·       MIB configuration commands

·       RMON configuration commands

·       Port mirroring configuration commands

·       Traffic mirroring configuration commands

·       NQA configuration commands

·       sFlow configuration commands

·       IPC configuration commands

·       Cluster management configuration commands

·       CWMP configuration commands

 

  • Cloud & AI
  • InterConnect
  • Intelligent Computing
  • Security
  • SMB Products
  • Intelligent Terminal Products
  • Product Support Services
  • Technical Service Solutions
All Services
  • Resource Center
  • Policy
  • Online Help
All Support
  • Become a Partner
  • Partner Resources
  • Partner Business Management
All Partners
  • Profile
  • News & Events
  • Online Exhibition Center
  • Contact Us
All About Us
新华三官网