1 Identifier

The module identifier NS-C100-CGQ2A1 is in the upper right corner of the front panel.

2 About the module

The NS-C100-CGQ2A1 interface module provides two 100-GE fiber ports.

Figure 1 Front panel

(1) 100-GE fiber ports	(2) Ejector lever
(3) 100-GE fiber port LEDs	(4) Captive screw

Table 1 Module specifications

Item	Specifications
Dimensions (H × W × D)	37.4 × 174 × 192 mm (1.47 × 6.85 × 7.56 in)
Power consumption	8 W to 12 W
Net weight	0.7 Kg (1.54 lb)
Hot swapping	Not supported
Ports	2 × 100-GE fiber ports
Connector type	LC
Available transceiver modules	See Table 2.
Compatible devices and slots	M9000-AI-E4 multiservice security gateway (subslot 3)

Table 2 describes the QSFP28 transceiver modules available for the 100-GE fiber ports.

The module provides a LED for each 10-GE fiber port to indicate its link and data forwarding status.

Table 3 LED description

LED mark	Status	Description
ACT	Flashing	The port is sending or receiving data.
	Steady on	A link is present on the port.
	Off	No link is present on the port.

For information about installing the module, see the installation guide for the device.

The information in this document is subject to change without notice.